summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2013-01-04Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / scan: Do not use dummy HID for system bus ACPI nodes ACPI / power: Remove useless message from device registering routine ACPI / glue: Update DBG macro to include KERN_DEBUG ACPI / PM: Do not apply ACPI_SUCCESS() to acpi_bus_get_device() result ACPI / memhotplug: remove redundant logic of acpi memory hotadd ACPI / APEI: Fix the returned value in erst_dbg_read
2013-01-04ACPI / scan: Do not use dummy HID for system bus ACPI nodesRafael J. Wysocki
At one point acpi_device_set_id() checks if acpi_device_hid(device) returns NULL, but that never happens, so system bus devices with an empty list of PNP IDs are given the dummy HID ("device") instead of the "system bus HID" ("LNXSYBUS"). Fix the code to use the right check. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: <stable@vger.kernel.org>
2013-01-03ACPI / power: Remove useless message from device registering routineRafael J. Wysocki
After commit 71fbad6 (PCI/ACPI: Notify PCI devices when their power resource is turned on) made acpi_pci_bind() call acpi_power_resource_register_device(), the debug message at the end of the latter appears in the kernel log for every PCI device that doesn't happen to have power resources assigned (which is the vast majority of them). However, this message is totally useless, because it doesn't even say which device it is about. Moreover, it is misleading, because it only means that the given device has no power resources, which isn't exceptional at all. Remove that useless message altogether and simplify acpi_power_resource_register_device() slightly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03ACPI / glue: Update DBG macro to include KERN_DEBUGJoe Perches
Currently these DBG statements are emitted at KERN_DEFAULT. Change the macro to emit at KERN_DEBUG. This can help avoid unexpected message interleaving. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03ACPI / PM: Do not apply ACPI_SUCCESS() to acpi_bus_get_device() resultRafael J. Wysocki
Since the return value of acpi_bus_get_device() is not of type acpi_status, ACPI_SUCCESS() should not be used for checking its return value. Fix that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-01-03ACPI / memhotplug: remove redundant logic of acpi memory hotaddLiu Jinsong
When memory hotadd, acpi_memory_enable_device has already been done at drv->ops.add (acpi_memory_device_add), no need to do it again at notify callback. At acpi_memory_enable_device, acpi_memory_get_device_resources is also a redundant action, since it has been done at drv->ops.add. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03ACPI / APEI: Fix the returned value in erst_dbg_readAdrian Huang
If the persistent store is empty initially, the function 'erst_dbg_read' returns a nonzero value. The better way is to return a zero indicating the read operation reaches EOF. Tested on two different servers. Signed-off-by: Adrian Huang <adrian.huang@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03ACPICA: Remove useless mini-C library.Lv Zheng
The mini-C library implementation is used by the embedded ACPICA users other than Linux. It was added to the kernel source to make it easier to incorporate future ACPICA changes, but as it turns our we can avoid carrying it thanks to some ACPICA release process tweaks, so remove drivers/acpi/acpica/utclib.c from the kernel source tree. [rjw: Modified the changelog slightly.] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-14Merge branch 'x86-acpi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ACPI update from Peter Anvin: "This is a patchset which didn't make the last merge window. It adds a debugging capability to feed ACPI tables via the initramfs. On a grander scope, it formalizes using the initramfs protocol for feeding arbitrary blobs which need to be accessed early to the kernel: they are fed first in the initramfs blob (lots of bootloaders can concatenate this at boot time, others can use a single file) in an uncompressed cpio archive using filenames starting with "kernel/". The ACPI maintainers requested that this patchset be fed via the x86 tree rather than the ACPI tree as the footprint in the general x86 code is much bigger than in the ACPI code proper." * 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: X86 ACPI: Use #ifdef not #if for CONFIG_X86 check ACPI: Fix build when disabled ACPI: Document ACPI table overriding via initrd ACPI: Create acpi_table_taint() function to avoid code duplication ACPI: Implement physical address table override ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas x86, acpi: Introduce x86 arch specific arch_reserve_mem_area() for e820 handling lib: Add early cpio decoder
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-12Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "Highlights: - Introduction of thermal policy support, together with three new thermal governors, including step_wise, user_space, fire_share. - Introduction of ST-Ericsson db8500_thermal driver and ST-Ericsson db8500_cpufreq_cooling driver. - Thermal Kconfig file and Makefile refactor. - Fixes for generic thermal layer, generic cpucooling, rcar thermal driver and Exynos thermal driver." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) Thermal: Fix DEFAULT_THERMAL_GOVERNOR Thermal: fix a NULL pointer dereference when generic thermal layer is built as a module thermal: rcar: add rcar_zone_to_priv() macro thermal: rcar: fixup the unit of temperature thermal: cpu cooling: allow module builds thermal: cpu cooling: use const parameter while registering Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. Thermal: Add ST-Ericsson DB8500 thermal driver. drivers/thermal/Makefile refactor Exynos: Add missing dependency Refactor drivers/thermal/Kconfig thermal: cpu_cooling: Make 'notify_device' static Thermal: Remove the cooling_cpufreq_list. Thermal: fix bug of counting cpu frequencies. Thermal: add indent for code alignment. thermal: rcar_thermal: remove explicitly used devm_kfree/iounap() thermal: user_space: Add missing static storage class specifiers thermal: fair_share: Add missing static storage class specifiers thermal: step_wise: Add missing static storage class specifiers Thermal: Fix oops and unlocking in thermal_sys.c ...
