summaryrefslogtreecommitdiff
path: root/arch/mips/kvm
AgeCommit message (Collapse)Author
2016-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release overall. x86: - miscellaneous fixes - AVIC support (local APIC virtualization, AMD version) s390: - polling for interrupts after a VCPU goes to halted state is now enabled for s390 - use hardware provided information about facility bits that do not need any hypervisor activity, and other fixes for cpu models and facilities - improve perf output - floating interrupt controller improvements. MIPS: - miscellaneous fixes PPC: - bugfixes only ARM: - 16K page size support - generic firmware probing layer for timer and GIC Christoffer Dall (KVM-ARM maintainer) says: "There are a few changes in this pull request touching things outside KVM, but they should all carry the necessary acks and it made the merge process much easier to do it this way." though actually the irqchip maintainers' acks didn't make it into the patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer, later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more formally and for documentation purposes')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits) KVM: MTRR: remove MSR 0x2f8 KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same svm: Manage vcpu load/unload when enable AVIC svm: Do not intercept CR8 when enable AVIC svm: Do not expose x2APIC when enable AVIC KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore svm: Add VMEXIT handlers for AVIC svm: Add interrupt injection via AVIC KVM: x86: Detect and Initialize AVIC support svm: Introduce new AVIC VMCB registers KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg KVM: x86: Misc LAPIC changes to expose helper functions KVM: shrink halt polling even more for invalid wakeups KVM: s390: set halt polling to 80 microseconds KVM: halt_polling: provide a way to qualify wakeups during poll KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts kvm: Conditionally register IRQ bypass consumer ...
2016-05-13KVM: halt_polling: provide a way to qualify wakeups during pollChristian Borntraeger
Some wakeups should not be considered a sucessful poll. For example on s390 I/O interrupts are usually floating, which means that _ALL_ CPUs would be considered runnable - letting all vCPUs poll all the time for transactional like workload, even if one vCPU would be enough. This can result in huge CPU usage for large guests. This patch lets architectures provide a way to qualify wakeups if they should be considered a good/bad wakeups in regard to polls. For s390 the implementation will fence of halt polling for anything but known good, single vCPU events. The s390 implementation for floating interrupts does a wakeup for one vCPU, but the interrupt will be delivered by whatever CPU checks first for a pending interrupt. We prefer the woken up CPU by marking the poll of this CPU as "good" poll. This code will also mark several other wakeup reasons like IPI or expired timers as "good". This will of course also mark some events as not sucessful. As KVM on z runs always as a 2nd level hypervisor, we prefer to not poll, unless we are really sure, though. This patch successfully limits the CPU usage for cases like uperf 1byte transactional ping pong workload or wakeup heavy workload like OLTP while still providing a proper speedup. This also introduced a new vcpu stat "halt_poll_no_tuning" that marks wakeups that are considered not good for polling. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Radim Krčmář <rkrcmar@redhat.com> (for an earlier version) Cc: David Matlack <dmatlack@google.com> Cc: Wanpeng Li <kernellwp@gmail.com> [Rename config symbol. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-13MIPS: Define & use CP0_EBase bit definitionsJames Hogan
Add definitions for the bits & fields in the CP0_EBase register, and use them from a few different places in arch/mips which hardcoded these values. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13222/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support extended ASIDsPaul Burton
Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Retrieve ASID masks using function accepting struct cpuinfo_mipsPaul Burton
In preparation for supporting variable ASID masks, retrieve ASID masks using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This will allow those functions to determine the ASID mask based upon the CPU in a later patch. This also allows for the r3k & r8k cases to be handled in Kconfig, which is arguably cleaner than the previous #ifdefs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM/locore.S: Relax noatJames Hogan
