summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-10-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two KASAN fixes, two EFI boot fixes, two boot-delay optimization fixes, and a fix for a IRQ handling hang observed on virtual platforms" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm, kasan: Silence KASAN warnings in get_wchan() compiler, atomics, kasan: Provide READ_ONCE_NOCHECK() x86, kasan: Fix build failure on KASAN=y && KMEMCHECK=y kernels x86/smpboot: Fix CPU #1 boot timeout x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior x86/ioapic: Disable interrupts when re-routing legacy IRQs x86/setup: Extend low identity map to cover whole kernel range x86/efi: Fix multiple GOP device support
2015-10-23Merge tag 'powerpc-4.3-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8" from Paul - Handle irq_happened flag correctly in off-line loop from Paul - Validate rtas.entry before calling enter_rtas() from Vasant * tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Validate rtas.entry before calling enter_rtas() powerpc/powernv: Handle irq_happened flag correctly in off-line loop powerpc: Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8"
2015-10-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes this time are for incorrect device nodes in various ways, on on imx, berlin, exynos, ux500, uniphier, omap and meson. Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner). Other bug fixes include - a partial revert of a broken tegra gpio patch - irq affinity for arm ccn - suspend on one Armada 385 machine - enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM - turning on a regulator on beagleboard-x15 for HDMI - making the omap gpmc debug code visible - setup of orion network switch - a rare build regression for pxa" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init thermal: exynos: Fix register read in TMU ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory ARM: tegra: Comment out gpio-ranges properties ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board drivers/perf: arm_pmu: avoid CPU device_node reference leak bus: arm-ccn: Fix irq affinity setting on CPU migration bus: arm-ccn: Handle correctly no-more-cpus case ARM: mvebu: correct a385-db-ap compatible string ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers MAINTAINERS: Update Allwinner entry and add new maintainer ARM: ux500: modify initial levelshifter status ARM: pxa: fix pxa3xx DFI lockup hack Documentation: ARM: List new omap MMC requirements memory: omap-gpmc: dump "before" state before first modification memory: omap-gpmc: Fix unselectable debug option for GPMC ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on ARM: dts: Fix audio card detection on Peach boards ARM: EXYNOS: Fix double of_node_put() when parsing child power domains ARM: orion: Fix DSA platform device after mvmdio conversion ...
2015-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM bugfixes from Paolo Bonzini: "Bug fixes for ARM, mostly 4.3 regressions related to virtual interrupt controller changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm/arm64: KVM: Fix disabled distributor operation arm/arm64: KVM: Clear map->active on pend/active clear arm/arm64: KVM: Fix arch timer behavior for disabled interrupts KVM: arm: use GIC support unconditionally KVM: arm/arm64: Fix memory leak if timer initialization fails KVM: arm/arm64: Do not inject spurious interrupts
2015-10-22powerpc/rtas: Validate rtas.entry before calling enter_rtas()Vasant Hegde
Currently we do not validate rtas.entry before calling enter_rtas(). This leads to a kernel oops when user space calls rtas system call on a powernv platform (see below). This patch adds code to validate rtas.entry before making enter_rtas() call. Oops: Exception in kernel mode, sig: 4 [#1] SMP NR_CPUS=1024 NUMA PowerNV task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000 NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140 REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le) MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000 CFAR: c000000000009c0c SOFTE: 0 NIP [0000000000000000] (null) LR [0000000000009c14] 0x9c14 Call Trace: [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable) [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0 [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org # v3.2+ Fixes: 55190f88789a ("powerpc: Add skeleton PowerNV platform") Reported-by: NAGESWARA R. SASTRY <nasastry@in.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Reword change log, trim oops, and add stable + fixes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-21Merge tag 'kvm-arm-for-v4.3-rc7' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master A late round of KVM/ARM fixes for v4.3-rc7, fixing: - A bug where level-triggered interrupts lowered from userspace are still routed to the guest - A memory leak an a failed initialization path - A build error under certain configurations - Several timer bugs introduced with moving the timer to the active state handling instead of the masking trick.
