summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2013-10-15Merge tag 'stable/for-linus-3.12-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Stefano Stabellini: "A small fix for Xen on x86_32 and a build fix for xen-tpmfront on arm64" * tag 'stable/for-linus-3.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix possible user space selector corruption tpm: xen-tpmfront: fix missing declaration of xen_domain
2013-10-10Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random changes from Ted Ts'o: "These patches are designed to enable improvements to /dev/random for non-x86 platforms, in particular MIPS and ARM" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: allow architectures to optionally define random_get_entropy() random: run random_int_secret_init() run after all late_initcalls
2013-10-10random: allow architectures to optionally define random_get_entropy()Theodore Ts'o
Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2013-10-10tpm: xen-tpmfront: fix missing declaration of xen_domainRob Herring
xen-tpmfront fails to build on arm64 with the following error: drivers/char/tpm/xen-tpmfront.c: In function ‘xen_tpmfront_init’: drivers/char/tpm/xen-tpmfront.c:422:2: error: implicit declaration of function ‘xen_domain’ [-Werror=implicit-function-declaration] Add include of xen/xen.h to fix this. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> Acked-by: Ashley Lai <adlai@linux.vnet.ibm.com> Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: tpmdd-devel@lists.sourceforge.net
2013-09-25Merge tag 'stable/for-linus-3.12-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Konrad Rzeszutek Wilk: "Bug-fixes and one update to the kernel-paramters.txt documentation. - Fix PV spinlocks triggering jump_label code bug - Remove extraneous code in the tpm front driver - Fix ballooning out of pages when non-preemptible - Fix deadlock when using a 32-bit initial domain with large amount of memory - Add xen_nopvpsin parameter to the documentation" * tag 'stable/for-linus-3.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/spinlock: Document the xen_nopvspin parameter. xen/p2m: check MFN is in range before using the m2p table xen/balloon: don't alloc page while non-preemptible xen: Do not enable spinlocks before jump_label_init() has executed tpm: xen-tpmfront: Remove the locality sysfs attribute tpm: xen-tpmfront: Fix default durations
2013-09-24tpm: xen-tpmfront: Remove the locality sysfs attributeJason Gunthorpe
Upon deeper review it was agreed to remove the driver-unique 'locality' sysfs attribute before it is present in a released kernel. The attribute was introduced in e2683957fb268c6b29316fd9e7191e13239a30a5 during the 3.12 merge window, so this patch needs to go in before 3.12 is released. The hope is to have a well defined locality API that all the other locality aware drivers can use, perhaps in 3.13. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
2013-09-24tpm: xen-tpmfront: Fix default durationsJason Gunthorpe
All the default durations were being set to 10 minutes which is way too long for the timeouts. Normal values for the longest duration are around 5 mins, and short duration ar around .5s. Further, these are just the default, tpm_get_timeouts will set them to values from the TPM (or throw an error). Just remove them. Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-23random: run random_int_secret_init() run after all late_initcallsTheodore Ts'o
The some platforms (e.g., ARM) initializes their clocks as late_initcalls for some unknown reason. So make sure random_int_secret_init() is run after all of the late_initcalls are run. Cc: stable@vger.kernel.org Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-11tpm: convert tpm_tis driver to use dev_pm_ops from legacy pm_opsShuah Khan
Convert drivers/char/tpm/tpm_tis.c to use dev_pm_ops instead of legacy pm_ops. This patch depends on pnp driver bus ops change to invoke pnp_driver dev_pm_ops. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Cc: Matthew Garrett <matthew.garrett@nebula.com> Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com> Cc: Ashley Lai <ashley@ashleylai.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-09Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio update from Rusty Russell: "More console fixes; these are the theoretical ones which didn't get CC:stable. But for that reason, I did a merge with master partway through to avoid an unnecessary conflict. Also: a fun lguest bug turns out if you don't clear the TF flag when trapping Bad Things happen to the guest kernel as the stack overflows..." * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM lguest: fix GPF in guest when using gdb. lguest: fix guest kernel stack overflow when TF bit set. lguest: fix BUG_ON() in invalid guest page table. virtio: console: prevent use-after-free of port name in port unplug virtio: console: cleanup an error message virtio: console: fix locking around send_sigio_to_port() virtio: console: add locking in port unplug path virtio: console: add locks around buffer removal in port unplug path tools/lguest: offer VIRTIO_F_ANY_LAYOUT for net device. virtio tools: add .gitignore lguest: Point to the right directory for the lguest launcher
2013-09-09Merge tag 'v3.11-rc7' into stable/for-linus-3.12Konrad Rzeszutek Wilk
