summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2014-06-16Merge tag 'clk-for-linus-3.16-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-11clk: sunxi: add PRCM (Power/Reset/Clock Management) clks supportBoris BREZILLON
The PRCM (Power/Reset/Clock Management) unit provides several clock devices: - AR100 clk: used to clock the Power Management co-processor - AHB0 clk: used to clock the AHB0 bus - APB0 clk and gates: used to clk peripherals connected to the APB0 bus Add support for these clks in a separate driver so that they can be probed as platform devices instead of registered during early init. This is needed to be able to probe PRCM MFD subdevices. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sun6i: Protect SDRAM gating bitMaxime Ripard
Prevent the SDRAM controller from being gated by force-enabling it in the machine code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sun6i: Protect CPU clockMaxime Ripard
Right now, AHB is an indirect child clock of the CPU clock. If that happens to change, since the CPU clock has no other consumers declared in Linux, it would be shut down, which is not really a good idea. Prevent this by forcing it enabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sunxi: Rework clock protection codeMaxime Ripard
Since we start to have a lot of clocks to protect, some of them in a few SoCs only, it becomes difficult to handle the clock protection without having to add per machine exceptions. Add per-SoC data to tell which clock to leave enabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sunxi: Move the GMAC clock to a file of its ownMaxime Ripard
Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The gmac clock is pretty easy to deal with, since it's pretty much isolated and doesn't have any dependency on the other clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sunxi: Move the 24M oscillator to a file of its ownMaxime Ripard
Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The main oscillator is pretty easy to deal with, since it's pretty much isolated. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sunxi: Remove calls to clk_putMaxime Ripard
Callers of clk_put must disable the clock first. This also means that as long as the clock is enabled the driver should hold a reference to that clock. Hence, the call to clk_put here are bogus and should be removed. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-11clk: sunxi: Implement A31 USB clockMaxime Ripard
The A31 USB clock slightly differ from its older counterparts, mostly because it has a different gate for each PHY, while the older one had a single gate for all the phy. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
2014-06-10Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into ↵Mike Turquette
clk-next
2014-06-08Merge tag 'clk-for-linus-3.16' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux into next Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.16 are pretty typical: mostly clock driver additions and fixes. There are additions to the clock core code for some of the basic types (e.g. the common divider type has some fixes and featured added to it). One minor annoyance is a last-minute dependency that wasn't handled quite right. Commit ba0fae3b06a6 ("clk: berlin: add core clock driver for BG2/BG2CD") in this pull request depends on include/dt-bindings/clock/berlin2.h, which is already in your tree via the arm-soc pull request. Building for the berlin platform will break when the clk tree is built on it's own, but merged into your master branch everything should be fine" * tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits) mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs clk: export __clk_round_rate for providers clk: versatile: free icst on error return clk: qcom: Return error pointers for unimplemented clocks clk: qcom: Support msm8974pro global clock control hardware clk: qcom: Properly support display clocks on msm8974 clk: qcom: Support display RCG clocks clk: qcom: Return highest rate when round_rate() exceeds plan clk: qcom: Fix mmcc-8974's PLL configurations clk: qcom: Fix clk_rcg2_is_enabled() check clk: berlin: add core clock driver for BG2Q clk: berlin: add core clock driver for BG2/BG2CD clk: berlin: add driver for BG2x complex divider cells clk: berlin: add driver for BG2x simple PLLs clk: berlin: add driver for BG2x audio/video PLL clk: st: Terminate of match table clk/exynos4: Fix compilation warning ARM: shmobile: r8a7779: Add clock index macros for DT sources clk: divider: Fix overflow in clk_divider_bestdiv clk: u300: Terminate of match table ...