2015-10-21Merge tag 'mvebu-fixes-4.3-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for 4.3 (part 2)" from Gregory CLEMENT: Fix wrong compatible for A385 DB AP preventing using suspend * tag 'mvebu-fixes-4.3-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: correct a385-db-ap compatible string
2015-10-21Merge tag 'samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung 2nd fixes for v4.3" from Kukjin Kim: - fix SOC detection of exynos thermal on exynos5260 - fix audio card detection on Peach boards - fix double of_node_put() when parsing child power domains * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: thermal: exynos: Fix register read in TMU ARM: dts: Fix audio card detection on Peach boards ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
2015-10-21Merge tag 'omap-for-v4.3/fixes-rc6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Fixes for omaps for v4.3-rc cycle" from Tony Lindgren: - Fix oops with LPAE and moew than 2GB of memory by enabling ZONE_DMA for LPAE. Probably no need for stable on this one as we only recently ran into this with the mainline kernel - Fix imprecise external abort caused by bogus SRAM init. This affects dm814x recently merged, so no need for stable on this one AFAIK * tag 'omap-for-v4.3/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
2015-10-21powerpc/powernv: Handle irq_happened flag correctly in off-line loopPaul Mackerras
This fixes a bug where it is possible for an off-line CPU to fail to go into a low-power state (nap/sleep/winkle), and to become unresponsive to requests from the KVM subsystem to wake up and run a VCPU. What can happen is that a maskable interrupt of some kind (external, decrementer, hypervisor doorbell, or HMI) after we have called local_irq_disable() at the beginning of pnv_smp_cpu_kill_self() and before interrupts are hard-disabled inside power7_nap/sleep/winkle(). In this situation, the pending event is marked in the irq_happened flag in the PACA. This pending event prevents power7_nap/sleep/winkle from going to the requested low-power state; instead they return immediately. We don't deal with any of these pending event flags in the off-line loop in pnv_smp_cpu_kill_self() because power7_nap et al. return 0 in this case, so we will have srr1 == 0, and none of the processing to clear interrupts or doorbells will be done. Usually, the most obvious symptom of this is that a KVM guest will fail with a console message saying "KVM: couldn't grab cpu N". This fixes the problem by making sure we handle the irq_happened flags properly. First, we hard-disable before the off-line loop. Once we have hard-disabled, the irq_happened flags can't change underneath us. We unconditionally clear the DEC and HMI flags: there is no processing of timer interrupts while off-line, and the necessary HMI processing is all done in lower-level code. We leave the EE and DBELL flags alone for the first iteration of the loop, so that we won't fail to respond to a split-core request that came in just before hard-disabling. Within the loop, we handle external interrupts if the EE bit is set in irq_happened as well as if the low-power state was interrupted by an external interrupt. (We don't need to do the msgclr for a pending doorbell in irq_happened, because doorbells are edge-triggered and don't remain pending in hardware.) Then we clear both the EE and DBELL flags, and once clear, they cannot be set again (until this CPU comes online again, that is). This also fixes the debug check to not be done when we just ran a KVM guest or when the sleep didn't happen because of a pending event in irq_happened. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-21powerpc: Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on ↵Paul Mackerras
POWER8" This reverts commit 9678cdaae939 ("Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8") because the original commit had multiple, partly self-cancelling bugs, that could cause occasional memory corruption. In fact the logmpp instruction was incorrectly using register r0 as the source of the buffer address and operation code, and depending on what was in r0, it would either do nothing or corrupt the 64k page pointed to by r0. The logmpp instruction encoding and the operation code definitions could be corrected, but then there is the problem that there is no clearly defined way to know when the hardware has finished writing to the buffer. The original commit attempted to work around this by aborting the write-out before starting the prefetch, but this is ineffective in the case where the virtual core is now executing on a different physical core from the one where the write-out was initiated. These problems plus advice from the hardware designers not to use the function (since the measured performance improvement from using the feature was actually mostly negative), mean that reverting the code is the best option. Fixes: 9678cdaae939 ("Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8") Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-20KVM: arm: use GIC support unconditionallyArnd Bergmann
The vgic code on ARM is built for all configurations that enable KVM, but the parent_data field that it references is only present when CONFIG_IRQ_DOMAIN_HIERARCHY is set: virt/kvm/arm/vgic.c: In function 'kvm_vgic_map_phys_irq': virt/kvm/arm/vgic.c:1781:13: error: 'struct irq_data' has no member named 'parent_data' This flag is implied by the GIC driver, and indeed the VGIC code only makes sense if a GIC is present. This changes the CONFIG_KVM symbol to always select GIC, which avoids the issue. Fixes: 662d9715840 ("arm/arm64: KVM: Kill CONFIG_KVM_ARM_{VGIC,TIMER}") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-10-20KVM: arm/arm64: Fix memory leak if timer initialization failsPavel Fedin
