summaryrefslogtreecommitdiff
path: root/drivers/clk/tegra
AgeCommit message (Collapse)Author
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-09Merge tag 'tegra-for-4.7-phy' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "phy: tegra: Changes for v4.7-rc1" from Thierry Reding: This set of patches adds support for the Tegra XUSB pad controller. The controller provides a set of pads (lanes) that are used for I/O by other IP blocks within Tegra SoCs (PCIe, SATA and XUSB). * tag 'tegra-for-4.7-phy' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
2016-04-28clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLsAndrew Bresticker
On Tegra210, hardware control of the SATA and XUSB pad PLLs must be done during the UPHY enable sequence rather than the PLLE enable sequence. Export functions to do this so that hardware control can be enabled from the XUSB padctl driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-28treewide: Fix typos in printkMasanari Iida
This patch fix spelling typos in printk from various part of the codes. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-29clk: tegra: Make reset_control_ops constPhilipp Zabel
The rst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: tegra: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now. Remove usage of the flag. Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02clk: tegra: super: Fix sparse warnings for functions not declared as staticJon Hunter
Sparse reports the following warnings for structures and functions that should be declared static: drivers/clk/tegra/clk-tegra-super-gen4.c:70:35: warning: symbol 'tegra_super_gen_info_gen4' was not declared. Should it be static? drivers/clk/tegra/clk-tegra-super-gen4.c:96:35: warning: symbol 'tegra_super_gen_info_gen5' was not declared. Should it be static? drivers/clk/tegra/clk-tegra-super-gen4.c:174:13: warning: symbol 'tegra_super_clk_init' was not declared. Should it be static? Fix this by making the above static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix sparse warnings for functions not declared as staticJon Hunter
Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix sparse warning for pll_mJon Hunter
Sparse generates the following warning for the pll_m params structure: drivers/clk/tegra/clk-tegra210.c:1569:10: warning: Initializer entry defined twice drivers/clk/tegra/clk-tegra210.c:1570:10: also defined here Fix this by correcting the index for the MISC1 register. Fixes: b31eba5ff3f7 ("clk: tegra: Add support for Tegra210 clocks") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Use definition for pll_u override bitJon Hunter
The definition, PLLU_BASE_OVERRIDE, for the pll_u OVERRIDE bit is defined but not used and when the OVERRIDE bit is cleared in tegra210_pll_init() the code directly uses the bit number. Therefore, use the definition, PLLU_BASE_OVERRIDE when clearing the OVERRIDE bit. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix warning caused by pll_u failing to lockJon Hunter
If the pll_u is not configured by the bootloader, then on kernel boot the following warning is seen: clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock tegra_init_from_table: Failed to enable pll_u_out1 ------------[ cut here ]------------ WARNING: at drivers/clk/tegra/clk.c:269 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-next-20151214+ #1 Hardware name: NVIDIA Tegra210 P2371 reference board (E.1) (DT) task: ffffffc0bc0a0000 ti: ffffffc0bc0a8000 task.ti: ffffffc0bc0a8000 PC is at tegra_init_from_table+0x140/0x164 LR is at tegra_init_from_table+0x140/0x164 pc : [<ffffffc0008fee78>] lr : [<ffffffc0008fee78>] pstate: 80000045 sp : ffffffc0bc0abd50 x29: ffffffc0bc0abd50 x28: ffffffc00090b8a8 x27: ffffffc000a06000 x26: ffffffc0bc019780 x25: ffffffc00086a708 x24: ffffffc00086a790 x23: ffffffc0006d7188 x22: ffffffc0bc010000 x21: 000000000000016e x20: ffffffc0bc00d100 x19: ffffffc000944178 x18: 0000000000000007 x17: 000000000000000e x16: 0000000000000001 x15: 0000000000000007 x14: 000000000000000e x13: 0000000000000013 x12: 000000000000001a x11: 000000000000004d x10: 0000000000000750 x9 : ffffffc0bc0a8000 x8 : ffffffc0bc0a07b0 x7 : 0000000000000001 x6 : 0000000002d5f0f8 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000002 x2 : ffffffc000996724 x1 : 0000000000000000 x0 : 0000000000000032 ---[ end trace cbd20ae519e92ced ]--- Call trace: [<ffffffc0008fee78>] tegra_init_from_table+0x140/0x164 [<ffffffc000900ac8>] tegra210_clock_apply_init_table+0x20/0x28 [<ffffffc0008fec40>] tegra_clocks_apply_init_table+0x18/0x24 [<ffffffc00008291c>] do_one_initcall+0x90/0x194 [<ffffffc0008cfab0>] kernel_init_freeable+0x148/0x1e8 [<ffffffc000636bb0>] kernel_init+0x10/0xdc [<ffffffc000085cd0>] ret_from_fork+0x10/0x40 clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock tegra_init_from_table: Failed to enable pll_u_out2 ------------[ cut here ]------------ pll_u can be either controlled by software or hardware and this is selected via the OVERRIDE bit in the pll_u base register. In the function tegra210_pll_init(), the OVERRIDE bit for pll_u is cleared, which selects hardware control of the pll. However, at the same time the pll_u clocks are populated in the init_table for tegra210 and so software will try to configure the pll_u if it is not already configured and hence, the above warning is seen when the pll fails to lock. Remove the pll_u clocks from the init_table so that software does not try to configure this pll on boot. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix clock sources for Tegra210 EMCJon Hunter
