summaryrefslogtreecommitdiff
path: root/arch/tile
AgeCommit message (Collapse)Author
2014-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull arch/tile updates from Chris Metcalf: "Note that one of the changes converts my old cmetcalf@tilera.com email in MAINTAINERS to the cmetcalf@ezchip.com email that you see on this email" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: update MAINTAINERS email to EZchip tile: avoid undefined behavior with regs[TREG_TP] etc arch: tile: kernel: kgdb.c: Use memcpy() instead of pointer copy one by one tile: Use the more common pr_warn instead of pr_warning arch: tile: gxio: Export symbols for module using in 'mpipe.c' arch: tile: kernel: signal.c: Use __copy_from/to_user() instead of __get/put_user()
2014-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
2014-12-11tile: use pr_warn instead of pr_warningJoe Perches
Use the more common pr_warn. Coalesce formats, realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-11tile: neaten early_printk usesJoe Perches
Coalesce the formats and align arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-11printk: remove used-once early_vprintkJoe Perches
Eliminate the unlikely possibility of message interleaving for early_printk/early_vprintk use. early_vprintk can be done via the %pV extension so remove this unnecessary function and change early_printk to have the equivalent vprintk code. All uses of early_printk already end with a newline so also remove the unnecessary newline from the early_printk function. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10net, lib: kill arch_fast_hash library bitsDaniel Borkmann
As there are now no remaining users of arch_fast_hash(), lets kill it entirely. This basically reverts commit 71ae8aac3e19 ("lib: introduce arch optimized hash library") and follow-up work, that is f.e., commit 237217546d44 ("lib: hash: follow-up fixups for arch hash"), commit e3fec2f74f7f ("lib: Add missing arch generic-y entries for asm-generic/hash.h") and last but not least commit 6a02652df511 ("perf tools: Fix include for non x86 architectures"). Cc: Francesco Fusco <fusco@ntop.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge branch 'irq-irqdomain-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq domain updates from Thomas Gleixner: "The real interesting irq updates: - Support for hierarchical irq domains: For complex interrupt routing scenarios where more than one interrupt related chip is involved we had no proper representation in the generic interrupt infrastructure so far. That made people implement rather ugly constructs in their nested irq chip implementations. The main offenders are x86 and arm/gic. To distangle that mess we have now hierarchical irqdomains which seperate the various interrupt chips and connect them via the hierarchical domains. That keeps the domain specific details internal to the particular hierarchy level and removes the criss/cross referencing of chip internals. The resulting hierarchy for a complex x86 system will look like this: vector mapped: 74 msi-0 mapped: 2 dmar-ir-1 mapped: 69 ioapic-1 mapped: 4 ioapic-0 mapped: 20 pci-msi-2 mapped: 45 dmar-ir-0 mapped: 3 ioapic-2 mapped: 1 pci-msi-1 mapped: 2 htirq mapped: 0 Neither ioapic nor pci-msi know about the dmar interrupt remapping between themself and the vector domain. If interrupt remapping is disabled ioapic and pci-msi become direct childs of the vector domain. In hindsight we should have done that years ago, but in hindsight we always know better :) - Support for generic MSI interrupt domain handling We have more and more non PCI related MSI interrupts, so providing a generic infrastructure for this is better than having all affected architectures implementing their own private hacks. - Support for PCI-MSI interrupt domain handling, based on the generic MSI support. This part carries the pci/msi branch from Bjorn Helgaas pci tree to avoid a massive conflict. The PCI/MSI parts are acked by Bjorn. I have two more branches on top of this. The full conversion of x86 to hierarchical domains and a partial conversion of arm/gic" * 'irq-irqdomain-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) genirq: Move irq_chip_write_msi_msg() helper to core PCI/MSI: Allow an msi_controller to be associated to an irq domain PCI/MSI: Provide mechanism to alloc/free MSI/MSIX interrupt from irqdomain PCI/MSI: Enhance core to support hierarchy irqdomain PCI/MSI: Move cached entry functions to irq core genirq: Provide default callbacks for msi_domain_ops genirq: Introduce msi_domain_alloc/free_irqs() asm-generic: Add msi.h genirq: Add generic msi irq domain support genirq: Introduce callback irq_chip.irq_write_msi_msg genirq: Work around __irq_set_handler vs stacked domains ordering issues irqdomain: Introduce helper function irq_domain_add_hierarchy() irqdomain: Implement a method to automatically call parent domains alloc/free genirq: Introduce helper irq_domain_set_info() to reduce duplicated code genirq: Split out flow handler typedefs into seperate header file genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked irqchip genirq: Add more helper functions to support stacked irq_chip genirq: Introduce helper functions to support stacked irq_chip irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain in case OF ...
