summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-01-18Merge tag 'armsoc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "We've been sitting on our fixes branch for a while, so this batch is unfortunately on the large side. A lot of these are tweaks and fixes to device trees, fixing various bugs around clocks, reg ranges, etc. There's also a few defconfig updates (which are on the late side, no more of those). All in all the diffstat is bigger than ideal at this time, but nothing in here seems particularly risky" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) reset: sunxi: fix spinlock initialization ARM: dts: disable CCI on exynos5420 based arndale-octa drivers: bus: check cci device tree node status ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 ARM: nomadik: fix up leftover device tree pins ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host ARM: dts: Revert disabling of smc91x for n900 ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ...
2015-01-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also two PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools powerpc: Use dwfl_report_elf() instead of offline. perf tools: Fix segfault for symbol annotation on TUI perf test: Fix dwarf unwind using libunwind. perf tools: Avoid build splat for syscall numbers with uclibc perf tools: Elide strlcpy warning with uclibc perf tools: Fix statfs.f_type data type mismatch build error with uclibc tools: Remove bitops/hweight usage of bits in tools/perf perf machine: Fix __machine__findnew_thread() error path perf tools: Fix building error in x86_64 when dwarf unwind is on perf probe: Propagate error code when write(2) failed perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM perf/rapl: Fix sysfs_show() initialization for RAPL PMU
2015-01-17Merge tag 'samsung-fixes-3.19' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.19" from Kukjin Kim: Samsung fixes for v3.19 - exynos_defconfig: enable LM90 driver and display panel support - HWMON - SENSORS_LM90 - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support - use pmu_system_controller phandle for dp phy : DP PHY requires pmu_system_controller to handle PMU reg. now * tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'renesas-soc-fixes-for-v3.19' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: Renesas ARM Based SoC Fixes for v3.19 This pull request is based on the last round of SoC updates for v3.19, Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as renesas-soc3-for-v3.19, merged into your next/soc branch and included in v3.19-rc1. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds Set .control_parent for all irqpin instances for sh73a0 SoC when booting using legacy C. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds This fixes a long standing problem which has been present since the sh73a0 SoC started using the INTC External IRQ pin driver. The patch that introduced the problem is 341eb5465f67437a ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") which was included in v3.10. * tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
2015-01-17ARM: dts: disable CCI on exynos5420 based arndale-octaAbhilash Kesavan
The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'at91-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre: First fixes batch for AT91 on 3.19: - fix some DT entries - correct clock entry for the at91sam9263 LCD - add a phy_fixup for Eth1 on sama5d4 * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288Heiko Stübner
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'berlin-fixes-for-3.19-1' of ↵Olof Johansson
git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "ARM: berlin: Fixes for v3.19 (round 1)" from Sebastian Hesselbarth: Marvell Berlin fixes for v3.19 round 1: - SDHCI DT fixes for BG2Q and BG2Q reference board - BG2Q SM GPIO DT node relocation * tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17ARM: nomadik: fix up leftover device tree pinsLinus Walleij
We altered the device tree bindings for the Nomadik family of pin controllers to be standard, this file was merged out-of-order so we missed fixing this. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'omap-for-v3.19/fixes-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.19-rc1" from Tony Lindgren: Fixes for omaps mostly to deal with dra7 timer issues and hypervisor mode. The other fixes are minor fixes for various boards. The summary of the fixes is: - Fix real-time counter rate typos for some frequencies - Fix counter frequency drift for am572x - Fix booting of secondary CPU in HYP mode - Fix n900 board name for legacy user space - Fix cpufreq in omap2plus_defconfig after Kconfig change - Fix dra7 qspi partitions And also, let's re-enable smc91x on some n900 boards that we have sitting in a few test boot systems after the boot loader dependencies got fixed. * tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Revert disabling of smc91x for n900 ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ARM: OMAP2+: Fix n900 board name for legacy user space ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode ARM: dra7xx: Fix counter frequency drift for AM572x errata i856 ARM: omap5/dra7xx: Fix frequency typos Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'imx-fixes-3.19' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.19" from Shawn Guo: The i.MX fixes for 3.19: - One fix for incorrect i.MX25 SPI1 clock assignment in device tree, which causes system hang when accessing SPI1. - Correct i.MX6SX QSPI parent clock configuration to fix a kernel Oops. - Fix ULPI PHY reset modelling on imx51-babbage board to remove the dependency on bootloader for USB3317 ULPI PHY reset. - Correct video divider setting on i.MX6Q rev T0 1.0 to fix the issue that HDMI is not working at high resolution on T0 1.0. - One incremental fix for CODA960 VPU enabling in device tree to correct interrupt order. - LS1021A SCFG block works in BE mode, add device tree property big-endian to make it right. * tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: imx6sx: Set PLL2 as parent of QSPI clocks ARM: dts: imx25: Fix the SPI1 clocks ARM: clk-imx6q: fix video divider for rev T0 1.0 ARM: dts: imx6qdl: Fix CODA960 interrupt order ARM: ls1021a: dtsi: add 'big-endian' property for scfg node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'v3.19-rockchip-dtsfixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: dts fix for 3.19" from Heiko Stübner: Increase drive-strength to sdmmc pins on rk3288-evb to fix an issue with the fixed highspeed card detection. * tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-16Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Wire up compat_sys_execveat for compat (AArch32) tasks - Revert 421520ba9829, as this breaks our side of the boot protocol * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: partially revert "ARM: 8167/1: extend the reserved memory for initrd to be page aligned" arm64: compat: wire up compat_sys_execveat
2015-01-16Merge tag 'trace-fixes-v3.19-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "This holds a few fixes to the ftrace infrastructure as well as the mixture of function graph tracing and kprobes. When jprobes and function graph tracing is enabled at the same time it will crash the system: # modprobe jprobe_example # echo function_graph > /sys/kernel/debug/tracing/current_tracer After the first fork (jprobe_example probes it), the system will crash. This is due to the way jprobes copies the stack frame and does not do a normal function return. This messes up with the function graph tracing accounting which hijacks the return address from the stack and replaces it with a hook function. It saves the return addresses in a separate stack to put back the correct return address when done. But because the jprobe functions do not do a normal return, their stack addresses are not put back until the function they probe is called, which means that the probed function will get the return address of the jprobe handler instead of its own. The simple fix here was to disable function graph tracing while the jprobe handler is being called. While debugging this I found two minor bugs with the function graph tracing. The first was about the function graph tracer sharing its function hash with the function tracer (they both get filtered by the same input). The changing of the set_ftrace_filter would not sync the function recording records after a change if the function tracer was disabled but the function graph tracer was enabled. This was due to the update only checking one of the ops instead of the shared ops to see if they were enabled and should perform the sync. This caused the ftrace accounting to break and a ftrace_bug() would be triggered, disabling ftrace until a reboot. The second was that the check to update records only checked one of the filter hashes. It needs to test both the "filter" and "notrace" hashes. The "filter" hash determines what functions to trace where as the "notrace" hash determines what functions not to trace (trace all but these). Both hashes need to be passed to the update code to find out what change is being done during the update. This also broke the ftrace record accounting and triggered a ftrace_bug(). This patch set also include two more fixes that were reported separately from the kprobe issue. One was that init_ftrace_syscalls() was called twice at boot up. This is not a major bug, but that call performed a rather large kmalloc (NR_syscalls * sizeof(*syscalls_metadata)). The second call made the first one a memory leak, and wastes memory. The other fix is a regression caused by an update in the v3.19 merge window. The moving to enable events early, moved