The EMC clock sources for Tegra210 currently incorrectly include pll_c2 and pll_c3. However, both of these should have been pll_mb as shown in the TRM. If Tegra210 happens to be configured such that the pll_mb is the default clock for the EMC, as configured by the bootloader, then this will cause a system hang on boot. This is because the kernel will disable the pll_mb when disabling unused clock as it appears to be unused when it is not. Also add the additional pll_p clock source for the EMC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Add the APB2APE audio clock on Tegra210Jon Hunter
The APB2APE clock for the audio subsystem is required for powering up the audio power domain and accessing the various modules in this subsystem on Tegra210 devices. Add this clock for Tegra210. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Add missing of_node_put()Amitoj Kaur Chawla
for_each_child_of_node() performs an of_node_get() on each iteration, so before breaking out of the loop an of_node_put() is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix PLLE SS coefficientsMark Kuo
The PLLE SS coefficients are different between Tegra210 and Tegra114. Add SoC generation specific versions for Tegra114 and Tegra210 and use them in their respective ->enable() callbacks. Signed-off-by: Mark Kuo <mkuo@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix typos around clearing PLLE bits during enableRhyland Klein
While enabling PLLE on both Tegra114 and Tegra210, we should be clearing PLLE_MISC_VREG_BG_CTRL_MASK and PLLE_MISC_VREG_CTRL_MASK not setting them. This patch fixes both places where we incorrectly set instead of cleared those bits. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Do not disable PLLE when under hardware controlMark Kuo
Software should not disable PLLE if PLLE is already put under hardware control. Signed-off-by: Mark Kuo <mkuo@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix pllx dyn step calculationRhyland Klein
The logic for calculating the input rate used when figuring out the proper dynamic steps for pllx was incorrect. It is supposed to be calculated using parent_rate / m but it was just using the parent rate directly, therefore using the wrong step values. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: pll: Fix potential sleeping-while-atomicAndrew Bresticker
Since the ->enable() callback is called with a spinlock held, we cannot call potentially blocking functions such as clk_get_rate() or clk_get_parent(), so use the unlocked versions instead. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> [rklein: Adapted from ChromeOS patch, removing pllu_enable cleanup as it isn't present upstream] Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix the misnaming of nvenc from msencRhyland Klein
When adding the nvenc clock, it was partially named msenc in the code. Since the msenc clock isn't present in Tegra210 and has been replaced by the nvenc clock, its misleading to see it present. Therefore, properly rename it. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-02clk: tegra: Fix naming of MISC registersRhyland Klein
Some register for PLLM and PLLMB were named MISC0 but according to the TRM, they have different names. Sync up the names to make it easier to understand which register they are really referring to. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-01-25clk: tegra: Remove improper flags for lock_enableRhyland Klein
Most PLL's don't actually have LOCK_ENABLE bits. However, most PLL's also had that flag set, which meant that the clk code was trying to enable locks, and inadvertantly flipping bits in other fields. For PLLM, ensure the correct register is used for the misc_register. PLL_MISC0 contains the EN_LCKDET bit which should be used for enabling the lock, and PLLM_MISC1 shouldn't be used at all. Lastly, remove some of the settings which would point to the EN_LCKDET bits for some PLLs. There is no need to enable the locks, and that is done as part of the set_defaults logic already. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-01-25clk: tegra: Fix divider on VI_I2CRhyland Klein
