summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-06-16Merge tag 'clk-for-linus-3.16-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
2014-06-14Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso fixes from Peter Anvin: "Fixes for x86/vdso. One is a simple build fix for bigendian hosts, one is to make "make vdso_install" work again, and the rest is about working around a bug in Google's Go language -- two are documentation patches that improves the sample code that the Go coders took, modified, and broke; the other two implements a workaround that keeps existing Go binaries from segfaulting at least" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso_install x86/vdso: Hack to keep 64-bit Go programs working x86/vdso: Add PUT_LE to store little-endian values x86/vdso/doc: Make vDSO examples more portable x86/vdso/doc: Rename vdso_test.c to vdso_standalone_test_x86.c x86, vdso: Remove one final use of htole16()
2014-06-13x86/vdso: Fix vdso_installAndy Lutomirski
"make vdso_install" installs unstripped versions of the vdso objects for the benefit of the debugger. This was broken by checkin: 6f121e548f83 x86, vdso: Reimplement vdso.so preparation in build-time C The filenames are different now, so update the Makefile to cope. This still installs the 64-bit vdso as vdso64.so. We believe this will be okay, as the only known user is a patched gdb which is known to use build-ids, but if it turns out to be a problem we may have to add a link. Inspired by a patch from Sam Ravnborg. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/b10299edd8ba98d17e07dafcd895b8ecf4d99eff.1402586707.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-06-13Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: "Kbuild changes for v3.16-rc1: - cross-compilation fix so that cc-option is testing the right compiler - Fix for make defconfig all - Using relative paths to the object and source directory where possible, plus fixes for the fallout of the change - several cleanups in the Makefiles and scripts The powerpc fix is from today, because it was only discovered recently. The rest has been in linux-next for some time" * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: powerpc: Avoid circular dependency with zImage.% kbuild: create include/config directory in scripts/kconfig/Makefile kbuild: do not create include/linux directory Makefile: Fix unrecognized cross-compiler command line options kbuild: do not add "selinux" to subdir- twice um: Fix for relative objtree when generating x86 headers kbuild: Use relative path when building in a subdir of the source tree kbuild: Use relative path when building in the source tree kbuild: Use relative path for $(objtree) firmware: Use $(quote) in the Makefile firmware: Simplify directory creation kbuild: trivial - fix comment block indent kbuild: trivial - remove trailing spaces kbuild: support simultaneous "make %config" and "make all" kbuild: move extra gcc checks to scripts/Makefile.extrawarn
2014-06-13Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are the remaining bits I was mentioning earlier. Mostly bug fixes and new selftests from Michael (yay !). He also removed the WSP platform and A2 core support which were dead before release, so less clutter. One little "feature" I snuck in is the doorbell IPI support for non-virtualized P8 which speeds up IPIs significantly between threads of a core" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/book3s: Fix some ABIv2 issues in machine check code powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest. powerpc/book3s: Increment the mce counter during machine_check_early call. powerpc/book3s: Add stack overflow check in machine check handler. powerpc/book3s: Fix machine check handling for unhandled errors powerpc/eeh: Dump PE location code powerpc/powernv: Enable POWER8 doorbell IPIs powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry powerpc/powernv: Fix killed EEH event powerpc: fix typo 'CONFIG_PMAC' powerpc: fix typo 'CONFIG_PPC_CPU' powerpc/powernv: Don't escalate non-existing frozen PE powerpc/eeh: Report frozen parent PE prior to child PE powerpc/eeh: Clear frozen state for child PE powerpc/powernv: Reduce panic timeout from 180s to 10s powerpc/xmon: avoid format string leaking to printk selftests/powerpc: Add tests of PMU EBBs selftests/powerpc: Add support for skipping tests selftests/powerpc: Put the test in a separate process group selftests/powerpc: Fix instruction loop for ABIv2 (LE) ...
