summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)Author
2016-02-25arm64: dts: hip05: Append power button node for D02 boardKefeng Wang
This patch adds poweroff button device node to support poweroff feature on hip05 d02 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-02-25arm64: dts: hip05: Append gpio nodesKefeng Wang
There are two dw GPIO controllers in hip05 peri sub, this patch adds the corresponding device tree nodes. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-02-25arm64: dts: hip05: Append all gicv3 ITS entriesKefeng Wang
There are four subsystems in hip05 soc, peri/m3/pcie/dsa, each subsystem has one its, append them under gicv3 node. They will be used by hisilicon mbigen. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-02-25arm64: dts: hip05: Use Cortex specific device node for pmuKefeng Wang
Instead of using the generic armv8-pmuv3 compatibility, use the more specific Cortex A57 compatibility. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-02-25arm64: dts: hip05: Add L2 cache topologyKefeng Wang
The Hip05 SoC has four L2 cache for all 16 CPUs, every four cpus share one L2 cache, add them to the dtsi file so that the cache hierarchy can be probed. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-01-23Merge tag 'armsoc-tegra' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols
2016-01-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-21Merge tag 'armsoc-dt64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Olof Johansson: "This is the first release where we split up the 64-bit contributions a bit more, and in particular we are having a separate DT branch for them. Contents: - New devices added to Broadcom NorthStar2 - Misc fixes for Exynos7 boards - QCOM updates for MSM8916 - Rockchip tweaks for rk3368 SoC and eval board - A series of fixes for APM X-Gene v1 and v2 - Renesas R8A7795 CPU/PSCI additions - Marvell Berlin4CT PSCI, cpuidle, watchdog portions - Freescale LS1043a SoC and dev board support + some treewide or other misc changes" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits) dts/ls2080a: Update DTSI to add support of SP805 WDT Documentation: DT: Add entry for ARM SP805-WDT arm64: dts: X-Gene v2: I2C1 clock is always on arm64: dts: X-Gene v1: I2C0 clock is always on arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms arm64: dts: hikey: add label properties to UARTs arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI arm64: dts: apq8016-sbc: enable UART0 on LS connector arm64: dts: juno: Add idle-states to device tree arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC arm64: dts: add LS1043a-RDB board support arm64: dts: add Freescale LS1043a SoC support Documentation: DT: Add entry for Freescale LS1043a-RDB board arm64: dts: uniphier: add PH1-LD10 SoC/board support arm64: renesas: r8a7795: fix SATA clock assignment arm64: dts: salvator-x: Enable SATA controller arm64: dts: r8a7795: Add SATA controller node arm64: renesas: r8a7795: add internal delay for i2c IPs arm64: renesas: salvator-x: Add board part number to DT bindings arm64: dts: r8a7795: Add pmu device nodes ...
2016-01-21Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
2016-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A quick set of bug fixes after there initial networking merge: 1) Netlink multicast group storage allocator only was tested with nr_groups equal to 1, make it work for other values too. From Matti Vaittinen. 2) Check build_skb() return value in macb and hip04_eth drivers, from Weidong Wang. 3) Don't leak x25_asy on x25_asy_open() failure. 4) More DMA map/unmap fixes in 3c59x from Neil Horman. 5) Don't clobber IP skb control block during GSO segmentation, from Konstantin Khlebnikov. 6) ECN helpers for ipv6 don't fixup the checksum, from Eric Dumazet. 7) Fix SKB segment utilization estimation in xen-netback, from David Vrabel. 8) Fix lockdep splat in bridge addrlist handling, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) bgmac: Fix reversed test of build_skb() return value. bridge: fix lockdep addr_list_lock false positive splat net: smsc: Add support h8300 xen-netback: free queues after freeing the net device xen-netback: delete NAPI instance when queue fails to initialize xen-netback: use skb to determine number of required guest Rx requests net: sctp: Move sequence start handling into sctp_transport_get_idx() ipv6: update skb->csum when CE mark is propagated net: phy: turn carrier off on phy attach net: macb: clear interrupts when disabling them sctp: support to lookup with ep+paddr in transport rhashtable net: hns: fixes no syscon error when init mdio dts: hisi: fixes no syscon fault when init mdio net: preserve IP control block during GSO segmentation fsl/fman: Delete one function call "put_device" in dtsec_config() hip04_eth: fix missing error handle for build_skb failed 3c59x: fix another page map/single unmap imbalance 3c59x: balance page maps and unmaps x25_asy: Free x25_asy on x25_asy_open() failure. mlxsw: fix SWITCHDEV_OBJ_ID_PORT_MDB ...
