summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-02-15Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix text_poke_smp_batch() deadlock perf tools: Fix thread_map event synthesizing in top and record watchdog, nmi: Lower the severity of error messages ARM: oprofile: Fix backtraces in timer mode oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends
2011-02-15Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, dmi, debug: Log board name (when present) in dmesg/oops output x86, ioapic: Don't warn about non-existing IOAPICs if we have none x86: Fix mwait_usable section mismatch x86: Readd missing irq_to_desc() in fixup_irq() x86: Fix section mismatch in LAPIC initialization
2011-02-15s390: remove task_show_regsMartin Schwidefsky
task_show_regs used to be a debugging aid in the early bringup days of Linux on s390. /proc/<pid>/status is a world readable file, it is not a good idea to show the registers of a process. The only correct fix is to remove task_show_regs. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-15x86, dmi, debug: Log board name (when present) in dmesg/oops outputNaga Chumbalkar
The "Type 2" SMBIOS record that contains Board Name is not strictly required and may be absent in the SMBIOS on some platforms. ( Please note that Type 2 is not listed in Table 3 in Sec 6.2 ("Required Structures and Data") of the SMBIOS v2.7 Specification. ) Use the Manufacturer Name (aka System Vendor) name. Print Board Name only when it is present. Before the fix: (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6 After the fix: (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6 Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: <stable@kernel.org> # .3x - good for debugging, please apply as far back as it applies cleanly LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-15x86, ioapic: Don't warn about non-existing IOAPICs if we have nonePaul Bolle
mp_find_ioapic() prints errors like: ERROR: Unable to locate IOAPIC for GSI 13 if it can't find the IOAPIC that manages that specific GSI. I see errors like that at every boot of a laptop that apparently doesn't have any IOAPICs. But if there are no IOAPICs it doesn't seem to be an error that none can be found. A solution that gets rid of this message is to directly return if nr_ioapics (still) is zero. (But keep returning -1 in that case, so nothing breaks from this change.) The call chain that generates this error is: pnpacpi_allocated_resource() case ACPI_RESOURCE_TYPE_IRQ: pnpacpi_parse_allocated_irqresource() acpi_get_override_irq() mp_find_ioapic() Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-15Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-02-14Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR ARM: 6658/1: collie: do actually pass locomo_info to locomo driver ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL ARM: 6654/1: perf/oprofile: fix off-by-one in stack check ARM: fixup SMP alternatives in modules ARM: make SWP emulation explicit on !CPU_USE_DOMAINS ARM: Avoid building unsafe kernels on OMAP2 and MX3 ARM: pxa: Properly configure PWM period for palm27x ARM: pxa: only save/restore registers when pm functions are defined ARM: pxa/colibri: use correct SD detect pin ARM: pxa: fix mfpr_sync to read from valid offset
2011-02-14x86: Fix mwait_usable section mismatchBorislav Petkov
We use it in non __cpuinit code now too so drop marker. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20110211171754.GA21047@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-12x86: Readd missing irq_to_desc() in fixup_irq()Thomas Gleixner
commit a3c08e5d(x86: Convert irq_chip access to new functions) accidentally zapped desc = irq_to_desc(irq); in the vector loop. So we lock some random irq descriptor. Add it back. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> # .37
2011-02-12x86: Fix text_poke_smp_batch() deadlockPeter Zijlstra
Fix this deadlock - we are already holding the mutex: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc4-test+ #1 ------------------------------------------------------- bash/1850 is trying to acquire lock: (text_mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f but task is already holding lock: (smp_alt){+.+...}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (smp_alt){+.+...}: [<ffffffff81082d02>] lock_acquire+0xcd/0xf8 [<ffffffff8192e119>] __mutex_lock_common+0x4c/0x339 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43 [<ffffffff8101050f>] alternatives_smp_switch+0x77/0x1d8 [<ffffffff81926a6f>] do_boot_cpu+0xd7/0x762 [<ffffffff819277dd>] native_cpu_up+0xe6/0x16a [<ffffffff81928e28>] _cpu_up+0x9d/0xee [<ffffffff81928f4c>] cpu_up+0xd3/0xe7 [<ffffffff82268d4b>] kernel_init+0xe8/0x20a [<ffffffff8100ba24>] kernel_thread_helper+0x4/0x10 -> #1 (cpu_hotplug.lock){+.+.+.