summaryrefslogtreecommitdiff
path: root/drivers/cpuidle
AgeCommit message (Collapse)Author
2016-02-16cpuidle: menu: help gcc generate slightly better codeRasmus Villemoes
We know that the avg variable actually ends up holding a 32 bit quantity, since it's an average of such numbers. It is only a u64 because it is temporarily used to hold the sum. Making it an actual u32 allows gcc to generate slightly better code, e.g. when computing the square, it can do a 32x32->64 multiply. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-16cpuidle: menu: avoid expensive square root computationRasmus Villemoes
Computing the integer square root is a rather expensive operation, at least compared to doing a 64x64 -> 64 multiply (avg*avg) and, on 64 bit platforms, doing an extra comparison to a constant (variance <= U64_MAX/36). On 64 bit platforms, this does mean that we add a restriction on the range of the variance where we end up using the estimate (since previously the stddev <= ULONG_MAX was a tautology), but on the other hand, we extend the range quite substantially on 32 bit platforms - in both cases, we now allow standard deviations up to 715 seconds, which is for example guaranteed if all observations are less than 1430 seconds. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-29Merge branches 'pm-cpuidle', 'pm-cpufreq', 'pm-domains' and 'pm-sleep'Rafael J. Wysocki
* pm-cpuidle: cpuidle: coupled: remove unused define cpuidle_coupled_lock cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze * pm-cpufreq: cpufreq: cpufreq-dt: avoid uninitialized variable warnings: cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype cpufreq: Use list_is_last() to check last entry of the policy list cpufreq: Fix NULL reference crash while accessing policy->governor_data * pm-domains: PM / Domains: Fix typo in comment PM / Domains: Fix potential deadlock while adding/removing subdomains PM / domains: fix lockdep issue for all subdomains * pm-sleep: PM: APM_EMULATION does not depend on PM
2016-01-27cpuidle: coupled: remove unused define cpuidle_coupled_lockAnders Roxell
This was found with the -RT patch enabled, but the fix should apply to non-RT also. Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation warning without this fix: ../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock' defined but not used [-Wunused-variable] Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-22cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freezeSudeep Holla
Commit 51164251f5c3 "sched / idle: Drop default_idle_call() fallback from call_cpuidle()" made find_deepest_state() return non-negative value and check all the states with index > 0. Also as a result, find_deepest_state() returns 0 even when enter_freeze callbacks are not implemented and enter_freeze_proper() is called which ends up crashing the kernel. This patch updates the check for index > 0 in cpuidle_enter_freeze and cpuidle_idle_call(when idle_should_freeze is true) to restore the suspend-to-idle functionality in absence of enter_freeze callback. Fixes: 51164251f5c3 "sched / idle: Drop default_idle_call() fallback from call_cpuidle()" Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-21Merge tag 'pm+acpi-4.5-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "This includes fixes on top of the previous batch of PM+ACPI updates and some new material as well. From the new material perspective the most significant are the driver core changes that should allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand. Apart from that, ACPICA is updated to upstream revision 20160108 (cosmetic mostly, but including one fixup on top of the previous ACPICA update) and there are some devfreq updates the didn't make it before (due to timing). A few recent regressions are fixed, most importantly in the cpuidle menu governor and in the ACPI backlight driver and some x86 platform drivers depending on it. Some more bugs are fixed and cleanups are made on top of that. Specifics: - Modify the driver core and the USB subsystem to allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand and fix some bugs on top of these changes (Tomeu Vizoso, Rafael Wysocki). - Update ACPICA to upstream revision 20160108, including updates of the ACPICA's copyright notices, a code fixup resulting from a regression fix that was necessary in the upstream code only (the regression fixed by it has never been present in Linux) and a compiler warning fix (Bob Moore, Lv Zheng). - Fix a recent regression in the cpuidle menu governor that broke it on practically all architectures other than x86 and make a couple of optimizations on top of that fix (Rafael Wysocki). - Clean up the selection of cpuidle governors depending on whether or not the kernel is configured for tickless systems (Jean Delvare). - Revert a recent commit that introduced a regression in the ACPI backlight driver, address the problem it attempted to fix in a different way and revert one more cosmetic change depending on the problematic commit (Hans de Goede). - Add two more ACPI backlight quirks (Hans de Goede). - Fix a few minor problems in the core devfreq code, clean it up a bit and update the MAINTAINERS information related to it (Chanwoo Choi, MyungJoo Ham). - Improve an error message in the ACPI fan driver (Andy Lutomirski). - Fix a recent build regression in the cpupower tool (Shreyas Prabhu)" * tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) cpuidle: menu: Avoid pointless checks in menu_select() sched / idle: Drop default_idle_call() fallback from call_cpuidle() cpupower: Fix build error in cpufreq-info cpuidle: Don't enable all governors by default cpuidle: Default to ladder governor on ticking systems time: nohz: Expose tick_nohz_enabled ACPICA: Update version to 20160108 ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t' ACPICA: Additional 2016 copyright changes ACPICA: Reduce regression fix divergence from upstream ACPICA ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830 ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()" ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses() ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses" ACPI / fan: Improve acpi_device_update_power error message ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700 cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0 MAINTAINERS: Add devfreq-event entry MAINTAINERS: Add missing git repository and directory for devfreq ...