2014-06-13Merge tag 'blackfin-for-linus' of ↵Linus Torvalds
http://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao. * tag 'blackfin-for-linus' of http://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: defconfigs: add MTD_SPI_NOR (new dependency for M25P80) Revert "blackfin: dma: current count mmr is read only" bf533: fix build error: add linux/gpio.h
2014-06-13Merge branch 'x86-irq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq fixes from Ingo Molnar: "Two changes: a cpu-hotplug/irq race fix, plus a HyperV related fix" * 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Fix fixup_irqs() error handling x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately
2014-06-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more scheduler updates from Ingo Molnar: "Second round of scheduler changes: - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski - continued power scheduling cleanups and refactorings, from Nicolas Pitre - misc fixes and enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Delete extraneous extern for to_ratio() sched/idle: Optimize try-to-wake-up IPI sched/idle: Simplify wake_up_idle_cpu() sched/idle: Clear polling before descheduling the idle thread sched, trace: Add a tracepoint for IPI-less remote wakeups cpuidle: Set polling in poll_idle sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...) sched: Rename capacity related flags sched: Final power vs. capacity cleanups sched: Remove remaining dubious usage of "power" sched: Let 'struct sched_group_power' care about CPU capacity sched/fair: Disambiguate existing/remaining "capacity" usage sched/fair: Change "has_capacity" to "has_free_capacity" sched/fair: Remove "power" from 'struct numa_stats' sched: Fix signedness bug in yield_to() sched/fair: Use time_after() in record_wakee() sched/balancing: Reduce the rate of needless idle load balancing sched/fair: Fix unlocked reads of some cfs_b->quota/period
2014-06-13Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Ingo Molnar: "A second round of perf updates: - wide reaching kprobes sanitization and robustization, with the hope of fixing all 'probe this function crashes the kernel' bugs, by Masami Hiramatsu. - uprobes updates from Oleg Nesterov: tmpfs support, corner case fixes and robustization work. - perf tooling updates and fixes from Jiri Olsa, Namhyung Ki, Arnaldo et al: * Add support to accumulate hist periods (Namhyung Kim) * various fixes, refactorings and enhancements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits) perf: Differentiate exec() and non-exec() comm events perf: Fix perf_event_comm() vs. exec() assumption uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates perf/documentation: Add description for conditional branch filter perf/x86: Add conditional branch filtering support perf/tool: Add conditional branch filter 'cond' to perf record perf: Add new conditional branch filter 'PERF_SAMPLE_BRANCH_COND' uprobes: Teach copy_insn() to support tmpfs uprobes: Shift ->readpage check from __copy_insn() to uprobe_register() perf/x86: Use common PMU interrupt disabled code perf/ARM: Use common PMU interrupt disabled code perf: Disable sampled events if no PMU interrupt perf: Fix use after free in perf_remove_from_context() perf tools: Fix 'make help' message error perf record: Fix poll return value propagation perf tools: Move elide bool into perf_hpp_fmt struct perf tools: Remove elide setup for SORT_MODE__MEMORY mode perf tools: Fix "==" into "=" in ui_browser__warning assignment perf tools: Allow overriding sysfs and proc finding with env var perf tools: Consider header files outside perf directory in tags target ...