Now that the at register ($1) is no longer saved by __kvm_mips_vcpu_run(), relax the noat assembler directive so that it only applies around code where at is restored before entering guest, and saved after exiting guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13209/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM/locore.S: Only preserve callee saved registersJames Hogan
Update __kvm_mips_vcpu_run() to only save and restore callee saved registers. It is always called using the standard ABIs, so the caller will preserve any other registers that need preserving. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13208/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM: Abstract guest ASID maskPaul Burton
In preparation for supporting varied widths of ASID mask in the kernel in general, switch KVM's guest ASIDs to a new KVM_ENTRYHI_ASID definition based on the 8-bit MIPS_ENTRYHI_ASID instead of ASID_MASK. It could potentially be used to support extended guest ASIDs in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add & use CP0_EntryHi ASID definitionsJames Hogan
Add definitions for the ASID field in CP0_EntryHi (along with the soon to be used ASIDX field), and use them in a few previously hardcoded cases. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KVM/locore.S: Don't preserve host ASID around vcpu_runJames Hogan
MIPS KVM uses different ASIDs for guest execution than for the host. The host ASID is saved on the stack when entering the guest with __kvm_mips_vcpu_run(), and restored again before returning back to the caller (exit to userland). - This does not take into account that pre-emption may have taken place during that time, which may have started a new ASID cycle and resulted in that process' ASID being invalidated and reused. - This does not take into account that the process may have migrated to a different CPU during that time, with a different ASID assignment since they are managed per-CPU. - It is actually redundant, since the host ASID will be restored correctly by kvm_arch_vcpu_put(), which is called almost immediately after kvm_arch_vcpu_ioctl_run() returns. Therefore drop this code from locore.S Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13206/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-10MIPS: KVM: Add missing disable FPU hazard barriersJames Hogan
Add the necessary hazard barriers after disabling the FPU in kvm_lose_fpu(), just to be safe. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-10MIPS: KVM: Fix preemption warning reading FPU capabilityJames Hogan
Reading the KVM_CAP_MIPS_FPU capability returns cpu_has_fpu, however this uses smp_processor_id() to read the current CPU capabilities (since some old MIPS systems could have FPUs present on only a subset of CPUs). We don't support any such systems, so work around the warning by using raw_cpu_has_fpu instead. We should probably instead claim not to support FPU at all if any one CPU is lacking an FPU, but this should do for now. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-10MIPS: KVM: Fix preemptable kvm_mips_get_*_asid() callsJames Hogan
There are a couple of places in KVM fault handling code which implicitly use smp_processor_id() via kvm_mips_get_kernel_asid() and kvm_mips_get_user_asid() from preemptable context. This is unsafe as a preemption could cause the guest kernel ASID to be changed, resulting in a host TLB entry being written with the wrong ASID. Fix by disabling preemption around the kvm_mips_get_*_asid() call and the corresponding kvm_mips_host_tlb_write(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-10MIPS: KVM: Fix timer IRQ race when writing CP0_CompareJames Hogan
Writing CP0_Compare clears the timer interrupt pending bit (CP0_Cause.TI), but this wasn't being done atomically. If a timer interrupt raced with the write of the guest CP0_Compare, the timer interrupt could end up being pending even though the new CP0_Compare is nowhere near CP0_Count. We were already updating the hrtimer expiry with kvm_mips_update_hrtimer(), which used both kvm_mips_freeze_hrtimer() and kvm_mips_resume_hrtimer(). Close the race window by expanding out kvm_mips_update_hrtimer(), and clearing CP0_Cause.TI and setting CP0_Compare between the freeze and resume. Since the pending timer interrupt should not be cleared when CP0_Compare is written via the KVM user API, an ack argument is added to distinguish the source of the write. Fixes: e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.16.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-10MIPS: KVM: Fix timer IRQ race when freezing timerJames Hogan