2016-01-15dts: hisi: fixes no syscon fault when init mdioyankejian
When linux start up, we get the log below: "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl mdio_bus mdio@803c0000: mdio sys ctl reg has not maped" The source code about the subctrl is dealt syscon, but dts doesn't. It cause such fault, so this patch adds the syscon info on dts files to fixes it. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-31Merge tag 'xgene-dts-fixes-for-v4.5' of ↵Arnd Bergmann
https://github.com/AppliedMicro/xgene-next into next/dt64 Merge "Fixes for X-Gene DTS for v4.5" from Duc Dang: This patch set fixes the node names of X-Gene I2C, GPIO controller DT nodes; and also removes I2C clock nodes as the same clock is shared between 2 I2C controllers on X-Gene SoC. * tag 'xgene-dts-fixes-for-v4.5' of https://github.com/AppliedMicro/xgene-next: arm64: dts: X-Gene v2: I2C1 clock is always on arm64: dts: X-Gene v1: I2C0 clock is always on arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
2015-12-31dts/ls2080a: Update DTSI to add support of SP805 WDTBhupesh Sharma
This patch updates the LS2080a DTSI (DTS Include) file to add support for eight SP805 Watchdog units which can be used to reset the eight Cortex-A57 cores available on LS2080A. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-30arm64: dts: X-Gene v2: I2C1 clock is always onDuc Dang
X-Gene v2 I2C0 and I2C1 controllers share the same clock enable register field. This patch remove clock node for I2C1 and leave I2C1 clock always on as having it toggled on/off will affect I2C0 operation. Signed-off-by: Duc Dang <dhdang@apm.com>
2015-12-30arm64: dts: X-Gene v1: I2C0 clock is always onDuc Dang
X-Gene v1 I2C0 and I2C1 controllers share the same clock enable register field. This patch remove clock node for I2C0 and leave I2C0 clock always on as having it toggled on/off will affect I2C1 operation. Signed-off-by: Duc Dang <dhdang@apm.com>
2015-12-29arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 ↵Duc Dang
platforms Use devicetree standard node name for I2C (i2c@...), GFC GPIO (gpio@...), DW GPIO (gpio@...), Standby GPIO (gpio@...). The DT node name of USB (dwusb@...) still needs to be kept to maintain backward compatibility with old firmware. Signed-off-by: Duc Dang <dhdang@apm.com>
2015-12-22Merge tag 'v4.5-rockchip-dts64-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 New node for the broadcast-timer of the rk3368, a non-critical fix for a regulator voltage and a typo fix. * tag 'v4.5-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add the broadcast-timer for RK3368 SoC arm64: dts: rockchip: Fix typo in rk3368 sdmmc card detect pin name arm64: dts: rockchip: correct voltage range for rk3368-evb-act8846 board Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'v4.4-next-arm64' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/dt64 Update psci support to the arm,psci-1.0 to mt8173 Add display PWM driver to mt8173 Add mediatek general porpose timer to mt8173 * tag 'v4.4-next-arm64' of https://github.com/mbgg/linux-mediatek: arm64: dts: mediatek: mt8173 PSCI-1.0 support arm64: dts: mt8173: add MT8173 display PWM driver support node arm64: dts: mt8173: add timer node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'renesas-arm64-dt3-for-v4.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Third Round of Renesas ARM64 Based SoC DT Updates for v4.5 * Enable SATA * Add salvator-x part number to DT bindings documentation * Enable all four A57 cores instead of just one * Enhanced audio support: - Use CS2000 as AUDIO_CLK_B - Set ak4613 In/Out pin as single-end * tag 'renesas-arm64-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: renesas: r8a7795: fix SATA clock assignment arm64: dts: salvator-x: Enable SATA controller arm64: dts: r8a7795: Add SATA controller node arm64: renesas: r8a7795: add internal delay for i2c IPs arm64: renesas: salvator-x: Add board part number to DT bindings arm64: dts: r8a7795: Add pmu device nodes arm64: dts: r8a7795: Add Cortex-A57 CPU cores arm64: dts: r8a7795: Add PSCI node arm64: renesas: salvator-x: use CS2000 as AUDIO_CLK_B arm64: renesas: salvator-x: set ak4613 In/Out pin as single-end Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'qcom-arm64-for-4.