2016-01-19cpuidle: menu: Avoid pointless checks in menu_select()Rafael J. Wysocki
If menu_select() cannot find a suitable state to return, it will return the state index stored in data->last_state_idx. This means that it is pointless to look at the states whose indices are less than or equal to data->last_state_idx in the main loop, so don't do that. Given that those checks are done on every idle state selection, this change can save quite a bit of completely unnecessary overhead. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com>
2016-01-19sched / idle: Drop default_idle_call() fallback from call_cpuidle()Rafael J. Wysocki
After commit 9c4b2867ed7c (cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0) it is clear that menu_select() cannot return negative values. Moreover, ladder_select_state() will never return a negative value too, so make find_deepest_state() return non-negative values too and drop the default_idle_call() fallback from call_cpuidle(). This eliminates one branch from the idle loop and makes the governors and find_deepest_state() handle the case when all states have been disabled from sysfs consistently. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com>
2016-01-15cpuidle: Don't enable all governors by defaultJean Delvare
Since commit d6f346f2d2 (cpuidle: improve governor Kconfig options) the best cpuidle governor is selected automatically. There is little point in additionally selecting the other one as it will not be used, so don't select both governors by default. Being able to select more than one governor is still good for developers booting with cpuidle_sysfs_switch, though. This fixes the second half of kernel BZ #65531. Link: https://bugzilla.kernel.org/show_bug.cgi?id=65531 Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-15cpuidle: Default to ladder governor on ticking systemsJean Delvare
The menu governor is currently the default on all systems. However the documentation claims that the ladder governor is preferred on ticking systems. So bump the rating of the ladder governor when NO_HZ is disabled, or when booting with nohz=off. This fixes the first half of kernel BZ #65531. Link: https://bugzilla.kernel.org/show_bug.cgi?id=65531 Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-15Merge tag 'powerpc-4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Core: - Ground work for the new Power9 MMU from Aneesh Kumar K.V - Optimise FP/VMX/VSX context switching from Anton Blanchard Misc: - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan - Allow wrapper to work on non-english system from Laurent Vivier - Add rN aliases to the pt_regs_offset table from Rashmica Gupta - Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt - Include KVM guest test in all interrupt vectors from Paul Mackerras - Fix DSCR inheritance over fork() from Anton Blanchard - Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng - Print MSR TM bits in oops messages from Michael Neuling - Add TM signal return & invalid stack selftests from Michael Neuling - Limit EPOW reset event warnings from Vipin K Parashar - Remove the Cell QPACE code from Rashmica Gupta - Append linux_banner to exception information in xmon from Rashmica Gupta - Add selftest to check if VSRs are corrupted from Rashmica Gupta - Remove broken GregorianDay() from Daniel Axtens - Import Anton's context_switch2 benchmark into selftests from Michael Ellerman - Add selftest script to test HMI functionality from Daniel Axtens - Remove obsolete OPAL v2 support from Stewart Smith - Make enter_rtas() private from Michael Ellerman - PPR exception cleanups from Michael Ellerman - Add page soft dirty tracking from Laurent Dufour - Add support for Nvlink NPUs from Alistair Popple - Add support for kexec on 476fpe from Alistair Popple - Enable kernel CPU dlpar from sysfs from Nathan Fontenot - Copy only required pieces of the mm_context_t to the paca from Michael Neuling - Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey - Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt - Add HWCAP bits for Power9 from Michael Ellerman - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins - scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand cxl: - cxl: Fix possible idr warning when contexts are released from Vaibhav Jain - cxl: use correct operator when writing pcie config space values from Andrew Donnellan - cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain - cxl: fix build for GCC 4.6.x from Brian Norris - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris - cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan Freescale: - Freescale updates from Scott: Highlights include moving QE code out of arch/powerpc (to be shared with arm), device tree updates, and minor fixes" * tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits) powerpc/module: Handle R_PPC64_ENTRY relocations scripts/recordmcount.pl: support data in text section on powerpc powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff powerpc/mm: Fix _PAGE_PTE breaking swapoff cxl: Enable PCI device ID for future IBM CXL adapter cxl: use -Werror only with CONFIG_PPC_WERROR cxl: fix build for GCC 4.6.x powerpc: Add HWCAP bits for Power9 powerpc/powernv: Reserve PE#0 on NPU powerpc/powernv: Change NPU PE# assignment powerpc/powernv: Fix update of NVLink DMA mask powerpc/powernv: Remove misleading comment in pci.c powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing powerpc: Fix build break due to paca mm_context_t changes cxl: Fix DSI misses when the context owning task exits MAINTAINERS: Update Scott Wood's e-mail address powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery() powerpc: Fix style of self-test config prompts powerpc/powernv: Only delay opal_rtc_read() retry when necessary ...