2012-12-12Merge tag 'please-pull-einj-fix-for-acpi5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull ACPI5 error injection fix from Tony Luck: "Trivial fix for error injection code using ACPI5 version of EINJ" * tag 'please-pull-einj-fix-for-acpi5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: ACPI, APEI, EINJ: Add missed ACPI5 support for error trigger table
2012-12-12Merge tag 'please-pull-pstore_mevent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore fixes from Tony Luck: "Patch series to allow EFI variable backend to pstore to hold multiple records." * tag 'please-pull-pstore_mevent' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: efi_pstore: Add a format check for an existing variable name at erasing time efi_pstore: Add a format check for an existing variable name at reading time efi_pstore: Add a sequence counter to a variable name efi_pstore: Add ctime to argument of erase callback efi_pstore: Remove a logic erasing entries from a write callback to hold multiple logs efi_pstore: Add a logic erasing entries to an erase callback efi_pstore: Check remaining space with QueryVariableInfo() before writing data
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-12-07Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: pnpacpi: fix incorrect TEST_ALPHA() test ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000 ACPI : do not use Lid and Sleep button for S5 wakeup
2012-12-07Merge branch 'acpi-enumeration'Rafael J. Wysocki
* acpi-enumeration: ACPI: add Haswell LPSS devices to acpi_platform_device_ids list ACPI: add documentation about ACPI 5 enumeration
2012-12-07ACPI: add Haswell LPSS devices to acpi_platform_device_ids listMika Westerberg
All devices behind Haswell LPSS (Low Power Subsystem) should be represented as platform devices so add them to the acpi_platform_device_ids list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-07ACPI, APEI, EINJ: Add missed ACPI5 support for error trigger tableChen Gong
To handle error trigger table correctly, memory region must be removed from request region. We had a series of patches to do this culminating in: commit b4e008dc5 ACPI, APEI, EINJ, Refine the fix of resource conflict but when ACPI5 support was added, we missed updating this area. So when using EINJ table on an ACPI5 enabled machine, we get following error: APEI: Can not request [mem 0x526b80000-0x526b80007] for APEI EINJ Trigger registers Fix this by checking for the acpi5 case and using the same code that was added earlier. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-12-04ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000Zhang Rui
Or else the laptop will boot with a dimmed screen. References: https://bugzilla.kernel.org/show_bug.cgi?id=51141 Tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-04ACPI : do not use Lid and Sleep button for S5 wakeupZhang Rui
When system enters power off, the _PSW of Lid device is enabled. But this may cause the system to reboot instead of power off. A proper way to fix this is to always disable lid wakeup capability for S5. References: https://bugzilla.kernel.org/show_bug.cgi?id=35262 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-04Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
2012-11-30ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklistLan Tianyu
The ACPI video driver can't control backlight correctly on Asus UL30VT. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30VT" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30VT" rather than ACPI video driver. References: https://bugzilla.kernel.org/show_bug.cgi?id=32592 Reported-by: Alex Williamson <alex.williamson@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-30ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is setZhang Rui
The current acpisleep DMI checks only run when CONFIG_SUSPEND is set. And this may break hibernation on some platforms when CONFIG_SUSPEND is cleared. Move acpisleep DMI check into #ifdef CONFIG_ACPI_SLEEP instead. [rjw: Added acpi_sleep_dmi_check() and rebased on top of earlier patches adding entries to acpisleep_dmi_table[].] References: https://bugzilla.kernel.org/show_bug.cgi?id=45921 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-29Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: Measure idle state durations with monotonic clock cpuidle: fix a suspicious RCU usage in menu governor cpuidle: support multiple drivers cpuidle: prepare the cpuidle core to handle multiple drivers cpuidle: move driver checking within the lock section cpuidle: move driver's refcount to cpuidle cpuidle: fixup device.h header in cpuidle.h cpuidle / sysfs: move structure declaration into the sysfs.c file cpuidle: Get typical recent sleep interval cpuidle: Set residency to 0 if target Cstate not enter cpuidle: Quickly notice prediction failure in general case cpuidle: Quickly notice prediction failure for repeat mode cpuidle / sysfs: move kobj initialization in the syfs file cpuidle / sysfs: change function parameter