2014-11-30netpoll: delete defconfig references to obsolete NETPOLL_TRAPPaul Gortmaker
In commit 9c62a68d13119a1ca9718381d97b0cb415ff4e9d ("netpoll: Remove dead packet receive code (CONFIG_NETPOLL_TRAP)") this Kconfig option was removed. So remove references to it from all defconfigs as well. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23PCI/MSI: Rename mask/unmask_msi_irq treewideThomas Gleixner
The PCI/MSI irq chip callbacks mask/unmask_msi_irq have been renamed to pci_msi_mask/unmask_irq to mark them PCI specific. Rename all usage sites. The conversion helper functions are kept around to avoid conflicts in next and will be removed after merging into mainline. Coccinelle assisted conversion. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: x86@kernel.org Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mohit Kumar <mohit.kumar@st.com> Cc: Simon Horman <horms@verge.net.au> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yijing Wang <wangyijing@huawei.com>
2014-11-23PCI/MSI: Rename write_msi_msg() to pci_write_msi_msg()Jiang Liu
Rename write_msi_msg() to pci_write_msi_msg() to mark it as PCI specific. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-13tile: avoid undefined behavior with regs[TREG_TP] etcChris Metcalf
Recent compilers warn about accesses to arrays past the end, which is supported for pt_regs and sigcontext with the intended alias past the end of regs[] to sp, tp, and lr using TREG_SP, TREG_TP, and TREG_LR. Make the intended usage explict by providing an anonymous union of regs[56] on the one hand, and a short __regs[53] on the other followed by the sp, tp, and lr fields, so the aliasing is done explicitly and is visible to the compiler. Reviewed-by: Jeff Epler <jepler@unpythonic.net> Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2014-11-12arch: tile: kernel: kgdb.c: Use memcpy() instead of pointer copy one by oneChen Gang
Not only memcpy() is faster than pointer copy, but also let code more clearer and simple, which can avoid compiling warning (the original implementation copy registers by exceeding member array border). The related warning (with allmodconfig under tile): CC arch/tile/kernel/kgdb.o arch/tile/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs': arch/tile/kernel/kgdb.c:140:31: warning: iteration 53u invokes undefined behavior [-Waggressive-loop-optimizations] *(ptr++) = thread_regs->regs[reg]; ^ arch/tile/kernel/kgdb.c:139:2: note: containing loop for (reg = 0; reg <= TREG_LAST_GPR; reg++) ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2014-11-11tile: Use the more common pr_warn instead of pr_warningJoe Perches
And other message logging neatening. Other miscellanea: o coalesce formats o realign arguments o standardize a couple of macros o use __func__ instead of embedding the function name Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-11-11arch: tile: gxio: Export symbols for module using in 'mpipe.c'Chen Gang
'gxio_mpipe_adjust_timestamp', 'gxio_mpipe_link_instance', 'gxio_mpipe_get_timestamp', and 'gxio_mpipe_set_timestamp' may be use by other tile modules, so export them. The related error (with allmodconfig under tile): MODPOST 4002 modules ERROR: "gxio_mpipe_link_instance" [drivers/net/ethernet/tile/tile_net.ko] undefined! ERROR: "gxio_mpipe_get_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined! ERROR: "gxio_mpipe_set_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined! ERROR: "gxio_mpipe_adjust_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-11-04arch: tile: kernel: signal.c: Use __copy_from/to_user() instead of ↵Chen Gang
__get/put_user() setup/restore_sigcontext() want to copy all related registers between user and kernel. So use block copy instead of each registers copy. Then can let code simple and clearer (which can avoid compiler's warning): The related warning (with allmodconfig under tile): CC arch/tile/kernel/signal.o In file included from include/linux/poll.h:11:0, from include/linux/ring_buffer.h:7, from include/linux/ftrace_event.h:5, from include/trace/syscall.h:6, from include/linux/syscalls.h:81, from arch/tile/kernel/signal.c:30: arch/tile/kernel/signal.c: In function 'setup_sigcontext': arch/tile/kernel/signal.c:116:31: warning: iteration 53u invokes undefined behavior [-Waggressive-loop-optimizations] err |= __put_user(regs->regs[i], &sc->gregs[i]); ^ ./arch/tile/include/asm/uaccess.h:236:26: note: in definition of macro '__put_user_asm' : "r" (ptr), "r" (x), "i" (-EFAULT)) ^ ./arch/tile/include/asm/uaccess.h:297:10: note: in expansion of macro '__put_user_8' case 8: __put_user_8(x, ptr, __ret); break; \ ^ arch/tile/kernel/signal.c:116:10: note: in expansion of macro '__put_user' err |= __put_user(regs->regs[i], &sc->gregs[i]); ^ arch/tile/kernel/signal.c:115:2: note: containing loop for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i) ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-20tile: io: implement dummy relaxed accessor macros for writesWill Deacon
write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to tile, in the same vein as the dummy definitions for the relaxed read accessors. Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-09Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Main changes: - Fix the deadlock reported by Dave Jones et al - Clean up and fix nohz_full interaction with arch abilities - nohz init code consolidation/cleanup" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: nohz full depends on irq work self IPI support nohz: Consolidate nohz full init code arm64: Tell irq work about self IPI support arm: Tell irq work about self IPI support x86: Tell irq work about self IPI support irq_work: Force raised irq work to run on irq work interrupt irq_work: Introduce arch_irq_work_has_interrupt() nohz: Move nohz full init call to tick init