2014-06-13x86/vdso: Hack to keep 64-bit Go programs workingAndy Lutomirski
The Go runtime has a buggy vDSO parser that currently segfaults. This writes an empty SHT_DYNSYM entry that causes Go's runtime to malfunction by thinking that the vDSO is empty rather than malfunctioning by running off the end and segfaulting. This affects x86-64 only as far as we know, so we do not need this for the i386 and x32 vdsos. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/d10618176c4bd39b457a5e85c497295c90cab1bc.1402620737.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-06-13x86/vdso: Add PUT_LE to store little-endian valuesAndy Lutomirski
Add PUT_LE() by analogy with GET_LE() to write littleendian values in addition to reading them. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/3d9b27e92745b27b6fda1b9a98f70dc9c1246c7a.1402620737.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-06-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more locking changes from Ingo Molnar: "This is the second round of locking tree updates for v3.16, offering large system scalability improvements: - optimistic spinning for rwsems, from Davidlohr Bueso. - 'qrwlocks' core code and x86 enablement, from Waiman Long and PeterZ" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, locking/rwlocks: Enable qrwlocks on x86 locking/rwlocks: Introduce 'qrwlocks' - fair, queued rwlocks locking/mutexes: Documentation update/rewrite locking/rwsem: Fix checkpatch.pl warnings locking/rwsem: Fix warnings for CONFIG_RWSEM_GENERIC_SPINLOCK locking/rwsem: Support optimistic spinning
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm merge window pull request, changes all over the place, mostly normal levels of churn. Highlights: Core drm: More cleanups, fix race on connector/encoder naming, docs updates, object locking rework in prep for atomic modeset i915: mipi DSI support, valleyview power fixes, cursor size fixes, execlist refactoring, vblank improvements, userptr support, OOM handling improvements radeon: GPUVM tuning and large page size support, gart fixes, deep color HDMI support, HDMI audio cleanups nouveau: - displayport rework should fix lots of issues - initial gk20a support - gk110b support - gk208 fixes exynos: probe order fixes, HDMI changes, IPP consolidation msm: debugfs updates, misc fixes ast: ast2400 support, sync with UMS driver tegra: cleanups, hdmi + hw cursor for Tegra 124. panel: fixes existing panels add some new ones. ipuv3: moved from staging to drivers/gpu" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits) drm/nouveau/disp/dp: fix tmds passthrough on dp connector drm/nouveau/dp: probe dpcd to determine connectedness drm/nv50-: trigger update after all connectors disabled drm/nv50-: prepare for attaching a SOR to multiple heads drm/gf119-/disp: fix debug output on update failure drm/nouveau/disp/dp: make use of postcursor when its available drm/g94-/disp/dp: take max pullup value across all lanes drm/nouveau/bios/dp: parse lane postcursor data drm/nouveau/dp: fix support for dpms drm/nouveau: register a drm_dp_aux channel for each dp connector drm/g94-/disp: add method to power-off dp lanes drm/nouveau/disp/dp: maintain link in response to hpd signal drm/g94-/disp: bash and wait for something after changing lane power regs drm/nouveau/disp/dp: split link config/power into two steps drm/nv50/disp: train PIOR-attached DP from second supervisor drm/nouveau/disp/dp: make use of existing output data for link training drm/gf119/disp: start removing direct vbios parsing from supervisor drm/nv50/disp: start removing direct vbios parsing from supervisor drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal drm/nouveau/disp/dp: create subclass for dp outputs ...
2014-06-12Merge commit '3cf2f34' into sched/core, to fix build errorIngo Molnar
Fix this dependency on the locking tree's smp_mb*() API changes: kernel/sched/idle.c:247:3: error: implicit declaration of function ‘smp_mb__after_atomic’ [-Werror=implicit-function-declaration] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-12blackfin: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)Brian Norris
These defconfigs contain the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to the relevant defconfigs. At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Steven Miao <realmz6@gmail.com> Cc: adi-buildroot-devel@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org
2014-06-12powerpc: Avoid circular dependency with zImage.%Michal Marek