Linux 3.11-rc7 As we need the git commit 28817e9de4f039a1a8c1fe1df2fa2df524626b9e Author: Chuck Anderson <chuck.anderson@oracle.com> Date: Tue Aug 6 15:12:19 2013 -0700 xen/smp: initialize IPI vectors before marking CPU online * tag 'v3.11-rc7': (443 commits) Linux 3.11-rc7 ARC: [lib] strchr breakage in Big-endian configuration VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c staging: comedi: bug-fix NULL pointer dereference on failed attach lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "ACPI / video: Always call acpi_video_init_brightness() on init" Revert "genetlink: fix family dump race" ... Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: "Here is the crypto update for 3.12: - Added MODULE_SOFTDEP to allow pre-loading of modules. - Reinstated crct10dif driver using the module softdep feature. - Allow via rng driver to be auto-loaded. - Split large input data when necessary in nx. - Handle zero length messages correctly for GCM/XCBC in nx. - Handle SHA-2 chunks bigger than block size properly in nx. - Handle unaligned lengths in omap-aes. - Added SHA384/SHA512 to omap-sham. - Added OMAP5/AM43XX SHAM support. - Added OMAP4 TRNG support. - Misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits) Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" hwrng: via - Add MODULE_DEVICE_TABLE crypto: fcrypt - Fix bitoperation for compilation with clang crypto: nx - fix SHA-2 for chunks bigger than block size crypto: nx - fix GCM for zero length messages crypto: nx - fix XCBC for zero length messages crypto: nx - fix limits to sg lists for AES-CCM crypto: nx - fix limits to sg lists for AES-XCBC crypto: nx - fix limits to sg lists for AES-GCM crypto: nx - fix limits to sg lists for AES-CTR crypto: nx - fix limits to sg lists for AES-CBC crypto: nx - fix limits to sg lists for AES-ECB crypto: nx - add offset to nx_build_sg_lists() padata - Register hotcpu notifier after initialization padata - share code between CPU_ONLINE and CPU_DOWN_FAILED, same to CPU_DOWN_PREPARE and CPU_UP_CANCELED hwrng: omap - reorder OMAP TRNG driver code crypto: omap-sham - correct dma burst size crypto: omap-sham - Enable Polling mode if DMA fails crypto: tegra-aes - bitwise vs logical and crypto: sahara - checking the wrong variable ...
2013-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merge upstream tree in order to reinstate crct10dif.
2013-09-05Merge branch 'ipmi'Linus Torvalds
Merge IPMI fixes from: "A few things for 3.12 from various people" * emailed patches from Corey Minyard <minyard@acm.org>: BMC support for PARISC machines Add MODULE_ALIAS for autoloading ipmi driver on ACPI systems ipmi: Initialize locals to avoid warning ipmi: info leak in compat_ipmi_ioctl()
2013-09-05BMC support for PARISC machinesThomas Bogendoerfer
The last line of PARISC machines (C8000, RP34x0, etc.) have a BMC for controlling temperature, fan speed and other stuff. The BMC is connected via a special bus and listed in the firmware device tree. This change adds support for these BMCs to the IPMI driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05Add MODULE_ALIAS for autoloading ipmi driver on ACPI systemsJordan_Hargrave@Dell.com
I'd submitted this about a year ago but it never made it upstream. The latest versions of the kernel drivers for ipmi can use ACPI to determine the type of BMC device used in the system. The following patch adds a module alias so that udev will autoload the ipmi_si driver. Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05ipmi: Initialize locals to avoid warningCorey Minyard
A couple of variables were getting warnings about being uninitialized. It was a false warning, but initialize them, anyway. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05ipmi: info leak in compat_ipmi_ioctl()Dan Carpenter
On x86_64 there is a 4 byte hole between ->recv_type and ->addr. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05Merge tag 'stable/for-linus-3.12-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "A couple of features and a ton of bug-fixes. There is also some maintership changes. Jeremy is enjoying the full-time work at the startup and as much as he would love to help - he can't find the time. I have a bunch of other things that I promised to work on - paravirt diet, get SWIOTLB working everywhere, etc, but haven't been able to find the time. As such both David Vrabel and Boris Ostrovsky have graciously volunteered to help with the maintership role. They will keep the lid on regressions, bug-fixes, etc. I will be in the background to help - but eventually there will be less of me doing the Xen GIT pulls and more of them. Stefano is still doing the ARM/ARM64 and will continue on doing so. Features: - Xen Trusted Platform Module (TPM) frontend driver - with the backend in MiniOS. - Scalability improvements in event channel. - Two extra Xen co-maintainers (David, Boris) and one going away (Jeremy) Bug-fixes: - Make the 1:1 mapping work during early bootup on selective regions. - Add scratch page to balloon driver to deal with unexpected code still holding on stale pages. - Allow NMIs on PV guests (64-bit only) - Remove unnecessary TLB flush in M2P code. - Fixes duplicate callbacks in Xen granttable code. - Fixes in PRIVCMD_MMAPBATCH ioctls to allow retries - Fix for events