summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-10-14Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix for handling dependencies of *-objs targets by Masahiro Yamada - lots of cleanups in the kbuild machinery, also by Masahiro - fixes for the kconfig build to use an UTF-8 capable ncurses library if possible and to build on not-so-standard installs - some more minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Do not reference *-n variables in the Makefile kbuild: simplify build, clean, modbuiltin shorthands kbuild: arm: Do not define "comma" twice kbuild: remove obj-n and lib-n handling kbuild: remove unnecessary variable initializaions kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: handle C=... and M=... after entering into build directory kbuild: use $(Q) for sub-make target kbuild: fake the "Entering directory ..." message more simply kconfig/lxdialog: get ncurses CFLAGS with pkg-config kconfig: nconfig: fix multi-byte UTF handling kconfig: lxdialog: fix spelling kbuild: Make scripts executable kbuild: remove redundant clean-files from scripts/kconfig/Makefile kbuild: refactor script/kconfig/Makefile kbuild: handle the dependency of multi-objs hostprogs appropriately kbuild: handle multi-objs dependency appropriately
2014-10-14clk: RK808: add clkout driver for RK808Chris Zhong
This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> says: Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-08Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
2014-10-05clk: pxa clocks build system fixRobert Jarzmik
Fix the building of pxa clock drivers so that the files are actually compiled if and only if COMMON_CLK was selected by the architecture. This prevents conflicts with mach-pxa clock legacy implementation. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-10-03Merge tag 'clk-mvebu-3.18-2' of git://git.infradead.org/linux-mvebu into ↵Mike Turquette
clk-next clock mvebu changes for v3.18 (round 2) - armada 370/375 - Fix SSCG node lookup
2014-10-02kbuild: remove unnecessary "obj- := dummy.o" trickMasahiro Yamada
In these Makefiles, at least one of "obj-y" and "obj-" is non-empty, hence built-in.o is always created without such a trick. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> [shmobile] Acked-by: David S. Miller <davem@davemloft.net> [networking] Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-10-01Merge tag 'v3.18-rockchip-clk2' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Allow parent rate changes for i2s on rk3288 and rockchip as well as s3c24xx restart handlers.
2014-10-01clk: samsung: register restart handlers for s3c2412 and s3c2443Heiko Stübner
S3C2412, S3C2443 and their derivatives contain a special software-reset register in their system-controller. Therefore register a restart handler for those. Tested on a s3c2416-based board, s3c2412 compile-tested. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-10-01clk: rockchip: add restart handlerHeiko Stübner
Add infrastructure to write the correct value to the restart register and register the restart notifier for both rk3188 (including rk3066) and rk3288. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-10-01clk: rockchip: rk3288: i2s_frac adds flag to set parent's rateJianqun
The relation of i2s nodes as follows: i2s_src 0 0 594000000 0 i2s_frac 0 0 11289600 0 i2s_pre 0 0 11289600 0 sclk_i2s0 0 0 11289600 0 i2s0_clkout 0 0 11289600 0 hclk_i2s0 1 1 99000000 0 sclk_i2s0 is the master clock, when to set rate of sclk_i2s0, should allow to set its parent's rate, by add flag CLK_SET_RATE_PARENT for "i2s_frac", "i2s_pre", "i2s0_clkout" and "sclk_i2s0". Tested on rk3288 board using max98090, with command "aplay <music.wav>" Change-Id: I12faad082566532b65a7de8c0a6845e1c17870e6 Signed-off-by: Jianqun <jay.xu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-30Merge branch 'clk-pxa27x' into clk-nextMike Turquette
2014-09-30clk: add pxa27x clock driversRobert Jarzmik
Move pxa27x clock drivers from arch/arm/mach-pxa to driver/clk. In the move : - convert to new clock framework legacy clocks - provide clocks as before for platform data based boards - provide clocks through devicetree Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-30clk: add pxa clocks infrastructureRobert Jarzmik