2012-11-29Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: (38 commits) ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device() ACPI: Fix logging when no pci_irq is allocated ACPI: Update Dock hotplug error messages ACPI: Update Container hotplug error messages ACPI: Update Memory hotplug error messages ACPI: Update CPU hotplug error messages ACPI: Add acpi_handle_<level>() interfaces ACPI: remove use of __devexit ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist. ACPI / battery: Correct battery capacity values on Thinkpads Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info" ACPI: create _SUN sysfs file ACPI / memhotplug: bind the memory device when the driver is being loaded ACPI / memhotplug: don't allow to eject the memory device if it is being used ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug ACPI / memhotplug: deal with eject request in hotplug queue ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove() ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device ... Conflicts: include/linux/acpi.h (two additions at the end of the same file)
2012-11-29Merge branch 'acpica'Rafael J. Wysocki
* acpica: (26 commits) ACPICA: Update version to 20121018 ACPICA: AcpiGetObjectInfo: Add support for ACPI 5 _SUB method ACPICA: Update for 64-bit generation of recent error message changes ACPICA: Fix externalize name to complete migration to ACPI_MOVE_NAME ACPICA: Add starting offset parameter to common dump buffer routine ACPICA: Deploy ACPI_MOVE_NAME across ACPICA source base ACPICA: Update support for ACPI 5 MPST table ACPICA: Enhance error reporting for invalid opcodes and bad ACPI_NAMEs ACPICA: Add ACPI_MOVE_NAME macro to optimize 4-byte ACPI_NAME copies ACPICA: AcpiExec: Improve algorithm for tracking memory leaks ACPICA: Add debug print message for mutex objects that are force-released ACPICA: Resource Mgr: Small fix for buffer size calculation ACPICA: Remove extra spaces after periods in the Intel license ACPICA: Remove extra spaces after periods within comments ACPICA: Update local C library module comments for ASCII table ACPICA: Fix for predefined name loop during ACPICA initialization ACPICA: Fix some typos in comments ACPICA: ACPICA core: Cleanup empty lines at file start and end ACPICA: Audit/update for ACPICA return macros and debug depth counter ACPICA: Fix unmerged acmacros.h divergences. ...
2012-11-28acpi: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fixZhang Rui
On some platforms, _TMP and _CRT/_HOT/_PSV/_ACx have dependency. And there is no way for OS to detect this dependency. commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5 shows us a problem that _TMP must be evaluate after _CRT/_HOT/_PSV/_ACx, or else firmware will shutdown the system. But the machine in https://bugzilla.kernel.org/show_bug.cgi?id=43284 shows us that _PSV would return valid value only if _TMP has been evaluated once. With this patch, all of the control methods will be evaluated once, in the _CRT/_HOT/_PSV/_CRT/_TMP order, before they are actually used. [rjw: Added a local variable for the handle and modified the loop slightly.] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: katabami <katabami@lavabit.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpuidle: Measure idle state durations with monotonic clockJulius Werner
Many cpuidle drivers measure their time spent in an idle state by reading the wallclock time before and after idling and calculating the difference. This leads to erroneous results when the wallclock time gets updated by another processor in the meantime, adding that clock adjustment to the idle state's time counter. If the clock adjustment was negative, the result is even worse due to an erroneous cast from int to unsigned long long of the last_residency variable. The negative 32 bit integer will zero-extend and result in a forward time jump of roughly four billion milliseconds or 1.3 hours on the idle state residency counter. This patch changes all affected cpuidle drivers to either use the monotonic clock for their measurements or make use of the generic time measurement wrapper in cpuidle.c, which was already working correctly. Some superfluous CLIs/STIs in the ACPI code are removed (interrupts should always already be disabled before entering the idle function, and not get reenabled until the generic wrapper has performed its second measurement). It also removes the erroneous cast, making sure that negative residency values are applied correctly even though they should not appear anymore. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27ACPI: remove unnecessary INIT_LIST_HEADAndy Shevchenko
There is no need to initialize the node before appending it to the list. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27ACPI / platform: include missed header into acpi_platform.cAndy Shevchenko
The internal.h declares the acpi_create_platform_device(). Without that include we get a following warning: drivers/acpi/acpi_platform.c:133:24: warning: symbol 'acpi_create_platform_device' was not declared. Should it be static? Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27Merge branch 'acpi-dev-pm' into acpi-enumerationRafael J. Wysocki
Subsequent commits in this branch will depend on 'acpi-dev-pm' material.