being lost due to rescheduling on different VCPUs. - More documentation" * tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (23 commits) hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc drivers/xen-tpmfront: Fix compile issue with missing option. xen/balloon: don't set P2M entry for auto translated guest xen/evtchn: double free on error Xen: Fix retry calls into PRIVCMD_MMAPBATCH*. xen/pvhvm: Initialize xen panic handler for PVHVM guests xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping xen: fix ARM build after 6efa20e4 MAINTAINERS: Remove Jeremy from the Xen subsystem. xen/events: document behaviour when scanning the start word for events x86/xen: during early setup, only 1:1 map the ISA region x86/xen: disable premption when enabling local irqs swiotlb-xen: replace dma_length with sg_dma_len() macro swiotlb: replace dma_length with sg_dma_len() macro xen/balloon: set a mapping for ballooned out pages xen/evtchn: improve scalability by using per-user locks xen/p2m: avoid unneccesary TLB flush in m2p_remove_override() MAINTAINERS: Add in two extra co-maintainers of the Xen tree. MAINTAINERS: Update the Xen subsystem's with proper mailing list. xen: replace strict_strtoul() with kstrtoul() ...
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-03Merge tag 'pm+acpi-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-02hwrng: via - Add MODULE_DEVICE_TABLEBen Hutchings
via-rng currently isn't auto-loaded if built as a module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-30drivers/xen-tpmfront: Fix compile issue with missing option.Konrad Rzeszutek Wilk
Randy reports: x86_64: drivers/built-in.o: In function `xen_tpmfront_init': xen-tpmfront.c:(.init.text+0x257c): undefined reference to `xenbus_register_frontend' This is nicely fixed by selecting the XenBus frontend module. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-21hwrng: omap - reorder OMAP TRNG driver codeOlof Johansson
The newly added omap4 support in the driver was added without consideration for building older configs. When building omap1_defconfig, it resulted in: drivers/char/hw_random/omap-rng.c:190:12: warning: 'omap4_rng_init' defined but not used [-Wunused-function] drivers/char/hw_random/omap-rng.c:215:13: warning: 'omap4_rng_cleanup' defined but not used [-Wunused-function] drivers/char/hw_random/omap-rng.c:251:20: warning: 'omap4_rng_irq' defined but not used [-Wunused-function] Move the code around so it is grouped with its operations struct, which for the omap4 case means also under the #ifdef CONFIG_OF, where it needs to be. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-19Merge 3.11-rc6 into char-misc-nextGreg Kroah-Hartman
We want these fixes in this tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14Merge back earlier 'acpi-assorted' materialRafael J. Wysocki
2013-08-14hwrng: tx4939 - simplify use of devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09drivers/tpm: add xen tpmfront interfaceDaniel De Graaf
This is a complete rewrite of the Xen TPM frontend driver, taking advantage of a simplified frontend/backend interface and adding support for cancellation and timeouts. The backend for this driver is provided by a vTPM stub domain using the interface in Xen 4.3. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Acked-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-08-09hwrng: pixocel - Staticize 'rng_dev'Jingoo Han
'rng_dev' is used only in this file. Fix the following sparse warning: drivers/char/hw_random/picoxcell-rng.c:36:15: warning: symbol 'rng_dev' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09hwrng: omap - Add OMAP4 TRNG supportLokesh Vutla
Add support for OMAP4 version of TRNG module that is present on OMAP4, AM33xx and OMAP5 SoCs. The modules have several differences including register offsets, output size, triggering rng and how configuring FROs. To handle these differences, a platform_data structure is defined and contains routine pointers, register offsets. OMAP2 specific routines are prefixed with 'omap2_' and OMAP4 specific routines are prefixed with 'omap4_'. Note: Few Hard coded values are from the TI AM33xx SDK. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09hwrng: omap - Add device tree supportLokesh Vutla
Add Device Tree suport to the omap-rng driver. Currently, only support for OMAP2 and OMAP3 is being added but support for OMAP4 and OMAP5 will be added in a subsequent patch. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09hwrng: omap - Remove duplicated function callLokesh Vutla
platform_set_drvdata() is called twice in driver probe. Removing the duplicated call. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09hwrng: omap - Convert to devm_kzalloc()Lokesh Vutla
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09hwrng: omap - Use module_platform_driver macroLokesh Vutla
module_platform_driver() makes the code simpler. Using the macro in the driver. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-09virtio: console: prevent use-after-free of port name in port unplugAmit Shah
Remove the debugfs path before freeing port->name, to prevent a possible use-after-free. Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-08-09Merge branch 'master' into virtio-nextRusty Russell
