| Age | Commit message (Collapse) | Author |
|---|
|
The Ethernet nodes 0 and 1 aren't present on LS1046A RDB platforms.
Remove the nodes in order to avoid error messages at boot time.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
|
|
The performance is impacted if the memory is mapped as non coherent.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
|
|
This patch adds the device nodes for flexcan controller(s) present on
LS1021A-Rev2 SoC.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
|
|
The flexcan driver has been modified to check for big-endian dts
property for be read/write to flexcan registers/mb.
An exception to this rule is powerpc P1010RDB, which is always
big-endian, even if big-endian is not present in dts. This is
checked using p1010-flexcan compatible in dts.
Therefore, remove p1010-flexcan compatible from imx series dts,
as their flexcan core is little endian.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
|
|
The flexcan driver assumed that flexcan controller is big endian for
powerpc architecture and little endian for other architectures.
But this is not universally true. flexcan controller can be little or
big endian on any architecture.
Therefore the flexcan driver has been modified to check for "big-endian"
device tree property for controllers that are big endian.
consequently add the property to freescale P1010 SOC device tree.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Keep PCIe node in "disabled" status as SoC default.
Only enable it for boards with PCIe circuit designed,
such as LS1012ARDB and LS1012AQDS.
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
|
|
LS1012A-2G5RDB is a different design from LS1012ARDB,
but has some common SoC features. Key feature on this
board is 2.5Gbps SGMII.
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
|
|
Add set/clear bits functions for ARM platform which are used by ehci fsl
driver.
Signed-off-by: Rajesh Bhagat <rejesh.bhagat@nxp.com>
|
|
Signed-off-by: Wen He <wen.he_1@nxp.com>
|
|
The compatible node is to mark the 1021a esdhc HW feature
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
Ls1021a esdhc had been enabled in uboot,
but it had not been enabled it in kernel,
So set the esdhc's status to "okay".
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
Enable CONFIG_CRYPTO_USER to allow for configuring crypto algorithms
from user space, for e.g. changing their priorities.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Add optee device tree node on ls1012a, ls1043a, ls1046a, ls1088a
and ls208xa.
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch enables configs for Trusted Execution Environment (TEE) and
OP-TEE.
+CONFIG_TEE=y
+CONFIG_OPTEE=y
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
[PowerPC part]
QEIC was supported on PowerPC, and dependent on PPC,
Now it is supported on other platforms, so remove PPCisms.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
[PowerPC part]
The codes of qe_ic init from a variety of platforms are redundant,
merge them to a common function and put it to irqchip/irq-qeic.c
For non-p1021_mds mpc85xx_mds boards, use "qe_ic_init(np, 0,
qe_ic_cascade_low_mpic, qe_ic_cascade_high_mpic);" instead of
"qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);".
qe_ic_cascade_muxed_mpic was used for boards has the same interrupt
number for low interrupt and high interrupt, qe_ic_init has checked
if "low interrupt == high interrupt"
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Enable CAAM (Cryptographic Accelerator and Assurance Module) driver
for QorIQ Data Path Acceleration Architecture (DPAA) v2.
It handles DPSECI (Data Path SEC Interface) DPAA2 objects that sit
on the Management Complex (MC) fsl-mc bus.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
add CONFIG_FSL_PPFE_UTIL_DISABLED to arm32
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Recently logic to enable RGMII tx delay was changed by
below patch.
https://patchwork.kernel.org/patch/9447581/
Based on the patch, enabling tx delay again using rgmii-txid.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
|
|
Update ls1012a dtsi and platform dts files with
support for ppfe.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
|
|
[config part]
This patch introduces Linux support for NXP's LS1012A Packet
Forwarding Engine (pfe_eth). LS1012A uses hardware packet forwarding
engine to provide high performance Ethernet interfaces. The device
includes two Ethernet ports.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
The arm64 DMA-mapping implementation sets the DMA ops to the IOMMU DMA
ops if we detect that an IOMMU is present for the master and the DMA
ranges are valid.
In the case when the IOMMU domain for the device is not of type
IOMMU_DOMAIN_DMA, then we have no business swizzling the ops, since
we're not in control of the underlying address space. This patch leaves
the DMA ops alone for masters attached to non-DMA IOMMU domains.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Integrated-by: Guanhua Gao <guanhua.gao@nxp.com>
|
|
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
|
|
Add PCIe controller node for ls1012a platform.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
|
|
Add MSI controller node for ls1012a platform.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
|
|
Add the identify of the platform to support set the rcpm with
big-endian or little-endian.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Add the identify of the platform to support set the rcpm with
big-endian or little-endian.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Add the identify of the platform to support set the rcpm with
big-endian or little-endian.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Add the identify of the platform to support set the rcpm with
big-endian or little-endian.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Add the identify of the platform to support set the rcpm with
big-endian or little-endian.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Add the identify of the platform to support set the rcpm with
big-endian or little-endian.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
This reverts commit 97303480753e48fb313dc0e15daaf11b0451cdb8.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
|
|
According to PSCI standard v0.2, for CPU_SUSPEND call, which is
used by cpu idle framework, bit[16] of state parameter must be 0.
So update bit[16] of property 'arm,psci-suspend-param', which is
used as state parameter, to 0.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
|
|
1588 stack requires multicast communication. It's proper
to enable CONFIG_IP_MULTICAST in default.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
|
|
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Add "snps,quirk-frame-length-adjustment" property to
USB3 node for erratum A009116. This property provides
value of GFLADJ_30MHZ for post silicon frame length
adjustment.
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch adds iommu-map property for PCIe, which enables
SMMU for these devices on LS1088.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
|
|
This patch adds iommu-map property for PCIe, which enables
SMMU for these devices on LS208xA devices.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
|
|
Since everybody copied my own mistake from the DT binding example,
let's address all the offenders in one swift go.
Most of them got the CPU interface size wrong (4kB, while it should
be 8kB), except for both keystone platforms which got the control
interface wrong (4kB instead of 8kB).
In a few cases where I knew for sure what implementation was used,
I've added the "arm,gic-400" compatible string. I'm 99% sure that
this is what everyone is using, but short of having the TRM for
all the other SoCs, I've left them alone.
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
32bit system
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
|
|
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
|
|
Register the DMA ops for fsl-mc bus
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