VI-I2C has 16 bits available for its divider. Switch the divider width to 16 instead of 8 so correct rates can be set. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-01-21Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree this time contains one series from Nicolas Pitre that makes the optimized do_div() implementation from the ARM architecture available to all architectures. This also adds stricter type checking for callers of do_div, which has uncovered a number of bugs in existing code, and fixes up the ones we have found" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ARM: asm/div64.h: adjust to generic codde __div64_32(): make it overridable at compile time __div64_const32(): abstract out the actual 128-bit cross product code do_div(): generic optimization for constant divisor on 32-bit machines div64.h: optimize do_div() for power-of-two constant divisors mtd/sm_ftl.c: fix wrong do_div() usage drm/mgag200/mgag200_mode.c: fix wrong do_div() usage hid-sensor-hub.c: fix wrong do_div() usage ti/fapll: fix wrong do_div() usage ti/clkt_dpll: fix wrong do_div() usage tegra/clk-divider: fix wrong do_div() usage imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
2015-12-17clk: tegra: Read correct IDDQ register in PLL_SS registrationBill Huang
This fixes a bug in tegra_clk_register_pllss() which mistakenly assume the IDDQ register is the PLL base address. Signed-off-by: Bill Huang <bilhuang@nvidia.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: Fix WARN_ON in PLL_RE registrationBill Huang
This fixes two things. - Read the correct IDDQ register - Check the correct IDDQ bit position Signed-off-by: Bill Huang <bilhuang@nvidia.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Fix issues with rates for VCO PLLsAndrew Bresticker
Without this change clk_get_rate would return the final output rather than the VCO output as it would factor in the pdiv when it shouldn't. This will cause problems for all dividers in the subtree of the VCO PLL. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: Add support for Tegra210 clocksRhyland Klein
Implement clock support for Tegra210. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: Add Super Gen5 LogicBill Huang
Super clock divider control and clock source mux of Tegra210 has changed a little against prior SoCs, this patch adds Gen5 logic to address those differences. Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add logic for SSBill Huang
Add some logic for Spread Spectrum control. It is used in conjuncture with SDM fractional dividers. SSC has to be disabled when we configure the divider settings. Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add dyn_ramp callbackRhyland Klein
Add a callback to the pll_params for custom dynamic ramping functions which can be specified per PLL. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add Set_default logicBill Huang
Add logic which (if specified for a pll) can verify that a PLL is set to the proper default value and if not can set it. This can be specified per PLL as each will have different default values. Based on original work by Aleksandr Frid <afrid@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Adjust vco_min if SDM presentBill Huang
This code makes use of the SDM fractional divider if present to constrain the allowable programming range of the PLL divider register bitfields to take advantage of higher frequency granularity that can be induced by the SDM divider. Based on original work by Aleksandr Frid <afrid@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add support for PLLMB for Tegra210Rhyland Klein
Tegra210 SoC's have 2 PLLs for memory usage. Add plumbing to register and handle PLLMB. PLLMB is used to allow switching between 2 PLLM's without having to use and intermediate backup PLL, as we need to lock the PLL before we can switch to it. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add specialized logic for Tegra210Rhyland Klein
On Tegra210 SoC's, the logic to enable several of the plls is different from previous generations. Therefore, add registration functions specific to Tegra210 which will handle them appropriately. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Update PLLM handlingDanny Huang
PLLM is fixed for Tegra30 up through Tegra114. Starting with Tegra124 PLLM can change rate. Mark PLLM as TEGRA_PLL_FIXED for the generations where it should be. Modify the check in clk_pll_round_rate() and clk_pll_recalc_rate() to allow for the non-fixed version to return the correct rate. Note that there is no change for Tegra20. This is because PLLM is not distinguished in that driver, and adding either the PLLM or FIXED_RATE flags will cause potential problems. PLLM never supported dynamic ramping. On Tegra20 and Tegra30, there is no dynamic ramping at all, and on Tegra114, Tegra124 and Tegra132, only PLLX and PLLC support dynamic ramping, so we can go ahead and remove the specialized pllm_ops. Signed-off-by: Danny Huang <dahuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Fix _pll_ramp_calc_pll logic and _calc_dynamic_ramp_rateRhyland Klein