2012-11-27efi_pstore: Add a sequence counter to a variable nameSeiji Aguchi
[Issue] Currently, a variable name, which identifies each entry, consists of type, id and ctime. But if multiple events happens in a short time, a second/third event may fail to log because efi_pstore can't distinguish each event with current variable name. [Solution] A reasonable way to identify all events precisely is introducing a sequence counter to the variable name. The sequence counter has already supported in a pstore layer with "oopscount". So, this patch adds it to a variable name. Also, it is passed to read/erase callbacks of platform drivers in accordance with the modification of the variable name. <before applying this patch> a variable name of first event: dump-type0-1-12345678 a variable name of second event: dump-type0-1-12345678 type:0 id:1 ctime:12345678 If multiple events happen in a short time, efi_pstore can't distinguish them because variable names are same among them. <after applying this patch> it can be distinguishable by adding a sequence counter as follows. a variable name of first event: dump-type0-1-1-12345678 a variable name of Second event: dump-type0-1-2-12345678 type:0 id:1 sequence counter: 1(first event), 2(second event) ctime:12345678 In case of a write callback executed in pstore_console_write(), "0" is added to an argument of the write callback because it just logs all kernel messages and doesn't need to care about multiple events. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-11-27efi_pstore: Add ctime to argument of erase callbackSeiji Aguchi
[Issue] Currently, a variable name, which is used to identify each log entry, consists of type, id and ctime. But an erase callback does not use ctime. If efi_pstore supported just one log, type and id were enough. However, in case of supporting multiple logs, it doesn't work because it can't distinguish each entry without ctime at erasing time. <Example> As you can see below, efi_pstore can't differentiate first event from second one without ctime. a variable name of first event: dump-type0-1-12345678 a variable name of second event: dump-type0-1-23456789 type:0 id:1 ctime:12345678, 23456789 [Solution] This patch adds ctime to an argument of an erase callback. It works across reboots because ctime of pstore means the date that the record was originally stored. To do this, efi_pstore saves the ctime to variable name at writing time and passes it to pstore at reading time. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-11-26ACPI / PM: Allow attach/detach routines to change device power statesRafael J. Wysocki
Make it possible to ask the routines used for adding/removing devices to/from the general ACPI PM domain, acpi_dev_pm_attach() and acpi_dev_pm_detach(), respectively, to change the power states of devices so that they are put into the full-power state automatically by acpi_dev_pm_attach() and into the lowest-power state available automatically by acpi_dev_pm_detach(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-23ACPI: add SDHCI to ACPI platform devicesAdrian Hunter
Add the generic ACPI SDHCI device ID to acpi_platform_device_ids[] to make the ACPI core create a platform device object for the ACPI device node of that ID. [rjw: Added the changelog.] Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-23i2c / ACPI: add ACPI enumeration supportMika Westerberg
ACPI 5 introduced I2cSerialBus resource that makes it possible to enumerate and configure the I2C slave devices behind the I2C controller. This patch adds helper functions to support I2C slave enumeration. An ACPI enabled I2C controller driver only needs to call acpi_i2c_register_devices() in order to get its slave devices enumerated, created and bound to the corresponding ACPI handle. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-22ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device()Cyril Roelandt
The LEN variable is unsigned, therefore checking whether it is less than 0 is useless. Also drop the LEN variable, since the COUNT parameter can be used instead. [rjw: Changed the subject.] Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Fix logging when no pci_irq is allocatedJoe Perches
Work around a defect in the printk subsystem introduced by a logging change. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI / PM: Introduce os_accessible flag for power_stateAaron Lu
Currently we have valid flag to represent if this ACPI device power state is valid. A device power state is valid does not necessarily mean we, as OSPM, has a mean to put the device into that power state, e.g. D3 cold is always a valid power state for any ACPI device, but if there is no _PS3 or _PRx for this device, we can't really put that device into D3 cold power state. The same is true for D0 power state. So here comes the os_accessible flag, which is only set if the device has provided us the required means to put it into that power state, e.g. if we have _PS3 or _PRx, we can put the device into D3 cold state and thus, D3 cold power state's os_accessible flag will be set in this case. And a new wrapper inline function is added to be used to check if firmware has provided us a way to power off the device during runtime. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Update Dock hotplug error messagesToshi Kani