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Qualcomm ARM64 Updates for v4.5 * Add fixed rate oscillators to dts * Fixup PMIC alias and properties * Change 8916-MTP compatible to be compliant with new scheme * Fix 8x16 UART pinctrl configuration * Add SMEM, RPM/SMD, and PM8916 support on MSM8916 * tag 'qcom-arm64-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: Add PM8916 support on MSM8916 arm64: dts: qcom: Add RPM/SMD support on MSM8916 arm64: dts: qcom: Add MSM8916 SMEM nodes arm64: dts: set the default i2c pin drive strength to 16mA arm64: dts: fix the i2c aliasing to match to schematics. arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators arm64: dts: qcom: Alias pm8916 on msm8916 devices arm64: dts: qcom: Make msm8916-mtp compatible string compliant arm64: dts: qcom: 8x16: UART1 and UART2 use DMA for RX and TX arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'zynqmp-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
next/dt64 arm: Xilinx ZynqMP dt patches for v4.5 - Label GPIO controller as interrupt controller * tag 'zynqmp-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx: ARM64: zynqmp: DT: Add interrupt-controller property to GPIO Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: hikey: add label properties to UARTsRob Herring
Add label properties to provide a way to identify UARTs based on their board or connector name. This follows naming convention in 96boards CE spec. Ports without external connections are not labelled. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPIRob Herring
Add label properties to provide a way to identify UART, I2C and SPI ports based on their connector names. This follows naming convention in 96boards CE spec. Ports without external connections are not labelled. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Andy Gross <agross@codeaurora.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: apq8016-sbc: enable UART0 on LS connectorRob Herring
The LS UART0 is not used by anything else and should be enabled for expansion boards. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Andy Gross <agross@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: juno: Add idle-states to device treeJon Medhurst (Tixy)
This patch adds idle-states bindings data collected through a set of benchmarking experiments (latency and energy consumption) on Juno boards. Latencies data represents the worst case scenarios as required by the DT idle-states bindings. Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: Added syscon-reboot node for FSL's LS2080A SoCJ. German Rivera
Added sys-reboot node to the FSL's LS2080A SoC DT to leverage the ARM-generic reboot mechanism for this SoC. This mechanism is enabled through CONFIG_POWER_RESET_SYSCON. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: add LS1043a-RDB board supportShaohui Xie
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: add Freescale LS1043a SoC supportMingkai Hu
LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks are similar to LS1021a which also complies to Freescale Chassis 2.1 spec. Created LS1043a SoC DTSI file to be included by board level DTS files. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'samsung-dt64-4.5' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 updates and improvements for 4.5: 1. Add S2MPS15 PMIC node to Espresso board. This gives proper control over regulators, provides 32KHz clocks and RTC driver. 2. Enable HS200 mode operation on Espresso board for MMC0. 3. Add reboot capability (generic syscon-reboot). * tag 'samsung-dt64-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: Add reboot node for exynos7 arm64: dts: Enable HS200 mode operation on exynos7-espresso arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22arm64: dts: uniphier: add PH1-LD10 SoC/board supportMasahiro Yamada
This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-18arm64: renesas: r8a7795: fix SATA clock assignmentUlrich Hecht
SATA clock is 815, not 915. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-18arm64: dts: salvator-x: Enable SATA controllerKouei Abe
This enables SATA device in r8a7795-salvator-x.dts. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-18arm64: dts: r8a7795: Add SATA controller nodeKouei Abe