the enabling before PID 1 was created. The syscall events require setting the TIF_SYSCALL_TRACEPOINT for all tasks. But for_each_process_thread() does not include the swapper task (PID 0), and ended up being a nop. A suggested fix was to add the init_task() to have its flag set, but I didn't really want to mess with PID 0 for this minor bug. Instead I disable and re-enable events again at early_initcall() where it use to be enabled. This also handles any other event that might have its own reg function that could break at early boot up" * tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix enabling of syscall events on the command line tracing: Remove extra call to init_ftrace_syscalls() ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing ftrace: Check both notrace and filter for old hash ftrace: Fix updating of filters for shared global_ops filters
2015-01-16arm64: partially revert "ARM: 8167/1: extend the reserved memory for initrd ↵Catalin Marinas
to be page aligned" This patch partially reverts commit 421520ba98290a73b35b7644e877a48f18e06004 (only the arm64 part). There is no guarantee that the boot-loader places other images like dtb in a different page than initrd start/end, especially when the kernel is built with 64KB pages. When this happens, such pages must not be freed. The free_reserved_area() already takes care of rounding up "start" and rounding down "end" to avoid freeing partially used pages. Cc: <stable@vger.kernel.org> # 3.17+ Reported-by: Peter Maydell <Peter.Maydell@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-01-16perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLMKan Liang
cycles:p and cycles:pp do not work on SLM since commit: 86a04461a99f ("perf/x86: Revamp PEBS event selection") UOPS_RETIRED.ALL is not a PEBS capable event, so it should not be used to count cycle number. Actually SLM calls intel_pebs_aliases_core2() which uses INST_RETIRED.ANY_P to count the number of cycles. It's a PEBS capable event. But inv and cmask must be set to count cycles. Considering SLM allows all events as PEBS with no flags, only INST_RETIRED.ANY_P, inv=1, cmask=16 needs to handled specially. Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421084541-31639-1-git-send-email-kan.liang@intel.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-16perf/rapl: Fix sysfs_show() initialization for RAPL PMUStephane Eranian
This patch fixes a problem with the initialization of the sysfs_show() routine for the RAPL PMU. The current code was wrongly relying on the EVENT_ATTR_STR() macro which uses the events_sysfs_show() function in the x86 PMU code. That function itself was relying on the x86_pmu data structure. Yet RAPL and the core PMU (x86_pmu) have nothing to do with each other. They should therefore not interact with each other. The x86_pmu structure is initialized at boot time based on the host CPU model. When the host CPU is not supported, the x86_pmu remains uninitialized and some of the callbacks it contains are NULL. The false dependency with x86_pmu could potentially cause crashes in case the x86_pmu is not initialized while the RAPL PMU is. This may, for instance, be the case in virtualized environments. This patch fixes the problem by using a private sysfs_show() routine for exporting the RAPL PMU events. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150113225953.GA21525@thinkpad Cc: vincent.weaver@maine.edu Cc: jolsa@redhat.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixlet from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up execveat
2015-01-16Merge tag 'powerpc-3.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "A few powerpc fixes" * tag 'powerpc-3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: Work around gcc bug in current_thread_info() cxl: Fix issues when unmapping contexts powernv: Fix OPAL tracepoint code
2015-01-15ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracingSteven Rostedt (Red Hat)
If the function graph tracer traces a jprobe callback, the system will crash. This can easily be demonstrated by compiling the jprobe sample module that is in the kernel tree, loading it and running the function graph tracer. # modprobe jprobe_example.ko # echo function_graph > /sys/kernel/debug/tracing/current_tracer # ls The first two commands end up in a nice crash after the first fork. (do_fork has a jprobe attached to it, so "ls" just triggers that fork) The problem is caused by the jprobe_return() that all jprobe callbacks must end with. The way jprobes works is that the function a jprobe is attached to has a breakpoint placed at the start of it (or it uses ftrace if fentry is supported). The breakpoint handler (or ftrace callback) will copy the stack frame and change the ip address to return to the jprobe handler instead of the function. The jprobe handler must end with jprobe_return() which swaps