There's a particularly narrow and subtle race condition when the software emulated guest timer is frozen which can allow a guest timer interrupt to be missed. This happens due to the hrtimer expiry being inexact, so very occasionally the freeze time will be after the moment when the emulated CP0_Count transitions to the same value as CP0_Compare (so an IRQ should be generated), but before the moment when the hrtimer is due to expire (so no IRQ is generated). The IRQ won't be generated when the timer is resumed either, since the resume CP0_Count will already match CP0_Compare. With VZ guests in particular this is far more likely to happen, since the soft timer may be frozen frequently in order to restore the timer state to the hardware guest timer. This happens after 5-10 hours of guest soak testing, resulting in an overflow in guest kernel timekeeping calculations, hanging the guest. A more focussed test case to intentionally hit the race (with the help of a new hypcall to cause the timer state to migrated between hardware & software) hits the condition fairly reliably within around 30 seconds. Instead of relying purely on the inexact hrtimer expiry to determine whether an IRQ should be generated, read the guest CP0_Compare and directly check whether the freeze time is before or after it. Only if CP0_Count is on or after CP0_Compare do we check the hrtimer expiry to determine whether the last IRQ has already been generated (which will have pushed back the expiry by one timer period). Fixes: e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.16.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-03MIPS: Fix misspellings in comments.Adam Buchbinder
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-15Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Make schedstats a runtime tunable (disabled by default) and optimize it via static keys. As most distributions enable CONFIG_SCHEDSTATS=y due to its instrumentation value, this is a nice performance enhancement. (Mel Gorman) - Implement 'simple waitqueues' (swait): these are just pure waitqueues without any of the more complex features of full-blown waitqueues (callbacks, wake flags, wake keys, etc.). Simple waitqueues have less memory overhead and are faster. Use simple waitqueues in the RCU code (in 4 different places) and for handling KVM vCPU wakeups. (Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker, Marcelo Tosatti) - sched/numa enhancements (Rik van Riel) - NOHZ performance enhancements (Rik van Riel) - Various sched/deadline enhancements (Steven Rostedt) - Various fixes (Peter Zijlstra) - ... and a number of other fixes, cleanups and smaller enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) sched/cputime: Fix steal_account_process_tick() to always return jiffies sched/deadline: Remove dl_new from struct sched_dl_entity Revert "kbuild: Add option to turn incompatible pointer check into error" sched/deadline: Remove superfluous call to switched_to_dl() sched/debug: Fix preempt_disable_ip recording for preempt_disable() sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity time, acct: Drop irq save & restore from __acct_update_integrals() acct, time: Change indentation in __acct_update_integrals() sched, time: Remove non-power-of-two divides from __acct_update_integrals() sched/rt: Kick RT bandwidth timer immediately on start up sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug sched/debug: Move sched_domain_sysctl to debug.c sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c sched/rt: Fix PI handling vs. sched_setscheduler() sched/core: Remove duplicated sched_group_set_shares() prototype sched/fair: Consolidate nohz CPU load update code sched/fair: Avoid using decay_load_missed() with a negative value sched/deadline: Always calculate end of period on sched_yield() sched/cgroup: Fix cgroup entity load tracking tear-down rcu: Use simple wait queues where possible in rcutree ...
2016-03-02mips/kvm: fix ioctl error handlingMichael S. Tsirkin
Returning directly whatever copy_to_user(...) or copy_from_user(...) returns may not do the right thing if there's a pagefault: copy_to_user/copy_from_user return the number of bytes not copied in this case, but ioctls need to return -EFAULT instead. Fix up kvm on mips to do return copy_to_user(...)) ? -EFAULT : 0; and return copy_from_user(...)) ? -EFAULT : 0; everywhere. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25KVM: Use simple waitqueue for vcpu->wqMarcelo Tosatti