Jump to correct label and free kvm_host_cpu_state Reviewed-by: Wei Huang <wei@redhat.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-10-20x86/mm, kasan: Silence KASAN warnings in get_wchan()Andrey Ryabinin
get_wchan() is racy by design, it may access volatile stack of running task, thus it may access redzone in a stack frame and cause KASAN to warn about this. Use READ_ONCE_NOCHECK() to silence these warnings. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de> Cc: kasan-dev <kasan-dev@googlegroups.com> Link: http://lkml.kernel.org/r/1445243838-17763-3-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-20Merge branch 'for-linus-4.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: "This contains four overdue UML regression fixes" * 'for-linus-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix kernel mode fault condition um: Fix waitpid() usage in helper code um: Do not rely on libc to provide modify_ldt() um: Fix out-of-tree build
2015-10-19um: Fix kernel mode fault conditionRichard Weinberger
We have to exclude memory locations <= PAGE_SIZE from the condition and let the kernel mode fault path catch it. Otherwise a kernel NULL pointer exception will be reported as a kernel user space access. Fixes: d2313084e2c (um: Catch unprotected user memory access) Signed-off-by: Richard Weinberger <richard@nod.at>
2015-10-19um: Fix waitpid() usage in helper codeRichard Weinberger
If UML is executing a helper program it is using waitpid() with the __WCLONE flag to wait for the program as the helper is executed from a clone()'ed thread. While using __WCLONE is perfectly fine for clone()'ed childs it won't detect terminated childs if the helper has issued an execve(). We have to use __WALL to wait for both clone()'ed and regular childs to detect the termination before and after an execve(). Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-10-19um: Do not rely on libc to provide modify_ldt()Hans-Werner Hilse
modify_ldt() was declared as an external symbol. Despite the man page for this syscall telling that there is no wrapper in glibc, since version 2.1 there actually is, so linking to the glibc works. Since modify_ldt() is not a POSIX interface, other libc implementations do not always provide a wrapper function. Even glibc headers do not provide a corresponding declaration. So go the recommended way to call this using syscall(). Signed-off-by: Hans-Werner Hilse <hwhilse@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-10-19um: Fix out-of-tree buildRichard Weinberger
Commit 30b11ee9a (um: Remove copy&paste code from init.h) uncovered an issue wrt. out-of-tree builds. For out-of-tree builds, we must not rely on relative paths. Before 30b11ee9a it worked by chance as no host code included generated header files. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Account for extra headroom in ath9k driver, from Felix Fietkau. 2) Fix OOPS in pppoe driver due to incorrect socket state transition, from Guillaume Nault. 3) Kill memory leak in amd-xgbe debugfx, from Geliang Tang. 4) Power management fixes for iwlwifi, from Johannes Berg. 5) Fix races in reqsk_queue_unlink(), from Eric Dumazet. 6) Fix dst_entry usage in ARP replies, from Jiri Benc. 7) Cure OOPSes with SO_GET_FILTER, from Daniel Borkmann. 8) Missing allocation failure check in amd-xgbe, from Tom Lendacky. 9) Various resource allocation/freeing cures in DSA< from Neil Armstrong. 10) A series of bug fixes in the openvswitch conntrack support, from Joe Stringer. 11) Fix two cases (BPF and act_mirred) where we have to clean the sender cpu stored in the SKB before transmitting. From WANG Cong and Alexei Starovoitov. 12) Disable VLAN filtering in promiscuous mode in mlx5 driver, from Achiad Shochat. 13) Older bnx2x chips cannot do 4-tuple UDP hashing, so prevent this configuration via ethtool. From Yuval Mintz. 14) Don't call rt6_uncached_list_flush_dev() from rt6_ifdown() when 'dev' is NULL, from Eric Biederman. 15) Prevent stalled link synchronization in tipc, from Jon Paul Maloy. 16) kcalloc() gstrings ethtool buffer before having driver fill it in, in order to prevent kernel memory leaking. From Joe Perches. 17) Fix mixxing rt6_info initialization for blackhole routes, from Martin KaFai Lau. 18) Kill VLAN regression in via-rhine, from Andrej Ota. 19) Missing pfmemalloc check in sk_add_backlog(), from Eric Dumazet. 20) Fix spurious MSG_TRUNC signalling in netlink dumps, from Ronen Arad. 21) Scrube SKBs when pushing them between namespaces in openvswitch, from Joe Stringer. 22) bcmgenet enables link interrupts too early, fix from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits) net: bcmgenet: Fix early link interrupt enabling tunnels: Don't require remote endpoint or ID during creation. openvswitch: Scrub skb between namespaces xen-netback: correctly check failed allocation net: asix: add support for the Billionton GUSB2AM-1G-B USB adapter netlink: Trim skb to alloc size to avoid MSG_TRUNC net: add pfmemalloc check in sk_add_backlog() via-rhine: fix VLAN receive handling regression. ipv6: Initialize rt6_info properly in ip6_blackhole_route() ipv6: Move common init code for rt6_info to a new function rt6_info_init() Bluetooth: Fix initializing conn_params in scan phase Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanup Bluetooth: Fix remove_device behavior for explicit connects Bluetooth: Fix LE reconnection logic Bluetooth: Fix reference counting for LE-scan based connections Bluetooth: Fix double scan updates mlxsw: core: Fix race condition in __mlxsw_emad_transmit tipc: move fragment importance field to new header position ethtool: Use kcalloc instead of kmalloc for ethtool_get_strings tipc: eliminate risk of stalled link synchronization ...