The rule to create the final images uses a zImage.% pattern. Unfortunately, this also matches the names of the zImage.*.lds linker scripts, which appear as a dependency of the final images. This somehow worked when $(srctree) used to be an absolute path, but now the pattern matches too much. List only the images from $(image-y) as the target of the rule, to avoid the circular dependency. Reported-and-tested-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull arch/tile changes from Chris Metcalf: "These mostly just address smaller issues reported to me" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO replace strict_strto* call with kstrto* tile: Update comments for generic idle conversion tile: cleanup the comment in init_pgprot tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
2014-06-11powerpc/book3s: Fix some ABIv2 issues in machine check codeAnton Blanchard
Commit 2749a2f26a7c (powerpc/book3s: Fix machine check handling for unhandled errors) introduced a few ABIv2 issues. We can maintain ABIv1 and ABIv2 compatibility by branching to the function rather than the dot symbol. Fixes: 2749a2f26a7c ("powerpc/book3s: Fix machine check handling for unhandled errors") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge tag 'pwm/for-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The majority of these changes are cleanups and fixes across all drivers. Redundant error messages are removed and more PWM controllers set the .can_sleep flag to signal that they can't be used in atomic context. Support is added for the Broadcom Kona family of SoCs and the Intel LPSS driver can now probe PCI devices in addition to ACPI devices. Upon shutdown, the pwm-backlight driver will now power off the backlight. It also uses the new descriptor-based GPIO API for more concise GPIO handling. A large chunk of these changes also converts platforms to use the lookup mechanism rather than relying on the global number space to reference PWM devices. This is largely in preparation for more unification and cleanups in future patches. Eventually it will allow the legacy PWM API to be removed" * tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits) pwm: fsl-ftm: set pwm_chip can_sleep flag pwm: ab8500: Fix wrong value shift for disable/enable PWM pwm: samsung: do not set manual update bit in pwm_samsung_config pwm: lp3943: Set pwm_chip can_sleep flag pwm: atmel: set pwm_chip can_sleep flag pwm: mxs: set pwm_chip can_sleep flag pwm: tiehrpwm: inline accessor functions pwm: tiehrpwm: don't build PM related functions when not needed pwm-backlight: retrieve configured PWM period leds: leds-pwm: retrieve configured PWM period ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members ARM: pxa: hx4700: initialize all the struct pwm_lookup members ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data ARM: shmobile: armadillo: initialize all struct pwm_lookup members pwm: add period and polarity to struct pwm_lookup pwm: twl: Really disable twl6030 PWMs ...
2014-06-11Merge tag 'soc2-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull part two of ARM SoC updates from Arnd Bergmann: "This is a small follow-up to the larger ARM SoC updates merged last week, almost entirely for the keystone platform. The main change here is to use the new dma-ranges parsing code that came in through Russell's ARM tree. This allows the keystone platform to do cache-coherent DMA and to finally support all the available physical memory when LPAE is enabled. Aside from this, the keystone reset driver has been rewritten, and there is a small bug fix to allow building the orion5x platform again" * tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: Drop use of meminfo since its not available anymore ARM: orion5x: fix mvebu_mbus_dt_init call ARM: configs: keystone: enable reset driver support ARM: dts: keystone: update reset node to work with reset driver ARM: keystone: remove redundant reset stuff ARM: keystone: Update the dma offset for non-dt platform devices ARM: keystone: Switch over to coherent memory address space ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80) ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG
2014-06-11Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
2014-06-11powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest.Mahesh Salgaonkar
Currently we forward MCEs to guest which have been recovered by guest. And for unhandled errors we do not deliver the MCE to guest. It looks like with no support of FWNMI in qemu, guest just panics whenever we deliver the recovered MCEs to guest. Also, the existig code used to return to host for unhandled errors which was casuing guest to hang with soft lockups inside guest and makes it difficult to recover guest instance. This patch now forwards all fatal MCEs to guest causing guest to crash/panic. And, for recovered errors we just go back to normal functioning of guest instead of returning to host. This fixes soft lockup issues in guest. This patch also fixes an issue where guest MCE events were not logged to host console. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/book3s: Increment the mce counter during machine_check_early call.Mahesh Salgaonkar