2014-10-02tile: add clock_gettime support to vDSOChris Metcalf
This change adds support for clock_gettime with CLOCK_REALTIME and CLOCK_MONOTONIC using vDSO. It also updates the vdso struct nomenclature used for the clocks to match the x86 code to keep it easier to update going forward. We also support the *_COARSE clockid_t, for apps that want speed but aren't concerned about fine-grained timestamps; this saves about 20 cycles per call (see http://lwn.net/Articles/342018/). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: John Stultz <john.stultz@linaro.org>
2014-10-02tile: switch to using seqlocks for the vDSO time codeChris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02tile gxio: use better string copy primitiveChris Metcalf
Both strncpy and strlcpy suffer from the fact that they do partial copies of strings into the destination when the target buffer is too small. This is frequently pointless since an overflow of the target buffer may make the result invalid. strncpy() makes it relatively hard to even detect the error condition, and with strlcpy() you have to duplicate the buffer size parameter to test to see if the result exceeds it. By returning zero in the failure case, we both make testing for it easy, and by simply not copying anything in that case, we make it mandatory for callers to test the error code. To catch lazy programmers who don't check, we also place a NUL at the start of the destination buffer (if there is space) to ensure that the result is an invalid string. At some point it may make sense to promote strscpy() to a global platform-independent function, but other than the reviewers, no one was interested on LKML, so for now leave the strscpy() function as file-static. Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02Removed repeated word in commentsKurt McAlpine
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02tilegx: Enable ARCH_SUPPORTS_ATOMIC_RMWChris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02tile: Remove tile-specific _sinitdata and _einitdataGeert Uytterhoeven
Use standard __init_begin and __init_end instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02tile: use ARRAY_SIZEHimangi Saraogi
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: // <smpl> @i@ @@ @@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-09-13irq_work: Introduce arch_irq_work_has_interrupt()Peter Zijlstra
The nohz full code needs irq work to trigger its own interrupt so that the subsystem can work even when the tick is stopped. Lets introduce arch_irq_work_has_interrupt() that archs can override to tell about their support for this ability. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-08-29flush_icache_range: export symbol to fix build errorsPranith Kumar
Fix building errors occuring due to a missing export of flush_icache_range() in kisskb.ellerman.id.au/kisskb/buildresult/11677809/ ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined! Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Noam Camus <noamc@ezchip.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Zhigang Lu <zlu@tilera.com> [tile] Cc: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29kexec: remove CONFIG_KEXEC dependency on cryptoVivek Goyal
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-26tile: Use this_cpu_ptr() for hardware countersChristoph Lameter
Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26tile: Replace __get_cpu_var usesChristoph Lameter
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-09Merge branch 'signal-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc Pull arch signal handling cleanup from Richard Weinberger: "This patch series moves all remaining archs to the get_signal(), signal_setup_done() and sigsp() functions. Currently these archs use open coded variants of the said functions. Further, unused parameters get removed from get_signal_to_deliver(), tracehook_signal_handler() and signal_delivered(). At the end of the day we save around 500 lines of code." * 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits) powerpc: Use sigsp() openrisc: Use sigsp() mn10300: Use sigsp() mips: Use sigsp() microblaze: Use sigsp() metag: Use sigsp() m68k: Use sigsp() m32r: Use sigsp() hexagon: Use sigsp() frv: Use sigsp() cris: Use sigsp() c6x: Use sigsp() blackfin: Use sigsp() avr32: Use sigsp() arm64: Use sigsp() arc: Use sigsp() sas_ss_flags: Remove nested ternary if Rip out get_signal_to_deliver() Clean up signal_delivered() tracehook_signal_handler: Remove sig, info, ka and regs ...
