| Age | Commit message (Collapse) | Author |
|---|
|
commit 033cffeedbd11c140952b98e8639bf652091a17d upstream.
Loongson-3A R2 and newer CPU have FTLB, but Config0.MT is 1, so add
MIPS_CPU_FTLB to the CPU options.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On current P-series cores from Imagination the FTLB can be enabled or
disabled via a bit in the Config6 register, and an execution hazard is
created by changing the value of bit. The ftlb_disable function already
cleared that hazard but that does no good for other callers. Clear the
hazard in the set_ftlb_enable function that creates it, and only for the
cores where it applies.
This has the effect of reverting c982c6d6c48b ("MIPS: cpu-probe: Remove
cp0 hazard barrier when enabling the FTLB") which was incorrect.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14023/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
On some cores (proAptiv, P5600) we make use of the sizes of the TLBs
to determine the desired FTLB:VTLB write ratio. However set_ftlb_enable
& thus calculate_ftlb_probability is called before decode_config4. This
results in us calculating a probability based on zero sizes, and we end
up setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio in all cases. This
will make abysmal use of the available FTLB resources in the affected
cores.
Fix this by configuring the FTLB probability after having decoded
config4. However we do need to have enabled the FTLB before that point
such that fields in config4 actually reflect that an FTLB is present. So
set_ftlb_enable is now called twice, with flags indicating that it
should configure the write probability only the second time.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: cf0a8aa0226d ("MIPS: cpu-probe: Set the FTLB probability bit on supported cores")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14022/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The FTLBP field in Config7 for the I6400 is intended as chicken bits for
debugging rather than as a field that software actually makes use of.
For best performance, FTLBP should be left at its default value of 0
with all TLB writes hitting the FTLB by default.
Additionally, since set_ftlb_enable is called from decode_configs before
decode_config4 which determines the size of the TLBs, this was
previously always setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio which
makes abysmal use of the available FTLB resources.
This effectively reverts b0c4e1b79d8a ("MIPS: Set up FTLB probability
for I6400").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14021/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH")
wasn't fully applied, possibly due to a conflict with commit
f270d881fa55 ("MIPS: Detect MIPSr6 Virtual Processor support"). This
left decode_config5() referring to the non-existent MIPS_CPU_XPA, which
breaks the build when XPA is enabled:
arch/mips/kernel/cpu-probe.c In function ‘decode_config5’:
arch/mips/kernel/cpu-probe.c:838:17: error: ‘MIPS_CPU_XPA’ undeclared (first use in this function)
c->options |= MIPS_CPU_XPA;
^
Apply the missing hunk, dropping the CONFIG_XPA ifdef and setting the
MIPS_CPU_MVH option when Config5.MVH is set.
Fixes: 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Link: https://patchwork.linux-mips.org/patch/13112/
Patchwork: https://patchwork.linux-mips.org/patch/13277/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add a few new cpu-features.h definitions for VZ sub-features, namely the
existence of the CP0_GuestCtl0Ext, CP0_GuestCtl1, and CP0_GuestCtl2
registers, and support for GuestID to dialias TLB entries belonging to
different guests.
Also add certain features present in the guest, with the naming scheme
cpu_guest_has_*. These are added separately to the main options bitfield
since they generally parallel similar features in the root context. A
few of these (FPU, MSA, watchpoints, perf counters, CP0_[X]ContextConfig
registers, MAAR registers, and probably others in future) can be
dynamically configured in the guest context, for which the
cpu_guest_has_dyn_* macros are added.
[ralf@linux-mips.org: Resolve merge conflict.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13231/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The decode_config4() function reads kscratch_mask from
CP0_Config4.KScrExist using a hard coded shift and mask. We already have
a definition for the mask in mipsregs.h, so add a definition for the
shift and make use of them.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13227/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add CPU feature for standard MIPS r2 performance counters, as determined
by the Config1.PC bit. Both perf_events and oprofile probe this bit, so
lets combine the probing and change both to use cpu_has_perf.