Updated Dock hotplug error messages with acpi_handle_<level>() and pr_<level>(). Replaced acpi_get_name() & kfree() with apci_handle_<level>(). Added error status to the messages where needed. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Update Container hotplug error messagesToshi Kani
Updated Container hotplug error messages with acpi_handle_<level>() and pr_<level>(). Removed an unnecessary check to the device arg in acpi_container_add(). Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Update Memory hotplug error messagesToshi Kani
Updated Memory hotplug error messages with acpi_handle_<level>(), dev_<level>() and pr_<level>(). Added missing "\n". Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Update CPU hotplug error messagesToshi Kani
Updated CPU hotplug error messages with acpi_handle_<level>(), dev_<level>() and pr_<level>(). Modified some messages for clarity. Added error status / id info to the messages where needed. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: Add acpi_handle_<level>() interfacesToshi Kani
This patch introduces acpi_handle_<level>(), where <level> is a kernel message level such as err/warn/info, to support improved logging messages for ACPI, esp. hot-plug operations. acpi_handle_<level>() appends "ACPI" prefix and ACPI object path to the messages. This improves diagnosis of hotplug operations since an error message in a log file identifies an object that caused an issue. This interface acquires the global namespace mutex to obtain an object path. In interrupt context, it shows the object path as <n/a>. acpi_handle_<level>() takes acpi_handle as an argument, which is passed to ACPI hotplug notify handlers from the ACPICA. Therefore, it is always available unlike other kernel objects, such as device. For example: acpi_handle_err(handle, "Device don't exist, dropping EJECT\n"); logs an error message like this at KERN_ERR. ACPI: \_SB_.SCK4.CPU4: Device don't exist, dropping EJECT ACPI hot-plug drivers can use acpi_handle_<level>() when they need to identify a target ACPI object path in their messages, such as error cases. The usage model is similar to dev_<level>(). acpi_handle_<level>() can be used when a device is not created or is invalid during hot-plug operations. ACPI object path is also consistent on the platform, unlike device name that gets incremented over hotplug operations. ACPI drivers should use dev_<level>() when a device object is valid. Device name provides more user friendly information, and avoids acquiring the global ACPI namespace mutex. ACPI drivers also continue to use pr_<level>() when they do not need to specify device information, such as boot-up messages. Note: ACPI_[WARNING|INFO|ERROR]() are intended for the ACPICA and are not associated with the kernel message level. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-21ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.Lan Tianyu
Sony Vaio VPCEB1S1E does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=48781 Reported-by: Sébastien Wilmet <swilmet@gnome.org> Cc: <stable@vger.kernel.org> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-20ACPI / platform: Initialize ACPI handles of platform devices in advanceRafael J. Wysocki
The current platform device creation and registration code in acpi_create_platform_device() is quite convoluted. This function takes an ACPI device node as an argument and eventually calls platform_device_register_resndata() to create and register a platform device object on the basis of the information contained in that code. However, it doesn't associate the new platform device with the ACPI node directly, but instead it relies on acpi_platform_notify(), called from within device_add(), to find that ACPI node again with the help of acpi_platform_find_device() and acpi_platform_match() and then attach the new platform device to it. This causes an additional ACPI namespace walk to happen and is clearly suboptimal. Use the observation that it is now possible to initialize the ACPI handle of a device before calling device_add() for it to make this code more straightforward. Namely, add a new field to struct platform_device_info allowing us to pass the ACPI handle of interest to platform_device_register_full(), which will then use it to initialize the new device's ACPI handle before registering it. This will cause acpi_platform_notify() to use the ACPI handle from the device structure directly instead of using the .find_device() routine provided by the device's bus type. In consequence, acpi_platform_bus, acpi_platform_find_device(), and acpi_platform_match() are not necessary any more, so remove them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-20ACPI / driver core: Introduce struct acpi_dev_node and related macrosRafael J. Wysocki
To avoid adding an ACPI handle pointer to struct device on architectures that don't use ACPI, or generally when CONFIG_ACPI is not set, in which cases that pointer is useless, define struct acpi_dev_node that will contain the handle pointer if CONFIG_ACPI is set and will be empty otherwise and use it to represent the ACPI device node field in struct device. In addition to that define macros for reading and setting the ACPI handle of a device that don't generate code when CONFIG_ACPI is unset. Modify the ACPI subsystem to use those macros instead of referring to the given device's ACPI handle directly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>