2016-01-14cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0Rafael J. Wysocki
Commit a9ceb78bc75c (cpuidle,menu: use interactivity_req to disable polling) exposed a bug in menu_select() causing it to return -1 on systems with CPUIDLE_DRIVER_STATE_START equal to zero, although it should have returned 0. As a result, idle states are not entered by CPUs on those systems. Namely, on the systems in question data->last_state_idx is initially equal to -1 and the above commit modified the condition that would have caused it to be changed to 0 to be less likely to trigger which exposed the problem. However, setting data->last_state_idx initially to -1 doesn't make sense at all and on the affected systems it should always be set to CPUIDLE_DRIVER_STATE_START (ie. 0) unconditionally, so make that happen. Fixes: a9ceb78bc75c (cpuidle,menu: use interactivity_req to disable polling) Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-17powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPALStewart Smith
Long ago, only in the lab, there was OPALv1 and OPALv2. Now there is just OPALv3, with nobody ever expecting anything on pre-OPALv3 to be cared about or supported by mainline kernels. So, let's remove FW_FEATURE_OPALv3 and instead use FW_FEATURE_OPAL exclusively. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14drivers/cpuidle: make cpuidle-exynos.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: cpuidle/Kconfig.arm:config ARM_EXYNOS_CPUIDLE cpuidle/Kconfig.arm: bool "Cpu Idle Driver for the Exynos processors" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-14drivers/cpuidle: make cpuidle-ux500.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: cpuidle/Kconfig.arm:config ARM_U8500_CPUIDLE cpuidle/Kconfig.arm: bool "Cpu Idle Driver for the ST-E u8500 processors" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-14drivers/cpuidle: make cpuidle-clps711x.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/cpuidle/Kconfig.arm:config ARM_CLPS711X_CPUIDLE drivers/cpuidle/Kconfig.arm: bool "CPU Idle Driver for CLPS711X processors" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-17cpuidle,menu: smooth out measured_us calculationRik van Riel
The cpuidle state tables contain the maximum exit latency for each cpuidle state. On x86, that is the exit latency for when the entire package goes into that same idle state. However, a lot of the time we only go into the core idle state, not the package idle state. This means we see a much smaller exit latency. We have no way to detect whether we went into the core or package idle state while idle, and that is ok. However, the current menu_update logic does have the potential to trip up the repeating pattern detection in get_typical_interval. If the system is experiencing an exit latency near the idle state's exit latency, some of the samples will have exit_us subtracted, while others will not. This turns a repeating pattern into mush, potentially breaking get_typical_interval. Furthermore, for smaller sleep intervals, we know the chance that all the cores in the package went to the same idle state are fairly small. Dividing the measured_us by two, instead of subtracting the full exit latency when hitting a small measured_us, will reduce the error. Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-17cpuidle,menu: use interactivity_req to disable pollingRik van Riel
The menu governor carefully figures out how much time we typically sleep for an estimated sleep interval, or whether there is a repeating pattern going on, and corrects that estimate for the CPU load. Then it proceeds to ignore that information when determining whether or not to consider polling. This is not a big deal on most x86 CPUs, which have very low C1 latencies, and the patch should not have any effect on those CPUs. However, certain CPUs (eg. Atom) have much higher C1 latencies, and it would be good to not waste performance and power on those CPUs if we are expecting a very low wakeup latency. Disable polling based on the estimated interactivity requirement, not on the time to the next timer interrupt. Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-17cpuidle,x86: increase forced cut-off for polling to 20usRik van Riel