2014-06-06CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher ↵Nishanth Menon
frequencies MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). So provide support to setup required data to handle Duty cycle by the setting up the minimum frequency for DPLL. 1.4GHz is common for all these devices and is based on Technical Reference Manual information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and equivalent information from DRA75x, DRA72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Nishanth Menon <nm@ti.com> [t-kristo@ti.com: updated for latest dpll init API call] Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-06-06CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ckPeter Ujfalusi
In order to get correct clock dividers for AESS/ABE we need to set the dpll_abe_m2x2_ck rate to be double of dpll_abe_ck. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-06-04Merge tag 'devicetree-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next Pull DeviceTree updates from Rob Herring: - Another round of clean-up of FDT related code in architecture code. This removes knowledge of internal FDT details from most architectures except powerpc. - Conversion of kernel's custom FDT parsing code to use libfdt. - DT based initialization for generic serial earlycon. The introduction of generic serial earlycon support went in through the tty tree. - Improve the platform device naming for DT probed devices to ensure unique naming and use parent names instead of a global index. - Fix a race condition in of_update_property. - Unify the various linker section OF match tables and fix several function prototype errors. - Update platform_get_irq_byname to work in deferred probe cases. - 2 binding doc updates * tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits) of: handle NULL node in next_child iterators of/irq: provide more wrappers for !CONFIG_OF devicetree: bindings: Document micrel vendor prefix dt: bindings: dwc2: fix required value for the phy-names property of_pci_irq: kill useless variable in of_irq_parse_pci() of/irq: do irq resolution in platform_get_irq_byname() of: Add a testcase for of_find_node_by_path() of: Make of_find_node_by_path() handle /aliases of: Create unlocked version of for_each_child_of_node() lib: add glibc style strchrnul() variant of: Handle memory@0 node on PPC32 only pci/of: Remove dead code of: fix race between search and remove in of_update_property() of: Use NULL for pointers of: Stop naming platform_device using dcr address of: Ensure unique names without sacrificing determinism tty/serial: pl011: add DT based earlycon support of/fdt: add FDT serial scanning for earlycon of/fdt: add FDT address translation support serial: earlycon: add DT support ...
2014-06-04Merge tag 'pm+acpi-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next Pull ACPI and power management updates from Rafael Wysocki: "ACPICA is the leader this time (63 commits), followed by cpufreq (28 commits), devfreq (15 commits), system suspend/hibernation (12 commits), ACPI video and ACPI device enumeration (10 commits each). We have no major new features this time, but there are a few significant changes of how things work. The most visible one will probably be that we are now going to create platform devices rather than PNP devices by default for ACPI device objects with _HID. That was long overdue and will be really necessary to be able to use the same drivers for the same hardware blocks on ACPI and DT-based systems going forward. We're not expecting fallout from this one (as usual), but it's something to watch nevertheless. The second change having a chance to be visible is that ACPI video will now default to using native backlight rather than the ACPI backlight interface which should generally help systems with broken Win8 BIOSes. We're hoping that all problems with the native backlight handling that we had previously have been addressed and we are in a good enough shape to flip the default, but this change should be easy enough to revert if need be. In addition to that, the system suspend core has a new mechanism to allow runtime-suspended devices to stay suspended throughout system suspend/resume transitions if some extra conditions are met (generally, they are related to coordination within device hierarchy). However, enabling this feature requires cooperation from the bus type layer and for now it has only been implemented for the ACPI PM domain (used by ACPI-enumerated platform devices mostly today). Also, the acpidump utility that was previously shipped as a separate tool will now be provided by the upstream ACPICA along with the rest of ACPICA code, which will allow it to be more up to date and better supported, and we have one new cpuidle driver (ARM clps711x). The rest is improvements related to certain specific use cases, cleanups and fixes all over the place. Specifics: - ACPICA update to upstream version 20140424. That includes a number of fixes and improvements related to things like GPE handling, table loading, headers, memory mapping and unmapping, DSDT/SSDT overriding, and the Unload() operator. The acpidump utility from upstream ACPICA is included too. From Bob Moore, Lv Zheng, David Box, David Binderman, and Colin Ian King. - Fixes and cleanups related to ACPI video and backlight interfaces from Hans de Goede. That includes blacklist entries for some new machines and using native backlight by default. - ACPI device enumeration changes to create platform devices rather than PNP devices for ACPI device objects with _HID by default. PNP devices will still be created for the ACPI device object with device IDs corresponding to real PNP devices, so that change should not break things left and right, and we're expecting to see more and more ACPI-enumerated platform devices in the future. From Zhang Rui