2014-08-08kexec: load and relocate purgatory at kernel load timeVivek Goyal
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate areaAndy Lutomirski
The core mm code will provide a default gate area based on FIXADDR_USER_START and FIXADDR_USER_END if !defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR). This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit UML, and x86_32 have their own code just to disable it. arm, 32-bit UML, and x86_64 have gate areas, but they have their own implementations. This gets rid of the default and moves the code into ia64. This should save some code on architectures without a gate area: it's now possible to inline the gate_area functions in the default case. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle] Acked-by: Richard Weinberger <richard@nod.at> [for um] Acked-by: Will Deacon <will.deacon@arm.com> [for arm64] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nathan Lynch <Nathan_Lynch@mentor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08proc: convert /proc/$PID/hardwall to seq_file interfaceAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07Merge branch 'akpm' (patchbomb from Andrew Morton)Linus Torvalds
Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ...
2014-08-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits) scsi: do not issue SCSI RSOC command to Promise Vtrak E610f vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Fix invalid return when request_irq() failed lpfc: Remove superfluous call to pci_disable_msix() isci: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Cleanup bfad_setup_intr() function bfa: Do not call pci_enable_msix() after it failed once fnic: Use pci_enable_msix_exact() instead of pci_enable_msix() scsi: use short driver name for per-driver cmd slab caches scsi_debug: support scsi-mq, queues and locks Drivers: add blist flags scsi: ufs: fix endianness sparse warnings scsi: ufs: make undeclared functions static bnx2i: Update driver version to 2.7.10.1 pm8001: fix a memory leak in nvmd_resp pm8001: fix update_flash pm8001: fix a memory leak in flash_update pm8001: Cleaning up uninitialized variables pm8001: Fix to remove null pointer checks that could never happen ...
2014-08-07mm/vmalloc.c: clean up map_vm_area third argumentWANG Chao
Currently map_vm_area() takes (struct page *** pages) as third argument, and after mapping, it moves (*pages) to point to (*pages + nr_mappped_pages). It looks like this kind of increment is useless to its caller these days. The callers don't care about the increments and actually they're trying to avoid this by passing another copy to map_vm_area(). The caller can always guarantee all the pages can be mapped into vm_area as specified in first argument and the caller only cares about whether map_vm_area() fails or not. This patch cleans up the pointer movement in map_vm_area() and updates its callers accordingly. Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06tile: Use get_signal() signal_setup_done()Richard Weinberger
Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2014-08-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-08-04Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - big rtmutex and futex cleanup and robustification from Thomas Gleixner - mutex optimizations and refinements from Jason Low - arch_mutex_cpu_relax() removal and related cleanups - smaller lockdep tweaks" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) arch, locking: Ciao arch_mutex_cpu_relax() locking/lockdep: Only ask for /proc/lock_stat output when available locking/mutexes: Optimize mutex trylock slowpath locking/mutexes: Try to acquire mutex only if it is unlocked locking/mutexes: Delete the MUTEX_SHOW_NO_WAITER macro locking/mutexes: Correct documentation on mutex optimistic spinning rtmutex: Make the rtmutex tester depend on BROKEN futex: Simplify futex_lock_pi_atomic() and make it more robust futex: Split out the first waiter attachment from lookup_pi_state() futex: Split out the waiter check from lookup_pi_state() futex: Use futex_top_waiter() in lookup_pi_state() futex: Make unlock_pi more robust rtmutex: Avoid pointless requeueing in the deadlock detection chain walk rtmutex: Cleanup deadlock detector debug logic rtmutex: Confine deadlock logic to futex rtmutex: Simplify remove_waiter() rtmutex: Document pi chain walk rtmutex: Clarify the boost/deboost part rtmutex: No need to keep task ref for lock owner check rtmutex: Simplify and document try_to_take_rtmutex() ...
