summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2011-12-12x86/i386: Use less assembly in strlen(), speed things up a bitAlexey Dobriyan
Current i386 strlen() hardcodes NOT/DEC sequence. DEC is mentioned to be suboptimal on Core2. So, put only REPNE SCASB sequence in assembly, compiler can do the rest. The difference in generated code is like below (MCORE2=y): <strlen>: push %edi mov $0xffffffff,%ecx mov %eax,%edi xor %eax,%eax repnz scas %es:(%edi),%al not %ecx - dec %ecx - mov %ecx,%eax + lea -0x1(%ecx),%eax pop %edi ret Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Beulich <JBeulich@suse.com> Link: http://lkml.kernel.org/r/20111211181319.GA17097@p183.telecom.by Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-07x86: Use the same node_distance for 32 and 64-bitH Hartley Sweeten
The node_distance function is not x86 64-bit specific. Having the #ifdef around the extern function declaration and the #define causes the default node_distance macro to be used in asm-generic/topology.h. This also causes a sparse warning in arch/x86/mm/numa.c when CONFIG_X86_64 is not set: warning: symbol '__node_distance' was not declared. Should it be static? Remove the #ifdef to fix both issues. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1112061220310.28251@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06x86: Fix rflags in FAKE_STACK_FRAMESeiichi Ikarashi
The x86_64 kernel pushes the fake kernel stack in arch/x86/kernel/entry_64.S:FAKE_STACK_FRAME, and rflags register in it does not conform to the specification. Although Intel's manual[1] says bit 1 of it shall be set to 1, this bit is cleared to 0 on pushing the fake stack. [1] Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.1 3-21 Figure 3-8. EFLAGS Register If it is not on purpose, it is better to be fixed, because it can lead some tools misunderstanding the stack frame. For example, "crash" utility[2] actually detects it and warns you like below: RIP: ffffffff8005dfa2 RSP: ffff8104ce0c7f58 RFLAGS: 00000200 [...] bt: WARNING: possibly bogus exception frame Signed-off-by: Seiichi Ikarashi <s.ikarashi@jp.fujitsu.com> Tested-by: Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06x86: Clean up and extend do_int3()Srikar Dronamraju
Since there is a possibility of !KPROBES int3 listeners (such as kgdb) and since DIE_TRAP is currently not being used by anybody, notify all listeners with DIE_INT3. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20111025142159.GB21225@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06x86: Call do_notify_resume() with interrupts enabledSrikar Dronamraju
do_notify_resume() gets called with interrupts disabled on x86_32. This is different from the x86_64 behavior, where interrupts are enabled at the time. Queries on lkml on this issue hasn't yielded any clear answer. Lets make x86_32 behave the same as x86_64, unless there is a real reason to maintain status quo. Please refer https://lkml.org/lkml/2011/9/27/130 for more details. A similar change was suggested in ARM: https://lkml.org/lkml/2011/8/25/231 My 32-bit machine works fine (tm) with this patch. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20111025141812.GA21225@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86/div64: Add a micro-optimization shortcut if base is power of twoSebastian Andrzej Siewior
In the target code I have a do_div(x, PAGE_SIZE). The x86-64 version of it was doing a shift and a mask which is clever. The 32bit version of it had a div operation in it which made me think. After digging I noticed that x86 has an optimized version of it. This patch adds this shift and mask optimization if base is constant so we don't have any runtime "checking" overhead since most users use a power of ten. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1322649814-544-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86-64: Cleanup some assembly entry pointsJan Beulich
system_call_after_swapgs doesn't really benefit from forcing alignment from it - quite the opposite, native code needlessly so far got a big NOP instruction inserted in front of it. Xen being the only user of the separate entry point can well live with the branch going to three bytes into a cache line. The compatibility mode ptregs entry points for one can make use of the GLOBAL() macro, and should be suitably aligned. Their shared continuation point (ia32_ptregs_common) otoh doesn't need to be global at all, but should continue to be properly aligned. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CEEA020000780006407D@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86-64: Slightly shorten line system call entry and exit pathsJan Beulich
