summaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2009-06-18sh: defconfig updates.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: pci: Initial PCI-Express support for SH7786 Urquell board.Paul Mundt
This adds initial support for the PCI-Express module in the SH7786, particularly as it relates to the urquell platform. Presently it is only supported in root complex mode, with endpoint mode still requiring more debugging. 29/32-bit mode and lane configurations are selectable via board mode pins, and are otherwise fixed. Only 4x and 1x PCI channels are presently handled, the PCI bridge still requires additional debugging and stabilization in hardware. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17Merge branches 'sh/pci-express-integration', 'sh/rsk-updates', ↵Paul Mundt
'sh/platform-updates' and 'sh/perf_counter'
2009-06-17sh: Generic HAVE_PERF_COUNTER support.Paul Mundt
This enables support for the generic software-based perf counters. Hardware counter support could be added in the future, but the lack of a performance counter IRQ makes this rather dubious. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17SH: convert migor to soc-camera as platform-deviceGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17SH: convert ap325rxa to soc-camera as platform-deviceGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17soc-camera: unify i2c camera device platform dataGuennadi Liakhovetski
Unify i2c camera device platform data to point to struct soc_camera_link for a smooth transition to soc-camera as a platform driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: add platform data for r8a66597-hcd in setup-sh7723Yoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: add platform data for r8a66597-hcd in setup-sh7366Yoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: x3proto: add platform data for r8a66597-hcdYoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: highlander: add platform data for r8a66597-hcdYoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: sh7785lcr: add platform data for r8a66597-hcdYoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: use kzalloc() for cpg clocksMagnus Damm
Convert the shared clock cpg code from bootmem to slab. Without this patch the current bootmem code triggers WARN_ON() because the slab is available. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: unbreak WARN_ON()Magnus Damm
Fix WARN_ON() by modifying the bug trap handling code to always return in the in-kernel instruction pointer case. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17kmap_types: make most arches use generic header fileRandy Dunlap
Convert most arches to use asm-generic/kmap_types.h. Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h, controlled by __WITH_KM_FENCE from each arch's kmap_types.h file. Would be nice to be able to add custom KM_types per arch, but I don't yet see a nice, clean way to do that. Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and 68k(tonyb). Note: avr32 should be able to remove KM_PTE2 (since it's not used) and then just use the generic kmap_types.h file. Get avr32 maintainer approval. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Bryan Wu <cooloney@kernel.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17mm: consolidate init_mm definitionAlexey Dobriyan
* create mm/init-mm.c, move init_mm there * remove INIT_MM, initialize init_mm with C99 initializer * unexport init_mm on all arches: init_mm is already unexported on x86. One strange place is some OMAP driver (drivers/video/omap/) which won't build modular, but it's already wants get_vm_area() export. Somebody should look there. [akpm@linux-foundation.org: add missing #includes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17sh: Use generic atomic64_t implementation.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: Revised clock function in highlanderNobuhiro Iwamatsu
Clock function was changed, but highlander used old function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: Update r7780mp defconfigNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: Add support mtd mapping for highlanderNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: pci: SH7786 PCI ops.Paul Mundt
This adds in preliminary support for the SH7786 PCIe module PCI ops, and the corresponding module definitions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: pci: Allow register_pci_controller() to handle overlapping regions.Paul Mundt
Some host controllers (such as SH7786) have overlapping regions that are fixed in hardware. The resource allocator does the right thing in managing this space already, so the conflict case is non-fatal. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: smsc911x support for the rsk7203 boardMagnus Damm
This patch adds support for the LAN9118 ethernet on rsk7203. The LAN9118 controller is hooked up using a 16-bit data bus, but the rsk7203 board does not swap the byte lanes as needed between the sh7203 processor and the the ethernet controller. In the processor the CS memory window is configured in 16-bit mode but the smsc911x driver is told to do 32-bit accesses to improve performance. The SMSC911X_SWAP_FIFO flag is used to tell the driver to do software byte swapping of fifo data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: Set EARLY_SCIF_CONSOLE_PORT sanely for SH7786.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: urquell: Add system FPGA mode pin support.Paul Mundt
Urquell has a system FPGA capable of reading the mode pin states from software, wire this up in the machvec. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Make the atomic functions safe for irqsoff tracingMatt Fleming
The irqsoff tracer uses the atomic_* functions internally, but the implementations of those functions in arch/sh/include/asm/atomic-irq.h disable irqs to achieve atomicity. A continuous loop ensues where we disable interrupts, trace the interrupt disabling, call atomic_* functions, disable interrupts, trace the interrupt disabling, etc.. The simplest solution to all this is to just convert uses of local_irq_save()/local_irq_restore() the raw_* equivalents because the raw_* equivalents don't call trace_hardirqs_on()/trace_hardirqs_off(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert sh64 to use the generic checksum code.Paul Mundt
This plugs in GENERIC_CSUM support on sh64, and kills off all of the old references. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Derive COMMAND_LINE_SIZE from asm-generic/setup.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Switch to asm-generic versions for identical headers.Paul Mundt
This switches over mman/param/parport/serial/socket/ucontext.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/signal.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/types.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/scatterlist.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/unaligned.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/module.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Conver to asm-generic/mmu_context.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Tidy up duplication in irq/swab/timex.h.Paul Mundt
The asm-generic versions have some helper definitions that we can use instead, drop our definitions and use those instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert ipc/shm bits to their asm-generic versions.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/termbits.h and termios.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/posix_types.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/dma.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Convert to asm-generic/current.h.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-06-14sh: Bump the earlytimer probe devices up.Paul Mundt
Presently the earlytimer probe handles the clockevents driver, which requires that the clockevents driver be registered first. This bumps it up by 1 to include the clocksource device, which can be safely ignored if it doesn't exist, as we will simply error out on that path and defer to the jiffies clocksource. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Use generic sched_clock().Paul Mundt
The generic sched_clock() handles INITIAL_JIFFIES now as well, so we can just use that instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: Bump the earlytimer bits back to time_init().Paul Mundt
These were handled through late_time_init due to kmalloc() and friends not being available earlier on previously. Now with slab caches being available much earlier, this is no longer necessary, and we can move the initialization up to an earlier point. One of the benefits with this is that printk times are available a bit earlier! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14cpumask: Use accessors for cpu_*_mask: shRusty Russell
Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14cpumask: use mm_cpumask() wrapper: shRusty Russell
Makes code futureproof against the impending change to mm->cpu_vm_mask. It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14cpumask: arch_send_call_function_ipi_mask: shRusty Russell
We're weaning the core code off handing cpumask's around on-stack. This introduces arch_send_call_function_ipi_mask(), and by defining it, the old arch_send_call_function_ipi is defined by the core code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14cpumask: remove the now-obsoleted pcibus_to_cpumask(): shRusty Russell
cpumask_of_pcibus() is the new version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: pci: remove duplicated #include'sHuang Weiyi
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>