2014-07-23timekeeping: Create struct tk_read_base and use it in struct timekeeperThomas Gleixner
The members of the new struct are the required ones for the new NMI safe accessor to clcok monotonic. In order to reuse the existing timekeeping code and to make the update of the fast NMI safe timekeepers a simple memcpy use the struct for the timekeeper as well and convert all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23clocksource: Get rid of cycle_lastThomas Gleixner
cycle_last was added to the clocksource to support the TSC validation. We moved that to the core code, so we can get rid of the extra copy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23tile: Convert VDSO timekeeping to the precise mechanismThomas Gleixner
The code was only halfarsed converted to the new VSDO update mechanism and still uses the inaccurate base value which lacks the fractional part of xtime_nsec. Fix it up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-18tile: ftrace: Remove check of obsolete variable function_trace_stopSteven Rostedt (Red Hat)
Nothing sets function_trace_stop to disable function tracing anymore. Remove the check for it in the arch code. Cc: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Zhigang Lu<zlu@tilera.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-17tgt: defconfig cleanupBart Van Assche
Because of the removal of the scsi_tgt kernel module, the kbuild variables CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS are obsolete. This patch removes these variables. This patch is the result of the following command: find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-07-17arch, locking: Ciao arch_mutex_cpu_relax()Davidlohr Bueso
The arch_mutex_cpu_relax() function, introduced by 34b133f, is hacky and ugly. It was added a few years ago to address the fact that common cpu_relax() calls include yielding on s390, and thus impact the optimistic spinning functionality of mutexes. Nowadays we use this function well beyond mutexes: rwsem, qrwlock, mcs and lockref. Since the macro that defines the call is in the mutex header, any users must include mutex.h and the naming is misleading as well. This patch (i) renames the call to cpu_relax_lowlatency ("relax, but only if you can do it with very low latency") and (ii) defines it in each arch's asm/processor.h local header, just like for regular cpu_relax functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax, and thus we can take it out of mutex.h. While this can seem redundant, I believe it is a good choice as it allows us to move out arch specific logic from generic locking primitives and enables future(?) archs to transparently define it, similarly to System Z. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Blanchard <anton@samba.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bharat Bhushan <r65777@freescale.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Joe Perches <joe@perches.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Joseph Myers <joseph@codesourcery.com> Cc: Kees Cook <keescook@chromium.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Stratos Karafotis <stratosk@semaphore.gr> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Kulikov <segoon@openwall.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Waiman Long <Waiman.Long@hp.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: adi-buildroot-devel@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-alpha@vger.kernel.org Cc: linux-am33-list@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-cris-kernel@axis.com Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux@lists.openrisc.net Cc: linux-m32r-ja@ml.linux-m32r.org Cc: linux-m32r@ml.linux-m32r.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-metag@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull arch/tile changes from Chris Metcalf: "These mostly just address smaller issues reported to me" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO replace strict_strto* call with kstrto* tile: Update comments for generic idle conversion tile: cleanup the comment in init_pgprot tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
2014-06-08arch: tile: kernel: unaligned.c: Cleaning up uninitialized variablesRickard Strandqvist
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [minor cleanups]
2014-06-06tile: convert use of typedef ctl_table to struct ctl_tableJoe Perches
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04Merge branch 'akpm' (patchbomb from Andrew) into nextLinus Torvalds
Merge misc updates from Andrew Morton: - a few fixes for 3.16. Cc'ed to stable so they'll get there somehow. - various misc fixes and cleanups - most of the ocfs2 queue. Review is slow... - most of MM. The MM queue is pretty huge this time, but not much in the way of feature work. - some tweaks under kernel/ - printk maintenance work - updates to lib/ - checkpatch updates - tweaks to init/ * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits) fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul init/main.c: remove an ifdef kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND init/main.c: add initcall_blacklist kernel parameter init/main.c: don't use pr_debug() fs/binfmt_flat.c: make old_reloc() static fs/binfmt_elf.c: fix bool assignements fs/efs: convert printk(KERN_DEBUG to pr_debug fs/efs: add pr_fmt / use __func__ fs/efs: convert printk to pr_foo() scripts/checkpatch.pl: device_initcall is not the only __initcall substitute checkpatch: check stable email address checkpatch: warn on unnecessary void function return statements checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar); checkpatch: add warning for kmalloc/kzalloc with multiply checkpatch: warn on #defines ending in semicolon checkpatch: make --strict a default for files in drivers/net and net/ checkpatch: always warn on missing blank line after variable declaration block checkpatch: fix wildcard DT compatible string checking ...