summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-04-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock ARM: 6031/1: fix Thumb-2 decompressor ARM: 6029/1: ep93xx: gpio.c: local functions should be static ARM: 6028/1: ARM: add MAINTAINERS for U300 ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c MXC: mach_armadillo5x0: Add USB Host support. ARM mach-mx3: duplicated include ARM mach-mx3: duplicated include imx31: add watchdog device on litekit board. imx3: Add watchdog platform device support MXC: mach-mx31_3ds: add support for freescale mc13783 power management device. MXC: mach-mx31_3ds: Add SPI1 device support. MXC: mach-mx31_3ds: Add support for on board NAND Flash. MXC: mach-mx31_3ds: Update variable names over recent mach name modification. imx31: fix parent clock for rtc i.MX51: remove NFC AXI static mapping i.MX51: determine silicon revision dynamically i.MX51: map TZIC dynamically i.MX51: Use correct clock for gpt ...
2010-04-09ARM: Fix ioremap_cached()/ioremap_wc() for SMP platformsRussell King
Write combining/cached device mappings are not setting the shared bit, which could potentially cause problems on SMP systems since the cache lines won't participate in the cache coherency protocol. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-04-09ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lockAnders Larsen
at91 slow-clock resume: Don't wait for a disabled PLL to lock. We run into this problem with the PLLB on the at91: ohci-at91 disables the PLLB when going to suspend. The slowclock code however tries to do the same: It saves the PLLB register value and when restoring the value during resume, it waits for the PLLB to lock again. However the PLL will never lock and the loop would run into its timeout because the slowclock code just stored and restored an empty register. This fixes the problem by only restoring PLLA/PLLB when they were enabled at suspend time. Cc: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-08Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
Conflicts: arch/arm/mach-mx3/mach-pcm037.c
2010-04-07ARM: 6031/1: fix Thumb-2 decompressorRabin Vincent
98e12b5a6e05413 ("ARM: Fix decompressor's kernel size estimation for ROM=y") broke the Thumb-2 decompressor because it added an entry in the LC0 table but didn't adjust the offset the Thumb-2 code uses to load the SP from that table. Fix it. Cc: stable <stable@kernel.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07ARM: 6029/1: ep93xx: gpio.c: local functions should be staticHartley Sweeten
The functions ep93xx_gpio_update_int_params and ep93xx_gpio_int_mask are not exported and should be static. This was overlooked when moving the code from core.c. Also, change a comment to better indicate what the code is for. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07ARM: 6024/1: bcmring: fix missing down on semaphore in dma.cLeo Chen
Added missing down on the memMap->lock semaphore. Also fixed a return statement so that we always exit with an up (i.e. early exit via return is not allowed) Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07Merge branch 'davinci-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> davinci: DM365: fix duplicate default IRQ priorities davinci: edma: clear events in edma_start() davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined davinci: timers: don't enable timer until clocksource is initialized
2010-04-07davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>Sergei Shtylyov
This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: DM365: fix duplicate default IRQ prioritiesKevin Hilman
IRQ 29 has two possible interrupts DDRINT and RTC, but having both in the default priority table is confusing (and triggers a warning from sparse.) This patch removes the lower priority DDRINT from the default priority table leaving the RTC setting as the default. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: edma: clear events in edma_start()Brian Niebuhr
This patch fixes an issue where a DMA channel can erroneously process an event generated by a previous transfer. A failure case is where DMA is being used for SPI transmit and receive channels on OMAP L138. In this case there is a single bit that controls all event generation from the SPI peripheral. Therefore it is possible that between when edma_stop() has been called for the transmit channel on a previous transfer and edma_start() is called for the transmit channel on a subsequent transfer, that a transmit event has been generated. The fix is to clear events in edma_start(). This prevents false events from being processed when events are enabled for that channel. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefinedSekhar Nori
The da8xx/omap-l1 boards refuse to build when CONFIG_DAVINCI_MUX is undefined because arch/arm/mach-davinci/mux.c:da8xx_pinmux_setup() is not defined. This patch fixes this issue. This is build tested with davinci_all_defconfig and da8xx_omapl_defconfig and boot tested on DA830 EVM. Reported-by: Shanmuga Sundaram Mahendran <shanmuga@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: timers: don't enable timer until clocksource is initializedKevin Hilman
On da830, when the same timer is used for clocksource and clockevent, the timer can be started before the clockevent is registered/initialzed. This creates a window where a timer interrupt might fire before the clockevent handler has been setup and causes a crash. This patch moves the actual enable/start of the timer after the clockevent has ben registered. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05Merge branch 'master' into export-slabhTejun Heo