GET_THREAD_INFO() involves a memory read immediately followed by an "sub" on the value read, in turn (in several cases) immediately followed by a use of the calculated value as the base address of a memory access. This combination of instructions has a non-negligible potential for stalls. In the system call entry point code, however, the (fixed) offset of the stack pointer from the end of the stack is generally known, and hence we can instead avoid the memory load and subtract, and instead do the memory reference using %rsp as the base register. To do so in a legible fashion, introduce a THREAD_INFO() macro which, provided a register (generally %rsp) and the known offset from the end of the stack, produces a suitable memory access operand. The patch attempts to only touch the fast paths (no auditing and alike), but manages to do so only in the 64-bit entry point case; the compatibility mode entry points have so many interdependencies between their various branch targets that it was necessary to also adjust the slow paths to eliminate the risk of having missed some register dependency during code analysis. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CD690200007800064075@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86-64: Reduce amount of redundant code generated for invalidate_interruptNNJan Beulich
Previously these up to 32 entry points, consisting of all the same code except for their very first instruction, consumed 0x70 bytes per instance. Just like for device interrupt entry points, fold them together so that they all use a single instance of the code after having pushed their vector indicator (resulting in 0x10 bytes per instance, to retain 16-byte alignment of the individual entry points). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4CA230200007800064065@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86-64: Slightly shorten int_ret_from_sys_callJan Beulich
Testing for a return to ring 0 was necessary here solely because of the branch out of ret_from_fork. That branch, however, can be directed to retint_restore_args, and thus the test-and-branch can be eliminated here. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/4ED4C7EE0200007800064028@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86, efi: Convert efi_phys_get_time() args to physical addressesMaurice Ma
Because callers of efi_phys_get_time() pass virtual stack addresses as arguments, we need to find their corresponding physical addresses and when calling GetTime() in physical mode. Without this patch the following line is printed on boot, "Oops: efitime: can't read time!" Signed-off-by: Maurice Ma <maurice.ma@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Link: http://lkml.kernel.org/r/1318330333-4617-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86: Default to vsyscall=emulateAndy Lutomirski
This essentially reverts: 2b666859ec32: x86: Default to vsyscall=native for now The ABI breakage should now be fixed by: commit 48c4206f5b02f28c4c78a1f5b491d3772fb64fb9 Author: Andy Lutomirski <luto@mit.edu> Date: Thu Oct 20 08:48:19 2011 -0700 x86-64: Set siginfo and context on vsyscall emulation faults Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: richard -rw- weinberger <richard.weinberger@gmail.com> Cc: Adrian Bunk <bunk@stusta.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/93154af3b2b6d208906ae02d80d92cf60c6fa94f.1320712291.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05x86-64: Set siginfo and context on vsyscall emulation faultsAndy Lutomirski
To make this work, we teach the page fault handler how to send signals on failed uaccess. This only works for user addresses (kernel addresses will never hit the page fault handler in the first place), so we need to generate signals for those separately. This gets the tricky case right: if the user buffer spans multiple pages and only the second page is invalid, we set cr2 and si_addr correctly. UML relies on this behavior to "fault in" pages as needed. We steal a bit from thread_info.uaccess_err to enable this. Before this change, uaccess_err was a 32-bit boolean value. This fixes issues with UML when vsyscall=emulate. Reported-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: richard -rw- weinberger <richard.weinberger@gmail.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/4c8f91de7ec5cd2ef0f59521a04e1015f11e42b4.1320712291.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05Merge branch 'upstream/ticketlock-cleanup' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into x86/asm
2011-12-04x86: Fix boot failures on older AMD CPU'sLinus Torvalds
People with old AMD chips are getting hung boots, because commit bcb80e53877c ("x86, microcode, AMD: Add microcode revision to /proc/cpuinfo") moved the microcode detection too early into "early_init_amd()". At that point we are *so* early in the booth that the exception tables haven't even been set up yet, so the whole rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); doesn't actually work: if the rdmsr does a GP fault (due to non-existant MSR register on older CPU's), we can't fix it up yet, and the boot fails. Fix it by simply moving the code to a slightly later point in the boot (init_amd() instead of early_init_amd()), since the kernel itself doesn't even really care about the microcode patchlevel at this point (or really ever: it's made available to user space in /proc/cpuinfo, and updated if you do a microcode load). Reported-tested-and-bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Bob Tracy <rct@gherkin.frus.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-03xen/pm_idle: Make pm_idle be default_idle under Xen.Konrad Rzeszutek Wilk