and Rafael J Wysocki. - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it to handle system suspend/resume on Asus T100 correctly. From Heikki Krogerus and Rafael J Wysocki. - PM core update introducing a mechanism to allow runtime-suspended devices to stay suspended over system suspend/resume transitions if certain additional conditions related to coordination within device hierarchy are met. Related PM documentation update and ACPI PM domain support for the new feature. From Rafael J Wysocki. - Fixes and improvements related to the "freeze" sleep state. They affect several places including cpuidle, PM core, ACPI core, and the ACPI battery driver. From Rafael J Wysocki and Zhang Rui. - Miscellaneous fixes and updates of the ACPI core from Aaron Lu, Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki. - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony Camuso, and Toshi Kani. - System suspend/resume optimization in the ACPI battery driver from Lan Tianyu. - OPP (Operating Performance Points) subsystem updates from Chander Kashyap, Mark Brown, and Nishanth Menon. - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat, Stratos Karafotis, and Viresh Kumar. - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q, s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris, Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and Viresh Kumar. - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug Smythies, and Stratos Karafotis. - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown. - Fix for the cpuidle menu governor from Chander Kashyap. - New ARM clps711x cpuidle driver from Alexander Shiyan. - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter, Fabian Frederick, Pali Rohár, and Sebastian Capella. - Intel RAPL (Running Average Power Limit) driver updates from Jacob Pan. - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick. - devfreq core updates from Chanwoo Choi and Paul Bolle. - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and Bartlomiej Zolnierkiewicz. - turbostat tool fix from Jean Delvare. - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra and Thomas Renninger. - New ACPI ec_access.c tool for poking at the EC in a safe way from Thomas Renninger" * tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits) ACPICA: Namespace: Remove _PRP method support. intel_pstate: Improve initial busy calculation intel_pstate: add sample time scaling intel_pstate: Correct rounding in busy calculation intel_pstate: Remove C0 tracking PM / hibernate: fixed typo in comment ACPI: Fix x86 regression related to early mapping size limitation ACPICA: Tables: Add mechanism to control early table checksum verification. ACPI / scan: use platform bus type by default for _HID enumeration ACPI / scan: always register ACPI LPSS scan handler ACPI / scan: always register memory hotplug scan handler ACPI / scan: always register container scan handler ACPI / scan: Change the meaning of missing .attach() in scan handlers ACPI / scan: introduce platform_id device PNP type flag ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI / scan: .match() callback for ACPI scan handlers ACPI / battery: wakeup the system only when necessary power_supply: allow power supply devices registered w/o wakeup source ...
2014-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge branch 'pm-clk'Rafael J. Wysocki
* pm-clk: clk: new basic clk type for fractional divider
2014-06-03clk: export __clk_round_rate for providersArnd Bergmann
Commit 99cbd064b0 ("clk: qcom: Support display RCG clocks") adds a use of the __clk_round_rate in a clock provided that can be built as a loadable module. This exports the symbol to avoid the build error from compiling the qcom clock as a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-06-02Merge tag 'drivers-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC driver changes from Olof Johansson: "SoC-near driver changes that we're merging through our tree. Mostly because they depend on other changes we have staged, but in some cases because the driver maintainers preferred that we did it this way. This contains a largeish cleanup series of the omap_l3_noc bus driver, cpuidle rework for Exynos, some reset driver conversions and a long branch of TI EDMA fixes and cleanups, with more to come next release. The TI EDMA cleanups is a shared branch with the dmaengine tree, with a handful of Davinci-specific fixes on top. After discussion at last year's KS (and some more on the mailing lists), we are here adding a drivers/soc directory. The purpose of this is to keep per-vendor shared code that's needed by different drivers but that doesn't fit into the MFD (nor drivers/platform) model. We expect to keep merging contents for this hierarchy through arm-soc so we can keep an eye on what the vendors keep adding here and not making it a free-for-all to shove in crazy stuff" * tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM tty: serial: msm: Remove direct access to GSBI power: reset: keystone-reset: introduce keystone reset driver Documentation: dt: add bindings for keystone pll control controller Documentation: dt: add bindings for keystone reset driver soc: qcom: fix of_device_id table ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos ARM: EXYNOS: Move the driver to drivers/cpuidle directory ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c ARM: EXYNOS: Pass the AFTR callback to the platform_data ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier ARM: EXYNOS: Move the AFTR state function into pm.c ARM: EXYNOS: Encapsulate the AFTR code into a function ARM: EXYNOS: Disable cpuidle for exynos5440 ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle ARM: EXYNOS: Remove ifdef for scu_enable in pm ARM: EXYNOS: Move scu_enable in the cpu_pm notifier ARM: EXYNOS: Use the cpu_pm notifier for pm ...