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30MXC: mach_armadillo5x0: Add USB Host support.Alberto Panizzo
This add USB Host capability. The Armadillo 500 board is supplied with two USB Host connectors driven by the USB OTG and USB Host 2 ports, through two NXP isp 1504 transceivers. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30ARM mach-mx3: duplicated includeAndrea Gelmini
arch/arm/mach-mx3/mx31lite-db.c: linux/platform_device.h is included more than once. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30ARM mach-mx3: duplicated includeAndrea Gelmini
arch/arm/mach-mx3/mach-pcm037.c: linux/fsl_devices.h is included more than once. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30imx31: add watchdog device on litekit board.Vladimir Zapolskiy
This patch adds support for SoC build-in watchdog device on litekit board. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30imx3: Add watchdog platform device supportVladimir Zapolskiy
This patch adds support for build-in watchdog device found on Freescale imx31 and imx35 SoCs. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-29ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel buildsCatalin Marinas
When compiling the kernel to Thumb-2, using a 16-bit NOP in the memmove() implementation causes the preceding ADD PC instruction to branch incorrectly in the middle of a 32-bit LDR or STR instruction. The memmove() code is now similar to the memcpy() template. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29ARM: 6005/1: arm: kprobes: fix register corruption with jprobesMika Westerberg
Current implementation of jprobes allocates empty pt_regs from the stack which is then passed to kprobe_handler() and eventually to singlestep(). Now when instruction being simulated is STMFD (like in normal function prologues without CONFIG_FRAME_POINTER), stores using SP actually write over top of the fabricated pt_regs structure. This can be reproduced for example by using LKDTM module: # modprobe lkdtm # mount -t debugfs none /sys/kernel/debug # echo PANIC > /sys/kernel/debug/provoke-crash/INT_HW_IRQ_EN after this, it fails with corrupted registers (before the requested crash would occur): lkdtm: Crash point INT_HW_IRQ_EN of type PANIC hit, trigger in 9 rounds lkdtm: Crash point INT_HW_IRQ_EN of type PANIC hit, trigger in 8 rounds Internal error: Oops - undefined instruction: 0 [#1] last sysfs file: /sys/devices/platform/serial8250.0/sleep_timeout Modules linked in: lkdtm CPU: 0 Not tainted (2.6.34-rc2 #69) PC is at irq_desc+0x1638/0xeeb0 LR is at 0x25 pc : [<c050b428>] lr : [<00000025>] psr: c80a0013 sp : ce94bd60 ip : c050b3e8 fp : a0000013 r10: c0aa453c r9 : cf5d4000 r8 : ce9a1822 r7 : c050b424 r6 : 00000025 r5 : c039d8f8 r4 : c050b3e8 r3 : 00000001 r2 : cf4d0440 r1 : c039d8f8 r0 : 00000020 Flags: NZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8e804019 DAC: 00000015 Process sh (pid: 496, stack limit = 0xce94a2e8) Stack: (0xce94bd60 to 0xce94c000) [...] Code: 000002cd 00000000 00000000 00000001 (dead4ead) ---[ end trace 2b46d5f2b682f370 ]--- Kernel panic - not syncing: Fatal exception in interrupt This patch allocates enough space (2 * sizeof(struct pt_regs)) from the stack to prevent such corruption. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29ARM: 6001/1: removing compilation warning comming from clkdev.hviresh kumar
clkdev.h is using struct device *. Due to this compilation warning is comming. Removing this warning. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29ARM: 6000/1: removing compilation warning comming from <asm/irq.h>viresh kumar
irq.h is using struct pt_regs *. Due to this compilation warning is comming. Removing this warning by adding declaration of struct pt_regs. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-28ARM: 5997/1: ARM: Correct the VFPv3 detectionCatalin Marinas
A CPU has VFPv3 hardware if the FPSID[19:16] bits are 2 or more. Currently Linux was only checking for 3 or more. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)Catalin Marinas
The mandatory barriers (mb, rmb, wmb) are used even on uniprocessor systems for things like ordering Normal Non-cacheable memory accesses with DMA transfer (via Device memory writes). The current implementation uses dmb() for mb() and friends but this is not sufficient. The DMB only ensures the relative ordering of the observability of accesses by other processors or devices acting as masters. In case of DMA transfers started by writes to device memory, the relative ordering is not ensured because accesses to slave ports of a device are not considered observable by the DMB definition. A DSB is required for the data to reach the main memory (even if mapped as Normal Non-cacheable) before the device receives the notification to begin the transfer. Furthermore, some L2 cache controllers (like L2x0 or PL310) buffer stores to Normal Non-cacheable memory and this would need to be drained with the outer_sync() function call. The patch also allows platforms to define their own mandatory barriers implementation by selecting CONFIG_ARCH_HAS_BARRIERS and providing a mach/barriers.h file. Note that the SMP barriers are unchanged (being DMBs as before) since they are only guaranteed to work with Normal Cacheable memory. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)Catalin Marinas
The L2x0 cache controllers need to explicitly drain their write buffer even for Normal Noncacheable memory accesses. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)Catalin Marinas
This patch introduces the outer_cache_fns.sync function pointer together with the OUTER_CACHE_SYNC config option that can be used to drain the write buffer of the outer cache. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)Catalin Marinas