This will also be used for VZ support in KVM to know whether performance
counters exist which can be exposed to guests.
[ralf@linux-mips.org: resolve conflict.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Robert Richter <rric@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: oprofile-list@lists.sf.net
Patchwork: https://patchwork.linux-mips.org/patch/13226/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The CP0_[X]ContextConfig registers are present if CP0_Config3.CTXTC or
CP0_Config3.SM are set, and provide more control over which bits of
CP0_[X]Context are set to the faulting virtual address on a TLB
exception.
KVM/VZ will need to be able to save and restore these registers in the
guest context, so add the relevant definitions and probing of the
ContextConfig feature in the root context first.
[ralf@linux-mips.org: resolve merge conflict.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13225/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The optional CP0_BadInstr and CP0_BadInstrP registers are written with
the encoding of the instruction that caused a synchronous exception to
occur, and the prior branch instruction if in a delay slot.
These will be useful for instruction emulation in KVM, and especially
for VZ support where reading guest virtual memory is a bit more awkward.
Add CPU option numbers and cpu_has_* definitions to indicate the
presence of each registers, and add code to probe for them using bits in
the CP0_Config3 register.
[ralf@linux-mips.org: resolve merge conflict.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13224/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The CP0_EBase register may optionally have a write gate (WG) bit to
allow the upper bits to be written, i.e. bits 31:30 on MIPS32 since r3
(to allow for an exception base outside of KSeg0/KSeg1 when segmentation
control is in use) and bits 63:30 on MIPS64 (which also implies the
extension of CP0_EBase to 64 bits long).
The presence of this feature will need to be known about for VZ support
in order to correctly save and restore all the bits of the guest
CP0_EBase register, so add CPU feature definition and probing for this
feature.
Probing the WG bit on MIPS64 can be a bit fiddly, since 64-bit COP0
register access instructions were UNDEFINED for 32-bit registers prior
to MIPS r6, and it'd be nice to be able to probe without clobbering the
existing state, so there are 3 potential paths:
- If we do a 32-bit read of CP0_EBase and the WG bit is already set, the
register must be 64-bit.
- On MIPS r6 we can do a 64-bit read-modify-write to set CP0_EBase.WG,
since the upper bits will read 0 and be ignored on write if the
register is 32-bit.
- On pre-r6 cores, we do a 32-bit read-modify-write of CP0_EBase. This
avoids the potentially UNDEFINED behaviour, but will clobber the upper
32-bits of CP0_EBase if it isn't a simple sign extension (which also
requires us to ensure BEV=1 or modifying the exception base would be
UNDEFINED too). It is hopefully unlikely a bootloader would set up
CP0_EBase to a 64-bit segment and leave WG=0.
[ralf@linux-mips.org: Resolved merge conflict.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13223/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make BMIPS4380 and BMIPS5000 advertise support for RIXI through
cpu_probe_broadcom(). bmips_cpu_setup() needs to be called shortly after that,
during prom_init() in order to enable the proper Broadcom-specific register to
turn on RIXI and the "rotr" instruction.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: pgynther@google.com
Cc: paul.burton@imgtec.com
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12507/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some processors may not have the RIXI bit advertised in the Config3 register,
not being a MIPS32R2 or R6 core, yet, they might be supporting it through a
different way, which is overriden during vendor-specific cpu_probe().
Move the RIXI exceptions enabling after the vendor-specific cpu_probe()
function has had a change to run and override the current CPU's options with
MIPS_CPU_RIXI.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: pgynther@google.com
Cc: paul.burton@imgtec.com
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12506/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
XPA (eXtended Physical Addressing) should be detected as a combination
of two architectural features:
- Large Physical Address (as per Config3.LPA). With XPA this will be set
on MIPS32r5 cores, but it may also be set for MIPS64r2 cores too.
