summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2016-08-06Merge tag 'acpi-extra-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Two more fixes in ACPI drivers, one in the ACPI EC driver (stable-candidate) and one in the ACPI button driver. Specifics: - An ACPI EC driver fix from the 4.3 cycle may cause the ACPICA's method reentrancy limit to be exceeded for a _Qxx method due to a large number of concurrent EC operations, so prevent that from happening by moving the EC handling into a separate workqueue with a limit on the number of concurrently executed work items (Lv Zheng) - Fix the cleanup code in the ACPI button driver that forgets to clear two variables on exit which causes an error to occur on the next attmpt to load the driver (Benjamin Tissoires)" * tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx ACPI / button: remove pointer to old lid_sysfs on unbind
2016-08-05Merge branches 'acpi-ec' and 'acpi-button'Rafael J. Wysocki
* acpi-ec: ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx * acpi-button: ACPI / button: remove pointer to old lid_sysfs on unbind
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-08-04ACPI / EC: Work around method reentrancy limit in ACPICA for _QxxLv Zheng
A regression is caused by the following commit: Commit: 02b771b64b73226052d6e731a0987db3b47281e9 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b64b73 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
2016-08-02ACPI / button: remove pointer to old lid_sysfs on unbindBenjamin Tissoires
When we removed the procfs dir on error or if the driver is unbound, the two variables acpi_lid_dir and acpi_button_dir were not reset. On the next rebind, those static variables were not null and we couldn't re-register the device again. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas
Conflicts: drivers/nvme/host/pci.c
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-29Merge tag 'libnvdimm-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...
2016-07-27Merge tag 'for-linus-4.8-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.8-rc0: - ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places" * tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits) xen: add static initialization of steal_clock op to xen_time_ops xen/pvhvm: run xen_vcpu_setup() for the boot CPU xen/evtchn: use xen_vcpu_id mapping xen/events: fifo: use xen_vcpu_id mapping xen/events: use xen_vcpu_id mapping in events_base x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op xen: introduce xen_vcpu_id mapping x86/acpi: store ACPI ids from MADT for future usage x86/xen: update cpuid.h from Xen-4.7 xen/evtchn: add IOCTL_EVTCHN_RESTRICT xen-blkback: really don't leak mode property xen-blkback: constify instance of "struct attribute_group" xen-blkfront: prefer xenbus_scanf() over xenbus_gather() xen-blkback: prefer xenbus_scanf() over xenbus_gather() xen: support runqueue steal time on xen arm/xen: add support for vm_assist hypercall xen: update xen headers xen-pciback: drop superfluous variables xen-pciback: short-circuit read path used for merging write values ...
2016-07-27Merge tag 'pstore-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore subsystem updates from Kees Cook: "This expands the supported compressors, fixes some bugs, and finally adds DT bindings" * tag 'pstore-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: add Device Tree bindings efi-pstore: implement efivars_pstore_exit() pstore: drop file opened reference count pstore: add lzo/lz4 compression support pstore: Cleanup pstore_dump() pstore: Enable compression on normal path (again) ramoops: Only unregister when registered
2016-07-27Merge tag 'acpi-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "The new feaures here are the support for ACPI overlays (allowing ACPI tables to be loaded at any time from EFI variables or via configfs) and the LPI (Low-Power Idle) support. Also notable is the ACPI-based NUMA support for ARM64. Apart from that we have two new drivers, for the DPTF (Dynamic Power and Thermal Framework) power participant device and for the Intel Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for the Boot Error Record Table (BERT) in APEI and support for platform-initiated graceful shutdown. Plus two new pieces of documentation and usual assorted fixes