We don't see MCE counter getting increased in /proc/interrupts which gives false impression of no MCE occurred even when there were MCE events. The machine check early handling was added for PowerKVM and we missed to increment the MCE count in the early handler. We also increment mce counters in the machine_check_exception call, but in most cases where we handle the error hypervisor never reaches there unless its fatal and we want to crash. Only during fatal situation we may see double increment of mce count. We need to fix that. But for now it always good to have some count increased instead of zero. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/book3s: Add stack overflow check in machine check handler.Mahesh Salgaonkar
Currently machine check handler does not check for stack overflow for nested machine check. If we hit another MCE while inside the machine check handler repeatedly from same address then we get into risk of stack overflow which can cause huge memory corruption. This patch limits the nested MCE level to 4 and panic when we cross level 4. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/book3s: Fix machine check handling for unhandled errorsMahesh Salgaonkar
Current code does not check for unhandled/unrecovered errors and return from interrupt if it is recoverable exception which in-turn triggers same machine check exception in a loop causing hypervisor to be unresponsive. This patch fixes this situation and forces hypervisor to panic for unhandled/unrecovered errors. This patch also fixes another issue where unrecoverable_exception routine was called in real mode in case of unrecoverable exception (MSR_RI = 0). This causes another exception vector 0x300 (data access) during system crash leading to confusion while debugging cause of the system crash. Also turn ME bit off while going down, so that when another MCE is hit during panic path, system will checkstop and hypervisor will get restarted cleanly by SP. With the above fixes we now throw correct console messages (see below) while crashing the system in case of unhandled/unrecoverable machine checks. -------------- Severe Machine check interrupt [[Not recovered] Initiator: CPU Error type: UE [Instruction fetch] Effective address: 0000000030002864 Oops: Machine check, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: bork(O) bridge stp llc kvm [last unloaded: bork] CPU: 36 PID: 55162 Comm: bash Tainted: G O 3.14.0mce #1 task: c000002d72d022d0 ti: c000000007ec0000 task.ti: c000002d72de4000 NIP: 0000000030002864 LR: 00000000300151a4 CTR: 000000003001518c REGS: c000000007ec3d80 TRAP: 0200 Tainted: G O (3.14.0mce) MSR: 9000000000041002 <SF,HV,ME,RI> CR: 28222848 XER: 20000000 CFAR: 0000000030002838 DAR: d0000000004d0000 DSISR: 00000000 SOFTE: 1 GPR00: 000000003001512c 0000000031f92cb0 0000000030078af0 0000000030002864 GPR04: d0000000004d0000 0000000000000000 0000000030002864 ffffffffffffffc9 GPR08: 0000000000000024 0000000030008af0 000000000000002c c00000000150e728 GPR12: 9000000000041002 0000000031f90000 0000000010142550 0000000040000000 GPR16: 0000000010143cdc 0000000000000000 00000000101306fc 00000000101424dc GPR20: 00000000101424e0 000000001013c6f0 0000000000000000 0000000000000000 GPR24: 0000000010143ce0 00000000100f6440 c000002d72de7e00 c000002d72860250 GPR28: c000002d72860240 c000002d72ac0038 0000000000000008 0000000000040000 NIP [0000000030002864] 0x30002864 LR [00000000300151a4] 0x300151a4 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 7285f0beac1e29d3 ]--- Sending IPI to other CPUs IPI complete OPAL V3 detected ! -------------- Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/eeh: Dump PE location codeGavin Shan
As Ben suggested, it's meaningful to dump PE's location code for site engineers when hitting EEH errors. The patch introduces function eeh_pe_loc_get() to retireve the location code from dev-tree so that we can output it when hitting EEH errors. If primary PE bus is root bus, the PHB's dev-node would be tried prior to root port's dev-node. Otherwise, the upstream bridge's dev-node of the primary PE bus will be check for the location code directly. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11net: filter: cleanup A/X name usageAlexei Starovoitov