the stack and does an int3 (breakpoint). This breakpoint handler will then put back the saved stack frame, simulate the instruction at the beginning of the function it added a breakpoint to, and then continue on. For function tracing to work, it hijakes the return address from the stack frame, and replaces it with a hook function that will trace the end of the call. This hook function will restore the return address of the function call. If the function tracer traces the jprobe handler, the hook function for that handler will not be called, and its saved return address will be used for the next function. This will result in a kernel crash. To solve this, pause function tracing before the jprobe handler is called and unpause it before it returns back to the function it probed. Some other updates: Used a variable "saved_sp" to hold kcb->jprobe_saved_sp. This makes the code look a bit cleaner and easier to understand (various tries to fix this bug required this change). Note, if fentry is being used, jprobes will change the ip address before the function graph tracer runs and it will not be able to trace the function that the jprobe is probing. Link: http://lkml.kernel.org/r/20150114154329.552437962@goodmis.org Cc: stable@vger.kernel.org # 2.6.30+ Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't use uninitialized data in IPVS, from Dan Carpenter. 2) conntrack race fixes from Pablo Neira Ayuso. 3) Fix TX hangs with i40e, from Jesse Brandeburg. 4) Fix budget return from poll calls in dnet and alx, from Eric Dumazet. 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph Jaeger. 6) Fix bug introduced by conversion to list_head in TIPC retransmit code, from Jon Paul Maloy. 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey Khoroshilov. 8) Fix bridge build with INET disabled, from Arnd Bergmann. 9) Fix netlink array overrun for PROBE attributes in openvswitch, from Thomas Graf. 10) Don't hold spinlock across synchronize_irq() in tg3 driver, from Prashant Sreedharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) tg3: Release tp->lock before invoking synchronize_irq() tg3: tg3_reset_task() needs to use rtnl_lock to synchronize tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin openvswitch: packet messages need their own probe attribtue i40e: adds FCoE configure option cxgb4vf: Fix queue allocation for 40G adapter netdevice: Add missing parentheses in macro bridge: only provide proxy ARP when CONFIG_INET is enabled neighbour: fix base_reachable_time(_ms) not effective immediatly when changed net: fec: fix MDIO bus assignement for dual fec SoC's xen-netfront: use different locks for Rx and Tx stats drivers: net: cpsw: fix multicast flush in dual emac mode cxgb4vf: Initialize mdio_addr before using it net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb() MAINTAINERS: add me as ibmveth maintainer tipc: fix bug in broadcast retransmit code update ip-sysctl.txt documentation (v2) net/at91_ether: prepare and unprepare clock ...
2015-01-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Two bugfixes for arm64. I will have another pull request next week, but otherwise things are calm" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Fix HCR setting for 32bit guests arm64: KVM: Fix TLB invalidation by IPA/VMID
2015-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two small performance tweaks, the plumbing for the execveat system call and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uprobes: fix user space PER events s390/bpf: Fix JMP_JGE_X (A > X) and JMP_JGT_X (A >= X) s390/bpf: Fix ALU_NEG (A = -A) s390/mm: avoid using pmd_to_page for !USE_SPLIT_PMD_PTLOCKS s390/timex: fix get_tod_clock_ext() inline assembly s390: wire up execveat syscall s390/kernel: use stnsm 255 instead of stosm 0 s390/vtime: Get rid of redundant WARN_ON s390/zcrypt: kernel oops at insmod of the z90crypt device driver
2015-01-14net: fec: fix MDIO bus assignement for dual fec SoC'sStefan Agner
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13Merge tag 'stable/for-linus-3.19-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: "Several critical linear p2m fixes that prevented some hosts from booting" * tag 'stable/for-linus-3.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: properly retrieve NMI reason xen: check for zero sized area when invalidating memory xen: use correct type for physical addresses xen: correct race in alloc_p2m_pmd() xen: correct error for building p2m list on 32 bits x86/xen: avoid freeing static 'name' when kasprintf() fails x86/xen: add extra memory for remapped frames during setup x86/xen: don't count how many PFNs are identity mapped x86/xen: Free bootmem in free_p2m_page() during early boot x86/xen: Remove unnecessary BUG_ON(preemptible()) in xen_setup_timer()
2015-01-13x86/xen: properly retrieve NMI reasonJan Beulich