and cleanups in quite a few places. Specifics: - Support for ACPI SSDT overlays allowing Secondary System Description Tables (SSDTs) to be loaded at any time from EFI variables or via configfs (Octavian Purdila, Mika Westerberg). - Support for the ACPI LPI (Low-Power Idle) feature introduced in ACPI 6.0 and allowing processor idle states to be represented in ACPI tables in a hierarchical way (with the help of Processor Container objects) and support for ACPI idle states management on ARM64, based on LPI (Sudeep Holla). - General improvements of ACPI support for NUMA and ARM64 support for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter). - General improvements of the ACPI table upgrade mechanism and ARM64 support for that feature (Aleksey Makarov, Jon Masters). - Support for the Boot Error Record Table (BERT) in APEI and improvements of kernel messages printed by the error injection code (Huang Ying, Borislav Petkov). - New driver for the Intel Broxton WhiskeyCove PMIC operation region and support for the REGS operation region on Broxton, PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker). - New driver for the power participant device which is part of the Dynamic Power and Thermal Framework (DPTF) and DPTF-related code reorganization (Srinivas Pandruvada). - Support for the platform-initiated graceful shutdown feature introduced in ACPI 6.1 (Prashanth Prakash). - ACPI button driver update related to lid input events generated automatically on initialization and system resume that have been problematic for some time (Lv Zheng). - ACPI EC driver cleanups (Lv Zheng). - Documentation of the ACPICA release automation process and the in-kernel ACPI AML debugger (Lv Zheng). - New blacklist entry and two fixes for the ACPI backlight driver (Alex Hung, Arvind Yadav, Ralf Gerbig). - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker). - ACPI CPPC code changes to make it more robust against possible defects in ACPI tables and new symbol definitions for PCC (Hoan Tran). - System reboot code modification to execute the ACPI _PTS (Prepare To Sleep) method in addition to _TTS (Ocean He). - ACPICA-related change to carry out lock ordering checks in ACPICA if ACPICA debug is enabled in the kernel (Lv Zheng). - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He, Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)" * tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE ACPI / DPTF: move int340x_thermal.c to the DPTF folder ACPI / DPTF: Add DPTF power participant driver ACPI / lpat: make it explicitly non-modular ACPI / dock: make dock explicitly non-modular ACPI / PCI: make pci_slot explicitly non-modular ACPI / PMIC: remove modular references from non-modular code ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel ACPI: Rename configfs.c to acpi_configfs.c to prevent link error ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation ACPI: add support for loading SSDTs via configfs ACPI: add support for configfs efi / ACPI: load SSTDs from EFI variables ...
2016-07-26Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - Intel-SoC enhancements (Andy Shevchenko) - Intel CPU symbolic model definition rework (Dave Hansen) - ... other misc changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/sfi: Enable enumeration of SD devices x86/pci: Use MRFLD abbreviation for Merrifield x86/platform/intel-mid: Make vertical indentation consistent x86/platform/intel-mid: Mark regulators explicitly defined x86/platform/intel-mid: Rename mrfl.c to mrfld.c x86/platform/intel-mid: Enable spidev on Intel Edison boards x86/platform/intel-mid: Extend PWRMU to support Penwell x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code x86/platform/intel-mid: Add pinctrl for Intel Merrifield x86/platform/intel-mid: Enable GPIO expanders on Edison x86/platform/intel-mid: Add Power Management Unit driver x86/platform/atom/punit: Enable support for Merrifield x86/platform/intel_mid_pci: Rework IRQ0 workaround x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal x86, mmc: Use Intel family name macros for mmc driver x86/intel_telemetry: Use Intel family name macros for telemetry driver x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver x86/platform: Use new Intel model number macros x86/intel_idle: Use Intel family macros for intel_idle ...