The next commit gets conflicts because it relies on patches which were cc:stable and thus had to be merged into Linus' tree before the coming merge window. So pull in master now. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-08-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio fixes from Rusty Russell: "More virtio console fixes than I'm happy with, but all real issues, and all CC:stable.." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio-scsi: Fix virtqueue affinity setup virtio: console: return -ENODEV on all read operations after unplug virtio: console: fix raising SIGIO after port unplug virtio: console: clean up port data immediately at time of unplug virtio: console: fix race in port_fops_open() and port unplug virtio: console: fix race with port unplug and open/close virtio/console: Add pipe_lock/unlock for splice_write virtio/console: Quit from splice_write if pipe->nrbufs is 0
2013-08-01hwrng: mxc-rnga - Check the return value from clk_prepare_enable()Fabio Estevam
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-07-31parisc: agp/parisc-agp: allow binding of user memory to the AGP GARTAlex Ivanov
Allow binding of user memory to the AGP GART on systems with HP Quicksilver AGP bus. This resolves 'bind memory failed' error seen in dmesg: [29.365973] [TTM] AGP Bind memory failed. … [29.367030] [drm] Forcing AGP to PCI mode The system doesn't more fail to bind the memory, and hence not falling back to the PCI mode (if other failures aren't detected). This is just a simple write down from the following patches: agp/amd-k7: Allow binding user memory to the AGP GART agp/hp-agp: Allow binding user memory to the AGP GART Signed-off-by: Alex Ivanov <gnidorah@p0n4ik.tk> Cc: <stable@vger.kernel.org> # 3.10 Signed-off-by: Helge Deller <deller@gmx.de>
2013-07-30virtio: console: cleanup an error messageDan Carpenter
The PTR_ERR(NULL) here is not useful. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: fix locking around send_sigio_to_port()Amit Shah
send_sigio_to_port() checks the value of guest_connected, which we always modify under the inbuf_lock; make sure invocations of send_sigio_to_port() have take the inbuf_lock around the call. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: add locking in port unplug pathAmit Shah
Port unplug can race with close() in port_fops_release(). port_fops_release() already takes the necessary locks, ensure unplug_port() does that too. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: add locks around buffer removal in port unplug pathAmit Shah
The removal functions act on the vqs, and the vq operations need to be locked. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: return -ENODEV on all read operations after unplugAmit Shah
If a port gets unplugged while a user is blocked on read(), -ENODEV is returned. However, subsequent read()s returned 0, indicating there's no host-side connection (but not indicating the device went away). This also happened when a port was unplugged and the user didn't have any blocking operation pending. If the user didn't monitor the SIGIO signal, they won't have a chance to find out if the port went away. Fix by returning -ENODEV on all read()s after the port gets unplugged. write() already behaves this way. CC: <stable@vger.kernel.org> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: fix raising SIGIO after port unplugAmit Shah
SIGIO should be sent when a port gets unplugged. It should only be sent to prcesses that have the port opened, and have asked for SIGIO to be delivered. We were clearing out guest_connected before calling send_sigio_to_port(), resulting in a sigio not getting sent to processes. Fix by setting guest_connected to false after invoking the sigio function. CC: <stable@vger.kernel.org> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: clean up port data immediately at time of unplugAmit Shah
We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60 [<ffffffff812734b4>] ? kobject_add+0x44/0x70 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0 [<ffffffff8134b389>] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb #9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. CC: <stable@vger.kernel.org> Reported-by: chayang <chayang@redhat.com> Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com> Reported-by: FuXiangChun <xfu@redhat.com> Reported-by: Qunfang Zhang <qzhang@redhat.com> Reported-by: Sibiao Luo <sluo@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: fix race in port_fops_open() and port unplugAmit Shah
Between open() being called and processed, the port can be unplugged. Check if this happened, and bail out. A simple test script to reproduce this is: while true; do for i in $(seq 1 100); do echo $i > /dev/vport0p3; done; done; This opens and closes the port a lot of times; unplugging the port while this is happening triggers the bug. CC: <stable@vger.kernel.org> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-29virtio: console: fix race with port unplug and open/closeAmit Shah
There's a window between find_port_by_devt() returning a port and us taking a kref on the port, where the port could get unplugged. Fix it by taking the reference in find_port_by_devt() itself. Problem reported and analyzed by Mateusz Guzik. CC: <stable@vger.kernel.org> Reported-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>