- MTHC0/MFHC0 instructions (as per Config5.MVH). With XPA this will be
set, but it may also be set in VZ guest context even when Config3.LPA
in the guest context has been cleared by the hypervisor.
As such, XPA is only usable if both bits are set. Update CPU features to
separate these two features, with cpu_has_xpa requiring both to be set.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13112/
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add support for extended ASIDs as determined by the Config4.AE bit.
Since the only supported CPUs known to implement this are Netlogic XLP
and MIPS I6400, select this variable ASID support based upon
CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jayachandran C. <jchandra@broadcom.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13211/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-3A R2 has pwbase/pwfield/pwsize/pwctl registers in CP0 (this
is very similar to HTW) and lwdir/lwpte/lddir/ldpte instructions which
can be used for fast TLB refill.
[ralf@linux-mips.org: Resolve conflict.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12754/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-2 has a 4 entry itlb which is a subset of jtlb, Loongson-3 has
a 4 entry itlb and a 4 entry dtlb which are subsets of jtlb. We should
write diag register to invalidate itlb/dtlb when flushing jtlb because
itlb/dtlb are not totally transparent to software.
For Loongson-3A R2 (and newer), we should invalidate ITLB, DTLB, VTLB
and FTLB before we enable/disable FTLB.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12753/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-3 CPU family:
Code-name Brand-name PRId
Loongson-3A R1 Loongson-3A1000 0x6305
Loongson-3A R2 Loongson-3A2000 0x6308
Loongson-3B R1 Loongson-3B1000 0x6306
Loongson-3B R2 Loongson-3B1500 0x6307
Features of R2 revision of Loongson-3A:
- Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache).
- I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is
64 bytes.
- 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way
set-associative).
- Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/
Execute-Inhibit.
[ralf@linux-mips.org: Resolved merge conflicts.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12751/
Patchwork: https://patchwork.linux-mips.org/patch/13136/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Just to ease debugging of multiplatform kernel, make sure we print
"Broadcom BMIPS5200" for the BMIPS5200 implementation instead of
Broadcom BMIPS5000.
Fixes: 68e6a78373a6d ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
DSPv3 is supported on all MIPSr6 systems which indicate support for DSPv2.
This doesn't require any changes to the kernel's handling of DSP
resources. The patch is to detect support and indicate it in /proc/cpuinfo
DSP v3 introduces a new instruction BPOSGE32C
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12918/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Support probing the M6250 CPU now that cases for handling it have been
added where required in the core MIPS kernel code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Support probing the P6600 core now that cases for handling it have been
added throughout the core MIPS kernel code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12344/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add cases supporting the P6600 CPU to various switch statements in
core MIPS kernel code that define behaviour dependent upon the CPU.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12343/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MIPSr6 introduces support for "Virtual Processors", which are
conceptually similar to VPEs from the now-deprecated MT ASE. Detect
whether the system supports VPs using the VP bit in Config5, adding
cpu_has_vp for use by later patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Steven J. Hill <sjhill@realitydiluted.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12327/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add new processor identifiers for Cavium CN73xx and CNF75xx
processors, and probe for them in cpu-probe.c
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12311/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add an `ieee754=' kernel parameter to control IEEE Std 754 conformance
mode.
Use separate flags copied from the respective CPU feature flags, and
adjusted according to the conformance mode selected, to make binaries
requesting individual NaN encoding modes accepted or rejected as needed.
Update the initial setting for FCSR and, in the full FPU emulation mode,
its read-only mask accordingly. Accept the mode selection requested for
legacy processors as well.
As with the EF_MIPS_NAN2008 ELF file header flag adjust both ABS2008 and
NAN2008 bits at the same time, to match the choice made for hardware
currently implemented.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11481/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Determine the presence of and the amount of control available over IEEE
Std 754-2008 features.