The idea behind commit d91ee5863b71 ("cpuidle: replace xen access to x86 pm_idle and default_idle") was to have one call - disable_cpuidle() which would make pm_idle not be molested by other code. It disallows cpuidle_idle_call to be set to pm_idle (which is excellent). But in the select_idle_routine() and idle_setup(), the pm_idle can still be set to either: amd_e400_idle, mwait_idle or default_idle. This depends on some CPU flags (MWAIT) and in AMD case on the type of CPU. In case of mwait_idle we can hit some instances where the hypervisor (Amazon EC2 specifically) sets the MWAIT and we get: Brought up 2 CPUs invalid opcode: 0000 [#1] SMP Pid: 0, comm: swapper Not tainted 3.1.0-0.rc6.git0.3.fc16.x86_64 #1 RIP: e030:[<ffffffff81015d1d>] [<ffffffff81015d1d>] mwait_idle+0x6f/0xb4 ... Call Trace: [<ffffffff8100e2ed>] cpu_idle+0xae/0xe8 [<ffffffff8149ee78>] cpu_bringup_and_idle+0xe/0x10 RIP [<ffffffff81015d1d>] mwait_idle+0x6f/0xb4 RSP <ffff8801d28ddf10> In the case of amd_e400_idle we don't get so spectacular crashes, but we do end up making an MSR which is trapped in the hypervisor, and then follow it up with a yield hypercall. Meaning we end up going to hypervisor twice instead of just once. The previous behavior before v3.0 was that pm_idle was set to default_idle regardless of select_idle_routine/idle_setup. We want to do that, but only for one specific case: Xen. This patch does that. Fixes RH BZ #739499 and Ubuntu #881076 Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-25x86: consolidate xchg and xadd macrosJeremy Fitzhardinge
They both have a basic "put new value in location, return old value" pattern, so they can use the same macro easily. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-11-25x86/cmpxchg: add a locked add() helperJeremy Fitzhardinge
Mostly to remove some conditional code in spinlock.h. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-11-21fix braino in um patchset (mea culpa)Al Viro
wrong register returned... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-20Merge branch 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM guest: prevent tracing recursion with kvmclock Revert "KVM: PPC: Add support for explicit HIOR setting" KVM: VMX: Check for automatic switch msr table overflow KVM: VMX: Add support for guest/host-only profiling KVM: VMX: add support for switching of PERF_GLOBAL_CTRL KVM: s390: announce SYNC_MMU KVM: s390: Fix tprot locking KVM: s390: handle SIGP sense running intercepts KVM: s390: Fix RUNNING flag misinterpretation
2011-11-20KVM guest: prevent tracing recursion with kvmclockAvi Kivity
Prevent tracing of preempt_disable() in get_cpu_var() in kvm_clock_read(). When CONFIG_DEBUG_PREEMPT is enabled, preempt_disable/enable() are traced and this causes the function_graph tracer to go into an infinite recursion. By open coding the preempt_disable() around the get_cpu_var(), we can use the notrace version which prevents preempt_disable/enable() from being traced and prevents the recursion. Based on a similar patch for Xen from Jeremy Fitzhardinge. Tested-by: Gleb Natapov <gleb@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: random: Fix handing of arch_get_random_long in get_random_bytes() x86: Call stop_machine_text_poke() on all CPUs x86, ioapic: Only print ioapic debug information for IRQs belonging to an ioapic chip x86/mrst: Avoid reporting wrong nmi status x86/mrst: Add support for Penwell clock calibration x86/apic: Allow use of lapic timer early calibration result x86/apic: Do not clear nr_irqs_gsi if no legacy irqs x86/platform: Add a wallclock_init func to x86_platforms ops x86/mce: Make mce_chrdev_ops 'static const'
2011-11-18Merge branch 'stable/for-linus-fixes-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen-gntalloc: signedness bug in add_grefs() xen-gntalloc: integer overflow in gntalloc_ioctl_alloc() xen-gntdev: integer overflow in gntdev_alloc_map() xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs. xen/balloon: Avoid OOM when requesting highmem xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI xen: map foreign pages for shared rings by updating the PTEs directly
2011-11-17KVM: VMX: Check for automatic switch msr table overflowGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: VMX: Add support for guest/host-only profilingGleb Natapov
Support guest/host-only profiling by switch perf msrs on a guest entry if needed. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: VMX: add support for switching of PERF_GLOBAL_CTRLGleb Natapov
Some cpus have special support for switching PERF_GLOBAL_CTRL msr. Add logic to detect if such support exists and works properly and extend msr switching code to use it if available. Also extend number of generic msr switching entries to 8. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-16xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.Zhenzhong Duan
PVHVM running with more than 32 vcpus and pv_irq/pv_time enabled need VCPU placement to work, or else it will softlockup. CC: stable@kernel.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen: map foreign pages for shared rings by updating the PTEs directlyDavid Vrabel