2015-10-19ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM initTony Lindgren
Some omaps are producing imprecise external aborts because we are wrongly trying to init SRAM for device tree based booting. Only omap3 is still using the legacy SRAM code, so we need to make it omap3 specific. Otherwise we can get errors like this on at least dm814x: Unhandled fault: imprecise external abort (0xc06) at 0xc08b156c ... (omap_rev) from [<c08b12e0>] (omap_sram_init+0xf8/0x3e0) (omap_sram_init) from [<c08aca0c>] (omap_sdrc_init+0x10/0xb0) (omap_sdrc_init) from [<c08b581c>] (pdata_quirks_init+0x18/0x44) (pdata_quirks_init) from [<c08b5478>] (omap_generic_init+0x10/0x1c) (omap_generic_init) from [<c08a57e0>] (customize_machine+0x1c/0x40) (customize_machine) from [<c00098a4>] (do_one_initcall+0x80/0x1dc) (do_one_initcall) from [<c08a2ec4>] (kernel_init_freeable+0x218/0x2e8) (kernel_init_freeable) from [<c063a554>] (kernel_init+0x8/0xec) (kernel_init) from [<c000f890>] (ret_from_fork+0x14/0x24) Let's fix the issue by making sure omap_sdrc_init only gets called for omap3. To do that, we need to have compatible "ti,omap3" in the dts files. And let's also use "ti,omap3630" instead of "ti,omap36xx" like we're supposed to. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-19x86, kasan: Fix build failure on KASAN=y && KMEMCHECK=y kernelsAndrey Ryabinin
Declaration of memcpy() is hidden under #ifndef CONFIG_KMEMCHECK. In asm/efi.h under #ifdef CONFIG_KASAN we #undef memcpy(), due to which the following happens: In file included from arch/x86/kernel/setup.c:96:0: ./arch/x86/include/asm/desc.h: In function ‘native_write_idt_entry’: ./arch/x86/include/asm/desc.h:122:2: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] memcpy(&idt[entry], gate, sizeof(*gate)); ^ cc1: some warnings being treated as errors make[2]: *** [arch/x86/kernel/setup.o] Error 1 We will get rid of that #undef in asm/efi.h eventually. But in the meanwhile move memcpy() declaration out of #ifdefs to fix the build. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444994933-28328-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-19x86/smpboot: Fix CPU #1 boot timeoutLen Brown
The following commit: a9bcaa02a5104ac ("x86/smpboot: Remove SIPI delays from cpu_up()") Caused some Intel Core2 processors to time-out when bringing up CPU #1, resulting in the missing of that CPU after bootup. That patch reduced the SIPI delays from udelay() 300, 200 to udelay() 0, 0 on modern processors. Several Intel(R) Core(TM)2 systems failed to bring up CPU #1 10/10 times after that change. Increasing either of the SIPI delays to udelay(1) results in success. So here we increase both to udelay(10). While this may be 20x slower than the absolute minimum, it is still 20x to 30x faster than the original code. Tested-by: Donald Parsons <dparsons@brightdsl.net> Tested-by: Shane <shrybman@teksavvy.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dparsons@brightdsl.net Cc: shrybman@teksavvy.com Link: http://lkml.kernel.org/r/6dd554ee8945984d85aafb2ad35793174d068af0.1444968087.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-19x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehaviorLen Brown
For legacy machines cpu_init_udelay defaults to 10,000. For modern machines it is set to 0. The user should be able to set cpu_init_udelay to any value on the cmdline, including 10,000. Before this patch, that was seen as "unchanged from default" and thus on a modern machine, the user request was ignored and the delay was set to 0. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dparsons@brightdsl.net Cc: shrybman@teksavvy.com Link: http://lkml.kernel.org/r/de363cdbbcfcca1d22569683f7eb9873e0177251.1444968087.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-16ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memoryTony Lindgren