2016-07-25Merge tag 'v4.7' into for-linus/pstoreKees Cook
Linux 4.7
2016-07-25Merge branches 'acpi-drivers', 'acpi-misc' and 'acpi-tools'Rafael J. Wysocki
* acpi-drivers: ACPI / DPTF: move int340x_thermal.c to the DPTF folder ACPI / DPTF: Add DPTF power participant driver * acpi-misc: ACPI / lpat: make it explicitly non-modular ACPI / dock: make dock explicitly non-modular * acpi-tools: tools/acpi: use CROSS_COMPILE to define prefix
2016-07-25Merge branch 'acpi-pmic'Rafael J. Wysocki
* acpi-pmic: ACPI / PMIC: remove modular references from non-modular code ACPI / PMIC: intel: initialize result to 0 ACPI / PMIC: intel: add REGS operation region support ACPI / PMIC: Add opregion driver for Intel BXT WhiskeyCove PMIC ACPI / PMIC: modify the pen function signature to take bit field Conflicts: drivers/acpi/Makefile
2016-07-25Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'Rafael J. Wysocki
* acpi-processor: ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE * acpi-cppc: mailbox: pcc: Add PCC request and free channel declarations ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data ACPI: CPPC: Return error if _CPC is invalid on a CPU * acpi-apei: ACPI / APEI: Add Boot Error Record Table (BERT) support ACPI / einj: Make error paths more talkative ACPI / einj: Convert EINJ_PFX to proper pr_fmt * acpi-sleep: ACPI: Execute _PTS before system reboot
2016-07-25Merge branches 'acpi-ec', 'acpi-video', 'acpi-button' and 'acpi-thermal'Rafael J. Wysocki
* acpi-ec: ACPI / EC: Remove wrong ECDT correction quirks ACPI / EC: Cleanup boot EC code using acpi_ec_alloc() * acpi-video: ACPI / video: Dummy acpi_video_register should return error code ACPI / video: skip evaluating _DOD when it does not exist ACPI / video: Thinkpad X201 Tablet needs video_detect_force_video * acpi-button: ACPI / button: Add quirks for initial lid state notification ACPI / button: Refactor functions to eliminate redundant code ACPI / button: Remove initial lid state notification * acpi-thermal: ACPI / thermal: Remove create_workqueue()
2016-07-25Merge branches 'acpi-bus', 'acpi-pci', 'acpica' and 'acpi-doc'Rafael J. Wysocki
* acpi-bus: ACPI / bus: Support for platform initiated graceful shutdown ACPI / bus: Correct the comments about acpi_subsystem_init() ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error() * acpi-pci: ACPI / PCI: make pci_slot explicitly non-modular ACPI / PCI: pci_slot: Use generic pr_debug utility ACPI / PCI: pci_slot: Use more common logging style * acpica: ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel * acpi-doc: ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation
2016-07-25Merge branch 'acpi-tables'Rafael J. Wysocki
* acpi-tables: ACPI: Rename configfs.c to acpi_configfs.c to prevent link error ACPI: add support for loading SSDTs via configfs ACPI: add support for configfs efi / ACPI: load SSTDs from EFI variables spi / ACPI: add support for ACPI reconfigure notifications i2c / ACPI: add support for ACPI reconfigure notifications ACPI: add support for ACPI reconfiguration notifiers ACPI / scan: fix enumeration (visited) flags for bus rescans ACPI / documentation: add SSDT overlays documentation ACPI: ARM64: support for ACPI_TABLE_UPGRADE ACPI / tables: introduce ARCH_HAS_ACPI_TABLE_UPGRADE ACPI / tables: move arch-specific symbol to asm/acpi.h ACPI / tables: table upgrade: refactor function definitions ACPI / tables: table upgrade: use cacheable map for tables Conflicts: arch/arm64/include/asm/acpi.h
2016-07-25Merge branch 'acpi-numa'Rafael J. Wysocki
* acpi-numa: ACPI / NUMA: Enable ACPI based NUMA on ARM64 arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT ACPI / processor: Add acpi_map_madt_entry() ACPI / NUMA: Improve SRAT error detection and add messages ACPI / NUMA: Move acpi_numa_memory_affinity_init() to drivers/acpi/numa.c ACPI / NUMA: remove unneeded acpi_numa=1 ACPI / NUMA: move bad_srat() and srat_disabled() to drivers/acpi/numa.c x86 / ACPI / NUMA: cleanup acpi_numa_processor_affinity_init() arm64, NUMA: Cleanup NUMA disabled messages arm64, NUMA: rework numa_add_memblk() ACPI / NUMA: move acpi_numa_slit_init() to drivers/acpi/numa.c ACPI / NUMA: Move acpi_numa_arch_fixup() to ia64 only ACPI / NUMA: remove duplicate NULL check ACPI / NUMA: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI / NUMA: Use pr_fmt() instead of printk