}: [<ffffffff81082d02>] lock_acquire+0xcd/0xf8 [<ffffffff8192e119>] __mutex_lock_common+0x4c/0x339 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43 [<ffffffff810568cc>] get_online_cpus+0x41/0x55 [<ffffffff810a1348>] stop_machine+0x1e/0x3e [<ffffffff819314c1>] text_poke_smp_batch+0x3a/0x3c [<ffffffff81932b6c>] arch_optimize_kprobes+0x10d/0x11c [<ffffffff81933a51>] kprobe_optimizer+0x152/0x222 [<ffffffff8106bb71>] process_one_work+0x1d3/0x335 [<ffffffff8106cfae>] worker_thread+0x104/0x1a4 [<ffffffff810707c4>] kthread+0x9d/0xa5 [<ffffffff8100ba24>] kernel_thread_helper+0x4/0x10 -> #0 (text_mutex){+.+.+.}: other info that might help us debug this: 6 locks held by bash/1850: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #1: (s_active#75){.+.+.+}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #2: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #3: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #4: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #5: (smp_alt){+.+...}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f stack backtrace: Pid: 1850, comm: bash Not tainted 2.6.38-rc4-test+ #1 Call Trace: [<ffffffff81080eb2>] print_circular_bug+0xa8/0xb7 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43 [<ffffffff81010302>] alternatives_smp_unlock+0x3d/0x93 [<ffffffff81010630>] alternatives_smp_switch+0x198/0x1d8 [<ffffffff8102568a>] native_cpu_die+0x65/0x95 [<ffffffff818cc4ec>] _cpu_down+0x13e/0x202 [<ffffffff8117a619>] sysfs_write_file+0x108/0x144 [<ffffffff8111f5a2>] vfs_write+0xac/0xff [<ffffffff8111f7a9>] sys_write+0x4a/0x6e Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: mathieu.desnoyers@efficios.com Cc: rusty@rustcorp.com.au Cc: ananth@in.ibm.com Cc: masami.hiramatsu.pt@hitachi.com Cc: fweisbec@gmail.com Cc: jbeulich@novell.com Cc: jbaron@redhat.com Cc: mhiramat@redhat.com LKML-Reference: <1297458466.5226.93.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-12Merge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index
2011-02-12Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h ARM: S5PV310: Cleanup System MMU ARM: S5PV310: Add support System MMU on SMDKV310
2011-02-12Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix msr instruction detection microblaze: Fix pte_update function microblaze: Fix asm compilation warning microblaze: Fix IRQ flag handling for MSR=0
2011-02-11Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-02-11ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported ↵Will Deacon
arch The ptrace debug information register was advertising breakpoint and watchpoint resources for unsupported debug architectures. This meant that setting breakpoints on these architectures would appear to succeed, although they would never fire in reality. This patch fixes the breakpoint slot probing so that it returns 0 when running on an unsupported debug architecture. Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCRWill Deacon
Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock is set leads to UNPREDICTABLE behaviour. This patch ensures that we clear the OS lock before accessing anything other than the DBGDIDR, thereby avoiding this behaviour. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6658/1: collie: do actually pass locomo_info to locomo driverDmitry Eremin-Solenikov
locomo_info isn't actually used as a platform_data on collie platform: arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNELDave Martin
rmk says: "You might as well make OABI_COMPAT depend on !THUMB2_KERNEL. OABI userland is useless without FPA support." nwfpe doesn't work with Thumb-2 anyway and will probably never get ported, so I can't argue with that. This patch implements the dependency change. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.hMark Brown
Previously we were relying on it being pulled in by other headers for the prototype of s3c24xx_irq_suspend() and s3c24xx_irq_resume(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-11ARM: S5PV310: Cleanup System MMUKukjin Kim
This patch cleans following up. - Moved definition of System MMU IPNUM into mach/sysmmu.h - Removed useless SYSMMU_DEBUG configuration - Removed useless header file plat/sysmmu.h Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-11ARM: S5PV310: Add support System MMU on SMDKV310Thomas Abraham
The 's5pv310_device_sysmmu' is used on SMDKV310. But since it is not compiled now, there is a build error. To fix this compilation error, S5PV310_DEV_SYSMMU needs to be selected for SMDKV310 board. This patch enables System MMU support on SMDKV310. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [kgene.kim@samsung.com: Adding description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-10Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock 68360serial: Plumb in rs_360_get_icount() n_gsm: copy mtu over when configuring via ioctl interface virtio: console: Move file back to drivers/char/
2011-02-10ARM: 6654/1: perf/oprofile: fix off-by-one in stack checkRabin Vincent