The cpuidle menu governor has a forced cut-off for polling at 5us, in order to deal with firmware that gives the OS bad information on cpuidle states, leading to the system spending way too much time in polling. However, at least one x86 CPU family (Atom) has chips that have a 20us break-even point for C1. Forcing the polling cut-off to less than that wastes performance and power. Increase the polling cut-off to 20us. Systems with a lower C1 latency will be found in the states table by the menu governor, which will pick those states as appropriate. Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-23cpuidle: mvebu: disable the bind/unbind attributes and use ↵Russell King
builtin_platform_driver As the driver doesn't support unbinding, nor does it support arbitary binding of devices, disable the bind/unbind attributes for this driver. Also, as the driver has no remove function, it can never be modular, so use builtin_platform_driver() to avoid the module exit boilerplate. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-23cpuidle: mvebu: clean up multiple platform driversRussell King
There's no need to use multiple platform drivers, especially when we want to do something different in the probe, but we still use a common probe function. We can use the platform ID system to only register one platform driver, but have it match several devices, and give us the CPU idle driver via the ID's driver_data. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-12Merge tag 'pm+acpi-4.3-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previous PM+ACPI pull request (cpufreq core and drivers, cpuidle, generic power domains framework). Some of them didn't make to that pull request and some fix issues introduced by it. The only really new thing is the support for suspend frequency in the cpufreq-dt driver, but it is needed to fix an issue with Exynos platforms. Specifics: - build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck). - generic power domains framework fixes (power on error code path, subdomain removal) and cleanup of a deprecated API user (Geert Uytterhoeven, Jon Hunter, Ulf Hansson). - cpufreq-dt driver fixes including two fixes for bugs related to the new Operating Performance Points Device Tree bindings introduced recently (Viresh Kumar). - suspend frequency support for the cpufreq-dt driver (Bartlomiej Zolnierkiewicz, Viresh Kumar). - cpufreq core cleanups (Viresh Kumar). - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi). - additional sanity check in the cpuidle core (Xunlei Pang). - fix for a comment related to CPU power management (Lina Iyer)" * tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: fix PCT_TO_HWP macro intel_pstate: Fix user input of min/max to legal policy region PM / OPP: Return suspend_opp only if it is enabled cpufreq-dt: add suspend frequency support cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency PM / OPP: add dev_pm_opp_get_suspend_opp() helper staging: board: Migrate away from __pm_genpd_name_add_device() cpufreq: Use __func__ to print function's name cpufreq: staticize cpufreq_cpu_get_raw() PM / Domains: Ensure subdomain is not in use before removing cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL cpuidle/coupled: Add sanity check for safe_state_index PM / Domains: Try power off masters in error path of __pm_genpd_poweron() cpufreq: dt: Tolerance applies on both sides of target voltage cpufreq: dt: Print error on failing to mark OPPs as shared cpufreq: dt: Check OPP count before marking them shared kernel/cpu_pm: fix cpu_cluster_pm_exit comment
2015-09-11Merge branches 'pm-cpu', 'pm-cpuidle' and 'pm-domains'Rafael J. Wysocki
* pm-cpu: kernel/cpu_pm: fix cpu_cluster_pm_exit comment * pm-cpuidle: cpuidle/coupled: Add sanity check for safe_state_index * pm-domains: staging: board: Migrate away from __pm_genpd_name_add_device() PM / Domains: Ensure subdomain is not in use before removing PM / Domains: Try power off masters in error path of __pm_genpd_poweron()
2015-09-03Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM development updates from Russell King: "Included in this update: - moving PSCI code from ARM64/ARM to drivers/ - removal of some architecture internals from global kernel view - addition of software based "privileged no access" support using the old domains register to turn off the ability for kernel loads/stores to access userspace. Only the proper accessors will be usable. - addition of early fixup support for early console - re-addition (and reimplementation) of OMAP special interconnect barrier - removal of finish_arch_switch() - only expose cpuX/online in sysfs if hotpluggable - a number of code cleanups" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits) ARM: software-based priviledged-no-access support ARM: entry: provide uaccess assembly macro hooks ARM: entry: get rid of multiple macro definitions ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die() ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore() ARM: mm: improve do_ldrd_abort macro ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit() ARM: entry: efficiency cleanups ARM: entry: get rid of asm_trace_hardirqs_on_cond ARM: uaccess: simplify user access assembly ARM: domains: remove DOMAIN_TABLE ARM: domains: keep vectors in separate domain ARM: domains: get rid of manager mode for user domain ARM: domains: move initial domain setting value to asm/domains.h ARM: domains: provide domain_mask() ARM: domains: switch to keeping domain value in register ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD() ARM: 8416/1: Feroceon: use of_iomap() to map register base ARM: 8415/1: early fixmap support for earlycon ...