2016-07-24Merge branch 'for-4.8/libnvdimm' into libnvdimm-for-nextDan Williams
2016-07-24nfit: do an ARS scrub on hitting a latent media errorVishal Verma
When a latent (unknown to 'badblocks') error is encountered, it will trigger a machine check exception. On a system with machine check recovery, this will only SIGBUS the process(es) which had the bad page mapped (as opposed to a kernel panic on platforms without machine check recovery features). In the former case, we want to trigger a full rescan of that nvdimm bus. This will allow any additional, new errors to be captured in the block devices' badblocks lists, and offending operations on them can be trapped early, avoiding machine checks. This is done by registering a callback function with the x86_mce_decoder_chain and calling the new ars_rescan functionality with the address in the mce notificatiion. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-24nfit: move to nfit/ sub-directoryDan Williams
With the arrival of x86-machine-check support the nfit driver will add a (conditionally-compiled) source file. Prepare for this by moving all nfit source to drivers/acpi/nfit/. This is pure code movement, no functional changes. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-24nfit, libnvdimm: allow an ARS scrub to be triggered on demandVishal Verma
Normally, an ARS (Address Range Scrub) only happens at boot/initialization time. There can however arise situations where a bus-wide rescan is needed - notably, in the case of discovering a latent media error, we should do a full rescan to figure out what other sectors are bad, and thus potentially avoid triggering an mce on them in the future. Also provide a sysfs trigger to start a bus-wide scrub. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: "This contains a regression fix for a problem that was introduced in v4.7-rc6. In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device- specific-method) format that the platform firmware implements for nvdimm devices. We initially fixed a regression in probing the QEMU DSM implementation by making acpi_check_dsm() tolerant of the way QEMU reports the "0 DSMs supported" condition. However, that broke HPE platforms since that tolerance caused the driver to mistakenly match the 1-zero-byte response those platforms give to "unknown" commands. Instead, we simply make the driver tolerant of not finding any supported DSMs. This has been tested to work with both QEMU and HPE platforms. This commit has appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: make DIMM DSMs optional
2016-07-22nfit, tools/testing/nvdimm/: unify shutdown pathsDan Williams
While testing the new on-demand ARS patches we discovered that differences between the nfit_test and normal nfit driver shutdown paths can leak resources. Unify the shutdown paths to trigger via a devm_ callback when the acpi_desc->dev is unbound from its driver. Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-22libnvdimm: move ->module to struct nvdimm_bus_descriptorDan Williams
Let the provider module be explicitly passed in rather than implicitly assumed by the module that calls nvdimm_bus_register(). This is in preparation for unifying the nfit and nfit_test driver teardown paths. Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21ACPI: enable ACPI_PROCESSOR_IDLE on ARM64Sudeep Holla
Now that ACPI processor idle driver supports LPI(Low Power Idle), lets enable ACPI_PROCESSOR_IDLE for ARM64 too. This patch just removes the IA64 and X86 dependency on ACPI_PROCESSOR_IDLE Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21ACPI / processor_idle: Add support for Low Power Idle(LPI) statesSudeep Holla
ACPI 6.0 introduced an optional object _LPI that provides an alternate method to describe Low Power Idle states. It defines the local power states for each node in a hierarchical processor topology. The OSPM can use _LPI object to select a local power state for each level of processor hierarchy in the system. They used to produce a composite power state request that is presented to the platform by the OSPM. Since multiple processors affect the idle state for any non-leaf hierarchy node, coordination of idle state requests between the processors is required. ACPI supports two different coordination schemes: Platform coordinated and OS initiated. This patch adds initial support for Platform coordination scheme of LPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATESudeep Holla