On boards with more than 2GB of RAM booting goes wrong with things not working and we're getting lots of l3 warnings: WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x384() 44000000.ocp:L3 Custom Error: MASTER MMC6 TARGET DMM1 (Idle): Data Access in User mode during Functional access ... [<c044e158>] (scsi_add_host_with_dma) from [<c04705c8>] (ata_scsi_add_hosts+0x5c/0x18c) [<c04705c8>] (ata_scsi_add_hosts) from [<c046b13c>] (ata_host_register+0x150/0x2cc) [<c046b13c>] (ata_host_register) from [<c046b38c>] (ata_host_activate+0xd4/0x124) [<c046b38c>] (ata_host_activate) from [<c047f42c>] (ahci_host_activate+0x5c/0x194) [<c047f42c>] (ahci_host_activate) from [<c0480854>] (ahci_platform_init_host+0x1f0/0x3f0) [<c0480854>] (ahci_platform_init_host) from [<c047c9dc>] (ahci_probe+0x70/0x98) [<c047c9dc>] (ahci_probe) from [<c04220cc>] (platform_drv_probe+0x54/0xb4) Let's fix the issue by enabling ZONE_DMA for LPAE. Note that we need to limit dma_zone_size to 2GB as the rest of the RAM is beyond the 4GB limit. Let's also fix things for dra7 as done in similar patches in the TI tree by Lokesh Vutla <lokeshvutla@ti.com>. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-16Merge tag 'powerpc-4.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Re-enable CONFIG_SCSI_DH in our defconfigs - Remove unused os_area_db_id_video_mode - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew - cxl: Workaround malformed pcie packets on some cards from Philippe - cxl: Fix number of allocated pages in SPA from Christophe Lombard - Fix checkstop in native_hpte_clear() with lockdep from Cyril - Panic on unhandled Machine Check on powernv from Daniel - selftests/powerpc: Fix build failure of load_unaligned_zeropad test * tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure of load_unaligned_zeropad test powerpc/powernv: Panic on unhandled Machine Check powerpc: Fix checkstop in native_hpte_clear() with lockdep cxl: Fix number of allocated pages in SPA cxl: Workaround malformed pcie packets on some cards cxl: fix leak of ctx->mapping when releasing kernel API contexts cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API cxl: fix leak of IRQ names in cxl_free_afu_irqs() powerpc/ps3: Remove unused os_area_db_id_video_mode powerpc/configs: Re-enable CONFIG_SCSI_DH
2015-10-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: sh: add copy_user_page() alias for __copy_user() lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE mm, dax: fix DAX deadlocks memcg: convert threshold to bytes builddeb: remove debian/files before build mm, fs: obey gfp_mapping for add_to_page_cache()
2015-10-16sh: add copy_user_page() alias for __copy_user()Ross Zwisler
copy_user_page() is needed by DAX. Without this we get a compile error for DAX on SH: fs/dax.c:280:2: error: implicit declaration of function `copy_user_page' [-Werror=implicit-function-declaration] copy_user_page(vto, (void __force *)vfrom, vaddr, to); ^ This was done with a random config that happened to include DAX support. This patch has only been compile tested. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-16x86/ioapic: Disable interrupts when re-routing legacy IRQsVitaly Kuznetsov
A sporadic hang with consequent crash is observed when booting Hyper-V Gen1 guests: Call Trace: <IRQ> [<ffffffff810ab68d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8107b616>] queue_work_on+0x46/0x90 [<ffffffff81365696>] ? add_interrupt_randomness+0x176/0x1d0 ... <EOI> [<ffffffff81471ddb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60 [<ffffffff810c295e>] __irq_put_desc_unlock+0x1e/0x40 [<ffffffff810c5c35>] irq_modify_status+0xb5/0xd0 [<ffffffff8104adbb>] mp_register_handler+0x4b/0x70 [<ffffffff8104c55a>] mp_irqdomain_alloc+0x1ea/0x2a0 [<ffffffff810c7f10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810c860c>] __irq_domain_alloc_irqs+0x13c/0x2b0 [<ffffffff8104b070>] alloc_isa_irq_from_domain.isra.1+0xc0/0xe0 [<ffffffff8104bfa5>] mp_map_pin_to_irq+0x165/0x2d0 [<ffffffff8104c157>] pin_2_irq+0x47/0x80 [<ffffffff81744253>] setup_IO_APIC+0xfe/0x802 ... [<ffffffff814631c0>] ? rest_init+0x140/0x140 The issue is easily reproducible with a simple instrumentation: if mdelay(10) is put between mp_setup_entry() and mp_register_handler() calls in mp_irqdomain_alloc() Hyper-V guest always fails to boot when re-routing IRQ0. The issue seems to be caused by the fact that we don't disable interrupts while doing IOPIC programming for legacy IRQs and IRQ0 actually happens. Protect the setup sequence against concurrent interrupts. [ tglx: Make the protection unconditional and not only for legacy interrupts ] Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1444930943-19336-1-git-send-email-vkuznets@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-16x86/setup: Extend low identity map to cover whole kernel rangePaolo Bonzini