The macro 'A' used in internal BPF interpreter: #define A regs[insn->a_reg] was easily confused with the name of classic BPF register 'A', since 'A' would mean two different things depending on context. This patch is trying to clean up the naming and clarify its usage in the following way: - A and X are names of two classic BPF registers - BPF_REG_A denotes internal BPF register R0 used to map classic register A in internal BPF programs generated from classic - BPF_REG_X denotes internal BPF register R7 used to map classic register X in internal BPF programs generated from classic - internal BPF instruction format: struct sock_filter_int { __u8 code; /* opcode */ __u8 dst_reg:4; /* dest register */ __u8 src_reg:4; /* source register */ __s16 off; /* signed offset */ __s32 imm; /* signed immediate constant */ }; - BPF_X/BPF_K is 1 bit used to encode source operand of instruction In classic: BPF_X - means use register X as source operand BPF_K - means use 32-bit immediate as source operand In internal: BPF_X - means use 'src_reg' register as source operand BPF_K - means use 32-bit immediate as source operand Suggested-by: Chema Gonzalez <chema@google.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Chema Gonzalez <chema@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11powerpc/powernv: Enable POWER8 doorbell IPIsMichael Neuling
This patch enables POWER8 doorbell IPIs on powernv. Since doorbells can only IPI within a core, we test to see when we can use doorbells and if not we fall back to XICS. This also enables hypervisor doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit. Based on tests by Anton, the best case IPI latency between two threads dropped from 894ns to 512ns. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv: Fix killed EEH eventGavin Shan
On PowerNV platform, EEH errors are reported by IO accessors or poller driven by interrupt. After the PE is isolated, we won't produce EEH event for the PE. The current implementation has possibility of EEH event lost in this way: The interrupt handler queues one "special" event, which drives the poller. EEH thread doesn't pick the special event yet. IO accessors kicks in, the frozen PE is marked as "isolated" and EEH event is queued to the list. EEH thread runs because of special event and purge all existing EEH events. However, we never produce an other EEH event for the frozen PE. Eventually, the PE is marked as "isolated" and we don't have EEH event to recover it. The patch fixes the issue to keep EEH events for PEs that have been marked as "isolated" with the help of additional "force" help to eeh_remove_event(). Reported-by: Rolf Brudeseth <rolfb@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc: fix typo 'CONFIG_PMAC'Paul Bolle
Commit b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") added a check for CONFIG_PMAC were a check for CONFIG_PPC_PMAC was clearly intended. Fixes: b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc: fix typo 'CONFIG_PPC_CPU'Paul Bolle
Commit cd64d1697cf0 ("powerpc: mtmsrd not defined") added a check for CONFIG_PPC_CPU were a check for CONFIG_PPC_FPU was clearly intended. Fixes: cd64d1697cf0 ("powerpc: mtmsrd not defined") Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv: Don't escalate non-existing frozen PEGavin Shan
Commit cb5b242c ("powerpc/eeh: Escalate error on non-existing PE") escalates the frozen state on non-existing PE to fenced PHB. It was to improve kdump reliability. After that, commit 361f2a2a ("powrpc/powernv: Reset PHB in kdump kernel") was introduced to issue complete reset on all PHBs to increase the reliability of kdump kernel. Commit cb5b242c becomes unuseful and it would be reverted. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/eeh: Report frozen parent PE prior to child PEGavin Shan
When we have the corner case of frozen parent and child PE at the same time, we have to handle the frozen parent PE prior to the child. Without clearning the frozen state on parent PE, the child PE can't be recovered successfully. The patch searches the EEH PE hierarchy tree and returns the toppest frozen PE to be handled. It ensures the frozen parent PE will be handled prior to child PE. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/eeh: Clear frozen state for child PEGavin Shan
Since commit cb523e09 ("powerpc/eeh: Avoid I/O access during PE reset"), the PE is kept as frozen state on hardware level until the PE reset is done completely. After that, we explicitly clear the frozen state of the affected PE. However, there might have frozen child PEs of the affected PE and we also need clear their frozen state as well. Otherwise, the recovery is going to fail. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv: Reduce panic timeout from 180s to 10sAnton Blanchard
We've already dropped the default pseries timeout to 10s, do the same for powernv. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/xmon: avoid format string leaking to printkKees Cook
This makes sure format strings cannot leak into printk (the string has already been correctly processed for format arguments). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/perf: Ensure all EBB register state is cleared on fork()Michael Ellerman
In commit 330a1eb "Core EBB support for 64-bit book3s" I messed up clear_task_ebb(). It clears some but not all of the task's Event Based Branch (EBB) registers when we duplicate a task struct. That allows a child task to observe the EBBHR & EBBRR of its parent, which it should not be able to do. Fix it by clearing EBBHR & EBBRR. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: stable@vger.kernel.org [v3.11+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv: Fix reading of OPAL msglogJoel Stanley
