summaryrefslogtreecommitdiff
path: root/arch/arm64/configs
AgeCommit message (Collapse)Author
2017-07-14config: arm64: open CONFIG_CLK_QORIQZhao Qiang
add CONFIG_CLK_QORIQ=y to arch/arm64/configs/defconfig Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
2017-07-14config: add dpaa config to lsdk.configZhao Qiang
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
2017-07-14arm64: defconfig: enable CONFIG_GPIO_MPC8XXXZhang Ying-22455
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
2017-07-14lsdk.defconfig: Enable DPAA2 eth and macBogdan Purcareata
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
2017-07-14arm64: defconfig: enable RTC_DRV_DS1307 and FTM_ALARMZhang Ying-22455
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
2017-07-14arm64: config: add lsdk.config and update defconfigShengzhou Liu
Add lsdk.config and update defconfig for LSDK Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-06-08arm64: kdump: enable kdump in defconfigAKASHI Takahiro
Kdump is enabled by default as kexec is. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-19Merge tag 'zte-defconfig64-4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64 Pull "ZTE arm64 defconfig updates for 4.9" from Shawn Guo: - Enable ZTE ZX family support in arm64 defconfig * tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: enable ZTE ZX related config
2016-09-16arm64: defconfig: enable ZTE ZX related configJun Nie
This patch enables the configuration for the ZTE ZX family. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-14Merge tag 'renesas-arm64-defconfig-for-v4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.9" from Simon Horman: * Enable HSUSB and SDHI * tag 'renesas-arm64-defconfig-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: Enable SDHI and GPIO_REGULATOR arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
2016-09-14arm64: defconfig: enable common modules for power managementLeo Yan
Enable common modules for power management; one is to enable CPUFREQ_DT driver; the driver is used by many platforms by passing OPP table from device tree. Also enables thermal related drivers. Firstly we need enable configuration CPU_THERMAL for CPU cooling device driver, this will bind thermal zone with CPU cooling device; and enable 'power allocator' thermal governor. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-14Merge tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann
into next/arm64 Pull "mvebu defconfig64 for 4.9 (part 1)" from Gregory CLEMENT: - add PCIe driver for Aardvark for Armada 3700 - enable xhci-platform for A7K/A8K * tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu: arm64: configs: enable PCIe driver for Aardvark arm64: defconfig: enable xhci-platform
2016-09-14Merge tag 'qcom-arm64-defconfig-for-4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/arm64 Pull "Qualcomm ARM64 Based defconfig Updates for v4.9" from Andy Gross: * Enable defconfig options for QDF2432 * tag 'qcom-arm64-defconfig-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: defconfig: Enable QDF2432 config options
2016-09-14arm64: defconfig: enable meson I2CKevin Hilman
Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-14arm64: defconfig: enable meson SPI as moduleKevin Hilman
Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-14arm64: defconfig: enable meson WDT as modulesKevin Hilman
Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-14arm64: defconfig: enable HW random as moduleKevin Hilman
drivers/char/hw_random/Kconfig has 'default m', so simply removing this entry from the defconfig will enable building HW random drivers as modules. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-14Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/arm64 Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu: - Enable hisilicon SAS and XGE for hip05 and hip06 - Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey - Add PINCTRL to HISI platform * tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi: Kconfig: ARCH_HISI: Add PINCTRL to HISI platform arm64: defconfig: enable bluetooth supports as modules arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey arm64: defconfig: Enable Hisi SAS and HNS
2016-09-01arm64: defconfig: Enable SDHI and GPIO_REGULATORSimon Horman
This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs and already enabled in the DT of the r8a7795/salvator-x (H3). Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-26arm64: configs: enable PCIe driver for AardvarkGregory CLEMENT