In the case of a hardware FPU being used examine the FIR register for
the presence of the HAS2008 bit and then the FCSR register for the
writability of the ABS2008 and NAN2008 bits and the hardwired state of
each of these bits if read-only. Update the initial FCSR contents used
for threads and the FCSR writability mask accordingly.
For full FPU emulation and MIPS32 or MIPS64 processors make the FCSR
ABS2008 and NAN2008 bits writable.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11480/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Implement IEEE Std 754-2008 NaN encoding wired to the state of the
FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data
as follows:
* in the legacy mode originally defined by the MIPS architecture the
value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN,
* in the 2008 mode introduced with revision 5 of the MIPS architecture
the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN,
following the definition of the preferred NaN encoding introduced with
IEEE Std 754-2008.
In the 2008 mode, following the requirement of the said standard, quiet
an sNaN where needed by setting the quiet bit to 1 and leaving all the
NaN payload bits unchanged.
Update format conversion operations according to the rules set by IEEE
Std 754-2008 and the MIPS architecture. Specifically:
* propagate NaN payload bits through conversions between floating-point
formats such that as much information as possible is preserved and
specifically a conversion from a narrower format to a wider format and
then back to the original format does not change a qNaN payload in any
way,
* conversions from a floating-point to an integer format where the
source is a NaN, infinity or a value that would convert to an integer
outside the range of the result format produce, under the default
exception handling, the respective values defined by the MIPS
architecture.
In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make
any further FCSR bits writable.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Allocate CPU option bits and define macros for the legacy-NaN and
2008-NaN IEEE Std 754 MIPS architecture features. Unconditionally mark
the legacy-NaN feature as present across hardware and emulated
floating-point configurations.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11475/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Extend the existing support for Hardware Table Walking (HTW) to MIPS64
systems by supporting PMDs & setting the pointer size bit in PWSize,
then ceasing to blacklist HTW on MIPS64 systems.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11224/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
R6 removed the Config4.MMUExtDef field, with the low 16 bits only
allowed to contain FTLB fields, and commit e87569cd6c57 ("MIPS:
cpu-probe: Fix VTLB/FTLB configuration for R6") updated the probing of
this field to assume an FTLB is always present for R6.
However the FTLB may still be absent. The presence of those fields is
actually specified by the MMU type in the Config.MT field, so use that
(the new cpu_has_ftlb) to determine whether the FTLB is actually
present.
Fixes: e87569cd6c57 ("MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11160/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add cpu_has_ftlb, which specifies that an FTLB is present in addition to
the VTLB, probed based on whether Config.MT == 4 (rather than 1 for
standard JTLB).
This is necessary since MIPS release 6 removes Config4.MMUExtDef, so the
presence of the FTLB fields in Config4 must be determined from Config.MT
instead.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11159/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
If MSA is supported by both the hardware & the kernel then advertise
that support to userland via the AT_HWCAP aux vector.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/10799/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When running on a CPU implementing the release 6 of the MIPS32 or MIPS64
ISA, advertise that to userland via the appropriate HWCAP bit.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/10798/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
In order for userland to determine whether various features are safe to
use, it will need to know both that the hardware supports those features
and that the kernel is recent enough & configured appropriately to
support them. For example under the O32 modeless FP proposal the dynamic
linker & ifunc resolvers will need this information. The kernel is the
only thing in a position to know availability accurately, so the kernel
needs to provide the information to userland. This patch introduces the
infrastructure to provide the AT_HWCAP aux vector to userland in order
to provide that information. It also defines the 2 currently specified
flags, which indicate MIPSr6 & MSA support.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: linux-kernel@vger.kernel.org
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/10797/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Probe Config3 for small page support. This will be useful to give clues
as to whether the PageGrain register exists.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10722/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Set up the I6400 FTLB probability similar to P5600 and proAptiv.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10652/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
R6 has dropped the MMUExtDef field from the config4 register and it
now returns 0. However, the return value means nothing in that case
and the only supported configuration for R6 is the VTLB+FTLB
(MMUextDef == 3). As a result, rework the code so that the correct
value is set for R6 cores.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10651/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add a default case for the FTLB enable/disable code. This will be used
to detect that something went wrong in the set_ftlb_enable() function
either because that function knows nothing about the running core, or
simply because the core can't turn its FTLB on/off.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10650/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We are so early in the boot process where we really don't want to
stall and wait for CP0 FTLB related changes become visible so just drop
the cp0 hazard barrier.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10649/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add a case in cpu_probe_mips for the MIPS I6400 processor ID, which sets
the CPU type to the new CPU_I6400.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10636/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The R12000 added a new feature to enhance branch prediction called
"global history". Per the Vr10000 Series User Manual (U10278EJ4V0UM),
Coprocessor 0, Diagnostic Register (22):
"""
If bit 26 is set, branch prediction uses all eight bits of the global
history register. If bit 26 is not set, then bits 25:23 specify a count
of the number of bits of global history to be used. Thus if bits 26:23
are all zero, global history is disabled.