2014-06-02Merge tag 'dt-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
2014-06-02Merge tag 'soc-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
2014-06-02Merge tag 'cleanup-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC cleanups from Olof Johansson: "Cleanups for 3.16. Among these are: - a bunch of misc cleanups for Broadcom platforms, mostly housekeeping - enabling Common Clock Framework on the older s3c24xx Samsung chipsets - cleanup of the Versatile Express system controller code, moving it to syscon - power management cleanups for OMAP platforms plus a handful of other cleanups across the place" * tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM clk: samsung: fix build error ARM: vexpress: refine dependencies for new code clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit ARM: OMAP2+: PRCM: cleanup some header includes ...
2014-05-31Merge tag 'samsung-drivers-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers Merge "Samsung 2nd drivers for 3.16" from Kukjin Kim: This is including fix exynos cpufreq driver compilation with ARCH_MULTIPLATFORM. Even though this is a work around, this is required for support exynos multiplatform for a while and will be updated in near future. This is based on tags/samsung-exynos. * tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits) cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: dts: Remove g2d_pd node for exynos5420 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-31Merge tag 'samsung-clk-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung 3rd clock updates for 3.16" from Kukjin Kim: - add clock for new exynos5410 SoC * tag 'samsung-clk-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: exynos5410: register clocks using common clock framework Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-31clk: versatile: free icst on error returnColin Ian King
commit a183da63 introduced a new error return path that does not kfree icst if the kmemdup of desc->params fails. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-30Merge branch 'v3.16-next/cleanup-samsung' into v3.16-next/platform-exynosKukjin Kim
2014-05-30clk: exynos5410: register clocks using common clock frameworkTarek Dakhran
The EXYNOS5410 clocks are statically listed and registered using the Samsung specific common clock helper functions. Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-29Merge tag 'omap-for-v3.16/dt-part3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dt fixes and and clocks for v3.16 merge window" from Tony Lindgren: Most likely the last pull request from me for omap changes for v3.16 that's dts fixes for clocks and enabling few features that were still being discussed earlier: - A bunch of omap clock related dts fixes queued by Tero Kristo. - Enable parallel nand on am437x that was not merged earlier as I requested more information about the muxing for it. And we need to also enable ecc hardware support for am43xx. - Enable the modem support for n900 that was dropped earlier because we had to fix the related hwmod entry first with patch ARM: OMAP2+: Fix ssi hwmod entry to allow idling. - And finally, add the omap2 clock dts files. These will allow us to enable the dt clocks and drop the legacy clocks for omap2 with a follow-up patch once the related clock driver binding changes are merged. * tag 'omap-for-v3.16/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap2 clock data ARM: dts: am437x-gp-evm: add support for parallel NAND flash ARM: OMAP2+: gpmc: enable BCH_HW ecc-scheme for AM43xx platforms ARM: dts: omap3 a83x: fix duplicate usb pin config ARM: dts: omap3: set mcbsp2 status ARM: dts: omap3-n900: Add modem support ARM: dts: omap3-n900: Add SSI support ARM: OMAP2+: Fix ssi hwmod entry to allow idling ARM: dts: AM4372: clk: efuse based crystal frequency detect ARM: dts: am43xx-clocks.dtsi: add ti, set-rate-parent to display clock path ARM: dts: omap5-clocks.dtsi: add ti, set-rate-parent to dss_dss_clk ARM: dts: omap4: add twd clock to DT ARM: dts: omap54xx-clocks: Correct abe_iclk clock node ARM: dts: omap54xx-clocks: remove the autoidle properties for clock nodes ARM: dts: am43x-clock: add tbclk data for ehrpwm ARM: dts: am33xx-clock: Fix ehrpwm tbclk data ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck ARM: dts: am43xx-clocks: use ti, fixed-factor-clock for dpll_per_clkdcoldo Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29Merge tag 'samsung-clk-2' of ↵Olof Johansson
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung 2nd clock updates for 3.16" from Kukjin Kim: - Add missing sysmmu clocks for DISP and ISP blocks for exynos5250 * tag 'samsung-clk-2' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29Merge tag 'exynos-cpuidle' of ↵Olof Johansson