Add a the common code used by all PXA variants. This is the first step in the transition from architecture defined clocks (in arch/arm/mach-pxa) towards clock framework. The goal is to have the same features (and not all the features) of the existing clocks, and enable the transition of PXA to device-tree. All PXA rely on a "CKEN" type clock, which : - has a gate (bit in CKEN register) - is generated from a PLL, generally divided - has an alternate low power clock Each variant will specialize the CKEN clock : - pxa25x have no low power clock - pxa27x in low power use always the 13 MHz ring oscillator - pxa3xx in low power have specific dividers for each clock The device-tree provides a list of CLK_* (ex: CLK_USB or CLK_I2C) to get a handle on the clock. While pxa-clock.h will describe all the clocks of all the variants, each variant will only use a subset of it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-30clk: gpio-gate: Ensure gpiod_ APIs are prototypedMark Brown
The gpio-gate clock uses the gpiod_ APIs but does not directly include the header for them causing build failures in some configurations including ARM allnoconfig. Include the header directly. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-30Merge tag 'for_3.18/samsung-clk' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next Samsung clock patches for v3.18 1) non-critical fixes (without the need to push to stable) fa0111be4ff3 clk: samsung: exynos4: remove duplicate div_core2 divider clock instantiation b511593d7165 clk: samsung: exynos4: fix g3d clocks c14254300131 clk: samsung: exynos4: add missing smmu_g2d clock and update comments 22842d244af3 clk: samsung: exynos5260: fix typo in clock name e82ba578ccde clk: samsung: exynos3250: fix width field of mout_mmc0/1 59037b92f440 clk: samsung: exynos3250: fix width and shift of div_spi0_isp clock 5ce37f266650 clk: samsung: exynos3250: fix mout_cam_blk parent list 2) Clock driver extensions 07ccf02ba5c3 dt-bindings: clk: samsung: Document the DMC domain of Exynos3250 CMU d0e73eaf1925 ARM: dts: exynos3250: Add CMU node for DMC domain clocks e3c3f19bc618 clk: samsung: exynos3250: Register DMC clk provider 4676f0aab9dc clk: samsung: exynos4: add support for MOUT_HDMI and MOUT_MIXER clocks
2014-09-30Merge branch 'for-v3.18/ti-clk-driver' of github.com:t-kristo/linux-pm into ↵Mike Turquette
clk-next
2014-09-29clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safePeter Ujfalusi
It is safe to call the pm sync calls in interrupt context in this driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-09-29clk: ti: LLVMLinux: Move __init outside of type definitionBehan Webster
As written, the __init for ti_clk_get_div_table is in the middle of the return type. The gcc documentation indicates that section attributes should be added to the end of the function declaration: extern void foobar (void) __attribute__ ((section ("bar"))); However gcc seems to be very permissive with where attributes can be placed. clang on the other hand isn't so permissive, and fails if you put the section definition in the middle of the return type: drivers/clk/ti/divider.c:298:28: error: expected ';' after struct static struct clk_div_table ^ ; drivers/clk/ti/divider.c:298:1: warning: 'static' ignored on this declaration [-Wmissing-declarations] static struct clk_div_table ^ drivers/clk/ti/divider.c:299:9: error: type specifier missing, defaults to 'int' [-Werror,-Wimplicit-int] __init *ti_clk_get_div_table(struct device_node *node) ~~~~~~ ^ drivers/clk/ti/divider.c:345:9: warning: incompatible pointer types returning 'struct clk_div_table *' from a function with result type 'int *' [-Wincompatible-pointer-types] return table; ^~~~~ drivers/clk/ti/divider.c:419:9: warning: incompatible pointer types assigning to 'const struct clk_div_table *' from 'int *' [-Wincompatible-pointer-types] *table = ti_clk_get_div_table(node); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 3 warnings and 2 errors generated. By convention, most of the kernel code puts section attributes between the return type and function name. In the case where the return type is a pointer, it's important to place the '*' on left of the __init. This updated code works for both gcc and clang. Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Mark Charlebois <charlebm@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-09-29clk: ti: consider the fact that of_clk_get() might return an errorSebastian Andrzej Siewior
I "forgot" to update the dtb and the kernel crashed: |Unable to handle kernel NULL pointer dereference at virtual address 0000002e |PC is at __clk_get_flags+0x4/0xc |LR is at ti_dt_clockdomains_setup+0x70/0xe8 because I did not have the clock nodes. of_clk_get() returns an error pointer which is not checked here. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-09-29clk: ti: dra7-atl-clock: fix a memory leakTero Kristo