To avoid #include collisions with subsequent patches in the series, this patch moves the outer_cache definitions to a separate asm/outercache.h file. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25Merge branch 'mx51' into mxc-rcSascha Hauer
2010-03-25MXC: mach-mx31_3ds: add support for freescale mc13783 power management device.Alberto Panizzo
Power Gates must to be always enabled. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25MXC: mach-mx31_3ds: Add SPI1 device support.Alberto Panizzo
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25MXC: mach-mx31_3ds: Add support for on board NAND Flash.Alberto Panizzo
Since the using of Bad Block Table is not constantly a good behave I had made it configurable. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25MXC: mach-mx31_3ds: Update variable names over recent mach name modification.Alberto Panizzo
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25imx31: fix parent clock for rtcVladimir Zapolskiy
According to imx31 reference manual the signal from external low frequency clock is sent to RTC clock. The patch makes redundant the previously defined mxc_rtc clock. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-23[ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTONChristian Lamparter
"Input: add KEY_WPS_BUTTON definition" introduced a generic keycode for WPS input events. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-23[ARM] Kirkwood: WPS button keycode mappingChristian Lamparter
Commit "Input: add KEY_WPS_BUTTON definition" added a generic keycode for WPS button. Let's use it, instead of "F1" mapping. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-23Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-03-22[ARM] pxa/raumfeld: fix button nameDaniel Mack
This fixes a warning when booting 2.6.34-rc2: [ 26.619814] ------------[ cut here ]------------ [ 26.624604] WARNING: at fs/proc/generic.c:316 __xlate_proc_name+0xac/0xc0() [ 26.631555] name 'on/off button' [ 26.634753] Modules linked in: Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] pxa/raumfeld: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/arm/mach-pxa/raumfeld.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] locomo: fix unpaired spin_lock_irqsaveH Hartley Sweeten
The function locomo_m62332_senddata sends a three byte i2c message to a M62332 DAC. This entire function is guarded with a spin_lock_irqsave at the start of the function and a spin_unlock_irqrestore at the end. As each byte is transferred, the i2c ACK from the DAC is checked. Currently, if the ACK is missing the function simply returns without the unlock. It also leaves the i2c bus in an invalid state since the last byte transferred did not have a "stop" condition and leave the bus idle. Fix this by adding an exit path using goto. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] locomo: fix SPI register offsetH Hartley Sweeten
The locomo spi registers are all defined in locomo.h as offsets from the first spi register LOCOMO_SPI (0x60), which is itself an offset from the locomo base address. To correctly access these registers LOCOMO_SPI must always be included in the address calculation. There are two places in locomo.c where this is not done. The first one, in locomo_suspend, actually results in a write to LOCOMO_ST instead of LOCOMO_SPICT. The second is in __locomo_probe and results in a write to LOCOMO_MCSX2 instead of LOCOMO_SPIIE. Fix these by including LOCOMO_SPI in the calculation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pmEric Miao
sharpsl_pm.c actually depends on max1111 driver being built-in when not using legacy ssp code. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] pxa: remove unnecessary 'select FB_W100' from some platformsEric Miao
Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] pxa: remove spi cs gpio direction to avoid clash with driverJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] mmp: fix for variables in uncompress.h being discardedEric Miao
Due to commit: 5de813b ARM: Eliminate decompressor -Dstatic= PIC hack The data section will be discarded for the decompressor, thus move the static variables into BSS section by initializing them at run time. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22[ARM] pxa: fix for variables in uncompress.h being discardedJonathan Cameron
Due to commit: 5de813b ARM: Eliminate decompressor -Dstatic= PIC hack The data section will be discarded for the decompressor, thus move the static variables into BSS section by initializing them at run time. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-20ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-20ARM: Fix IXP23xx build error in mach/memory.hRussell King
One to many close parens. In file included from arch/arm/include/asm/page.h:202, from include/linux/mm_types.h:15, from include/linux/sched.h:63, from arch/arm/kernel/asm-offsets.c:13: arch/arm/include/asm/memory.h: In function 'virt_to_bus': arch/arm/include/asm/memory.h:214: error: expected ';' before ')' token arch/arm/include/asm/memory.h:214: error: expected statement before ')' token arch/arm/include/asm/memory.h: In function 'bus_to_virt': arch/arm/include/asm/memory.h:219: error: expected ';' before ')' token arch/arm/include/asm/memory.h:219: error: expected statement before ')' token Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19i.MX51: remove NFC AXI static mappingSascha Hauer
This area contains the Nand Flash controller registers. There is no need to map them statically as the Nand driver uses ioremap(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>