summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2017-08-07ipmi/watchdog: fix watchdog timeout set on rebootValentin Vidic
commit 860f01e96981a68553f3ca49f574ff14fe955e72 upstream. systemd by default starts watchdog on reboot and sets the timer to ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces the timer to 120s which is not enough time to boot a Xen machine with a lot of RAM. As a result the machine is rebooted the second time during the long run of (XEN) Scrubbing Free RAM..... Fix this by setting the timer to 120s only if it was previously set to a low value. Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipmi:ssif: Add missing unlock in error branchCorey Minyard
commit 4495ec6d770e1bca7a04e93ac453ab6720c56c5d upstream. When getting flags, a response to a different message would result in a deadlock because of a missing unlock. Add that unlock and a comment. Found by static analysis. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipmi: use rcu lock around call to intf->handlers->sender()Tony Camuso
commit cdea46566bb21ce309725a024208322a409055cc upstream. A vendor with a system having more than 128 CPUs occasionally encounters the following crash during shutdown. This is not an easily reproduceable event, but the vendor was able to provide the following analysis of the crash, which exhibits the same footprint each time. crash> bt PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5" #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0 #3 [ffff88085c143c10] oops_end at ffffffff8168ef88 #4 [ffff88085c143c38] no_context at ffffffff8167ebb3 #5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49 #6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3 #7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e #8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5 #9 [ffff88085c143d70] page_fault at ffffffff8168e188 [exception RIP: unknown or invalid address] RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206 RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8 RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00 RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000 R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8 R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <IRQ stack> [exception RIP: cpuidle_enter_state+82] RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202 RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018 RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16 RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018 R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20 R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 This is the corresponding stack trace It has crashed because the area pointed with RIP extracted from timer element is already removed during a shutdown process. The function is smi_timeout(). And we think ffff8810588b5a00 in RDX is a parameter struct smi_info crash> rd ffff8810588b5a00 20 ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............ ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T..... ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S..... ffff8810588b5a50: 0000000000000000 0000000100000001 ................ ffff8810588b5a60: 0000000000000000 0000000000000e00 ................ ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S..... ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S..... ffff8810588b5a90: 0000000500000002 0000000000000000 ................ Unfortunately the top of this area is already detroyed by someone. But because of two reasonns we think this is struct smi_info 1) The address included in between ffff8810588b5a70 and ffff8810588b5a80: are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0 2) We've found the area which point this. It is offset 0x68 of ffff880859df4000 crash> rd ffff880859df4000 100 ffff880859df4000: 0000000000000000 0000000000000001 ................ ffff880859df4010: ffffffffa0535290 dead000000000200 .RS............. ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y.... ffff880859df4030: 0000000000000002 0000000000100010 ................ ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y.... ffff880859df4050: 0000000000000000 0000000000000000 ................ ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X.... ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y.... If we regards it as struct ipmi_smi in shutdown process it looks consistent. The remedy for this apparent race is affixed below. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> This was first introduced in 7ea0ed2b5be817 ipmi: Make the message handler easier to use for SMI interfaces where some code was moved outside of the rcu_read_lock() and the lock was not added. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-07-15tpm: Issue a TPM2_Shutdown for TPM2 devices.Josh Zimmerman
