| Age | Commit message (Collapse) | Author |
|---|
|
Program irq injection during program irq intercepts is the last candidates
that injects nullifying irqs and relies on delivery to do the right thing.
As we should not rely on the icptcode during any delivery (because that
value will not be migrated), let's add a flag, telling prog IRQ delivery
to not rewind the PSW in case of nullifying prog IRQs.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
__extract_prog_irq() is used only once for getting the program check data
in one place. Let's combine it with an injection function to avoid a memset
and to prevent misuse on injection by simplifying the interface to only
have the VCPU as parameter.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
We will need special handling when fetching instructions, so let's
introduce new guest access modes GACC_FETCH and GACC_STORE instead
of a write flag. An additional patch will then introduce GACC_IFETCH.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
We have some confusion about ilc vs. ilen in our current code. So let's
correctly use the term ilen when dealing with (ilc << 1).
Program irq injection didn't take care of the correct ilc in case of
irqs triggered by EXECUTE functions, let's provide one function
kvm_s390_get_ilen() to take care of all that.
Also, manually specifying in intercept handlers the size of the
instruction (and sometimes overwriting that value for EXECUTE internally)
doesn't make too much sense. So also provide the functions:
- kvm_s390_retry_instr to retry the currently intercepted instruction
- kvm_s390_rewind_psw to rewind the PSW without internal overwrites
- kvm_s390_forward_psw to forward the PSW
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Let's rewrite this function to better reflect how we actually handle
exit_code. By dropping out early we can save a few cycles. This
especially speeds up sie exits caused by host irqs.
Also, let's move the special -EOPNOTSUPP for intercepts to
the place where it belongs and convert it to -EREMOTE.
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
We currently do some magic shifting (by exploiting that exit codes
are always a multiple of 4) and a table lookup to jump into the
exit handlers. This causes some calculations and checks, just to
do an potentially expensive function call.
Changing that to a switch statement gives the compiler the chance
to inline and dynamically decide between jump tables or inline
compare and branches. In addition it makes the code more readable.
bloat-o-meter gives me a small reduction in code size:
add/remove: 0/7 grow/shrink: 1/1 up/down: 986/-1334 (-348)
function old new delta
kvm_handle_sie_intercept 72 1058 +986
handle_prog 704 696 -8
handle_noop 54 - -54
handle_partial_execution 60 - -60
intercept_funcs 120 - -120
handle_instruction 198 - -198
handle_validity 210 - -210
handle_stop 316 - -316
handle_external_interrupt 368 - -368
Right now my gcc does conditional branches instead of jump tables.
The inlining seems to give us enough cycles as some micro-benchmarking
shows minimal improvements, but still in noise.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Our implementation will never trigger interception code 12 as the
responsible setting is never enabled - and never will be.
The handler is dead code. Let's get rid of it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
In access register mode, the write_guest() read_guest() and other
functions will invoke the access register translation, which
requires an ar, designated by one of the instruction fields.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
A new exception type for vector instructions is introduced with
the new processor, but is handled exactly like a Data Exception
which is already handled by the system.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
The handler for MVPG partial execution interception does not take
the current CPU addressing mode into account yet, so addresses are
always treated as 64-bit addresses. For correct behaviour, we should
properly handle 24-bit and 31-bit addresses, too.
Since MVPG is defined to work with logical addresses, we can simply
use guest_translate_address() to achieve the required behaviour
(since DAT is disabled here, guest_translate_address() skips the MMU
translation and only translates the address via kvm_s390_logical_to_effective()
and kvm_s390_real_to_abs(), which is exactly what we want here).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Only one external call may be pending at a vcpu at a time. For this
reason, we have to detect whether the SIGP externcal call interpretation
facility is available. If so, all external calls have to be injected
using this mechanism.
SIGP EXTERNAL CALL orders have to return whether another external
call is already pending. This check was missing until now.
SIGP SENSE hasn't returned yet in all conditions whether an external
call was pending.
If a SIGP EXTERNAL CALL irq is to be injected and one is already
pending, -EBUSY is returned.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
As a SIGP STOP is an interrupt with the least priority, it may only result
in stop of the vcpu when no other interrupts are left pending.
To detect whether a non-stop irq is pending, we need a way to mask out
stop irqs from the general kvm_cpu_has_interrupt() function. For this
reason, the existing function (with an outdated name) is replaced by
kvm_s390_vcpu_has_irq() which allows to mask out pending stop irqs.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch removes the famous action_bits and moves the handling of
SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt.