The problem: On -rt, an emulated LAPIC timer instances has the following path: 1) hard interrupt 2) ksoftirqd is scheduled 3) ksoftirqd wakes up vcpu thread 4) vcpu thread is scheduled This extra context switch introduces unnecessary latency in the LAPIC path for a KVM guest. The solution: Allow waking up vcpu thread from hardirq context, thus avoiding the need for ksoftirqd to be scheduled. Normal waitqueues make use of spinlocks, which on -RT are sleepable locks. Therefore, waking up a waitqueue waiter involves locking a sleeping lock, which is not allowed from hard interrupt context. cyclictest command line: This patch reduces the average latency in my tests from 14us to 11us. Daniel writes: Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency benchmark on mainline. The test was run 1000 times on tip/sched/core 4.4.0-rc8-01134-g0905f04: ./x86-run x86/tscdeadline_latency.flat -cpu host with idle=poll. The test seems not to deliver really stable numbers though most of them are smaller. Paolo write: "Anything above ~10000 cycles means that the host went to C1 or lower---the number means more or less nothing in that case. The mean shows an improvement indeed." Before: min max mean std count 1000.000000 1000.000000 1000.000000 1000.000000 mean 5162.596000 2019270.084000 5824.491541 20681.645558 std 75.431231 622607.723969 89.575700 6492.272062 min 4466.000000 23928.000000 5537.926500 585.864966 25% 5163.000000 1613252.750000 5790.132275 16683.745433 50% 5175.000000 2281919.000000 5834.654000 23151.990026 75% 5190.000000 2382865.750000 5861.412950 24148.206168 max 5228.000000 4175158.000000 6254.827300 46481.048691 After min max mean std count 1000.000000 1000.00000 1000.000000 1000.000000 mean 5143.511000 2076886.10300 5813.312474 21207.357565 std 77.668322 610413.09583 86.541500 6331.915127 min 4427.000000 25103.00000 5529.756600 559.187707 25% 5148.000000 1691272.75000 5784.889825 17473.518244 50% 5160.000000 2308328.50000 5832.025000 23464.837068 75% 5172.000000 2393037.75000 5853.177675 24223.969976 max 5222.000000 3922458.00000 6186.720500 42520.379830 [Patch was originaly based on the swait implementation found in the -rt tree. Daniel ported it to mainline's version and gathered the benchmark numbers for tscdeadline_latency test.] Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24MIPS: KVM: Add missing newline to kvm_err()James Hogan
Add missing newline to end of kvm_err string when guest PMAP couldn't be allocated. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move KVM specific opcodes into asm/inst.hJames Hogan
The header arch/mips/kvm/opcode.h defines a few extra opcodes which aren't in arch/mips/include/uapi/asm/inst.h. There's nothing KVM specific about them, so lets move them into inst.h where they belong and delete the header. Note that mfmcz_op is renamed to mfmc0_op to match the instruction set manual, and wait_op was already added to inst.h in commit b0a3eae2b943 ("MIPS: inst.h: define COP0 wait op"), merged in v3.16-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11895/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Use cacheops.h definitionsJames Hogan
Drop the custom cache operation code definitions used by KVM for emulating guest CACHE instructions, and switch to use the existing definitions in <asm/cacheops.h>. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11893/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: Move Cause.ExcCode trap codes to mipsregs.hJames Hogan
Move the Cause.ExcCode trap code definitions from kvm_host.h to mipsregs.h, since they describe architectural bits rather than KVM specific constants, and change the prefix from T_ to EXCCODE_. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11891/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Make kvm_mips_{init,exit}() staticJames Hogan
The module init and exit functions have no need to be global, so make them static. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Refactor added offsetof()sJames Hogan
When calculating the offsets into the commpage for dynamically translated mtc0/mfc0 guest instructions, multiple offsetof()s are added together to find the offset of the specific register in the mips_coproc, within the commpage. Simplify each of these cases to a single offsetof() to find the offset of the specific register within the commpage. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11888/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Convert EXPORT_SYMBOL to _GPLJames Hogan
Export symbols only to GPL modules to match other KVM symbols in virt/kvm/ and arch/*/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11887/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Drop unused kvm_mips_host_tlb_inv_index()James Hogan
The function kvm_mips_host_tlb_inv_index() is unused, so drop it completely. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: KVM: Trivial whitespace and style fixesJames Hogan