commit d1bd4a792d3961a04e6154118816b00167aad91a upstream. If a TPM2 loses power without a TPM2_Shutdown command being issued (a "disorderly reboot"), it may lose some state that has yet to be persisted to NVRam, and will increment the DA counter. After the DA counter gets sufficiently large, the TPM will lock the user out. NOTE: This only changes behavior on TPM2 devices. Since TPM1 uses sysfs, and sysfs relies on implicit locking on chip->ops, it is not safe to allow this code to run in TPM1, or to add sysfs support to TPM2, until that locking is made explicit. Signed-off-by: Josh Zimmerman <joshz@google.com> Fixes: 74d6b3ceaa17 ("tpm: fix suspend/resume paths for TPM 2.0") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-12tpm: fix a kernel memory leak in tpm-sysfs.cJarkko Sakkinen
commit 13b47cfcfc60495cde216eef4c01040d76174cbe upstream. While cleaning up sysfs callback that prints EK we discovered a kernel memory leak. This commit fixes the issue by zeroing the buffer used for TPM command/response. The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or xen-tpmfront. Fixes: 0883743825e3 ("TPM: sysfs functions consolidation") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05virtio_console: fix a crash in config_work_handlerG. Campana
[ Upstream commit 8379cadf71c3ee8173a1c6fc1ea7762a9638c047 ] Using control_work instead of config_work as the 3rd argument to container_of results in an invalid portdev pointer. Indeed, the work structure is initialized as below: INIT_WORK(&portdev->config_work, &config_work_handler); It leads to a crash when portdev->vdev is dereferenced later. This bug is triggered when the guest uses a virtio-console without multiport feature and receives a config_changed virtio interrupt. Signed-off-by: G. Campana <gcampana@quarkslab.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24vTPM: Fix missing NULL checkHon Ching \(Vicky) Lo
commit 31574d321c70f6d3b40fe98f9b2eafd9a903fef9 upstream. The current code passes the address of tpm_chip as the argument to dev_get_drvdata() without prior NULL check in tpm_ibmvtpm_get_desired_dma. This resulted an oops during kernel boot when vTPM is enabled in Power partition configured in active memory sharing mode. The vio_driver's get_desired_dma() is called before the probe(), which for vtpm is tpm_ibmvtpm_probe, and it's this latter function that initializes the driver and set data. Attempting to get data before the probe() caused the problem. This patch adds a NULL check to the tpm_ibmvtpm_get_desired_dma. fixes: 9e0d39d8a6a0 ("tpm: Remove useless priv field in struct tpm_vendor_specific") Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkine <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14drivers: char: mem: Fix wraparound check to allow mappings up to the endJulius Werner
commit 32829da54d9368103a2f03269a5120aa9ee4d5da upstream. A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow. Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()") Reported-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07pcmcia: remove left-over %Z formatNicolas Iooss
commit ff5a20169b98d84ad8d7f99f27c5ebbb008204d6 upstream. Commit 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") removed some usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a -Wformat-extra-args warning because it does not know about %Z. Replace %Z with %z. Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Harald Welte <laforge@gnumonks.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25drivers: char: mem: Check for address space wraparound with mmap()Julius Werner
commit b299cde245b0b76c977f4291162cf668e087b408 upstream. /dev/mem currently allows mmap() mappings that wrap around the end of the physical address space, which should probably be illegal. It circumvents the existing STRICT_DEVMEM permission check because the loop immediately terminates (as the start address is already higher than the end address). On the x86_64 architecture it will then cause a panic (from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()). This patch adds an explicit check to make sure offset + size will not wrap around in the physical address type. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_crb: check for bad response sizeJerry Snitselaar
commit 8569defde8057258835c51ce01a33de82e14b148 upstream. Make sure size of response buffer is at least 6 bytes, or we will underflow and pass large size_t to memcpy_fromio(). This was encountered while testing earlier version of locality patchset. Fixes: 30fc8d138e912 ("tpm: TPM 2.0 CRB Interface") Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm: add sleep only for retry in i2c_nuvoton_write_status()Nayna Jain
commit 0afb7118ae021e80ecf70f5a3336e0935505518a upstream. Currently, there is an unnecessary 1 msec delay added in i2c_nuvoton_write_status() for the successful case. This function is called multiple times during send() and recv(), which implies adding multiple extra delays for every TPM operation. This patch calls usleep_range() only if retry is to be done. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driverNayna Jain
commit a233a0289cf9a96ef9b42c730a7621ccbf9a6f98 upstream. Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_tis_spi: Add small delay after last transferPeter Huewe