The new local interrupt infrastructure is used to track pending stop
requests.
STOP irqs are the only irqs that don't get actively delivered. They
remain pending until the stop function is executed (=stop intercept).
If another STOP irq is already pending, -EBUSY will now be returned
(needed for the SIGP handling code).
Migration of pending SIGP STOP (AND STORE STATUS) orders should now
be supported out of the box.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch adapts handling of local interrupts to be more compliant with
the z/Architecture Principles of Operation and introduces a data
structure
which allows more efficient handling of interrupts.
* get rid of li->active flag, use bitmap instead
* Keep interrupts in a bitmap instead of a list
* Deliver interrupts in the order of their priority as defined in the
PoP
* Use a second bitmap for sigp emergency requests, as a CPU can have
one request pending from every other CPU in the system.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
A couple of our interception handlers rewind the PSW to the beginning
of the instruction to run the intercepted instruction again during the
next SIE entry. This normally works fine, but there is also the
possibility that the instruction did not get run directly but via an
EXECUTE instruction.
In this case, the PSW does not point to the instruction that caused the
interception, but to the EXECUTE instruction! So we've got to rewind the
PSW to the beginning of the EXECUTE instruction instead.
This is now accomplished with a new helper function kvm_s390_rewind_psw().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch
- adds s390 specific MP states to linux headers and documents them
- implements the KVM_{SET,GET}_MP_STATE ioctls
- enables KVM_CAP_MP_STATE
- allows user space to control the VCPU state on s390.
If user space sets the VCPU state using the ioctl KVM_SET_MP_STATE, we can disable
manual changing of the VCPU state and trust user space to do the right thing.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Let's move the finalization of SIGP STOP and SIGP STOP AND STORE STATUS orders to
the point where the VCPU is actually stopped.
This change is needed to prepare for a user space driven VCPU state change. The
action_bits may only be cleared when setting the cpu state to STOPPED while
holding the local irq lock.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL
operations will be interpreted instead of intercepted. A partial execution
interception will occurr at the sending cpu only if the target cpu is in the
wait state ("W" bit in the cpuflags set). Instruction interception will only
happen in error cases (e.g. cpu addr invalid).
As a sending cpu might set the external call interrupt pending flags at the
target cpu at every point in time, we can't handle this kind of interrupt using
our kvm interrupt injection mechanism. The injection will be done automatically
by the SIE when preparing the start of the target cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Thomas Huth <thuth@linux.vnet.ibm.com>
[Adopt external call injection to check for sigp interpretion]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Use the new helper function kvm_arch_fault_in_page() for faulting-in
the guest pages and only inject addressing errors when we've really
hit a bad address (and return other error codes to userspace instead).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
If the new PSW for program interrupts is invalid, the VM ends up
in an endless loop of specification exceptions. Since there is not
much left we can do in this case, we should better drop to userspace
instead so that the crash can be reported to the user.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
The external interrupt interception can only occur in rare cases, e.g.
when the PSW of the interrupt handler has a bad value. The old handler
for this interception simply ignored these events (except for increasing
the exit_external_interrupt counter), but for proper operation we either
have to inject the interrupts manually or we should drop to userspace in
case of errors.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch introduces two new functions to set/clear the CPUSTAT_STOPPED bit and
makes use of it at all applicable places. These functions prepare the additional
execution of code when starting/stopping a vcpu.
The CPUSTAT_STOPPED bit should not be touched outside of these functions.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
When the guest executes the MVPG instruction with DAT disabled,
and the source or destination page is not mapped in the host,
the so-called partial execution interception occurs. We need to
handle this event by setting up a mapping for the corresponding
user pages.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Factor out the new function handle_itdb(), which copies the ITDB into
guest lowcore to fully handle a TX abort.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
The generically assembled low core labels already contain the
address for the TDB.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).
All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Whenever a program interrupt is intercepted, some parameters are stored in the
sie control block. These parameters have to be extracted in order to be
reinjected correctly. This patch also takes care of intercepted PER events which
can occurr in addition to any program interrupt.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Convert handle_prog() to new guest access functions.
Also make the code a bit more readable and look at the return code
of write_guest_lc() which was missing before.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch enables transactional execution for KVM guests
on s390 systems zec12 or later.
We rework the allocation of the page containing the sie_block
to also back the Interception Transaction Diagnostic Block.
If available the TE facilities will be enabled.