On 32-bit systems, the initial_page_table is reused by efi_call_phys_prolog as an identity map to call SetVirtualAddressMap. efi_call_phys_prolog takes care of converting the current CPU's GDT to a physical address too. For PAE kernels the identity mapping is achieved by aliasing the first PDPE for the kernel memory mapping into the first PDPE of initial_page_table. This makes the EFI stub's trick "just work". However, for non-PAE kernels there is no guarantee that the identity mapping in the initial_page_table extends as far as the GDT; in this case, accesses to the GDT will cause a page fault (which quickly becomes a triple fault). Fix this by copying the kernel mappings from swapper_pg_dir to initial_page_table twice, both at PAGE_OFFSET and at identity mapping. For some reason, this is only reproducible with QEMU's dynamic translation mode, and not for example with KVM. However, even under KVM one can clearly see that the page table is bogus: $ qemu-system-i386 -pflash OVMF.fd -M q35 vmlinuz0 -s -S -daemonize $ gdb (gdb) target remote localhost:1234 (gdb) hb *0x02858f6f Hardware assisted breakpoint 1 at 0x2858f6f (gdb) c Continuing. Breakpoint 1, 0x02858f6f in ?? () (gdb) monitor info registers ... GDT= 0724e000 000000ff IDT= fffbb000 000007ff CR0=0005003b CR2=ff896000 CR3=032b7000 CR4=00000690 ... The page directory is sane: (gdb) x/4wx 0x32b7000 0x32b7000: 0x03398063 0x03399063 0x0339a063 0x0339b063 (gdb) x/4wx 0x3398000 0x3398000: 0x00000163 0x00001163 0x00002163 0x00003163 (gdb) x/4wx 0x3399000 0x3399000: 0x00400003 0x00401003 0x00402003 0x00403003 but our particular page directory entry is empty: (gdb) x/1wx 0x32b7000 + (0x724e000 >> 22) * 4 0x32b7070: 0x00000000 [ It appears that you can skate past this issue if you don't receive any interrupts while the bogus GDT pointer is loaded, or if you avoid reloading the segment registers in general. Andy Lutomirski provides some additional insight: "AFAICT it's entirely permissible for the GDTR and/or LDT descriptor to point to unmapped memory. Any attempt to use them (segment loads, interrupts, IRET, etc) will try to access that memory as if the access came from CPL 0 and, if the access fails, will generate a valid page fault with CR2 pointing into the GDT or LDT." Up until commit 23a0d4e8fa6d ("efi: Disable interrupts around EFI calls, not in the epilog/prolog calls") interrupts were disabled around the prolog and epilog calls, and the functional GDT was re-installed before interrupts were re-enabled. Which explains why no one has hit this issue until now. ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Laszlo Ersek <lersek@redhat.com> Cc: <stable@vger.kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com> [ Updated changelog. ]
2015-10-15Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here are a few more arm64 fixes for 4.3. Again, nothing too significant, but worth having nonetheless. The MINSIGSTKSZ update is a bit grotty, but the value we currently have is wrong (too small), so anybody using that will have issues already. It has Arnd's ack for the asm-generic change. Summary: - Fix module CFLAGS setting in workaround for erratum #843419 - Update MINSIGSTKSZ and SIGSTKSZ to match glibc - Wire up some new compat syscalls" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: wire up new syscalls arm64: Fix MINSIGSTKSZ and SIGSTKSZ arm64: errata: use KBUILD_CFLAGS_MODULE for erratum #843419
2015-10-15ARM: tegra: Comment out gpio-ranges propertiesThierry Reding
While the addition of these properties is technically correct it unveils a bug with deferred probe. The problem is that the presence of the gpio- range property causes the gpio-tegra driver to defer probe (it needs the pinctrl driver to be ready). That's technically correct, but it causes a couple of issues: - The keyboard on Chromebooks stops working. The reason for that is that the gpio-tegra device has not registered an IRQ domain by the time the EC SPI device is registered, hence the interrupt number resolves to 0. This is technically a bug in the SPI core, since it should really resolve the interrupt at probe time and defer if the IRQ domain isn't available yet. This is similar to what's done for I2C and platform device already. - The gpio-tegra device deferring probe means that it is moved to the end of the dpm_list. This list defines the suspend/resume order for devices. However the