When mapping a foreign page with xenbus_map_ring_valloc() with the GNTTABOP_map_grant_ref hypercall, set the GNTMAP_contains_pte flag and pass a pointer to the PTE (in init_mm). After the page is mapped, the usual fault mechanism can be used to update additional MMs. This allows the vmalloc_sync_all() to be removed from alloc_vm_area(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> [v1: Squashed fix by Michal for no-mmu case] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-11-14x86: Call stop_machine_text_poke() on all CPUsRabin Vincent
It appears that stop_machine_text_poke() wants to be called on all CPUs, like it's done from text_poke_smp(). Fix text_poke_smp_batch() to do this. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Jason Baron <jbaron@redhat.com> Link: http://lkml.kernel.org/r/1319702072-32676-1-git-send-email-rabin@rab.in Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-12bma023: Add SFI translation for this deviceWilliam Douglas
This needed the sfi IRQ 0xFF fix to go in first. It simply plumbs in the bma023 driver with the firmware naming of it. Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-12vrtc: change its year offset from 1960 to 1972Feng Tang
Real world year equals the value in vrtc YEAR register plus an offset. We used 1960 as the offset to make leap year consistent, but for a device's first use, its YEAR register is 0 and the system year will be parsed as 1960 which is not a valid UNIX time and will cause many applications to fail mysteriously. So we use 1972 instead to fix this issue. Updated patch which adds a sanity check suggested by Mathias This isn't a change in behaviour for systems, because 1972 is the one we actually use. It's the old version in upstream which is out of sync with all devices. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-12ce4100: fix a build errorZhang Rui
Fix a build error. CE4100 with no serial errors because the alternate function is only a prototype not a null function as intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-10x86, ioapic: Only print ioapic debug information for IRQs belonging to an ↵Mathias Nyman
ioapic chip with "apic=verbose" the print_IO_APIC() function tries to print IRQ to pin mappings for every active irq. It assumes chip_data is of type irq_cfg and may cause an oops if not. As the print_IO_APIC() is called from a late_initcall other chained irq chips may already be registered with custom chip_data information, causing an oops. This is the case with intel MID SoC devices with gpio demuxers registered as irq_chips. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> [ -v2: fixed build failure ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86/mrst: Avoid reporting wrong nmi statusJacob Pan
Moorestown/Medfield platform does not have port 0x61 to report NMI status, nor does it have external NMI sources. The only NMI sources are from lapic, as results of perf counter overflow or IPI, e.g. NMI watchdog or spin lock debug. Reading port 0x61 on Moorestown will return 0xff which misled NMI handlers to false critical errors such memory parity error. The subsequent ioport access for NMI handling can also cause undefined behavior on Moorestown. This patch allows kernel process NMI due to watchdog or backrace dump without unnecessary hangs. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> [hand applied] Signed-off-by: Alan Cox <alan@linux.intel.com>
2011-11-10x86/mrst: Add support for Penwell clock calibrationDirk Brandewie
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86/apic: Allow use of lapic timer early calibration resultJacob Pan
lapic timer calibration can be combined with tsc in platform specific calibration functions. if such calibration result is obtained early, we can skip the redundant calibration loops. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86/apic: Do not clear nr_irqs_gsi if no legacy irqsJacob Pan
nr_legacy_irqs is set in probe_nr_irqs_gsi, we should not clear it after that. Otherwise, the result is that MSI irqs will be allocated from the wrong range for the systems without legacy PIC. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86/platform: Add a wallclock_init func to x86_platforms opsFeng Tang
Some wall clock devices use MMIO based HW register, this new function will give them a chance to do some initialization work before their get/set_time service get called. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-08x86/mce: Make mce_chrdev_ops 'static const'Luck, Tony