Setting bit 73 and 50 in vfacilities bitmask reveals the HW
facilities Transactional Memory and Constraint Transactional
Memory respectively to the KVM guest.
Furthermore, the patch restores the Program-Interruption TDB
from the Interception TDB in case a program interception has
occurred and the ITDB has a valid format.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
The need for SIE_INTERCEPT_RERUNVCPU has been removed long ago already,
with the following commit:
f7850c92884b40915001e332a0a33ed4f10158e8
[S390] remove kvm mmu reload on s390
Since the remainders are dead code, they are now removed by this patch.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
LCTL and LCTLG are also privileged instructions, thus there is no need for
treating them separately from the other instructions in priv.c. So this
patch moves these two instructions to priv.c, adds a check for supervisor
state and simplifies the "handle_eb" instruction decoding by merging the
two eb_handlers jump tables from intercept.c and priv.c into one table only.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The guest prefix pages must be mapped writeable all the time
while SIE is running, otherwise the guest might see random
behaviour. (pinned at the pte level) Turns out that mlocking is
not enough, the page table entry (not the page) might change or
become r/o. This patch uses the gmap notifiers to kick guest
cpus out of SIE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
kvm_s390_inject_program_int() and friends may fail if no memory is available.
This must be reported to the calling functions, so that this gets passed
down to user space which should fix the situation.
Alternatively we end up with guest state corruption.
So fix this and enforce return value checking by adding a __must_check
annotation to all of these function prototypes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Add missing address space annotations to all put_guest()/get_guest() callers.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The put_guest_u*/get_guest_u* are nothing but wrappers for the regular
put_user/get_user uaccess functions. The only difference is that before
accessing user space the guest address must be translated to a user space
address.
Change the order of arguments for the guest access functions so they
match their uaccess parts. Also remove the u* suffix, so we simply
have put_guest/get_guest which will automatically use the right size
dependent on pointer type of the destination/source that now must be
correct.
In result the same behaviour as put_user/get_user except that accesses
must be aligned.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Let's change to the paradigm that every return code from guest memory
access functions that is not zero translates to -EFAULT and do not
explictly compare.
Explictly comparing the return value with -EFAULT has already shown to
be a bit fragile. In addition this is closer to the handling of
copy_to/from_user functions, which imho is in general a good idea.
Also shorten the return code handling in interrupt.c a bit.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:
- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
related processing.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Explicitely catch all channel I/O related instructions intercepts
in the kernel and set condition code 3 for them.
This paves the way for properly handling these instructions later
on.
Note: This is not architecture compliant (the previous code wasn't
either) since setting cc 3 is not the correct thing to do for some
of these instructions. For Linux guests, however, it still has the
intended effect of stopping css probing.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Add support for injecting machine checks (only repressible
conditions for now).
This is a bit more involved than I/O interrupts, for these reasons:
- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
a roundabout approach with trapping PSW changing instructions and
watching for opened machine checks.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Introduce helper functions for decoding the various base/displacement
instruction formats.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
These tables are never modified.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Introduce a new trace system, kvm-s390, for some kvm/s390 specific
trace points:
- injection of interrupts
- delivery of interrupts to the guest
- creation/destruction of kvm machines and vcpus
- stop actions for vcpus
- reset requests for userspace
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Add trace events for several s390 architecture specifics:
- SIE entry/exit
- common intercepts
- common instructions (sigp/diagnose)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.
Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Handle the mandatory intercept SET CLOCK PROGRAMMABLE FIELD
instruction.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
In handle_stop() handle the stop bit before doing the store status as
described for "Stop and Store Status" in the Principles of Operation.
We have to give up the local_int.lock before calling kvm store status
since it calls gmap_fault() which might sleep. Since local_int.lock
only protects local_int.* and not guest memory we can give up the lock.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch adds the general purpose registers to the kvm_run structure.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped.
This is not, however, what the architecture says: RUNNING should be
set when the host is acting on the behalf of the guest operating
system.
CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load()
and to be unset in kvm_arch_vcpu_put().
For signifying stopped state of a vcpu, a host-controlled bit has
been used and is set/unset basically on the reverse as the old
CPUSTAT_RUNNING bit (including pushing it down into stop handling
proper in handle_stop()).
Cc: stable@kernel.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch removes kvm-s390 internal assumption of a linear mapping
of guest address space to user space. Previously, guest memory was
translated to user addresses using a fixed offset (gmsor). The new
code uses gmap_fault to resolve guest addresses.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