This patch enables the driver for the PCIe host controller found on the Marvell Armada 3700 ARM64 SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-08-24arm64: defconfig: enable bluetooth supports as modulesGuodong Xu
Enable the following items for bluetooth mouse and speaker which base on HCIUART. a) CONFIG_BT_HCIUART b) CONFIG_BT_HCIUART_LL c) CONFIG_BT_HIDP Enable bluetooth LED support. d) CONFIG_BT_LEDS Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKeyGuodong Xu
Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKeyGuodong Xu
Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511 Build these components as modules. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24arm64: defconfig: Enable Hisi SAS and HNSKefeng Wang
Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-23arm64: defconfig: Enable QDF2432 config optionsChristopher Covington
Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-12arm64: defconfig: enable CONFIG_LOCALVERSION_AUTOMasahiro Yamada
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is just a tag name (or with a '+' appended if HEAD is not a tagged commit). During the development (and especially when git-bisecting), longer version string would be helpful to identify the commit we are running. This is a default y option, so drop the unset to enable it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-12arm64: defconfig: add options for virtualization and containersRiku Voipio
Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-11arm64: defconfig: Add Renesas R-Car HSUSB driver support as moduleYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-08arm64: defconfig: enable xhci-platformThomas Petazzoni
Some ARM64 platforms (for example the Marvell Armada 7K/8K) use the generic XHCI platform driver, so it makes sense to enable CONFIG_USB_XHCI_PLATFORM=y in the defconfig to support XHCI on such platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-01Merge tag 'armsoc-arm64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull 64-bit ARM SoC updates from Olof Johansson: "Changes to platform code for 64-bit ARM platforms. Nearly all of these are defconfig updates to enable new drivers or old drivers still used on these 64-bit platforms. Added platforms for this release are: - Broadcom BCM2837 - Renesas R8A7796" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: remove duplicate PWM entry in defconfig arm64: Update default configuration arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 arm64: amlogic: select gxbb clk driver arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver arm64: marvell: enable Armada 3700 clock drivers arm64: defconfig: enable msm8996 pinctrl support arm64: defconfig: Enable qcom msm8996 clk drivers arm: defconfig: Enable PM8941 pwr key arm64: defconfig: enable stmmac and realtek PHY as modules arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS arm64: defconfig: enable SENSORS_ARM_SCPI arm64: defconfig: enable Generic on-chip SRAM driver arm64: configs: enable PCIe driver for Armada 7K/8K arm64: Add platform selection for BCM2835. arm64: defconfig: disable plain NEON implementation of AES arm64: Allow for different DMA and CPU bus offsets arm64: defconfig: enable Renesas R8A7796 SoC arm64: defconfig: Enable Cadence MACB/GEM support ARM64: Kconfig: Select the Amlogic Meson pin controller driver ...
2016-07-15arm64: remove duplicate PWM entry in defconfigArnd Bergmann
We merged two patches that both enabled CONFIG_PWM, leading to a harmless warning: arch/arm64/configs/defconfig:352:warning: override: reassigning to symbol PWM This removes one of the two identical lines to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-07-14Merge tag 'tegra-for-4.8-arm64-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/arm64 Merge "arm64: tegra: Default configuration updates for v4.8-rc1" from Thierry Reding: Enable a bunch of configuration options to enable PMIC, regulators, DSI, HDMI, XUSB and the GPU on Jetson TX1 as well as a few new features that are now functional on the Google Pixel C. * tag 'tegra-for-4.8-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: Update default configuration
2016-07-14Merge tag 'samsung-defconfig64-4.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64 Merge "Samsung defconfig updates for ARM64" from Krzysztof Kozlowski: - enable drivers for Exynos7 and Exynos5433 based boards: 1. S2MPS clock driver, 2. SoC: RTC, SPI, watchdog, EHCI, OHCI, DWC3, ADC and PWM, 3. Enable Samsung SoC sound. * tag 'samsung-defconfig64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
2016-07-11arm64: Update default configurationThierry Reding
Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-07-11arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433Krzysztof Kozlowski
Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-07Merge tag 'renesas-arm64-defconfig-for-v4.8' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Renesas ARM64 Based SoC Defconfig Updates for v4.8 * Enable Renesas R8A7796 SoC in ARM64 defcnfig * tag 'renesas-arm64-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: enable Renesas R8A7796 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-06arm64: defconfig: Enable S2MPS11 clock and S3C RTC driverAlim Akhtar
The S3C RTC controller on Exynos7 platform uses RTC source clock from S2MPS11 PMIC. This patch enables the required drivers to make RTC work on Exynos7 Espresso board. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-05Merge tag 'qcom-arm64-defconfig-for-4.8' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/arm64 Qualcomm ARM64 Based defconfig Updates for v4.8 * Enable PM8xxx pwrkey support * Enable MSM8996 support * tag 'qcom-arm64-defconfig-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: defconfig: enable msm8996 pinctrl support arm64: defconfig: Enable qcom msm8996 clk drivers arm: defconfig: Enable PM8941 pwr key Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-05Merge tag 'juno-defconfig-4.8' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/arm64 ARMv8 Juno/Vexpress defconfig updates for v4.8 1. Enable support for SCPI based sensors(temperature, voltage, current and power) 2. Enable the Generic on-chip SRAM driver. SRAM is used for SCPI based communication with SCP on Juno * tag 'juno-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: defconfig: enable SENSORS_ARM_SCPI arm64: defconfig: enable Generic on-chip SRAM driver Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-05Merge tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu ↵Olof Johansson
into next/arm64 mvebu defconfig64 for 4.8 (part 1) - Enable the PCIe host controller found on the Armada 7K/8K SoCs * tag 'mvebu-defconfig64-4.8-1' of git://git.infradead.org/linux-mvebu: arm64: configs: enable PCIe driver for Armada 7K/8K Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-27arm64/kexec: Enable kexec in the arm64 defconfigGeoff Levand
Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-25arm64: defconfig: enable msm8996 pinctrl supportSrinivas Kandagatla
This patch enables pinctrl support required to boot msm8996/apq8096 boards. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-25arm64: defconfig: Enable qcom msm8996 clk driversStephen Boyd
Enable the clk drivers on msm8996. This allows us to boot and test most device drivers on this SoC. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-25arm: defconfig: Enable PM8941 pwr keyAndy Gross
This patch enables the PM8941 pwr key driver. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-23arm64: defconfig: enable stmmac and realtek PHY as modulesKevin Hilman
Some Amlogic GXBB boards use the stmmac ethernet driver. Also, enable the realtek PHY used on meson-gxbb-odroidc2. The micrel PHY used on the meson-gxbb-p20x boards is already enabled. Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-06-20arm64: defconfig: enable SENSORS_ARM_SCPIJavi Merino
ARM SCPI Sensors were merged for v4.4 and they are defined in the Juno dts. Enable it in the defconfig to get them registered automatically in Juno by default. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-20arm64: defconfig: enable Generic on-chip SRAM driverSudeep Holla
Most of the ARM SoCs have small SRAM memory used for various purposes that require faster access to data compared to normal DDR. This patch enables the Generic on-chip SRAM driver on ARM64. Cc: Kevin Hilman <khilman@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-16arm64: configs: enable PCIe driver for Armada 7K/8KThomas Petazzoni
This patch enables the driver for the PCIe host controller found on the Marvell Armada 7K/8K ARM64 SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-06-14arm64: defconfig: disable plain NEON implementation of AESArd Biesheuvel
The plain NEON implementation of AES is only suited for v8 cores that lack the ARMv8 Crypto Extensions but have an implementation of the NEON tbl/tbx instruction that is not pathetically slow. Unfortunately, this is currently the empty set, so there is no point in including this implementation by default. So disable it. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-06arm64: defconfig: enable Renesas R8A7796 SoCTakeshi Kihara
This patch enables the Renesas R8A7796 SoC in the arm64 defconfig. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v0.10.2 at 2024-07-09 05:53:01 (GMT)