This removes the conversion from pdiv to hw, which is already taken care of by _get_table_rate before this code is run. This avoids incorrectly converting pdiv to hw twice and getting the wrong hw value. Also set the input_rate in the freq cfg in _calc_dynamic_ramp_rate while setting all the other fields. In order to prevent regressions on earlier SoC generations, all of the frequency tables need to be updated so that they contain the actual divider values. If they contain hardware values these would be converted to hardware values again, yielding the wrong value. Signed-off-by: Rhyland Klein <rklein@nvidia.com> [treding@nvidia.com: fix regressions on earlier SoC generations] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Add code to handle if resets are supported by PLLBill Huang
If a PLL has a reset_reg specified, properly handle that in the enable/disable logic paths. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Add logic for out-of-table rates for T210Rhyland Klein
For Tegra210, the logic to calculate out-of-table rates is different from previous generations. Add callbacks that can be overridden to allow for different ways of calculating rates. Default to _cal_rate when not specified. This patch also includes a new flag which is used to set which method of fixed_mdiv calculation is used. The new method for calculating the fixed divider value for M can be more accurate especially when fractional dividers are in play. This allows for older chipsets to use the existing logic and new generations to use a newer version which may work better for them. Based on original work by Aleksandr Frid <afrid@nvidia.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Add logic for handling SDM dataRhyland Klein
This adds logic for taking SDM_DIN (Sigma Delta Modulator) setting into the equation to calculate the effective N value for PLL which supports fractional divider. The effective N = NDIV + 1/2 + SDM_DIN/2^13, where NDIV is the integer feedback divider. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Don't unconditionally set LOCK flagsRhyland Klein
SoC specific drivers should define the appropriate flags for each PLL rather than relying on the registration functions to automatically set flags on their behalf. This will properly allow for changes between SoC generations where flags might be different and allow sharing the same logic functions. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Change misc_reg count from 3 to 6Bill Huang
New SoC's may have more than 3 MISC registers, so bump up the array size and use a #define to be more informative about the value. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Update warning messageRhyland Klein
Swap out the generic WARN_ON with a WARN which gives more information about what is happening. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Simplify clk_enable_pathRhyland Klein
Instead of having multiple similar wrapper functions for _clk_pll_[enable|disable], we can simplify it to single wrappers and use checks to avoid the logic we don't want to use. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: pll: Add tegra_pll_wait_for_lock to clk headerRhyland Klein
Create a wrapper interface to make use of the existing clk_pll_wait_for_lock. This will be useful for implementations of callbacks in Tegra SoC specific clock drivers. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: periph: Add new periph clks and muxes for Tegra210Rhyland Klein
Tegra210 has significant differences in muxes for peripheral clocks. One of the most important changes is that pll_m isn't to be used as a source for peripherals. Therefore, we need to define the new muxes and new clocks to use those muxes for Tegra210 support. Tegra210 has some differences in the PLLP clock tree: - Four new output clocks: PLLP_OUT_CPU, PLLP_OUT_ADSP, PLLP_OUT_HSIO, and PLLP_OUT_XUSB. - PLLP_OUT2 is fixed at 1/2 the rate of PLLP_VCO. - PLLP_OUT4 is the child of PLLP_OUT_CPU. Update the xusb_hs_src mux and add the xusb_ssp_src mux for Tegra210. Including work by Andrew Bresticker <abrestic@chromium.org> and Bill Huang <bilhuang@nvidia.com>. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-20clk: tegra: Constify pdiv-to-hw mappingsThierry Reding
This is static data that is never modified, so make it const. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-18clk: tegra: Format tables consistentlyThierry Reding
Use spaces around { and } and pad values so that the cells are properly aligned. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-18clk: tegra: Miscellaneous coding style cleanupsThierry Reding
Use unsigned int for loop variables that can never become negative and remove a couple of gratuitous blank lines. Also use single spaces around operators and use a single space instead of a tab to separate comments from code. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-18clk: tegra: Fix 26 MHz oscillator frequencyThierry Reding
The OSC_FREQ field of the OSC_CTRL register uses the value 12 for an oscillator frequency of 26 MHz, not 260 MHz. This isn't really critical because I don't think boards with such an oscillator have ever existed, much less been supported upstream. Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v0.10.2 at 2024-07-30 20:20:32 (GMT)