| Age | Commit message (Collapse) | Author |
|---|
|
SPC-3 defines SERVICE ACTION IN(12) and SERVICE ACTION IN(16).
So rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to be
consistent with SPC and to allow for better distinction.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Robert Elliott <elliott@hp.com>
Reviewed-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch contains several fixes for Scsi START_STOP_UNIT. The previous
code did not account for signed vs. unsigned arithmetic which resulted
in an invalid lowest power state caculation when the device only supports
1 power state.
The code for Power Condition == 2 (Idle) was not following the spec. The
spec calls for setting the device to specific power states, depending
upon Power Condition Modifier, without accounting for the number of
power states supported by the device.
The code for Power Condition == 3 (Standby) was using a hard-coded '0'
which is replaced with the macro POWER_STATE_0.
Signed-off-by: Dan McLeran <daniel.mcleran@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
The nvme-scsi file defined its own Log Page constant. Use the
newly-defined one from the header file instead.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
After skipping right-padded spaces, use the last four bytes of the
firmware revision when reporting the Inquiry Product Revision. These
are generally more indicative to what is running.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
This define isn't used, and any code that wanted to use it should use
NVME_FEAT_TEMP_THRESH instead.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
In GetLogPage the buffer size passed to device is a 0's based value.
Signed-off-by: Indraneel M <indraneel.m@samsung.com>
Reported-by: Shiro Itou <shiro.itou@outlook.com>
Reviewed-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Make the copyright dates accurate and remove the final paragraph that
includes the address of the FSF.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
For commands returned with failed status, queue these for resubmission
and continue retrying them until success or for a limited amount of
time. The final timeout was arbitrarily chosen so requests can't be
retried indefinitely.
Since these are requeued on the nvmeq that submitted the command, the
callbacks have to take an nvmeq instead of an nvme_dev as a parameter
so that we can use the locked queue to append the iod to retry later.
The nvme_iod conviently can be used to track how long we've been trying
to successfully complete an iod request. The nvme_iod also provides the
nvme prp dma mappings, so I had to move a few things around so we can
keep those mappings.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[fixed checkpatch issue with long line]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
dev->max_hw_sectors may be zero to indicate the device has no limit on
the number of sectors. nvme_trans_do_nvme_io() should use the software
limit, since this is guaranteed to be non-zero.
Reported-by: Mundu <mundu2510@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
This adds rcu protected access to a queue in the nvme IOCTL path
to fix potential races between a surprise removal and queue usage in
nvme_submit_sync_cmd. The fix holds the rcu_read_lock() here to prevent
the nvme_queue from freeing while this path is executing so it can't
sleep, and so this path will no longer wait for a available command
id should they all be in use at the time a passthrough IOCTL request
is received.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
For 32-bit versions of sg3-utils running on a 64-bit system. This is
mostly a copy from the relevent portions of fs/compat_ioctl.c, with
slight modifications for going through block_device_operations.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@linux.intel.com>
[fixed up CONFIG_COMPAT=n build problems]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Use kzalloc instead of kmalloc and a susbsequent memset.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
nvme_trans_modesel_get_mp() was defined with a unsigned return
type, but can return signed values.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
version.h header inclusion is not necessary as detected by
checkversion.pl.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Add definitions for the three Firmware Activate actions, and change the
SCSI translation code to construct the command into a temporary variable
instead of translating the endianness back-and-forth.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@linux.intel.com>
|
|
Translates a scsi unmap request from SG_IO ioctl to NVMe
data-set-management deallocate.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Fixes nvme queue usages in scsi-to-nvme translation code to not get
a queue more often than it is being put, and not use the queue in an
unsafe way without it being locked.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Sparse produced warnings for some instances of
mismatched types and direct userspace dereferences.
This patch fixes those for the scsi emulation layer.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
|
Introduce nvme_block_nr() to help convert sectors to block numbers.
This fixes an integer overflow in the SCSI conversion layer, and it's
slightly less typing than opencoding it.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
|
|
Translates SCSI commands in SG_IO ioctl to NVMe commands.
Uses the scsi-nvme translation spec from nvmexpress.org as reference.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
|