Using the native code here can't work properly, as the hypervisor would normally have cleared the two reason bits by the time Dom0 gets to see the NMI (if passed to it at all). There's a shared info field for this, and there's an existing hook to use - just fit the two together. This is particularly relevant so that NMIs intended to be handled by APEI / GHES actually make it to the respective handler. Note that the hook can (and should) be used irrespective of whether being in Dom0, as accessing port 0x61 in a DomU would be even worse, while the shared info field would just hold zero all the time. Note further that hardware NMI handling for PVH doesn't currently work anyway due to missing code in the hypervisor (but it is expected to work the native rather than the PV way). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12arm64: compat: wire up compat_sys_execveatWill Deacon
With 841ee230253f ("ARM: wire up execveat syscall"), arch/arm/ has grown support for the execveat system call. This patch wires up the compat variant for arm64. Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-01-12ARM: at91: board-dt-sama5: add phy_fixup to override NAND_TreeWenyou Yang
Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work. Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081, But it outputs LOW during the reset period, which cause the NAND_Tree# enabled. Add phy_fixup() to disable NAND_Tree by overriding the Operation Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-12ARM: at91/dt: sam9263: Add missing clocks to lcdc nodeAlexander Stein
atmel_lcdfb needs also uses hclk clock, but AT91SAM9263 doesn't have that specific clock, so use lcd_clk twice. The same was done in arch/arm/mach-at91/at91sam9263.c Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-12ARM: at91: sama5d3: dt: correct the sound routeBo Shen
The MICBIAS is a supply, should route to MIC while not IN1L. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-12ARM: at91/dt: sama5d4: fix the timer reg lengthBo Shen
The second property of reg is the length, so correct it for timer. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-12arm64: KVM: Fix HCR setting for 32bit guestsMarc Zyngier
Commit b856a59141b1 (arm/arm64: KVM: Reset the HCR on each vcpu when resetting the vcpu) moved the init of the HCR register to happen later in the init of a vcpu, but left out the fixup done in kvm_reset_vcpu when preparing for a 32bit guest. As a result, the 32bit guest is run as a 64bit guest, but the rest of the kernel still manages it as a 32bit. Fun follows. Moving the fixup to vcpu_reset_hcr solves the problem for good. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-12arm64: KVM: Fix TLB invalidation by IPA/VMIDMarc Zyngier
It took about two years for someone to notice that the IPA passed to TLBI IPAS2E1IS must be shifted by 12 bits. Clearly our reviewing is not as good as it should be... Paper bag time for me. Reported-by: Mario Smarduch <m.smarduch@samsung.com> Tested-by: Mario Smarduch <m.smarduch@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-12xen: check for zero sized area when invalidating memoryJuergen Gross
With the introduction of the linear mapped p2m list setting memory areas to "invalid" had to be delayed. When doing the invalidation make sure no zero sized areas are processed. Signed-off-by: Juegren Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12xen: use correct type for physical addressesJuergen Gross
When converting a pfn to a physical address be sure to use 64 bit wide types or convert the physical address to a pfn if possible. Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12xen: correct race in alloc_p2m_pmd()Juergen Gross
When allocating a new pmd for the linear mapped p2m list a check is done for not introducing another pmd when this just happened on another cpu. In this case the old pte pointer was returned which points to the p2m_missing or p2m_identity page. The correct value would be the pointer to the found new page. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12xen: correct error for building p2m list on 32 bitsJuergen Gross
In xen_rebuild_p2m_list() for large areas of invalid or identity mapped memory the pmd entries on 32 bit systems are initialized wrong. Correct this error. Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12s390/uprobes: fix user space PER eventsJan Willeke
If uprobes are single stepped for example with gdb, the behavior should now be correct. Before this patch, when gdb was single stepping a uprobe, the result was a SIGILL. When PER is active for any storage alteration and a uprobe is hit, a storage alteration event is indicated. These over indications are filterd out by gdb, if no change has happened within the observed area. Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-12ARM: exynos_defconfig: Enable LM90 driverAndreas Faerber