This adds SATA device node to r8a7795.dtsi. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> [uli: adjusted for new MSTP clock scheme] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-18arm64: renesas: r8a7795: add internal delay for i2c IPsWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-18arm64: dts: r8a7795: Add pmu device nodesYoshifumi Hosoya
Enabling the performance monitor unit on r8a7795. Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-18arm64: dts: r8a7795: Add Cortex-A57 CPU coresGaku Inami
Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57. Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-18arm64: dts: r8a7795: Add PSCI nodeGaku Inami
Add PSCI node for r8a7795 SoC, and cpu node enable-method property is set to "psci". Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-17arm64: dts: Add PM8916 support on MSM8916Andy Gross
This patch adds the PM8916 regulator nodes found on MSM8916 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-17arm64: dts: qcom: Add RPM/SMD support on MSM8916Andy Gross
Add support for the SMD and RPM devices found on MSM8916 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-17arm64: dts: qcom: Add MSM8916 SMEM nodesAndy Gross
This patch adds the nodes necessary to support the SMEM driver on MSM8916 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-17arm64: dts: set the default i2c pin drive strength to 16mASrinivas Kandagatla
2mA drive strength is not enough when we connect multiple i2c devices on the bus with different pull up resistors. This issue was detected when multiple i2c devices connected on the other side of level shifters on Linaro sensor board. Maxing up to 16mA made i2c much stable. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2015-12-17arm64: dts: fix the i2c aliasing to match to schematics.Srinivas Kandagatla
This patch fixes the i2c bus number aliasing so that it matches with the schematics bus naming. Without this patch the user might would get bus numbers depending on the order the devices are probed. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2015-12-17arm64: dts: qcom: msm8916: Add fixed rate on-board oscillatorsGeorgi Djakov
Currently the rates of the xo and sleep clocks are hard-coded in the GCC driver, but this is a board layout description that actually should be in the DT. Moving them into DT also allows us to insert the RPM controlled clocks between the DT and GCC clocks. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-17arm64: dts: qcom: Alias pm8916 on msm8916 devicesStephen Boyd
Add an alias for pm8916 on msm8916 based SoCs so that the newly updated dtbTool can find the pmic compatible string and add the pmic-id element to the QCDT header. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-17arm64: dts: qcom: Make msm8916-mtp compatible string compliantStephen Boyd
This compatible string isn't compliant with the format for subtypes. Replace it with a compliant compatible type. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-14ARM64: zynqmp: DT: Add interrupt-controller property to GPIOSoren Brinkmann
GPIO can be used as interrupt-controller. Add the missing properties to the GPIO node. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-14Merge 4.4-rc5 into usb-next as we want those fixes here for testingGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-12arm64: dts: rockchip: Add the broadcast-timer for RK3368 SoCCaesar Wang
There is a need of a broadcast timer in this case to ensure proper wakeup when the cpus are in sleep mode and a timer expires. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-12ls2080a/dts: Add little endian property for GPIO IP blockLiu Gang
The GPIO block for ls2080a platform has little endian registers, the GPIO driver needs this property to read/write registers by right interface. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-12-12ARM64: dts: ls2080a: fix eSDHC endiannessyangbo lu
Add the "little-endian" property to fix the issue that eSDHC is not working and dumping out "mmc0: Controller never released inhibit bit(s)." error messages constantly. Fixes: 5461597f6ce0 ("dts/ls2080a: Update DTSI to add support of various peripherals") Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
generated by cgit v0.10.2 at 2024-07-09 21:24:14 (GMT)