summaryrefslogtreecommitdiff
path: root/arch/avr32/configs
AgeCommit message (Collapse)Author
2013-05-04Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
2013-04-10cpufreq: AVR32: move cpufreq driver to drivers/cpufreqViresh Kumar
This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-22mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unloadJohan Hovold
Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-08arch: Change defconfigs to point to g_mass_storage.Michal Nazarewicz
The File-backed Storage Gadget (g_file_storage) is being removed, since it has been replaced by Mass Storage Gadget (g_mass_storage). This commit changes defconfigs point to the new gadget. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> (AT91) Acked-by: Tony Lindgren <tony@atomide.com> (OMAP1) Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> (AVR32) Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-16rtc: fix build warnings in defconfigsWanlong Gao
RTC_CLASS is changed to bool, so 'm' is invalid. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-14avr32: set CONFIG_CC_OPTIMIZE_FOR_SIZE=y for all defconfigsHans-Christian Egtvedt
This patch makes sure the kconfig option CC_OPTIMIZE_FOR_SIZE is set to yes for all default configuration files. This ensures the kernel is optimized for size, and avoids potential relocation truncated to fit problems. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-01-13avr32: update default configuration files for Atmel boardsHans-Christian Egtvedt
This patch adjusts some values to make the default configuration for Atmel boards more similar, and adds missing values to enable required functions. Also remove defined symbols for functions not in use. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-01-13avr32: disable kprobes for all default configurationsHans-Christian Egtvedt
This patch will disable kprobes for all the default AVR32 board configurations. This works around a regression in kprobes which seems to be related to AVR32 is now lacking the struct kprobe_ctlblk. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2010-08-14defconfig reductionSam Ravnborg
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-12-14avr32: update default configurations for ATNGW100, ATSTK1002 and ATSTK1006Hans-Christian Egtvedt
This patch updates the default configuration for ATNGW100 (also for the EVKLCD10X configs), ATSTK1002 and ATSTK1006. By default all kernels will now have support for EXT2/3/4 out of the box, this is handy if the user wants to boot from SD-Card. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-12-14avr32: add default configurations for ATNGW100 mkII and EVKLCD10XHans-Christian Egtvedt
This patch adds three default configurations for ATNGW100 mkII and ATNGW100 mkII with either EVKLCD100 or EVKLCD101 addon board. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-08avr32: Add support for Mediama RMTx add-on board for ATNGW100Peter Ma
Signed-off-by: Peter Ma <pma@mediamatech.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-30Add RTC support for Merisc boardsJonas Larsson
This patch adds RTC support for the Merisc boards. Signed-off-by: Jonas Larsson <jonas.larsson@martinsson.se> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-27Merge branch 'master' of ↵Haavard Skinnemoen
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into avr32-arch
2009-03-27Add Merisc board supportJonas Larsson
Merisc is the family name for a range of AVR32-based boards. The boards are designed to be used in a man-machine interfacing environment, utilizing a touch-based graphical user interface. They host a vast range of I/O peripherals as well as a large SDRAM & Flash memory bank. For more information see: http://www.martinsson.se/merisc Signed-off-by: Jonas Larsson <jonas.larsson@martinsson.se> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-26eeprom: More consistent symbol namesJean Delvare
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-07Merge branches 'fixes', 'cleanups' and 'boards'Haavard Skinnemoen
2009-01-06avr32: Remove DMATEST from defconfigsBen Nizette
In the defconfigs for ATNGW100 and ATSTK100[236] the DMA Test driver is compiled as a module. This means systems built with *_defconfig + CONFIG_MODULES=n are unusable as the 3 dma test channels monopolise the CPU. I 'spose Haavard uses this module a lot but IMO it isn't really something needed on all eval boards by default. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05avr32: Hammerhead board supportAlex Raimondi
The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. This patch does include the basic support for the fpga device driver, but not the device driver itself. Signed-off-by: Alex Raimondi <mailinglist@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-12-18ATSTK1006: Fix boot from NAND flashHaavard Skinnemoen
Enable JFFS2 write buffer support so that the kernel can access a root filesystem in NAND flash. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-14avr32: Add defconfig for the favr-32 boardHaavard Skinnemoen
Taken from buildroot. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13avr32: Add defconfig for the mimc200 boardHaavard Skinnemoen
Provided by Mark Jackson. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13avr32: Add support for EVKLCD10X addon boardsHans-Christian Egtvedt