Since tail is the previous fp - 1, we need to compare the new fp with tail + 1 to ensure that we don't end up passing in the same tail again, in order to avoid a potential infinite loop in the perf interrupt handler (which has been observed to occur). A similar fix seems to be needed in the OProfile code. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-10ARM: fixup SMP alternatives in modulesRussell King
With certain configurations, we inline the unlock functions in modules, which results in SMP alternatives being created in modules. We need to fix those up when loading a module to prevent undefined instruction faults. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-10ARM: make SWP emulation explicit on !CPU_USE_DOMAINSRussell King
SWP emulation requires that CPU domain support is disabled in order to work safely. Make that explicit in the kernel configuration to prevent illegal configurations being generated. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-10x86: Fix section mismatch in LAPIC initializationJan Beulich
Additionally doing things conditionally upon smp_processor_id() being zero is generally a bad idea, as this means CPU 0 cannot be offlined and brought back online later again. While there may be other places where this is done, I think adding more of those should be avoided so that some day SMP can really become "symmetrical". Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> LKML-Reference: <4D525C7E0200007800030EE1@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-09ARM: Avoid building unsafe kernels on OMAP2 and MX3Russell King
OMAP2 (armv6) and MX3 turn off support for the V6K instructions, which when they include support for SMP kernels means that the resulting kernel is unsafe on SMP and can result in corrupted filesystems as we end up using unsafe bitops. Re-enable the use of V6K instructions on such kernels, and let such kernels running on V6 CPUs eat undefined instruction faults which will be much safer than filesystem corruption. Next merge window we can fix this properly (as it requires a much bigger set of changes.) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-09KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_indexJoerg Roedel
The gs_index loading code uses the swapgs instruction to switch to the user gs_base temporarily. This is unsave in an lightweight exit-path in KVM on AMD because the KERNEL_GS_BASE MSR is switches lazily. An NMI happening in the critical path of load_gs_index may use the wrong GS_BASE value then leading to unpredictable behavior, e.g. a triple-fault. This patch fixes the issue by making sure that load_gs_index is called only with a valid KERNEL_GS_BASE value loaded in KVM. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-02-09ARM: pxa: Properly configure PWM period for palm27xMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-09ARM: pxa: only save/restore registers when pm functions are definedEric Miao
Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-09ARM: pxa/colibri: use correct SD detect pinBjørn Forsman
The use of wrong SD detect pin was introduced by this commit: ARM: pxa: Push Colibri evalboard MFP into module files This fixes it. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-09ARM: pxa: fix mfpr_sync to read from valid offsetYu Tang
Since mfpr_mmio_base[0] is not always valid on later SoCs, fixed mpfr_sync() to read back from valid mfp offset always. Signed-off-by: Yu Tang <ytang5@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-02-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ALSA: AACI: allow writes to MAINCR to take effect ARM: Update mach-types ARM: 6652/1: ep93xx: correct the end address of the AC97 memory resource ARM: mxs/imx28: remove now unused clock lookup "fec.0" ARM: mxs: fix clock base address missing ARM: mxs: acknowledge gpio irq ARM: mach-imx/mach-mx25_3ds: Fix section type ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h ARM i.MX23: use correct register for setting the rate ARM i.MX23/28: remove secondary field from struct clk. It's unused ARM i.MX28: use correct register for setting the rate ARM i.MX28: fix bit operation
2011-02-07Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix hcall tracepoint recursion powerpc/numa: Fix bug in unmap_cpu_from_node powerpc/numa: Disable VPHN on dedicated processor partitions powerpc/numa: Add length when creating OF properties via VPHN powerpc/numa: Check for all VPHN changes powerpc/numa: Only use active VPHN count fields powerpc/pseries: Remove unnecessary variable initializations in numa.c powerpc/pseries: Fix brace placement in numa.c powerpc/pseries: Fix typo in VPHN comments powerpc: Fix some 6xx/7xxx CPU setup functions powerpc: Pass the right cpu_spec to ->setup_cpu() on 64-bit powerpc/book3e: Protect complex macro args in mmu-book3e.h powerpc: Fix pfn_valid() when memory starts at a non-zero address