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers Merge "Samsung exynos-cpuidle updates for v3.16" from Kukjin Kim: - From Daniel Lezcano: This patchset relies on the cpm_pm notifier to initiate the powerdown sequence operations from pm.c instead cpuidle.c. Thus the cpuidle driver is no longer dependent from arch specific code as everything is called from the pm.c file. * tag 'exynos-cpuidle' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (94 commits) ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos ARM: EXYNOS: Move the driver to drivers/cpuidle directory ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c ARM: EXYNOS: Pass the AFTR callback to the platform_data ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier ARM: EXYNOS: Move the AFTR state function into pm.c ARM: EXYNOS: Encapsulate the AFTR code into a function ARM: EXYNOS: Disable cpuidle for exynos5440 ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle ARM: EXYNOS: Remove ifdef for scu_enable in pm ARM: EXYNOS: Move scu_enable in the cpu_pm notifier ARM: EXYNOS: Use the cpu_pm notifier for pm ARM: EXYNOS: Fix S5P_WAKEUP_STAT call for cpuidle ARM: EXYNOS: Move some code inside the idle_finisher for cpuidle ARM: EXYNOS: Encapsulate register access inside a function for pm ARM: EXYNOS: Change function name prefix for cpuidle ARM: EXYNOS: Use cpuidle_register ARM: EXYNOS: Prevent forward declaration for cpuidle ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29Merge tag 'samsung-clk' of ↵Olof Johansson
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung clock updates for 3.16" from Kukjin Kim: In this time, it is having dependency with arch/arm/ for 3.16, I pulled them into samsung tree from Tomasz under agreement from Mike. - Pull for_3.16/exynos5260 from Tomasz Figa: "This pull request contains patches preparing Samsung Common Clock Framework helpers to support Exynos5260 by adding support for multiple clock providers and then adding clock driver for Exynos5260." - Pull for_3.16/clk_fixes_non_critical from Tomasz Figa: "This pull requests contains a number of non-critical fixes for Samsung clock framework and drivers, including: 1) a series of fixes for Exynos5420 to correct clock definitions and make the driver closer to the documentation, 2) several missing clocks and clock IDs added to Exynos4, Exynos5250 and Exynos5420 drivers, 3) fix for incorrect initialization of clock table with NULL, 4) compiler warning fix." - Pull for_3.16/clk_cleanup from Tomasz Figa: "This pull requests contains minor clean-up related to Samsung clock support, including: 1) move Kconfig entries of Samsung clock drivers to drivers/clk, 2) compile drivers/clk/samsung conditionally when COMMON_CLK_SAMSUNG is selected, 3) remove obsolete Kconfig lines after moving s3c24xx to CCF." - Pull for_3.16/exynos3250 from Tomasz Figa: "This small pull request contains a patch adding clock driver for Exynos3250, which depends on previous pull requests in this series." - add dt bindings for exynos3250 clock - add exynos5800 specific clocks in current exynos5420 clock Note that this branch is based on s3c24xx ccf branch * tag 'samsung-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (59 commits) clk: exynos5420: Add 5800 specific clocks dt-bindings: add documentation for Exynos3250 clock controller ARM: S3C24XX: fix merge conflict clk: samsung: exynos3250: Add clocks using common clock framework drivers: clk: use COMMON_CLK_SAMSUNG for Samsung clock support ARM: S3C24XX: move S3C24XX clock Kconfig options to Samsung clock Kconfig file ARM: select COMMON_CLK_SAMSUNG for ARCH_EXYNOS and ARCH_S3C64XX clk: samsung: add new Kconfig for Samsung common clock option ARM: S3C24XX: Remove omitted Kconfig selects and conditionals clk: samsung: exynos5420: add more registers to restore list clk: samsung: exynos5420: add misc clocks clk: samsung: exynos5420: update clocks for MAU Block clk: samsung: exynos5420: fix register offset for sclk_bpll clk: samsung: exynos5420: correct sysmmu-mfc parent clocks clk: samsung: exynos5420: update clocks for FSYS and FSYS2 blocks clk: samsung: exynos5420: update clocks for WCORE block clk: samsung: exynos5420: update clocks for PERIS and GEN blocks clk: samsung: exynos5420: update clocks for PERIC block clk: samsung: exynos5420: update clocks for DISP1 block clk: samsung: exynos5420: update clocks for G2D and G3D blocks ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29clk: qcom: Return error pointers for unimplemented clocksStephen Boyd
Not all clocks are implemented but client drivers can still request them. Currently we will return a NULL pointer to them if the clock isn't implemented in software but NULL pointers are valid clock pointers. Return an error pointer so that driver's don't proceed without a clock they may actually need. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: qcom: Support msm8974pro global clock control hardwareStephen Boyd