This patch lets the user enable support for EVKLCD100 and EVKLCD101 (refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD controller and AC97 controller platform devices are added. The user can also choose between the EVKLCD100 (QVGA display) and the EVKLCD101 (VGA display), this is added to automagically select the correct panel timing and resolution parameters. Enabling support for EVKLCD10X addon board will cripple the MCI platform device a bit since they share two GPIO lines (detect and write-protect). These two lines are disabled when EVKLCD10X is enabled. The default configurations are based upon ATNGW100, but with added AC97C and LCDC driver. Virtual terminal is also enabled by default for EVKLCD10X boards. Verified on hardware with a NGW100 + EVKLCD100/101. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08avr32: Update defconfigsHaavard Skinnemoen
Enable power management, DMA and MMC on all boards except ATSTK1004, and add defconfig for the new ATSTK1006 board with NAND flash, UBI and UBIFS enabled as well. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26avr32: Update defconfigsHaavard Skinnemoen
Just provide reasonable defaults for the new stuff. Tickless and hrtimers are turned on for all boards except ATSTK1004. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-01-25[AVR32] ATNGW100: Update defconfigHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] ATSTK1002: Update defconfigHaavard Skinnemoen
Turn off a few useless options, enable a few useful ones and enable quite a few new drivers. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Add support for ATSTK1003 and ATSTK1004Haavard Skinnemoen
ATSTK1003 and ATSTK1004 are CPU daughterboards for ATSTK1000 featuring the AT32AP7001 and AT32AP7002 CPUs, respectively. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Add support for AT32AP7001 and AT32AP7002Haavard Skinnemoen
These are derivatives of the AT32AP7000 chip, which means that most of the code stays the same. Rename a few files, functions, definitions and config symbols to reflect that they apply to all AP700x chips, and exclude some platform devices from chips where they aren't present. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-07-16leds: leds-gpio for ngw100David Brownell
Add GPIO leds to the NGW100 platform and its defconfig. Access through /sys/class/leds/{a,b,sys}/* files; one defaults to a heartbeat. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-06-23[AVR32] Update defconfigsHaavard Skinnemoen
Update defconfigs for ATNGW100 and ATSTK1002. This will enable the SLUB allocator by default on both, and will enable NFS root on ATSTK1002 (ATNGW100 had it enabled before.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-27[AVR32] Board code for ATNGW100Haavard Skinnemoen
Add board code and defconfig for the ATNGW100 Network Gateway kit. For more information about this board, see http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-01-26[AVR32] Update ATSTK1000 defconfig: Enable macb by defaultHaavard Skinnemoen
Enable the Atmel MACB ethernet driver by default on ATSTK1000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-26[PATCH] AVR32: Update defconfigHaavard Skinnemoen
Sync atstk1002_defconfig with latest git, turn off non-existent drivers and enable a few more userspace-visible options like SysV IPC and inotify support. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] at91_serial -> atmel_serial: Kconfig symbolsHaavard Skinnemoen
Rename the following Kconfig symbols: * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] avr32 architectureHaavard Skinnemoen
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000 CPU and the AT32STK1000 development board. AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applications, with particular emphasis on low power consumption and high code density. The AVR32 architecture is not binary compatible with earlier 8-bit AVR architectures. The AVR32 architecture, including the instruction set, is described by the AVR32 Architecture Manual, available from http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It features a 7-stage pipeline, 16KB instruction and data caches and a full Memory Management Unit. It also comes with a large set of integrated peripherals, many of which are shared with the AT91 ARM-based controllers from Atmel. Full data sheet is available from http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf while the CPU core implementation including caches and MMU is documented by the AVR32 AP Technical Reference, available from http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf Information about the AT32STK1000 development board can be found at http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918 including a BSP CD image with an earlier version of this patch, development tools (binaries and source/patches) and a root filesystem image suitable for booting from SD card. Alternatively, there's a preliminary "getting started" guide available at http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links to the sources and patches you will need in order to set up a cross-compiling environment for avr32-linux. This patch, as well as the other patches included with the BSP and the toolchain patches, is actively supported by Atmel Corporation. [dmccr@us.ibm.com: Fix more pxx_page macro locations] [bunk@stusta.de: fix `make defconfig'] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave McCracken <dmccr@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>