commit 5cc0101d1f88500f8901d01b035af743215d4c3a upstream. Testing the implementation with a Raspberry Pi 2 showed that under some circumstances its SPI master erroneously releases the CS line before the transfer is complete, i.e. before the end of the last clock. In this case the TPM ignores the transfer and misses for example the GO command. The driver is unable to detect this communication problem and will wait for a command response that is never going to arrive, timing out eventually. As a workaround, the small delay ensures that the CS line is held long enough, even with a faulty SPI master. Other SPI masters are not affected, except for a negligible performance penalty. Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_tis_spi: Remove limitation of transfers to MAX_SPI_FRAMESIZE bytesPeter Huewe
commit 591e48c26ced7c455751eef27fb5963e902c2137 upstream. Limiting transfers to MAX_SPI_FRAMESIZE was not expected by the upper layers, as tpm_tis has no such limitation. Add a loop to hide that limitation. v2: Moved scope of spi_message to the top as requested by Jarkko Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_tis_spi: Check correct byte for wait state indicatorPeter Huewe
commit e110cc69dc2ad679d6d478df636b99b14e6fbbc9 upstream. Wait states are signaled in the last byte received from the TPM in response to the header, not the first byte. Check rx_buf[3] instead of rx_buf[0]. Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_tis_spi: Abort transfer when too many wait states are signaledPeter Huewe
commit 975094ddc369a32f27210248bdd9bbd153061b00 upstream. Abort the transfer with ETIMEDOUT when the TPM signals more than TPM_RETRY wait states. Continuing with the transfer in this state will only lead to arbitrary failures in other parts of the code. Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_tis_spi: Use single function to transfer dataPeter Huewe
commit f848f2143ae42dc0918400039257a893835254d1 upstream. The algorithm for sending data to the TPM is mostly identical to the algorithm for receiving data from the TPM, so a single function is sufficient to handle both cases. This is a prequisite for all the other fixes, so we don't have to fix everything twice (send/receive) v2: u16 instead of u8 for the length. Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25tpm_tis_core: Choose appropriate timeout for reading burstcountAlexander Steffen
commit 302a6ad7fc77146191126a1f3e2c5d724fd72416 upstream. TIS v1.3 for TPM 1.2 and PTP for TPM 2.0 disagree about which timeout value applies to reading a valid burstcount. It is TIMEOUT_D according to TIS, but TIMEOUT_A according to PTP, so choose the appropriate value depending on whether we deal with a TPM 1.2 or a TPM 2.0. This is important since according to the PTP TIMEOUT_D is much smaller than TIMEOUT_A. So the previous implementation could run into timeouts with a TPM 2.0, even though the TPM was behaving perfectly fine. During tpm2_probe TIMEOUT_D will be used even with a TPM 2.0, because TPM_CHIP_FLAG_TPM2 is not yet set. This is fine, since the timeout values will only be changed afterwards by tpm_get_timeouts. Until then TIS_TIMEOUT_D_MAX applies, which is large enough. Fixes: aec04cbdf723 ("tpm: TPM 2.0 FIFO Interface") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25char: lp: fix possible integer overflow in lp_setup()Willy Tarreau
commit 3e21f4af170bebf47c187c1ff8bf155583c9f3b1 upstream. The lp_setup() code doesn't apply any bounds checking when passing "lp=none", and only in this case, resulting in an overflow of the parport_nr[] array. All versions in Git history are affected. Reported-By: Roee Hay <roee.hay@hcl.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20ipmi: Fix kernel panic at ipmi_ssif_thread()Joeseph Chang
commit 6de65fcfdb51835789b245203d1bfc8d14cb1e06 upstream. msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by: Joeseph Chang <joechang@codeaurora.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14tmp: use pdev for parent device in tpm_chip_allocWinkler, Tomas
commit 2998b02b2fb58f36ccbc318b00513174e9947d8e upstream. The tpm stack uses pdev name convention for the parent device. Fix that also in tpm_chip_alloc(). Fixes: 3897cd9c8d1d ("tpm: Split out the devm stuff from tpmm_chip_alloc")' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14tpm: fix RC value check in tpm2_seal_trustedJarkko Sakkinen
commit 7d761119a914ec0ac05ec2a5378d1f86e680967d upstream. The error code handling is broken as any error code that has the same bits set as TPM_RC_HASH passes. Implemented tpm2_rc_value() helper to parse the error value from FMT0 and FMT1 error codes so that these types of mistakes are prevented in the future. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-08tpm_tis: use default timeout value if chip reports it as zeroMaciej S. Szmigiero