of_clk_add_provider makes an internal copy of the parent_names property while its called, thus it is no longer needed after this call and can be freed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2014-09-29clk: ti: change clock init to use generic of_clk_initTero Kristo
Previously, the TI clock driver initialized all the clocks hierarchically under each separate clock provider node. Now, each clock that requires IO access will instead check their parent node to find out which IO range to use. This patch allows the TI clock driver to use a few new features provided by the generic of_clk_init, and also allows registration of clock nodes outside the clock hierarchy (for example, any external clocks.) Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Stefan Assmann <sassmann@kpanic.de> Acked-by: Tony Lindgren <tony@atomide.com>
2014-09-28Merge tag 'hix5hd2-clock-for-3.18-v2' of ↵Mike Turquette
git://github.com/hisilicon/linux-hisi into clk-next Hisilicon HiX5HD2 clock updates for 3.18-v2 - Add I2C clocks - Add watchdog clocks - Add sd clocks - Add complex clock implementation to support sata, usb and ethernet
2014-09-28clk: hix5hd2: add I2C clocksWei Yan
hix5hd2 add I2C clocks (I2C0~i2C5) Signed-off-by: Wei Yan <sledge.yanwei@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28clk: hix5hd2: add watchdog0 clocksGuoxiong Yan
hix5hd2 add watchdog0 clocks Signed-off-by: Guoxiong Yan <yanguoxiong@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28clk: hix5hd2: add sd clkJiancheng Xue
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28clk: hix5hd2: add complex clkZhangfei Gao
Support clk of sata, usb and ethernet Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-27clk: use uninitialized_var instead setting 'flags' to 0 directly.Xiubo Li
Setting 'flags' to zero will be certainly a misleading way to avoid warning of 'flags' may be used uninitialized. uninitialized_var is a correct way because the warning is a false possitive. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-27Merge tag 'sunxi-clocks-for-3.18' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Allwinner Clocks Additions for 3.18 The most important part of this serie is the addition of the phase API to handle the MMC clocks in the Allwinner SoCs. Apart from that, the A23 gained a new mbus driver, and there's a fix for a incorrect divider table on the APB0 clock.
2014-09-27Merge tag 'v3.18-rockchip-cpuclk' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next CPU clock handling for Rockchip SoCs
2014-09-27clk: rockchip: switch to using the new cpuclk type for armclkHeiko Stuebner
This adds the necessary soc-specific divider values and switches the armclk to use the newly introduced cpuclk type. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: add new clock-type for the cpuclkHeiko Stuebner
When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: make tightly bound armclk child-clocks read-onlyHeiko Stuebner
Rockchip SoCs contain clocks tightly bound to the armclk, where the best rate / divider is supplied by the vendor after careful measuring. Often this ideal rate may be greater than the current rate. Therefore prevent the ccf from trying to set these dividers itself by setting them to read-only. In the case of the rk3066, this also includes the aclk_cpu, which makes it necessary to also split its direct child-clocks (pclk_cpu, hclk_cpu, ...) into individual definitions for rk3066 and rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: reparent aclk_cpu_pre to the gpllHeiko Stuebner
aclk_cpu_pre on the rk3188 can either be sourced from the armclk or the gpll. To reduce complexity on apll changes caused by cpufreq, reparent it always to the gpll source. If really necessary it could be reparented back on a per board level using the assigned-clocks mechanism. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27clk: rockchip: fix rk3288 pll status register locationJianqun
In RK3288, APLL lock status bit is in GRF_SOC_STATUS1, but in RK3188, is GRFSOC_STATUS0. Signed-off-by: Jianqun <jay.xu@rock-chips.com> Also name the constant accordingly as GRF_SOC_STATUS1 to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: fix rk3066 pll status register locationHeiko Stuebner