A bunch of misc whitespace and style fixes within arch/mips/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-16kvm: rename pfn_t to kvm_pfn_tDan Williams
To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-18MIPS: KVM: Uninit VCPU in vcpu_create error pathJames Hogan
If either of the memory allocations in kvm_arch_vcpu_create() fail, the vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd in the error handling path. Add a call to kvm_vcpu_uninit() to fix this. Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-18MIPS: KVM: Fix CACHE immediate offset sign extensionJames Hogan
The immediate field of the CACHE instruction is signed, so ensure that it gets sign extended by casting it to an int16_t rather than just masking the low 16 bits. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-18MIPS: KVM: Fix ASID restoration logicJames Hogan
ASID restoration on guest resume should determine the guest execution mode based on the guest Status register rather than bit 30 of the guest PC. Fix the two places in locore.S that do this, loading the guest status from the cop0 area. Note, this assembly is specific to the trap & emulate implementation of KVM, so it doesn't need to check the supervisor bit as that mode is not implemented in the guest. Fixes: b680f70fc111 ("KVM/MIPS32: Entry point for trampolining to...") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-11MIPS: Fix duplicate CP0_* definitions.James Hogan
Remove the definition in locore.S and move a few of the other similar definitions in asm/mipsregs.h too. CP0_INTCTL, CP0_SRSCTL, & CP0_SRSMAP are unused so they're just dropped instead. CP0_DDATA_LO is left where it is as I have patches to eliminate its use in locore.S and it otherwise is unlikely to need to be used from assembly code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11461/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-16KVM: add halt_attempted_poll to VCPU statsPaolo Bonzini
This new statistic can help diagnosing VCPUs that, for any reason, trigger bad behavior of halt_poll_ns autotuning. For example, say halt_poll_ns = 480000, and wakeups are spaced exactly like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes 10+20+40+80+160+320+480 = 1110 microseconds out of every 479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then is consuming about 30% more CPU than it would use without polling. This would show as an abnormally high number of attempted polling compared to the successful polls. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com< Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull first batch of KVM updates from Paolo Bonzini: "The bulk of the changes here is for x86. And for once it's not for silicon that no one owns: these are really new features for everyone. Details: - ARM: several features are in progress but missed the 4.2 deadline. So here is just a smattering of bug fixes, plus enabling the VFIO integration. - s390: Some fixes/refactorings/optimizations, plus support for 2GB pages. - x86: * host and guest support for marking kvmclock as a stable scheduler clock. * support for write combining. * support for system management mode, needed for secure boot in guests. * a bunch of cleanups required for the above * support for virtualized performance counters on AMD * legacy PCI device assignment is deprecated and defaults to "n" in Kconfig; VFIO replaces it On top of this there are also bug fixes and eager FPU context loading for FPU-heavy guests. - Common code: Support for multiple address spaces; for now it is used only for x86 SMM but the s390 folks also have plans" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) KVM: s390: clear floating interrupt bitmap and parameters KVM: x86/vPMU: Enable PMU handling for AMD PERFCTRn and EVNTSELn MSRs KVM: x86/vPMU: Implement AMD vPMU code for KVM KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch KVM: x86/vPMU: introduce kvm_pmu_msr_idx_to_pmc KVM: x86/vPMU: reorder PMU functions KVM: x86/vPMU: whitespace and stylistic adjustments in PMU code KVM: x86/vPMU: use the new macros to go between PMC, PMU and VCPU KVM: x86/vPMU: introduce pmu.h header KVM: x86/vPMU: rename a few PMU functions KVM: MTRR: do not map huge page for non-consistent range KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type KVM: MTRR: introduce mtrr_for_each_mem_type KVM: MTRR: introduce fixed_mtrr_addr_* functions KVM: MTRR: sort variable MTRRs KVM: MTRR: introduce var_mtrr_range KVM: MTRR: introduce fixed_mtrr_segment table KVM: MTRR: improve kvm_mtrr_get_guest_memory_type KVM: MTRR: do not split 64 bits MSR content KVM: MTRR: clean up mtrr default type ...