commit 1d70fe9d9c3a4c627f9757cbba5d628687b121c1 upstream. Since commit 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Atmel 3203 TPM on ThinkPad X61S (TPM firmware version 13.9) no longer works. The initialization proceeds fine until we get and start using chip-reported timeouts - and the chip reports C and D timeouts of zero. It turns out that until commit 8e54caf407b98e ("tpm: Provide a generic means to override the chip returned timeouts") we had actually let default timeout values remain in this case, so let's bring back this behavior to make chips like Atmel 3203 work again. Use a common code that was introduced by that commit so a warning is printed in this case and /sys/class/tpm/tpm*/timeouts correctly says the timeouts aren't chip-original. This is a backport for 4.9 kernel version of the original commit, with renaming of "TPM_TIS_ITPM_POSSIBLE" flag removed since it was only a cosmetic change and not a part of the real bug fix. Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21virtio-console: avoid DMA from stackOmar Sandoval
commit c4baad50297d84bde1a7ad45e50c73adae4a2192 upstream. put_chars() stuffs the buffer it gets into an sg, but that buffer may be on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it manifested as printks getting turned into NUL bytes). Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21mm: Tighten x86 /dev/mem with zeroing readsKees Cook
commit a4866aa812518ed1a37d8ea0c881dc946409de94 upstream. Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is disallowed. However, on x86, the first 1MB was always allowed for BIOS and similar things, regardless of it actually being System RAM. It was possible for heap to end up getting allocated in low 1MB RAM, and then read by things like x86info or dd, which would trip hardened usercopy: usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes) This changes the x86 exception for the low 1MB by reading back zeros for System RAM areas instead of blindly allowing them. More work is needed to extend this to mmap, but currently mmap doesn't go through usercopy, so hardened usercopy won't Oops the kernel. Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21char: lack of bool string made CONFIG_DEVPORT always onMax Bires
commit f2cfa58b136e4b06a9b9db7af5ef62fbb5992f62 upstream. Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by: Max Bires <jbires@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12random: use chacha20 for get_random_int/longJason A. Donenfeld
commit f5b98461cb8167ba362ad9f74c41d126b7becea7 upstream. Now that our crng uses chacha20, we can rely on its speedy characteristics for replacing MD5, while simultaneously achieving a higher security guarantee. Before the idea was to use these functions if you wanted random integers that aren't stupidly insecure but aren't necessarily secure either, a vague gray zone, that hopefully was "good enough" for its users. With chacha20, we can strengthen this claim, since either we're using an rdrand-like instruction, or we're using the same crng as /dev/urandom. And it's faster than what was before. We could have chosen to replace this with a SipHash-derived function, which might be slightly faster, but at the cost of having yet another RNG construction in the kernel. By moving to chacha20, we have a single RNG to analyze and verify, and we also already get good performance improvements on all platforms. Implementation-wise, rather than use a generic buffer for both get_random_int/long and memcpy based on the size needs, we use a specific buffer for 32-bit reads and for 64-bit reads. This way, we're guaranteed to always have aligned accesses on all platforms. While slightly more verbose in C, the assembly this generates is a lot simpler than otherwise. Finally, on 32-bit platforms where longs and ints are the same size, we simply alias get_random_int to get_random_long. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by: Theodore Ts'o <tytso@mit.edu> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12ppdev: fix registering same device nameSudip Mukherjee
commit 9a69645dde1188723d80745c1bc6ee9af2cbe2a7 upstream. Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a big warning like: "sysfs: cannot create duplicate filename '/devices/parport0/ppdev0.0'". And with that many parallel port printers stopped working. We have been using the minor number as the id field while registering a parralel port device with a parralel port. But when there are multiple parrallel port device for one single parallel port, they all tried to register with the same name like 'pardev0.0' and everything started failing. Use an incremented index as the id instead of the minor number. Fixes: 8b7d3a9d903e ("ppdev: use new parport device model") Cc: stable <stable@vger.kernel.org> # v4.9+ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322 Tested-by: James Feeney <james@nurealm.net> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12ppdev: check before attaching portSudip Mukherjee
commit dd5c472a60e43549d789a17a8444513eec64bd7e upstream. After parport starts using the device model, all pardevice drivers should decide in their match_port callback function if they want to attach with that particulatr port. ppdev has been converted to use the new parport device-model code but pp_attach() tried to attach with all the ports. Create a new array of pointer and use that to remember the ports we have attached. And use that information to skip attaching ports which we have already attached. Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30hwrng: geode - Revert managed API changesPrarit Bhargava