ACPI 6.0 adds a new method to specify the CPU idle states(C-states) called Low Power Idle(LPI) states. Since new architectures like ARM64 use only LPIs, introduce ACPI_PROCESSOR_CSTATE to encapsulate all the code supporting the old style C-states(_CST). This patch will help to extend the processor_idle module to support LPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21nfit: cleanup acpi_nfit_init calling conventionDan Williams
Pass the nfit buffer as a parameter rather than hanging it off of acpi_desc. Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21nfit: fix _FIT evaluation memory leak + use after freeDan Williams
acpi_evaluate_object() allocates memory. Free the buffer allocated during acpi_nfit_add(). In order for this memory to be freed acpi_nfit_init() needs to be converted to duplicate the nfit contents in its internal allocation. Use zero-length arrays to minimize the thrash with the rest of the nfit driver implementation. All of the add_<nfit-sub-table>() routines now validate a minimum table size and expect hotplugged tables to match the size of the original table to count as a duplicate. For variable length tables, like 'idt' and 'flush', we calculate the dynamic size. Note that hotplug by definition cannot change the interleave as it would cause data corruption of in-use namespaces. Cc: Vishal Verma <vishal.l.verma@intel.com> Reported-by: Xiao Guangrong <guangrong.xiao@intel.com> Reported-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21acpi, nfit: treat virtual ramdisk SPA as pmem regionLee, Chun-Yi
This patch adds logic to treat virtual ramdisk SPA as pmem region, then ramdisk's /dev/pmem* device can be mounted with iso9660. It's useful to work with the httpboot in EFI firmware to pull a remote ISO file to the local memory region for booting and installation. Wiki page of UEFI HTTPBoot with OVMF: https://en.opensuse.org/UEFI_HTTPBoot_with_OVMF The ramdisk function in EDK2/OVMF generates a ACPI0012 root device that it contains empty _STA but without _DSM: DefinitionBlock ("ssdt2.aml", "SSDT", 2, "INTEL ", "RamDisk ", 0x00001000) { Scope (\_SB) { Device (NVDR) { Name (_HID, "ACPI0012") // _HID: Hardware ID Name (_STR, Unicode ("NVDIMM Root Device")) // _STR: Description String Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } } In section 5.2.25.2 of ACPI 6.1 spec, it mentions that the "SPA Range Structure Index" of virtual SPA shall be set to zero. That means virtual SPA will not be associated by any NVDIMM region mapping. The VCD's SPA Range Structure in NFIT is similar to virtual disk region as following: [028h 0040 2] Subtable Type : 0000 [System Physical Address Range] [02Ah 0042 2] Length : 0038 [02Ch 0044 2] Range Index : 0000 [02Eh 0046 2] Flags (decoded below) : 0000 Add/Online Operation Only : 0 Proximity Domain Valid : 0 [030h 0048 4] Reserved : 00000000 [034h 0052 4] Proximity Domain : 00000000 [038h 0056 16] Address Range GUID : 77AB535A-45FC-624B-5560-F7B281D1F96E [048h 0072 8] Address Range Base : 00000000B6ABD018 [050h 0080 8] Address Range Length : 0000000005500000 [058h 0088 8] Memory Map Attribute : 0000000000000000 The way to not associate a SPA range is to never reference it from a "flush hint", "interleave", or "control region" table. After testing on OVMF, pmem driver can support the region that it doesn't assoicate to any NVDIMM mapping. So, treat VCD like pmem is a idea to get a pmem block device that it contains iso. v4: Instoduce nfit_spa_is_virtual() to check virtual ramdisk SPA and create pmem region. v3: To simplify patch, removed useless VCD region in libnvdimm. v2: Removed the code for setting VCD to a read-only region. Cc: Gary Lin <GLin@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21ACPI / DPTF: move int340x_thermal.c to the DPTF folderSrinivas Pandruvada
Since DPTF has its own folder under ACPI, move this file also there. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21ACPI / DPTF: Add DPTF power participant driverSrinivas Pandruvada