The global history contains a record of the taken/not-taken status of
recently executed branches, and when used is XOR'ed with the PC of a
branch being predicted to produce a hashed value for indexing the BPT.
Some programs with small "working set of conditional branches" benefit
significantly from the use of such hashing, some see slight performance
degradation.
"""
This patch enables global history on R12000 CPUs and up by setting bit
26 in the branch prediction diagnostic register (CP0 $22) to '1'. Bits
25:23 are left alone so that all eight bits of the global history
register are available for branch prediction.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Ingenic have actually varied the vendor/company ID of the XBurst cores
across their range of SoCs, whilst keeping the product ID & revision
constant... Add definitions for vendor IDs known to be used in some of
Ingenic's newer SoCs, and handle them in the same way as the existing
Ingenic vendor ID from the JZ4740.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Co-authored-by: Paul Cercueil <paul@crapouillou.net>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/10128/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Use the default FCSR value in mask probing, avoiding an FPE exception
where reset has left any exception enable and their corresponding cause
bits set and the register is then rewritten with these bits active.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
|
Factor out FPU feature probing, mainly to remove code duplication from
`fpu_disable'. No functional change although shuffle some code to avoid
forward references.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9712/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Define the central place the default FCSR value is set from, initialised
in `cpu_probe'. Determine the FCSR mask applied to values written to
the register with CTC1 in the full emulation mode and via ptrace(2),
according to the ISA level of processor hardware or the writability of
bits 31:18 if actual FPU hardware is used.
Software may rely on FCSR bits whose functions our emulator does not
implement, so it should not allow them to be set or software may get
confused. For ptrace(2) it's just sanity.
[ralf@linux-mips.org: Fixed double inclusion of <asm/current.h>.]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9711/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Implement FIR feature flags in the FPU emulator according to features
supported and architecture level requirements. The W, L and F64 bits
have only been added at level #2 even though the features they refer to
were also included with the MIPS64r1 ISA and the W fixed-point format
also with the MIPS32r1 ISA.
This is only relevant for the full emulation mode and the emulated CFC1
instruction as well as ptrace(2) accesses.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9707/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Correct an ISA level determination problem introduced with 8b8aa636
[MIPS: kernel: cpu-probe.c: Add support for MIPS R6], reverting explicit
masking against individual `MIPS_CPU_ISA_*' macros in FPU feature
determination.
Feature macros such as `cpu_has_mips_r' cannot be used here, because
they operate on CPU #0 and we want to refer to the current CPU instead.
They cannot be used for masking against the current CPU either because
they mask against CPU #0 too, e.g.:
# define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1)
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Reword the comment for `__cpu_has_fpu' to make it unambiguous this code
is for external floating-point units only, generally MIPS I processors
using the original CP1 hardware interface.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9673/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