core lacks a way to move all users of the gpio-tegra device to the end of the dpm_list at the same time. This in turn results in a subtle bug on Jetson TK1, where the gpio-keys device is used to expose the power key as input. The power key is a convenient way to wake the system from suspend. Interestingly, the gpio-keys device ends up getting probed at a point after gpio-tegra has been probed successfully from having been deferred earlier. As such the driver doesn't need to defer the probe itself, and hence the device isn't moved to the end of the dpm_list. This causes the gpio-tegra device to be suspended before gpio-keys, which in turn leaves gpio-keys unable to wake the system from suspend. There are patches in the works to fix both of the above issues, but they are too involved to make it into v4.3, so in the meantime let's fix the regressions by commenting out the gpio-ranges properties until the fixes have landed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15Merge tag 'omap-for-v4.3/fixes-rc5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Fixes for omap against v4.3-rc5" from Tony Lindgren: - Regulator fix for beagle-x15 to fix HDMI without a SD card being inserted - GPMC fix for showing proper timings and to allow enabling debug options that somehow was unselectable earlier - Add minimal documentation for new MMC1 dependency on REGULATOR_PBIAS as it may not be obvious for people with targeted .config files * tag 'omap-for-v4.3/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Documentation: ARM: List new omap MMC requirements memory: omap-gpmc: dump "before" state before first modification memory: omap-gpmc: Fix unselectable debug option for GPMC ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
2015-10-15ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref boardMasahiro Yamada
The IRQ signal from external devices on this board is connected to the XIRQ4 pin of the SoC. The IRQ number should be 52, not 50. Fixes: a5e921b4771f ("ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15ARM: mvebu: correct a385-db-ap compatible stringMarcin Wojtas
This commit enables standby support on Armada 385 DB-AP board, because the PM initalization routine requires "marvell,armada380" compatible string for all Armada 38x-based platforms. Beside the compatible "marvell,armada38x" was wrong and should be fixed in the stable kernels too. [gregory.clement@free-electrons.com: add information, about the fixes] Fixes: e5ee12817e9ea ("ARM: mvebu: Add Armada 385 Access Point Development Board support") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org>
2015-10-14ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbersCarlo Caione
The DTS erronously uses the wrong reg mapping and IRQ numbers for some UART, WDT and timer nodes. Fix this. Reported-by: John Wehle <john@feith.com> Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bug fixes for system management mode emulation. The first two patches fix SMM emulation on Nehalem processors. The others fix some cases that became apparent as work progressed on the firmware side" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix RSM into 64-bit protected mode KVM: x86: fix previous commit for 32-bit KVM: x86: fix SMI to halted VCPU KVM: x86: clean up kvm_arch_vcpu_runnable KVM: x86: map/unmap private slots in __x86_set_memory_region KVM: x86: build kvm_userspace_memory_region in x86_set_memory_region
2015-10-14ARM: ux500: modify initial levelshifter statusLinus Walleij
commit 1d8aca9df612f5751892fb2642d72536f2f48fd0 "ARM: ux500: fix MMC/SD card regression" fixed broken the level shifter: it should be default ON but became default OFF. Fixes: 1d8aca9df612 "ARM: ux500: fix MMC/SD card regression" Reported-and-tested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-14ARM: pxa: fix pxa3xx DFI lockup hackArnd Bergmann
Some recently added code to avoid a bug introduced a build error when CONFIG_PM is disabled and a macro is hidden: arch/arm/mach-pxa/pxa3xx.c: In function 'pxa3xx_init': arch/arm/mach-pxa/pxa3xx.c:439:3: error: 'NDCR' undeclared (first use in this function) NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL; ^ This moves the macro outside of the #ifdef so it can be referenced correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: adf3442cc890 ("ARM: pxa: fix DFI bus lockups on startup") Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14Merge tag 'imx-fixes-4.3-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "The i.MX fixes for 4.3, 2nd round:" from Shawn Guo: It includes a single fix for i.MX7D, which corrects the base address of UART2 in device tree. * tag 'imx-fixes-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d: Fix UART2 base address