The register providing the pll lock status is at a different address on the rk3066. The error became apparent while working on cpufreq support for the rockchip SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27clk: rockchip: change pll rate without a clk-notifierDoug Anderson
The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27clk: sunxi: Add sun8i MBUS clock supportChen-Yu Tsai
The MBUS clock on sun8i is slightly different from the old mod0 clocks. The divider is 3 bits wider, while also needing a divider table for the higher 4 values, which all set the same divider. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-09-27clk: sunxi: mod0: Introduce MMC proper phase handlingMaxime Ripard
The MMC clock we thought we had until now are actually not one but three different clocks. The main one is unchanged, and will have three outputs: - The clock fed into the MMC - a sample and output clocks, to deal with when should we output/sample data to/from the MMC bus The phase control we had are actually controlling the two latter clocks, but the main MMC one is unchanged. We can adjust the phase with a 3 bits value, from 0 to 7, 0 meaning a 180 phase shift, and the other values being the number of periods from the MMC parent clock to outphase the clock of. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: Move mbus to mod0 fileMaxime Ripard
Move the MBUS clock to the module clocks file. It's pretty trivial, but still requires to enable the clocks to make sure it won't get disabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: Move mod0 clock to a file of its ownMaxime Ripard
Since we know have the ability to declare factors clock outside of clk-sunxi, create a new mod0 driver to deal with the mod0 clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: Introduce mbus compatibleMaxime Ripard
Even though the mbus clock is a regular module clock, given its nature, it needs to be enabled all the time. Introduce a new compatible, to differentiate it from the other module clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: sunxi: factors: Invert the probing logicMaxime Ripard
Until now, the factors clock probing was done directly by sunxi_init_clocks, with the factors registration being called directly with the clocks data passed as an argument. This approch has shown its limits when we added more clocks, since we couldn't really split code with such a logic in smaller files, and led to a huge file having all the clocks. Introduce an intermediate probing function, so that factor clocks will be able to directly be called by CLK_OF_DECLARE, which will in turn ease the split into several files. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: Add a function to retrieve phaseMaxime Ripard
The current phase API doesn't look into the actual hardware to get the phase value, but will rather get it from a variable only set by the set_phase function. This will cause issue when the client driver will never call the set_phase function, where we can end up having a reported phase that will not match what the hardware has been programmed to by the bootloader or what phase is programmed out of reset. Add a new get_phase function for the drivers to implement so that we can get this value. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27clk: introduce clk_set_phase function & callbackMike Turquette
A common operation for a clock signal generator is to shift the phase of that signal. This patch introduces a new function to the clk.h API to dynamically adjust the phase of a clock signal. Additionally this patch introduces support for the new function in the common clock framework via the .set_phase call back in struct clk_ops. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-09-27Merge tag 'clk-mvebu-3.18' of git://git.infradead.org/linux-mvebu into clk-nextMike Turquette
clock changes for mvebu for v3.18 - correct timer drift caused by SSCG deviation - fix typo in comment
2014-09-26clk: add gpio gated clockJyri Sarha
The added gpio-gate-clock is a basic clock that can be enabled and disabled trough a gpio output. The DT binding document for the clock is also added. For EPROBE_DEFER handling the registering of the clock has to be delayed until of_clk_get() call time. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-26Merge tag 'qcom-clocks-for-3.18' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into clk-next qcom clock changes for 3.18 Some fixes for the IPQ driver and some code consolidation and refactoring.
2014-09-26Merge tag 'tegra-clk-3.18' of ↵Mike Turquette
git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next Tegra clk updates for 3.18