multi_v7_defconfig has it as Y already, so build it in here, too, for consistency, and therefore build in HWMON as well. Signed-off-by: Andreas Faerber <afaerber@suse.de> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-12ARM: exynos_defconfig: Enable options for display panel supportJavier Martinez Canillas
Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-12powerpc: Work around gcc bug in current_thread_info()Michael Ellerman
In commit a3e5b356b3ab "powerpc: Don't use local named register variable in current_thread_info" Anton changed the way we did current_thread_info() to accommodate LLVM, and it was not meant to have any effect elsewhere. Unfortunately it has exposed a gcc bug, where r1 gets copied into another register and then gcc uses that register to restore the toc after a function call, even when that register is volatile and has been clobbered by the function call. We could revert Anton's patch, but it's not clear the original code is safe either, we may just have been lucky. The cleanest solution is to just use the existing CURRENT_THREAD_INFO() asm macro, and call it using inline asm. Segher points out we don't need volatile on the asm, if the result of the shift is unused it's fine for the compiler to elide it. Fixes: a3e5b356b3ab ("powerpc: Don't use local named register variable in current_thread_info") Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-12powernv: Fix OPAL tracepoint codeAnton Blanchard
Patch c49f63530bb6 ("powernv: Add OPAL tracepoints") has a spurious store to the stack: ld r12,opal_tracepoint_refcount@toc(r2); \ std r12,32(r1); \ The store was originally used to save the current tracepoint status so the entry and the exit tracepoints were always balanced. In the end I just created a separate path when tracepoints are enabled. The offset on the stack used for this store is not valid for ABIv2 and it causes strange issues. I noticed it because OPAL console input was broken. Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints") Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-11Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three small fixes from over the Christmas period, and wiring up the new execveat syscall for ARM" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region ARM: 8249/1: mm: dump: don't skip regions ARM: wire up execveat syscall
2015-01-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix with certain odd memory mappings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Use asm volatile in __getcpu x86/build: Clean auto-generated processor feature files x86: Fix mkcapflags.sh bash-ism x86: Fix step size adjustment during initial memory mapping x86_64, vdso: Fix the vdso address randomization algorithm
2015-01-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also some kernel side fixes: uncore PMU driver fix, user regs sampling fix and an instruction decoder fix that unbreaks PEBS precise sampling" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes perf/x86_64: Improve user regs sampling perf: Move task_pt_regs sampling into arch code x86: Fix off-by-one in instruction decoder perf hists browser: Fix segfault when showing callchain perf callchain: Free callchains when hist entries are deleted perf hists: Fix children sort key behavior perf diff: Fix to sort by baseline field by default perf list: Fix --raw-dump option perf probe: Fix crash in dwarf_getcfi_elf perf probe: Fix to fall back to find probe point in symbols perf callchain: Append callchains only when requested perf ui/tui: Print backtrace symbols when segfault occurs perf report: Show progress bar for output resorting
2015-01-11m68k: Wire up execveatGeert Uytterhoeven
Check success of execveat(3, '../execveat', 0)... [OK] Check success of execveat(5, 'execveat', 0)... [OK] Check success of execveat(6, 'execveat', 0)... [OK] Check success of execveat(-100, '/root/selftest-exec/exec/execveat', 0)... [OK] Check success of execveat(99, '/root/selftest-exec/exec/execveat', 0)... [OK] Check success of execveat(8, '', 4096)... [OK] Check success of execveat(17, '', 4096)... [OK] Check success of execveat(9, '', 4096)... [OK] Check success of execveat(14, '', 4096)... [OK] Check success of execveat(14, '', 4096)... [OK] Check success of execveat(15, '', 4096)... [OK] Check failure of execveat(8, '', 0) with ENOENT... [OK] Check failure of execveat(8, '(null)', 4096) with EFAULT... [OK] Check success of execveat(5, 'execveat.symlink', 0)... [OK] Check success of execveat(6, 'execveat.symlink', 0)... [OK] Check success of execveat(-100, '/root/selftest-exec/...xec/execveat.symlink', 0)... [OK] Check success of execveat(10, '', 4096)... [OK] Check success of execveat(10, '', 4352)... [OK] Check failure of execveat(5, 'execveat.symlink', 256) with ELOOP... [OK] Check failure of execveat(6, 'execveat.symlink', 256) with ELOOP... [OK] Check failure of