2015-10-14Merge tag 'berlin-fixes-for-4.3-1' of ↵Arnd Bergmann
git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "Marvell Berlin fixes for v4.3 take 1" from Sebastian Hesselbarth: - BG2Q USB PHY compatible fix (also tagged for stable v4.2) * tag 'berlin-fixes-for-4.3-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: change BG2Q's USB PHY compatible
2015-10-14Merge tag 'mvebu-fixes-4.3-1' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for 4.3 (part 1)" from Gregory CLEMENT: DSA fixes for orion platform * tag 'mvebu-fixes-4.3-1' of git://git.infradead.org/linux-mvebu: ARM: orion: Fix DSA platform device after mvmdio conversion
2015-10-14KVM: x86: fix RSM into 64-bit protected modePaolo Bonzini
In order to get into 64-bit protected mode, you need to enable paging while EFER.LMA=1. For this to work, CS.L must be 0. Currently, we load the segments before CR0 and CR4, which means that if RSM returns into 64-bit protected mode CS.L is already 1 and everything breaks. Luckily, CS.L=0 is always the case when executing RSM, because it is forbidden to execute RSM from 64-bit protected mode. Hence it is enough to load CR0 and CR4 first, and only then the segments. Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: fix previous commit for 32-bitPaolo Bonzini
Unfortunately I only noticed this after pushing. Fixes: f0d648bdf0a5bbc91da6099d5282f77996558ea4 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14x86/efi: Fix multiple GOP device supportKővágó, Zoltán
When multiple GOP devices exists, but none of them implements ConOut, the code should just choose the first GOP (according to the comments). But currently 'fb_base' will refer to the last GOP, while other parameters to the first GOP, which will likely result in a garbled display. I can reliably reproduce this bug using my ASRock Z87M Extreme4 motherboard with CSM and integrated GPU disabled, and two PCIe video cards (NVidia GT640 and GTX980), booting from efi-stub (booting from grub works fine). On the primary display the ASRock logo remains and on the secondary screen it is garbled up completely. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444659236-24837-2-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-14arm64: compat: wire up new syscallsWill Deacon
Commit 208473c1f3ac ("ARM: wire up new syscalls") hooked up the new userfaultfd and membarrier syscalls for ARM, so do the same for our compat syscall table in arm64. Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Fix AVX detection to prevent use of non-existent AESNI. - Some SPARC ciphers did not set their IV size which may lead to memory corruption" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ahash - ensure statesize is non-zero crypto: camellia_aesni_avx - Fix CPU feature checks crypto: sparc - initialize blkcipher.ivsize
2015-10-13KVM: x86: fix SMI to halted VCPUPaolo Bonzini
An SMI to a halted VCPU must wake it up, hence a VCPU with a pending SMI must be considered runnable. Fixes: 64d6067057d9658acb8675afcfba549abdb7fc16 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: clean up kvm_arch_vcpu_runnablePaolo Bonzini
Split the huge conditional in two functions. Fixes: 64d6067057d9658acb8675afcfba549abdb7fc16 Cc: stable@vger.kernel.org Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: map/unmap private slots in __x86_set_memory_regionPaolo Bonzini
Otherwise, two copies (one of them never populated and thus bogus) are allocated for the regular and SMM address spaces. This breaks SMM with EPT but without unrestricted guest support, because the SMM copy of the identity page map is all zeros. By moving the allocation to the caller we also remove the last vestiges of kernel-allocated memory regions (not accessible anymore in userspace since commit b74a07beed0e, "KVM: Remove kernel-allocated memory regions", 2010-06-21); that is a nice bonus. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5ac969909f6b435ce28ea28135a9cbd69 Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>