commit 8c75704ebcac2ffa31ee7bcc359baf701b52bf00 upstream. After commit e9afc746299d ("hwrng: geode - Use linux/io.h instead of asm/io.h") the geode-rng driver uses devres with pci_dev->dev to keep track of resources, but does not actually register a PCI driver. This results in the following issues: 1. The driver leaks memory because the driver does not attach to a device. The driver only uses the PCI device as a reference. devm_*() functions will release resources on driver detach, which the geode-rng driver will never do. As a result, 2. The driver cannot be reloaded because there is always a use of the ioport and region after the first load of the driver. Revert the changes made by e9afc746299d ("hwrng: geode - Use linux/io.h instead of asm/io.h"). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Fixes: 6e9b5e76882c ("hwrng: geode - Migrate to managed API") Cc: Matt Mackall <mpm@selenic.com> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-crypto@vger.kernel.org Cc: linux-geode@lists.infradead.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30hwrng: amd - Revert managed API changesPrarit Bhargava
commit 69db7009318758769d625b023402161c750f7876 upstream. After commit 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"), the amd-rng driver uses devres with pci_dev->dev to keep track of resources, but does not actually register a PCI driver. This results in the following issues: 1. The message WARNING: CPU: 2 PID: 621 at drivers/base/dd.c:349 driver_probe_device+0x38c is output when the i2c_amd756 driver loads and attempts to register a PCI driver. The PCI & device subsystems assume that no resources have been registered for the device, and the WARN_ON() triggers since amd-rng has already do so. 2. The driver leaks memory because the driver does not attach to a device. The driver only uses the PCI device as a reference. devm_*() functions will release resources on driver detach, which the amd-rng driver will never do. As a result, 3. The driver cannot be reloaded because there is always a use of the ioport and region after the first load of the driver. Revert the changes made by 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Fixes: 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"). Cc: Matt Mackall <mpm@selenic.com> Cc: Corentin LABBE <clabbe.montjoie@gmail.com> Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-crypto@vger.kernel.org Cc: linux-geode@lists.infradead.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12tpm_tis: fix the error handling of init_tis()Wei Yongjun
commit 5939eaf4f9d432586dd2cdeea778506471e8088e upstream. Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drivers: char: mem: Fix thinkos in kmem address checksRobin Murphy
commit 488debb9971bc7d0edd6d8080ba78ca02a04f6c4 upstream. When borrowing the pfn_valid() check from mmap_kmem(), somebody managed to get physical and virtual addresses spectacularly muddled up, such that we've ended up with checks for one being the other. Whilst this does indeed prevent out-of-bounds accesses crashing, on most systems it also prevents the more desirable use-case of working at all ever. Check the *virtual* offset correctly for what it is. Furthermore, do so in the right place - a read or write may span multiple pages, so a single up-front check is insufficient. High memory accesses already have a similar validity check just before the copy_to_user() call, so just make the low memory path fully consistent with that. Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 148a1bc84398 ("drivers: char: mem: Check {read,write}_kmem() addresses") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12tpm_tis: Check return values from get_burstcount.Josh Zimmerman
commit 26a137e31ffe6fbfdb008554a8d9b3d55bd5c86e upstream. If the TPM we're connecting to uses a static burst count, it will report a burst count of zero throughout the response read. However, get_burstcount assumes that a response of zero indicates that the TPM is not ready to receive more data. In this case, it returns a negative error code, which is passed on to tpm_tis_{write,read}_bytes as a u16, causing them to read/write far too many bytes. This patch checks for negative return codes and bails out from recv_data and tpm_tis_send_data. Fixes: 1107d065fdf1 (tpm_tis: Introduce intermediate layer for TPM access) Signed-off-by: Josh Zimmerman <joshz@google.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06tpm xen: Remove bogus tpm_chip_unregisterJason Gunthorpe
commit 1f0f30e404b3d8f4597a2d9b77fba55452f8fd0e upstream. tpm_chip_unregister can only be called after tpm_chip_register. devm manages the allocation so no unwind is needed here. Fixes: afb5abc262e96 ("tpm: two-phase chip management functions") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-18ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'Cédric Le Goater