Arjan would like to make struct file_operations const, but mce-inject directly writes to the mce_chrdev_ops to install its write handler. In an ideal world mce-inject would have its own character device, but we have a sizable legacy of test scripts that hardwire "/dev/mcelog", so it would be painful to switch to a separate device now. Instead, this patch switches to a stub function in the mce code, with a registration helper that mce-inject can call when it is loaded. Note that this would also allow for a sane process to allow mce-inject to be unloaded again (with an unregister function, and appropriate module_{get,put}() calls), but that is left for potential future patches. Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/4eb2e1971326651a3b@agluck-desktop.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-07Merge branch 'upstream/jump-label-noearly' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/jump-label-noearly' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: jump-label: initialize jump-label subsystem much earlier x86/jump_label: add arch_jump_label_transform_static() s390/jump-label: add arch_jump_label_transform_static() jump_label: add arch_jump_label_transform_static() to optimise non-live code updates sparc/jump_label: drop arch_jump_label_text_poke_early() x86/jump_label: drop arch_jump_label_text_poke_early() jump_label: if a key has already been initialized, don't nop it out stop_machine: make stop_machine safe and efficient to call early jump_label: use proper atomic_t initializer Conflicts: - arch/x86/kernel/jump_label.c Added __init_or_module to arch_jump_label_text_poke_early vs removal of that function entirely - kernel/stop_machine.c same patch ("stop_machine: make stop_machine safe and efficient to call early") merged twice, with whitespace fix in one version
2011-11-07Merge branch 'upstream/xen-settime' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/xen-settime' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/dom0: set wallclock time in Xen xen: add dom0_op hypercall xen/acpi: Domain0 acpi parser related platform hypercall
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-07Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scsi: drop unused Kconfig symbol pci: drop unused Kconfig symbol stmmac: drop unused Kconfig symbol x86: drop unused Kconfig symbol powerpc: drop unused Kconfig symbols powerpc: 40x: drop unused Kconfig symbol mips: drop unused Kconfig symbols openrisc: drop unused Kconfig symbols arm: at91: drop unused Kconfig symbol samples: drop unused Kconfig symbol m32r: drop unused Kconfig symbol score: drop unused Kconfig symbols sh: drop unused Kconfig symbol um: drop unused Kconfig symbol sparc: drop unused Kconfig symbol alpha: drop unused Kconfig symbol Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig as per Michal: the STMMAC_DUAL_MAC config variable is still unused and should be deleted.
2011-11-07Merge branch 'stable/vmalloc-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: net: xen-netback: use API provided by xenbus module to map rings block: xen-blkback: use API provided by xenbus module to map rings xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-06mrst pmu: update commentLen Brown
referenced MeeGo, in particular, but really means Linux, in general. Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-11-02Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (21 commits) MAINTAINERS: add an entry for Edac Sandy Bridge driver edac: tag sb_edac as EXPERIMENTAL, as it requires more testing EDAC: Fix incorrect edac mode reporting in sb_edac edac: sb_edac: Add it to the building system edac: Add an experimental new driver to support Sandy Bridge CPU's i7300_edac: Fix error cleanup logic i7core_edac: Initialize memory name with cpu, channel, bank i7core_edac: Fix compilation on 32 bits arch i7core_edac: scrubbing fixups EDAC: Correct Kconfig dependencies i7core_edac: return -ENODEV if no MC is found i7core_edac: use edac's own way to print errors MAINTAINERS: remove dropped edac_mce.* from the file i7core_edac: Drop the edac_mce facility x86, MCE: Use notifier chain only for MCE decoding EDAC i7core: Use mce socketid for better compatibility i7core_edac: Don't enable memory scrubbing for Xeon 35xx i7core_edac: Add scrubbing support edac: Move edac main structs to include/linux/edac.h i7core_edac: Fix oops when trying to inject errors ...
2011-11-02Merge branch 'akpm' (Andrew's incoming - part two)Linus Torvalds
Says Andrew: "60 patches. That's good enough for -rc1 I guess. I have quite a lot of detritus to be rechecked, work through maintainers, etc. - most of the remains of MM - rtc - various misc - cgroups - memcg - cpusets - procfs - ipc - rapidio - sysctl - pps - w1 - drivers/misc - aio" * akpm: (60 commits) memcg: replace ss->id_lock with a rwlock aio: allocate kiocbs in batches drivers/misc/vmw_balloon.c: fix typo in code comment drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop w1: disable irqs in critical section drivers/w1/w1_int.c: multiple masters used same init_name drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal drivers/power/ds2780_battery.c: add a nolock function to w1 interface drivers/power/ds2780_battery.c: create central point for calling w1 interface w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it pps gpio client: add missing dependency pps: new client driver using GPIO pps: default echo function include/linux/dma-mapping.h: add dma_zalloc_coherent() sysctl: make CONFIG_SYSCTL_SYSCALL default to n sysctl: add support for poll() RapidIO: documentation update drivers/net/rionet.c: fix ethernet address macros for LE platforms RapidIO: fix potential null deref in rio_setup_device() RapidIO: add mport driver for Tsi721 bridge ...
2011-11-02thp: share get_huge_page_tail()Andrea Arcangeli
This avoids duplicating the function in every arch gup_fast. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-10-12 00:12:34 (GMT)