This driver adds support for Dynamic Platform and Thermal Framework (DPTF) Platform Power Participant device (INT3407) support. This participant is responsible for exposing platform telemetry such as: max_platform_power platform_power_source adapter_rating battery_steady_power charger_type These attributes are presented via sysfs interface under the INT3407 platform device: $ls /sys/bus/platform/devices/INT3407\:00/dptf_power/ adapter_rating_mw battery_steady_power_mw charger_type max_platform_power_mw platform_power_source ` ACPI methods description used in this driver: PMAX: Maximum platform power that can be supported by the battery in mW. PSRC: System charge source, 0x00 = DC 0x01 = AC 0x02 = USB 0x03 = Wireless Charger ARTG: Adapter rating in mW (Maximum Adapter power) Must be 0 if no AC adapter is plugged in. CTYP: Charger Type, Traditional : 0x01 Hybrid: 0x02 NVDC: 0x03 PBSS: Returns max sustained power for battery in milliWatts. The INT3407 also contains _BTS and _BIX objects, which are compliant to ACPI 5.0, specification. Those objects are already used by ACPI battery (PNP0C0A) driver and information about them is exported via Linux power supply class registration. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-19nfit: make DIMM DSMs optionalDan Williams
Commit 4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions implemented" attempted to fix a QEMU regression by supporting its usage of a zero-mask as a valid response to a DSM-family probe request. However, this behavior breaks HP platforms that return a zero-mask by default causing the probe to misidentify the DSM-family. Instead, the QEMU regression can be fixed by simply not requiring the DSM family to be identified. This effectively reverts commit 4995734e973a, and removes the DSM requirement from the init path. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Fixes: 4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented") Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com> Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-16ACPI / lpat: make it explicitly non-modularPaul Gortmaker
The Makefile for building this is "acpi-y" and so it is not built as a module. Hence including module.h and everything that comes with it just for the no-op MODULE_LICENSE is rather heavy handed. The license info is found at the top of the file, so we just remove the MODULE_LICENSE and the include of module.h We add an include of export.h since the file exports some symbols. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-16ACPI / dock: make dock explicitly non-modularPaul Gortmaker
The Kconfig for this file is: drivers/acpi/Kconfig:config ACPI_DOCK drivers/acpi/Kconfig: bool "Dock" ...and so it is not built as a module. Hence including module.h and everything that comes with it just for the no-op MODULE_LICENSE and friends is rather heavy handed. The license/author info is found at the top of the file, so we just remove the MODULE_LICENSE etc and the include of module.h The file does still have some module_param() so we add the right include for that infrastructure. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-16ACPI / PCI: make pci_slot explicitly non-modularPaul Gortmaker
The Kconfig for this file is: drivers/acpi/Kconfig:config ACPI_PCI_SLOT drivers/acpi/Kconfig: bool "PCI slot detection driver" ...and so it is not built as a module. Hence including module.h and everything that comes with it just for the no-op MODULE_LICENSE and friends is rather heavy handed. The license/author info is found at the top of the file, so we just remove the MODULE_LICENSE etc and the include of module.h We delete the DRIVER_VERSION macro as well since it is unused. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-16ACPI / PMIC: remove modular references from non-modular codePaul Gortmaker
The Kconfig currently controlling compilation of these files are: drivers/acpi/Kconfig:menuconfig PMIC_OPREGION drivers/acpi/Kconfig: bool "PMIC (Power Management Integrated Circuit) operation region support" drivers/acpi/Kconfig:config BXT_WC_PMIC_OPREGION drivers/acpi/Kconfig: bool "ACPI operation region support for BXT WhiskeyCove PMIC" drivers/acpi/Kconfig:config XPOWER_PMIC_OPREGION drivers/acpi/Kconfig: bool "ACPI operation region support for XPower AXP288 PMIC" ...meaning they currently are not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the code there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. One file was using module_init. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. In one case we replace the module.h with export.h since that file is exporting some symbols, but does not use __init. The other two are using __init and so module.h gets replaced with init.h there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-15ACPI/processor: Avoid STARTING/DYING actions in a more logical wayRichard Cochran