2015-06-06MIPS: KVM: Do not sign extend on unsigned MMIO loadNicholas Mc Guire
Fix possible unintended sign extension in unsigned MMIO loads by casting to uint16_t in the case of mmio_needed != 2. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Tested-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9985/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-28KVM: add "new" argument to kvm_arch_commit_memory_regionPaolo Bonzini
This lets the function access the new memory slot without going through kvm_memslots and id_to_memslot. It will simplify the code when more than one address space will be supported. Unfortunately, the "const"ness of the new argument must be casted away in two places. Fixing KVM to accept const struct kvm_memory_slot pointers would require modifications in pretty much all architectures, and is left for later. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: const-ify uses of struct kvm_userspace_memory_regionPaolo Bonzini
Architecture-specific helpers are not supposed to muck with struct kvm_userspace_memory_region contents. Add const to enforce this. In order to eliminate the only write in __kvm_set_memory_region, the cleaning of deleted slots is pulled up from update_memslots to __kvm_set_memory_region. Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-26KVM: use kvm_memslots whenever possiblePaolo Bonzini
kvm_memslots provides lockdep checking. Use it consistently instead of explicit dereferencing of kvm->memslots. Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-19KVM: mips: use id_to_memslot correctlyPaolo Bonzini
The argument to KVM_GET_DIRTY_LOG is a memslot id; it may not match the position in the memslots array, which is sorted by gfn. Cc: stable@vger.kernel.org Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-12MIPS: KVM: Fix unused variable build warningNicholas Mc Guire
As kvm_mips_complete_mmio_load() did not yet modify PC at this point as James Hogans <james.hogan@imgtec.com> explained the curr_pc variable and the comments along with it can be dropped. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.org/lkml/2015/5/8/422 Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9993/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-07KVM: arm/mips/x86/power use __kvm_guest_{enter|exit}Christian Borntraeger
Use __kvm_guest_{enter|exit} instead of kvm_guest_{enter|exit} where interrupts are disabled. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-27MIPS: KVM: Wire up MSA capabilityJames Hogan
Now that the code is in place for KVM to support MIPS SIMD Architecutre (MSA) in MIPS guests, wire up the new KVM_CAP_MIPS_MSA capability. For backwards compatibility, the capability must be explicitly enabled in order to detect or make use of MSA from the guest. The capability is not supported if the hardware supports MSA vector partitioning, since the extra support cannot be tested yet and it extends the state that the userland program would have to save. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Expose MSA registersJames Hogan
Add KVM register numbers for the MIPS SIMD Architecture (MSA) registers, and implement access to them with the KVM_GET_ONE_REG / KVM_SET_ONE_REG ioctls when the MSA capability is enabled (exposed in a later patch) and present in the guest according to its Config3.MSAP bit. The MSA vector registers use the same register numbers as the FPU registers except with a different size (128bits). Since MSA depends on Status.FR=1, these registers are inaccessible when Status.FR=0. These registers are returned as a single native endian 128bit value, rather than least significant half first with each 64-bit half native endian as the kernel uses internally. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Add MSA exception handlingJames Hogan
Add guest exception handling for MIPS SIMD Architecture (MSA) floating point exceptions and MSA disabled exceptions. MSA floating point exceptions from the guest need passing to the guest kernel, so for these a guest MSAFPE is emulated. MSA disabled exceptions are normally handled by passing a reserved instruction exception to the guest (because no guest MSA was supported), but the hypervisor can now handle them if the guest has MSA by passing an MSA disabled exception to the guest, or if the guest has MSA enabled by transparently restoring the guest MSA context and enabling MSA and the FPU. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Emulate MSA bits in COP0 interfaceJames Hogan
Emulate MSA related parts of COP0 interface so that the guest will be able to enable/disable MSA (Config5.MSAEn) once the MSA capability has been wired up. As with the FPU (Status.CU1) setting Config5.MSAEn has no immediate effect if the MSA state isn't live, as MSA state is restored lazily on first use. Changes after the MSA state has been restored take immediate effect, so that the guest can start getting MSA disabled exceptions right away for guest MSA operations. The MSA state is saved lazily too, as MSA may get re-enabled in the near future anyway. A special case is also added for when Status.CU1 is set while FR=0 and the MSA state is live. In this case we are at risk of getting reserved instruction exceptions if we try and save the MSA state, so we lose the MSA state sooner while MSA is still usable. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Add base guest MSA supportJames Hogan
Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Wire up FPU capabilityJames Hogan
Now that the code is in place for KVM to support FPU in MIPS KVM guests, wire up the new KVM_CAP_MIPS_FPU capability. For backwards compatibility, the capability must be explicitly enabled in order to detect or make use of the FPU from the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Expose FPU registersJames Hogan
Add KVM register numbers for the MIPS FPU registers, and implement access to them with the KVM_GET_ONE_REG / KVM_SET_ONE_REG ioctls when the FPU capability is enabled (exposed in a later patch) and present in the guest according to its Config1.FP bit. The registers are accessible in the current mode of the guest, with each sized access showing what the guest would see with an equivalent access, and like the architecture they may become UNPREDICTABLE if the FR mode is changed. When FR=0, odd doubles are inaccessible as they do not exist in that mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org