Age | Commit message (Collapse) | Author |
|
Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
|
|
LS1088AQDS consist of NOR, NAND and FPGA connected over IFC
LS1088ARDB consist of NAND and FPGA connected over IFC.
So add flash information in ifc node of device tree.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
|
|
This is temporary patch, will rewrite for open source
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
|
|
This patch add support for NXP LS2081ARDB board which has
LS2081A SoC.
LS2081A SoC is 40-pin derivative of LS2088A SoC
So, from functional perspective both are same.
Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
|
|
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
|
|
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
|
|
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
|
|
Fix the issue that usb is not detected on ls1088ardb
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
|
|
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
|
|
For the patch to update struct map_info's swap field based on device
characteristics defined in device tree, CONFIG_MTD_CFI_BE_BYTE_SWAP
is not used.
This patch will remove it in lsdk.config.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
|
|
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
|
|
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
|
|
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
|
|
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
This patch adds SAI and eDMA support in the defconfig.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
This patch allows user-space to mmap PCI resources. This
patch is inline to arm32 bit implementation.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
|
|
For the patch to update struct map_info's swap field based on device
characteristics defined in device tree, big-endian parameter is added
for LS1043A/LS1046A.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
|
|
Signed-off-by: Haiying Wang <Haiying.wang@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@nxp.com>
|
|
[arch part]
On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode.
When chip support the aer/pme interrupts with none MSI/MSI-X/INTx mode,
maybe there is interrupt line for aer pme etc. Search the interrupt
number in the fdt file. Then fixup the dev->irq with it.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Add USDPAA device trees for LS1043/LS1046 RDB boards
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Add the DPAA 1.x FMan device tree nodes for LS1046A boards.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Add the DPAA 1.x FMan device tree nodes for LS1043A boards.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Add the DPAA 1.x FMan nodes for the ARM based platforms.
Using separate files for each port as not all ports are used on all
devices. Different numbering of ports is also possible on different
devices.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
commit bb18179284750ab91ef70172e87a722fcef9e1f4
[context adjustment]
Add the QBMan device tree nodes for LS1046A devices.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
Add the DPAA 1.x DPAA QMan and BMan portal nodes.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
|
|
The base address of watchdog unit is incorrect lead to the
watchdog timer is not registered.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Add esdhc node for ls1088a and enable it on both RDB and QDS boards.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
Currently SD UHS-I modes were enabled by default on LS208xARDB boards,
but the new LS2088ARDB RevF board didn't support them any more since SDHC
circuit had been reworked. This patch is to disable SD UHS-I modes by default
in case of any issue on LS2088ARDB RevF
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
1. Remove ls1043a compatible string from node
2. Fix the sata ecc register address error
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
|
|
LS208xA has a SEC v5.1 security engine.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
aliases node is identical for all boards, thus move it
to the common file ls208xa.dtsi.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
LS1088A has a SEC v5.3 security engine.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
|
|
Add mdio and phy nodes for the following FSL platforms:
- LS1088A RDB
- LS2080A QDS & RDB
- LS2088A QDS, RDB & simu
Contains contributions from patches by the following authors:
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
Signed-off-by: Constantin Tudor <constantin.tudor@nxp.com>
|
|
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
|
|
Some DWC3 platform has DMA snooping feature.
Therefore, add property "snps,dma-snooping" to enable it.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
|
|
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
There are eight cores in ls1088a and each core has an watchdog,
ls1088a can use sp805-wdt driver, so we just add DT node for it.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|