As part of the hotplug cleanup, the CPU_STARTING/DYING actions are going away soon. This driver needlessly uses those two macro, and so this patch replaces that code with something more sensible. Commit: 8da8373447d6a57a5a9f55233d35beb15d92d0d2 ("ACPI / processor: Fix STARTING/DYING action in acpi_cpu_soft_notify()") added checks for those two actions, because the notification callback can sleep, causing a hung CPU. This patch instead checks for the ONLINE/DEAD actions, which are the ones that are handled by the driver in the first place. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-acpi@vger.kernel.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153335.964962885@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13pmem: kill __pmem address spaceDan Williams
The __pmem address space was meant to annotate codepaths that touch persistent memory and need to coordinate a call to wmb_pmem(). Now that wmb_pmem() is gone, there is little need to keep this annotation. Cc: Christoph Hellwig <hch@lst.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-12Merge branches 'acpica-fixes' and 'acpi-ec-fixes'Rafael J. Wysocki
* acpica-fixes: Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis" Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading" Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering" * acpi-ec-fixes: ACPI / EC: Fix code ordering issue in ec_remove_handlers()
2016-07-11libnvdimm: introduce nvdimm_flush() and nvdimm_has_flush()Dan Williams
nvdimm_flush() is a replacement for the x86 'pcommit' instruction. It is an optional write flushing mechanism that an nvdimm bus can provide for the pmem driver to consume. In the case of the NFIT nvdimm-bus-provider nvdimm_flush() is implemented as a series of flush-hint-address [1] writes to each dimm in the interleave set (region) that backs the namespace. The nvdimm_has_flush() routine relies on platform firmware to describe the flushing capabilities of a platform. It uses the heuristic of whether an nvdimm bus provider provides flush address data to return a ternary result: 1: flush addresses defined 0: dimm topology described without flush addresses (assume ADR) -errno: no topology information, unable to determine flush mechanism The pmem driver is expected to take the following actions on this ternary result: 1: nvdimm_flush() in response to REQ_FUA / REQ_FLUSH and shutdown 0: do not set, WC or FUA on the queue, take no further action -errno: warn and then operate as if nvdimm_has_flush() returned '0' The caveat of this heuristic is that it can not distinguish the "dimm does not have flush address" case from the "platform firmware is broken and failed to describe a flush address". Given we are already explicitly trusting the NFIT there's not much more we can do beyond blacklisting broken firmwares if they are ever encountered. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm, nfit: move flush hint mapping to region-device driver-dataDan Williams
In preparation for triggering flushes of a DIMM's writes-posted-queue (WPQ) via the pmem driver move mapping of flush hint addresses to the region driver. Since this uses devm_nvdimm_memremap() the flush addresses will remain mapped while any region to which the dimm belongs is active. We need to communicate more information to the nvdimm core to facilitate this mapping, namely each dimm object now carries an array of flush hint address resources. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm, nfit: remove nfit_spa_map() infrastructureDan Williams
Now that all shared mappings are handled by devm_nvdimm_memremap() we no longer need nfit_spa_map() nor do we need to trigger a callback to the bus provider at region disable time. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic ↵Rafael J. Wysocki
table loading" Revert commit 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) that attempted to fix a deadlock issue introduced by a previous commit, but it led to a lock ordering inconsistency that caused further problems to appear. Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>