memory_return_from_buffer returns a signed value, so ret should be ssize_t. Fixes the following issue reported by David Binderman: [linux-3.15/arch/powerpc/platforms/powernv/opal-msglog.c:65]: (style) Checking if unsigned variable 'ret' is less than zero. [linux-3.15/arch/powerpc/platforms/powernv/opal-msglog.c:82]: (style) Checking if unsigned variable 'ret' is less than zero. Local variable "ret" is of type size_t. This is always unsigned, so it is pointless to check if it is less than zero. https://bugzilla.kernel.org/show_bug.cgi?id=77551 Fixing this exposes a real bug for the case where the entire count bytes is successfully read from the POS_WRAP case. The second memory_read_from_buffer will return EINVAL, causing the entire read to return EINVAL to userspace, despite the data being copied correctly. The fix is to test for the case where the data has been read and return early. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/spufs: Remove duplicate SPUFS_CNTL_MAP_SIZE defineDan Carpenter
The SPUFS_CNTL_MAP_SIZE define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/cpm: Remove duplicate FCC_GFMR_TTX defineDan Carpenter
The FCC_GFMR_TTX define is cut and pasted twice so we can remove the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv: Fix endianness problems in EEHGuo Chao
EEH information fetched from OPAL need fix before using in LE environment. To be included in sparse's endian check, declare them as __beXX and access them by accessors. Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powernv: Fix permissions on sysparam sysfs entriesAnton Blanchard
Everyone can write to these files, which is not what we want. Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv : Disable subcore for UP configsShreyas B. Prabhu
Build throws following errors when CONFIG_SMP=n arch/powerpc/platforms/powernv/subcore.c: In function ‘cpu_update_split_mode’: arch/powerpc/platforms/powernv/subcore.c:274:15: error: ‘setup_max_cpus’ undeclared (first use in this function) arch/powerpc/platforms/powernv/subcore.c:285:5: error: lvalue required as left operand of assignment 'setup_max_cpus' variable is relevant only on SMP, so there is no point working around it for UP. Furthermore, subcore itself is relevant only on SMP and hence the better solution is to exclude subcore.o and subcore-asm.o for UP builds. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/powernv: Include asm/smp.h to fix UP build failureShreyas B. Prabhu
Build throws following errors when CONFIG_SMP=n arch/powerpc/platforms/powernv/setup.c: In function ‘pnv_kexec_wait_secondaries_down’: arch/powerpc/platforms/powernv/setup.c:179:4: error: implicit declaration of function ‘get_hard_smp_processor_id’ rc = opal_query_cpu_status(get_hard_smp_processor_id(i), The usage of get_hard_smp_processor_id() needs the declaration from <asm/smp.h>. The file setup.c includes <linux/sched.h>, which in-turn includes <linux/smp.h>. However, <linux/smp.h> includes <asm/smp.h> only on SMP configs and hence UP builds fail. Fix this by directly including <asm/smp.h> in setup.c unconditionally. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc: Don't setup CPUs with bad statusMichael Neuling
OPAL will mark a CPU that is guarded as "bad" in the status property of the CPU node. Unfortunatley Linux doesn't check this property and will put the bad CPU in the present map. This has caused hangs on booting when we try to unsplit the core. This patch checks the CPU is avaliable via this status property before putting it in the present map. Signed-off-by: Michael Neuling <mikey@neuling.org> Tested-by: Anton Blanchard <anton@samba.org> cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc: Correct DSCR during TM context switchSam bobroff
Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> CC: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc: Remove platforms/wsp and associated piecesMichael Ellerman
__attribute__ ((unused)) WSP is the last user of CONFIG_PPC_A2, so we remove that as well. Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for any Book3E platform, so we can remove the code in mmu-book3e.h that depended on it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc: Remove check for CONFIG_SERIAL_TEXT_DEBUGPaul Bolle
The Kconfig symbol SERIAL_TEXT_DEBUG was removed from arch/powerpc/Kconfig.debug in v2.6.22. (In v2.6.27 it was also removed from arch/ppc/Kconfig.debug.) So the check for its macro has evaluated to false for over five years now. Remove that check and the few lines of code hidden behind it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>