execveat(-100, '/root/selftest-exec/exec/execveat.symlink', 256) with ELOOP... [OK] Check success of execveat(3, '../script', 0)... [OK] Check success of execveat(5, 'script', 0)... [OK] Check success of execveat(6, 'script', 0)... [OK] Check success of execveat(-100, '/root/selftest-exec/exec/script', 0)... [OK] Check success of execveat(13, '', 4096)... [OK] Check success of execveat(13, '', 4352)... [OK] Check failure of execveat(18, '', 4096) with ENOENT... [OK] Check failure of execveat(7, 'script', 0) with ENOENT... [OK] Check success of execveat(16, '', 4096)... [OK] Check success of execveat(16, '', 4096)... [OK] Check success of execveat(4, '../script', 0)... [OK] Check success of execveat(4, 'script', 0)... [OK] Check success of execveat(4, '../script', 0)... [OK] Check failure of execveat(4, 'script', 0) with ENOENT... [OK] Check failure of execveat(5, 'execveat', 65535) with EINVAL... [OK] Check failure of execveat(5, 'no-such-file', 0) with ENOENT... [OK] Check failure of execveat(6, 'no-such-file', 0) with ENOENT... [OK] Check failure of execveat(-100, 'no-such-file', 0) with ENOENT... [OK] Check failure of execveat(5, '', 4096) with EACCES... [OK] Check failure of execveat(5, 'Makefile', 0) with EACCES... [OK] Check failure of execveat(11, '', 4096) with EACCES... [OK] Check failure of execveat(12, '', 4096) with EACCES... [OK] Check failure of execveat(99, '', 4096) with EBADF... [OK] Check failure of execveat(99, 'execveat', 0) with EBADF... [OK] Check failure of execveat(8, 'execveat', 0) with ENOTDIR... [OK] Invoke copy of 'execveat' via filename of length 4093: Check success of execveat(19, '', 4096)... [OK] Check success of execveat(5, 'xxxxxxxxxxxxxxxxxxxx...yyyyyyyyyyyyyyyyyyyy', 0)... [OK] Invoke copy of 'script' via filename of length 4093: Check success of execveat(20, '', 4096)... [OK] Check success of execveat(5, 'xxxxxxxxxxxxxxxxxxxx...yyyyyyyyyyyyyyyyyyyy', 0)... [OK] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-01-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here is a handful of minor arm64 fixes discovered and fixed over the Christmas break. The main part is adding some missing #includes that we seem to be getting transitively but have started causing problems in -next. - Fix early mapping fixmap corruption by EFI runtime services - Fix __NR_compat_syscalls off-by-one - Add missing sanity checks for some 32-bit registers - Add some missing #includes which we get transitively - Remove unused prepare_to_copy() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: add missing call to early_ioremap_reset() arm64: fix missing asm/io.h include in kernel/smp_spin_table.c arm64: fix missing asm/alternative.h include in kernel/module.c arm64: fix missing linux/bug.h include in asm/arch_timer.h arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h arm64: sanity checks: add missing AArch32 registers arm64: Remove unused prepare_to_copy() arm64: Correct __NR_compat_syscalls for bpf
2015-01-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed memcg: fix destination cgroup leak on task charges migration mm: memcontrol: switch soft limit default back to infinity mm/debug_pagealloc: remove obsolete Kconfig options vfs: renumber FMODE_NONOTIFY and add to uniqueness check arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file MAINTAINERS: update rydberg's addresses mm: protect set_page_dirty() from ongoing truncation mm: prevent endless growth of anon_vma hierarchy exit: fix race between wait_consider_task() and wait_task_zombie() ocfs2: remove bogus check in dlm_process_recovery_data
2015-01-09ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile errorVictor Kamensky
In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled image failed to compile with the following error: arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function) It seems that '80d6b0c ARM: mm: allow text and rodata sections to be read-only' and 'ded9477 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE' commits crossed. 80d6b0c uses PMD_SECT_RDONLY macro but ded9477 renames it and uses software bits L_PMD_SECT_RDONLY instead. Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as ded9477 does in another places. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-09perf/x86/uncore/hsw-ep: Handle systems with only two SBOXesAndi Kleen
There was another report of a boot failure with a #GP fault in the uncore SBOX initialization. The earlier work around was not enough for this system. The boot was failing while trying to initialize the third SBOX. This patch detects parts with only two SBOXes and limits the number of SBOX units to two there. Stable material, as it affects boot problems on 3.18. Tested-by: Andreas Oehler <andreas@oehler-net.de> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1420583675-9163-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>