The Aspeed SoCs have two BT interfaces : one is IPMI compliant and the other is H8S/2168 compliant. The current ipmi/bt-bmc driver implements the IPMI version and we should reflect its nature in the compatible node name using 'aspeed,ast2400-ibt-bmc' instead of 'aspeed,ast2400-bt-bmc'. The latter should be used for a H8S interface driver if it is implemented one day. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-13Merge tag 'char-misc-4.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are three small driver fixes for some reported issues for 4.9-rc5. One for the hyper-v subsystem, fixing up a naming issue that showed up in 4.9-rc1, one mei driver fix, and one fix for parallel ports, resolving a reported regression. All have been in linux-next with no reported issues" * tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ppdev: fix double-free of pp->pdev->name vmbus: make sysfs names consistent with PCI mei: bus: fix received data size check in NFC fixup
2016-11-10ppdev: fix double-free of pp->pdev->nameJann Horn
free_pardevice() is called by parport_unregister_device() and already frees pp->pdev->name, don't try to do it again. This bug causes kernel crashes. I found and verified this with KASAN and some added pr_emerg()s: [ 60.316568] pp_release: pp->pdev->name == ffff88039cb264c0 [ 60.316692] free_pardevice: freeing par_dev->name at ffff88039cb264c0 [ 60.316706] pp_release: kfree(ffff88039cb264c0) [ 60.316714] ========================================================== [ 60.316722] BUG: Double free or freeing an invalid pointer [ 60.316731] Unexpected shadow byte: 0xFB [ 60.316801] Object at ffff88039cb264c0, in cache kmalloc-32 size: 32 [ 60.316813] Allocated: [ 60.316824] PID = 1695 [ 60.316869] Freed: [ 60.316880] PID = 1695 [ 60.316935] ========================================================== Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Tests, fixes and cleanups. Just minor tweaks, there's nothing major in this cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: mark vring_dma_dev inline virtio/vhost: add Jason to list of maintainers virtio_blk: Delete an unnecessary initialisation in init_vq() virtio_blk: Use kmalloc_array() in init_vq() virtio: remove config.c virtio: console: Unlock vqs while freeing buffers ringtest: poll for new buffers once before updating event index ringtest: commonize implementation of poll_avail/poll_used ringtest: use link-time optimization virtio: update balloon size in balloon "probe" virtio_ring: Make interrupt suppression spec compliant virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices
2016-10-31tpm: remove invalid min length check from tpm_do_selftest()Jarkko Sakkinen
Removal of this check was not properly amended to the original commit. Cc: stable@vger.kernel.org Fixes: 0c541332231e ("tpm: use tpm_pcr_read_dev() in tpm_do_selftest()") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-10-30virtio: console: Unlock vqs while freeing buffersMatt Redfearn
Commit c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") Cc: stable@vger.kernel.org Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-25Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a regression caused by the stack vmalloc change" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: core - Don't use a stack buffer in add_early_randomness()
2016-10-23Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A small bug fix and a new driver for acting as an IPMI device. I was on vacation during the merge window (a long vacation) but this is a bug fix that should go in and a new driver that shouldn't hurt anything. This has been in linux-next for a month or so" * tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: fix crash on reading version from proc after unregisted bmc ipmi/bt-bmc: remove redundant return value check of platform_get_resource() ipmi/bt-bmc: add a dependency on ARCH_ASPEED ipmi: Fix ioremap error handling in bt-bmc ipmi: add an Aspeed BT IPMI BMC driver
2016-10-19hwrng: core - Don't use a stack buffer in add_early_randomness()Andrew Lutomirski
hw_random carefully avoids using a stack buffer except in add_early_randomness(). This causes a crash in virtio_rng if CONFIG_VMAP_STACK=y. Reported-by: Matt Mullins <mmullins@mmlx.us> Tested-by: Matt Mullins <mmullins@mmlx.us> Fixes: d3cc7996473a ("hwrng: fetch randomness only after device init") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-15Merge tag 'gcc-plugins-v4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
2016-10-12Merge branch 'work.uaccess2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal
2016-10-12Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11random: remove unused randomize_range()Jason Cooper
All call sites for randomize_range have been updated to use the much simpler and more robust randomize_addr(). Remove the now unnecessary code. Link: http://lkml.kernel.org/r/20160803233913.32511-8-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-06-17 20:23:09 (GMT)