2015-09-03cpuidle/coupled: Add sanity check for safe_state_indexXunlei Pang
Since we are using cpuidle_driver::safe_state_index directly as the target state index, it is better to add the sanity check at the point of registering the driver. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-02Merge tag 'pm+acpi-4.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "From the number of commits perspective, the biggest items are ACPICA and cpufreq changes with the latter taking the lead (over 50 commits). On the cpufreq front, there are many cleanups and minor fixes in the core and governors, driver updates etc. We also have a new cpufreq driver for Mediatek MT8173 chips. ACPICA mostly updates its debug infrastructure and adds a number of fixes and cleanups for a good measure. The Operating Performance Points (OPP) framework is updated with new DT bindings and support for them among other things. We have a few updates of the generic power domains framework and a reorganization of the ACPI device enumeration code and bus type operations. And a lot of fixes and cleanups all over. Included is one branch from the MFD tree as it contains some PM-related driver core and ACPI PM changes a few other commits are based on. Specifics: - ACPICA update to upstream revision 20150818 including method tracing extensions to allow more in-depth AML debugging in the kernel and a number of assorted fixes and cleanups (Bob Moore, Lv Zheng, Markus Elfring). - ACPI sysfs code updates and a documentation update related to AML method tracing (Lv Zheng). - ACPI EC driver fix related to serialized evaluations of _Qxx methods and ACPI tools updates allowing the EC userspace tool to be built from the kernel source (Lv Zheng). - ACPI processor driver updates preparing it for future introduction of CPPC support and ACPI PCC mailbox driver updates (Ashwin Chaugule). - ACPI interrupts enumeration fix for a regression related to the handling of IRQ attribute conflicts between MADT and the ACPI namespace (Jiang Liu). - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar). - ACPI device registration code reorganization to separate the sysfs-related code and bus type operations from the rest (Rafael J Wysocki). - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause, Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss). - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan Xinhui, Rafael J Wysocki). - cpufreq core cleanups on top of the previous changes allowing it to preseve its sysfs directories over system suspend/resume (Viresh Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior). - cpufreq fixes and cleanups related to governors (Viresh Kumar). - cpufreq updates (core and the cpufreq-dt driver) related to the turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz). - New DT bindings for Operating Performance Points (OPP), support for them in the OPP framework and in the cpufreq-dt driver plus related OPP framework fixes and cleanups (Viresh Kumar). - cpufreq powernv driver updates (Shilpasri G Bhat). - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen). - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean). - intel_pstate driver updates including Skylake-S support, support for enabling HW P-states per CPU and an additional vendor bypass list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao). - cpuidle core fixes related to the handling of coupled idle states (Xunlei Pang). - intel_idle driver updates including Skylake Client support and support for freeze-mode-specific idle states (Len Brown). - Driver core updates related to power management (Andy Shevchenko, Rafael J Wysocki). - Generic power domains framework fixes and cleanups (Jon Hunter, Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson). - Device PM QoS framework update to allow the latency tolerance setting to be exposed to user space via sysfs (Mika Westerberg). - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas). - System sleep support updates (Alan Stern, Len Brown, SungEun Kim). - rockchip-io AVS support updates (Heiko Stuebner). - PM core clocks support fixup (Colin Ian King). - Power capping RAPL driver update including support for Skylake H/S and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi). - Generic device properties framework fixes related to the handling of static (driver-provided) property sets (Andy Shevchenko). - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat, Shreyas B Prabhu)" * tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output powercap / RAPL: disable the 2nd power limit properly tools: cpupower: Fix error when running cpupower monitor PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) ...
