summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf518
AgeCommit message (Collapse)Author
2009-12-15Blackfin: unify DMA masksMike Frysinger
Every Blackfin variant has the same DMA bit masks, so avoid duplicating them over and over in each mach header. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: unify duplicated power masksMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: punt OTP MMRsMike Frysinger
People should not be accessing OTP MMRs directly. They should instead go through the Blackfin ROM helper functions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: BF51x: dump non-existent SPI/NFC MMRsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: scrub unused watchdog mmr masksMike Frysinger
The watchdog code doesn't need these, and the other parts had these punted, so keep the global namespace clean. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: scrub unused RTC masksMike Frysinger
The RTC driver code doesn't need these, and the other parts had these punted, so keep the global namespace clean. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()Mike Frysinger
All the arches define a helper macro to make things easy for driver code. Reported-by: Frank Van Hooft <frank@frankvh.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-25Blackfin: update anomaly listsMike Frysinger
Add some recently documented anomalies (473, 474, 475, 477). Also stick a "do not edit" notice in here so people know these are copies of some master version. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop all simple-gpio board resourcesMike Frysinger
The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: BF51x: add PTP MMR definesBarry Song
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: drop board resources for dead devices (pbx/ad9960)Mike Frysinger
These hardware devices are dead and the drivers never cleaned up/merged, so punt the useless board resource info. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: update anomaly listsYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: drop unused MMR defines that only cause bad code to be writtenMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-17Blackfin: rename PCF8574 driver configMichael Hennerich
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the defines in the board resources accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix incomplete renaming of the bfin-twi-lcd driverMichael Hennerich
The sed used to rename the bfin-twi-lcd only replaced the first instance rather than all which led to the resources not being enabled when the driver was built as a module. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix wrong CTS inversionSonic Zhang
The Blackfin serial headers were inverting the CTS value leading to wrong handling of the CTS line which broke CTS/RTS handling completely. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: update anomaly lists to match latest sheets/usageGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-23Blackfin: unify memory map headersMike Frysinger
Many aspects of the Blackfin memory map is exactly the same across all variants. Rather than copy and paste all of these duplicated values in each header, unify all of these into the common Blackfin memory map header file. In the process, push down BF561 SMP specific stuff to the BF561 specific header to keep the noise down. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-23Blackfin: update anomaly listsMike Frysinger
Update anomaly headers to match latest released anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-23Blackfin: bf518f-ezbrd: update DSA resourcesMike Frysinger
The common DSA code changed structure layout, so update the BF518F-EZBRD resources accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: bf518f-ezbrd: fix SPI CS for SPI flashGraf Yang
The SPI flash on the BF518F-EZBRD board is actually hooked up to CS2, not CS1, so make sure the resources are correct. URL: http://blackfin.uclinux.org/gf/tracker/5220 Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: rename some Blackfin driversMike Frysinger
Try to keep the naming conventions consistent, so: SPI_ADC_BF533 -> BFIN_SPI_ADC TWI_LCD -> BFIN_TWI_LCD Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add support for gptimer0 as a tick sourceGraf Yang
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: BF518F-EZBRD: handle required portmuxing of async pinsGraf Yang
The two high address lines on the BF51x are not dedicated which means we need to handle them like any other peripheral pin if we want to access the upper 2MB of parallel flash. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: pull updated anomaly lists from toolchainMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28Blackfin arch: add RSI's definitions to bf514 and bf516Cliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-28Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}xMike Frysinger
convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x as the defines are redundant in these cases Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: SPI_MMC is now mainlined MMC_SPIMichael Hennerich
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: add stubs for anomalies 447 and 448Mike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabledGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04Blackfin arch: update anomaly sheets to match latest public infoMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix bug - Error if one serial has hardware flow control and ↵Tom Parker
the other doesn't I have a system where UART0 is configured with hardware flow control, but UART1 doesn't have it enabled. Attempting to access UART1 in this configuration results in the following error in dmesg: <3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart ! <5>Stack from 0082bc7c: <5> 0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4 00000000 <5> 00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249 00003035 <5> 00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748 0000ffff <5> 22222222 22222222 004e1628 00427304 00000000 00000032 00000023 0054b748 <5> 00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748 00000001 <5> 0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134 0054b748 <5> <5>Call Trace: <4>[<00485c16>] _uart_startup+0x56/0x178 <4>[<004865c8>] _uart_open+0x40/0x3e0 <4>[<0048661c>] _uart_open+0x94/0x3e0 <4>[<0047f1ce>] _init_dev+0x1fa/0x450 <4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8 <4>[<004815da>] _tty_open+0xf6/0x21c <4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c <4>[<004375e4>] _chrdev_open+0x7c/0x134 <4>[<0043dc2c>] _open_namei+0x60/0x568 <4>[<00433fa2>] ___dentry_open+0x9e/0x188 <4>[<00437568>] _chrdev_open+0x0/0x134 <4>[<0043410c>] _nameidata_to_filp+0x30/0x3c <4>[<00434152>] _do_filp_open+0x3a/0x44 <4>[<00408826>] _task_running_tick+0x102/0x278 <4>[<0043418e>] _do_sys_open+0x32/0xac <4>[<0043ede4>] _sys_ioctl+0x28/0x50 <4>[<0043edbc>] _sys_ioctl+0x0/0x50 <4>[<00434224>] _sys_open+0x18/0x20 <4>[<0043420c>] _sys_open+0x0/0x20 <4>[<00418174>] _sys_setuid+0x0/0xc8 This is because the #ifdef's in bfin_serial_5xx.h are messed up. More specifically, they add/remove the uart_{rts,cts}_pin fields in bfin_serial_resources based on whether the particular port has rts/cts enabled, as opposed to when either port has it enabled. This patch fixed this. Signed-off-by: Tom Parker <blackfin@tevp.net> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03Blackfin arch: fix compile failure when missing the anomaly definitionMike Frysinger
make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver ↵Graf Yang
platform resources to board files Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefsMike Frysinger
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add SDIO host driver platform dataCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add sdh support for bf518f-ezbrdCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Make bfin_mac built for bf51xSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: update anomaly headers to match latest sheetsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Remove wasted SIR header filesGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: cleanup - use scm for changelog, not file headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match ↵Mike Frysinger
everyone else Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v0.10.2 at 2024-08-06 17:20:19 (GMT)