A new PLL (gpll4) is added on msm8974 PRO devices to support a faster sdc1 clock rate. Add support for this and the two new sdcc cal clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: qcom: Properly support display clocks on msm8974Stephen Boyd
The display clocks all source from dedicated phy PLLs within their respective multimedia hardware block. Hook up these PLLs to the display clocks with the appropriate parent mappings, clock flags, and the appropriate clock ops. This should allow the display clocks to work once the appropriate phy PLL driver registers their PLL clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: qcom: Support display RCG clocksStephen Boyd
Add support for the DSI/EDP/HDMI RCG clocks. With the proper display driver in place this should allow us to support display clocks on msm8974 based devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: qcom: Return highest rate when round_rate() exceeds planStephen Boyd
Some drivers may want to call clk_set_rate() with a very large number to force the clock to go as fast as it possibly can without having to know the range between the highest rate and second highest rate. Add support for this by defaulting to the highest rate in the frequency table if we can't find a frequency greater than what is requested. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: qcom: Fix mmcc-8974's PLL configurationsStephen Boyd
We forgot to add the status bit for the PLLs and we were using the wrong register and masks for configuration, leading to unexpected PLL configurations. Fix this. Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: qcom: Fix clk_rcg2_is_enabled() checkStephen Boyd
If the bit is set the clock is off so we should be checking for a clear bit, not a set bit. Invert the logic. Fixes: bcd61c0f535a (clk: qcom: Add support for root clock generators (RCGs)) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: berlin: add core clock driver for BG2QAlexandre Belloni
This driver deals with the core clocks found on Marvell Berlin BG2Q. For the shared register dividers, make use of the corresponding driver and add some single clock muxes and gates for the rest. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: berlin: add core clock driver for BG2/BG2CDSebastian Hesselbarth
This driver deals with the core clocks found on Marvell Berlin BG2 and BG2CD. For the shared register dividers, make use of the corresponding driver and add some single clock muxes and gates for the rest. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: berlin: add driver for BG2x complex divider cellsAlexandre Belloni
This is a driver for the complex divider cells found on Marvell Berlin2 SoCs. The cells come in two flavors: single register cells and shared register cells. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: berlin: add driver for BG2x simple PLLsAlexandre Belloni
This is a clock driver for the simple PLLs found on Berlin SoCs. With repect to PLL registers and features, BG2/BG2CD and BG2Q are slightly different, e.g. different allowed VCO dividers and bit shifts. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29clk: berlin: add driver for BG2x audio/video PLLSebastian Hesselbarth
This is a driver for the AVPLLs built upon a VCO with 8 channels each found on Marvell Berlin2 SoCs. While both VCOs found on BG2/BG2CD share the same register set, sometimes registers shifts for one of the VCOs are a bit off. Nothing serious that should require a separate driver, so deal with both VCOs in a single driver instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-28clk: st: Terminate of match tableStephen Boyd
Failure to terminate this match table can lead to boot failures depending on where the compiler places the match table. Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-28CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)Peter Ujfalusi
Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clockPeter Ujfalusi
To allign the name with the other atl clock names: atlclkin3_ck -> atl_clkin3_ck Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28CLK: TI: gate: add composite interface clock to OMAP2 only buildTero Kristo
Composite interface clock is needed by OMAP2, but it was only built in for OMAP3. Fixed the conditional build flag checks for this. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28ARM: OMAP2: clock: add DT boot support for cpufreq_ckTero Kristo
The clock and clkdev for this are added manually. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28CLK: TI: OMAP2: add clock init supportTero Kristo
Adds support for registering the alias clocks, boot time clock-enable list and disabling autoidle of clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>