| Age | Commit message (Collapse) | Author |
|---|
|
The variable tfm_count is accessed by multiple threads without
locking. This patch converts it to an atomic_t.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AEAD algorithm implementors need to figure out a given algorithm's
IV size and maximum authentication size. During the transition
this is difficult to do as an algorithm could be new style or old
style.
This patch creates two helpers to make this easier.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a new AEAD IV generator echainiv. It is intended
to replace the existing skcipher IV generator eseqiv.
If the underlying AEAD algorithm is using the old AEAD interface,
then echainiv will simply use its IV generator.
Otherwise, echainiv will encrypt a counter just like eseqiv but
it'll first xor it against a previously stored IV similar to
chainiv.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a new IV generator seqniv which is identical to
seqiv except that it skips the IV when authenticating. This is
intended to be used by algorithms such as rfc4106 that does the
IV authentication implicitly.
Note that the code used for seqniv is in fact identical to the
compatibility case for seqiv.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts the seqiv IV generator to work with the new
AEAD interface where IV generators are just normal AEAD algorithms.
Full backwards compatibility is paramount at this point since
no users have yet switched over to the new interface. Nor can
they switch to the new interface until IV generation is fully
supported by it.
So this means we are adding two versions of seqiv alongside the
existing one. The first one is the one that will be used when
the underlying AEAD algorithm has switched over to the new AEAD
interface. The second one handles the current case where the
underlying AEAD algorithm still uses the old interface.
Both versions export themselves through the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a check for in scatterwalk_map_and_copy to avoid
copying from the same address to the same address. This is going
to be used for IV copying in AEAD IV generators.
There is no provision for partial overlaps.
This patch also uses the new scatterwalk_ffwd instead of doing
it by hand in scatterwalk_map_and_copy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes gcm use the default null skcipher instead of
allocating a new one for each tfm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a default null skcipher for users such as gcm
to perform copies on SG lists.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the basic structure of the new AEAD type. Unlike
the current version, there is no longer any concept of geniv. IV
generation will still be carried out by wrappers but they will be
normal AEAD algorithms that simply take the IPsec sequence number
as the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch is the first step in the introduction of a new AEAD
alg type. Unlike normal conversions this patch only renames the
existing aead_alg structure because there are external references
to it.
Those references will be removed after this patch.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The primary user of AEAD, IPsec includes the IV in the AD in
most cases, except where it is implicitly authenticated by the
underlying algorithm.
The way it is currently implemented is a hack because we pass
the data in piecemeal and the underlying algorithms try to stitch
them back up into one piece.
This is why this patch is adding a new interface that allows a
single SG list to be passed in that contains everything so the
algorithm implementors do not have to stitch.
The new interface accepts a single source SG list and a single
destination SG list. Both must be laid out as follows:
AD, skipped data, plain/cipher text, ICV
The ICV is not present from the source during encryption and from
the destination during decryption.
For the top-level IPsec AEAD algorithm the plain/cipher text will
contain the generated (or received) IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the scatterwalk_ffwd helper which can create an
SG list that starts in the middle of an existing SG list. The
new list may either be part of the existing list or be a chain
that latches onto part of the existing list.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type. Otherwise it leads to a crash when the spawn is
used.
This patch fixes it by switching over to crypto_grab_aead instead.
Fixes: 5d1d65f8bea6 ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type. Otherwise it leads to a crash when the spawn is
used.
This patch fixes it by switching over to crypto_grab_aead instead.
Fixes: 5d1d65f8bea6 ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes it.
Also minor updates to comments.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts the top-level aead interface to the new style.
All user-level AEAD interface code have been moved into crypto/aead.h.
The allocation/free functions have switched over to the new way of
allocating tfms.
This patch also removes the double indrection on setkey so the
indirection now exists only at the alg level.
Apart from these there are no user-visible changes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All AEAD implementations must include internal/aead.h in order
to access required helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All AEAD implementations must include internal/aead.h in order
to access required helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a new primitive crypto_grab_spawn which is meant
to replace crypto_init_spawn and crypto_init_spawn2. Under the
new scheme the user no longer has to worry about reference counting
the alg object before it is subsumed by the spawn.
It is pretty much an exact copy of crypto_grab_aead.
Prior to calling this function spawn->frontend and spawn->inst
must have been set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the crypto 842 compression alg to use the software 842 compression
and decompression library. Add the crypto driver_name as "842-generic".
Remove the fallback to LZO compression.
Previously, this crypto compression alg attemped 842 compression using
PowerPC hardware, and fell back to LZO compression and decompression if
the 842 PowerPC hardware was unavailable or failed. This should not
fall back to any other compression method, however; users of this crypto
compression alg can fallback if desired, and transparent fallback tricks
callers into thinking they are getting 842 compression when they actually
get LZO compression - the failure of the 842 hardware should not be
transparent to the caller.
The crypto compression alg for a hardware device also should not be located
in crypto/ so this is now a software-only implementation that uses the 842
software compression/decompression library.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds a couple of test cases for CRC32 (not CRC32c) to
ensure that the generic and arch specific implementations
are in sync.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the test manager, there are a number of if-statements with expressions of
the form !x == y that incur warnings with gcc-5 of the following form:
../crypto/testmgr.c: In function '__test_aead':
../crypto/testmgr.c:523:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
if (!ret == template[i].fail) {
^
By converting the 'fail' member of struct aead_testvec and struct
cipher_testvec to a bool, we can get rid of the warnings.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In testmgr, struct pcomp_testvec takes a non-const 'params' field, which is
pointed to a const deflate_comp_params or deflate_decomp_params object. With
gcc-5 this incurs the following warnings:
In file included from ../crypto/testmgr.c:44:0:
../crypto/testmgr.h:28736:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_comp_params,
^
../crypto/testmgr.h:28748:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_comp_params,
^
../crypto/testmgr.h:28776:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_decomp_params,
^
../crypto/testmgr.h:28800:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
.params = &deflate_decomp_params,
^
Fix this by making the parameters pointer const and constifying the things
that use it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit 59afdc7b32143528524455039e7557a46b60e4c8 ("crypto:
api - Move module sig ifdef into accessor function") broke the
build when modules are completely disabled because we directly
dereference module->name.
This patch fixes this by using the accessor function module_name.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
|
|
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
|
|
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
|
|
Now that all fips_enabled users are including linux/fips.h directly
instead of getting it through internal.h, we can remove the fips.h
inclusions from internal.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h which is reserved for
internal crypto API implementors.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is currently a large ifdef FIPS code section in proc.c.
Ostensibly it's there because the fips_enabled sysctl sits under
/proc/sys/crypto. However, no other crypto sysctls exist.
In fact, the whole ethos of the crypto API is against such user
interfaces so this patch moves all the FIPS sysctl code over to
fips.c.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The header file internal.h is only meant for internal crypto API
implementors such as rng.c. So fips has no business in including
it.
This patch removes that inclusions and instead adds inclusions of
the actual features used by fips.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes the unnecessary CRYPTO_FIPS ifdef from
drbg_healthcheck_sanity so that the code always gets checked
by the compiler.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
|
|
Currently we're hiding mod->sig_ok under an ifdef in open code.
This patch adds a module_sig_ok accessor function and removes that
ifdef.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The function crypto_ahash_init can also be asynchronous just
like update and final. So all callers must be able to handle
an async return.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If we allocate a seed on behalf ot the user in crypto_rng_reset,
we must ensure that it is zeroed afterwards or the RNG may be
compromised.
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that crypto_rng_reset takes a const argument, we no longer
need to cast away the const qualifier.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