2011-02-07Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arm: omap4: panda: remove usb_nop_xceiv_register(v1) OMAP1: Fix non-working LCD on OMAP310 OMAP3: Devkit8000: Change lcd power pin omap1: remove duplicated #include arm: mach-omap2: mux: free allocated memory on error exit arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints OMAP: PM: SmartReflex: Fix possible null pointer read access OMAP: PM: SmartReflex: Fix possible memory leak arm: mach-omap2: voltage: debugfs: fix memory leak OMAP3: PM: fix save secure RAM to restore MPU power state OMAP: PM: SmartReflex: Add missing IS_ERR test
2011-02-07Merge branch 'fixes'Russell King
2011-02-07microblaze: Fix msr instruction detectionMichal Simek
Fix msr instructions detection. The current code just use msrclr for loading msr content and compare it with proper MSR content. If msrclr is not implemented r8 contains pc address. Previous code wanted to use MSR carry bit but if msrclr wasn't implemented carry wasn't cleared. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-07microblaze: Fix pte_update functionMichal Simek
Do not disable irq in asm but use irq macros. Systems with MSR=0 couldn't use pte_update function because msrclr was hardcoded. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-07microblaze: Fix asm compilation warningMichal Simek
Microblaze ASM doesn't support hex values for mfs instructions. /tmp/ccwiXVmt.s: Assembler messages: /tmp/ccwiXVmt.s:19: Warning: ignoring operands: x00 Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-07microblaze: Fix IRQ flag handling for MSR=0Michal Simek
Patch: Fix IRQ flag handling naming (sha1: f9ee29270c11dba7d0fe0b83ce47a4d8e8d2101) introduced problem on system with MSR=0. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-07Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesRussell King
2011-02-07ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-07x86, nx: Mark the ACPI resume trampoline code as +xH. Peter Anvin
We reserve lowmem for the things that need it, like the ACPI wakeup code, way early to guarantee availability. This happens before we set up the proper pagetables, so set_memory_x() has no effect. Until we have a better solution, use an initcall to mark the wakeup code executable. Originally-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthias Hopf <mhopf@suse.de> Cc: rjw@sisk.pl Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <4D4F8019.2090104@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-07powerpc: Fix hcall tracepoint recursionAnton Blanchard
Spinlocks on shared processor partitions use H_YIELD to notify the hypervisor we are waiting on another virtual CPU. Unfortunately this means the hcall tracepoints can recurse. The patch below adds a percpu depth and checks it on both the entry and exit hcall tracepoints. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-02-07powerpc/numa: Fix bug in unmap_cpu_from_nodeAnton Blanchard
When converting to the new cpumask code I screwed up: - if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) { - cpu_clear(cpu, numa_cpumask_lookup_table[node]); + if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { + cpumask_set_cpu(cpu, node_to_cpumask_map[node]); This was introduced in commit 25863de07af9 (powerpc/cpumask: Convert NUMA code to new cpumask API) Fix it. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-02-07powerpc/numa: Disable VPHN on dedicated processor partitionsAnton Blanchard
There is no need to start up the timer and monitor topology changes on a dedicated processor partition, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-02-07powerpc/numa: Add length when creating OF properties via VPHNAnton Blanchard
The rest of the NUMA code expects an OF associativity property with the first cell containing the length. Without this fix all topology changes cause us to misparse the property and put the cpu into node 0. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-02-07powerpc/numa: Check for all VPHN changesAnton Blanchard
The hypervisor uses unsigned 1 byte counters to signal topology changes to the OS. Since they can wrap we need to check for any difference, not just if the hypervisor count is greater than the previous count. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-02-07powerpc/numa: Only use active VPHN count fieldsAnton Blanchard
VPHN supports up to 8 distance fields but the number of entries in ibm,associativity-reference-points signifies how many are in use. Don't look at all the VPHN counts, only distance_ref_points_depth worth. Since we already cap our distance metrics at MAX_DISTANCE_REF_POINTS, use that to size the VPHN arrays and add a BUILD_BUG_ON to avoid it growing larger than the VPHN maximum of 8. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-02-07powerpc/pseries: Remove unnecessary variable initializations in numa.cJesse Larrew
Remove unnecessary variable initializations in VPHN functions. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v0.10.2 at 2024-11-14 09:49:12 (GMT)