2015-09-01Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The biggest change in this cycle is the rewrite of the main SMP load balancing metric: the CPU load/utilization. The main goal was to make the metric more precise and more representative - see the changelog of this commit for the gory details: 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking") It is done in a way that significantly reduces complexity of the code: 5 files changed, 249 insertions(+), 494 deletions(-) and the performance testing results are encouraging. Nevertheless we need to keep an eye on potential regressions, since this potentially affects every SMP workload in existence. This work comes from Yuyang Du. Other changes: - SCHED_DL updates. (Andrea Parri) - Simplify architecture callbacks by removing finish_arch_switch(). (Peter Zijlstra et al) - cputime accounting: guarantee stime + utime == rtime. (Peter Zijlstra) - optimize idle CPU wakeups some more - inspired by Facebook server loads. (Mike Galbraith) - stop_machine fixes and updates. (Oleg Nesterov) - Introduce the 'trace_sched_waking' tracepoint. (Peter Zijlstra) - sched/numa tweaks. (Srikar Dronamraju) - misc fixes and small cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) sched/deadline: Fix comment in enqueue_task_dl() sched/deadline: Fix comment in push_dl_tasks() sched: Change the sched_class::set_cpus_allowed() calling context sched: Make sched_class::set_cpus_allowed() unconditional sched: Fix a race between __kthread_bind() and sched_setaffinity() sched: Ensure a task has a non-normalized vruntime when returning back to CFS sched/numa: Fix NUMA_DIRECT topology identification tile: Reorganize _switch_to() sched, sparc32: Update scheduler comments in copy_thread() sched: Remove finish_arch_switch() sched, tile: Remove finish_arch_switch sched, sh: Fold finish_arch_switch() into switch_to() sched, score: Remove finish_arch_switch() sched, avr32: Remove finish_arch_switch() sched, MIPS: Get rid of finish_arch_switch() sched, arm: Remove finish_arch_switch() sched/fair: Clean up load average references sched/fair: Provide runnable_load_avg back to cfs_rq sched/fair: Remove task and group entity load when they are dead sched/fair: Init cfs_rq's sched_entity load average ...
2015-08-28cpuidle/coupled: Remove redundant 'dev' argument of cpuidle_state_is_coupled()Xunlei Pang
For cpuidle_state_is_coupled(), 'dev' is not used, so remove it. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-28cpuidle/coupled: Remove cpuidle_device::safe_state_indexXunlei Pang
cpuidle_device::safe_state_index need to be initialized before use, it should be the same as cpuidle_driver::safe_state_index. We tackled this issue by removing the safe_state_index from the cpuidle_device structure and use the one in the cpuidle_driver structure instead. Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-03ARM: migrate to common PSCI client codeMark Rutland
Now that the common PSCI client code has been factored out to drivers/firmware, and made safe for 32-bit use, move the 32-bit ARM code over to it. This results in a moderate reduction of duplicated lines, and will prevent further duplication as the PSCI client code is updated for PSCI 1.0 and beyond. The two legacy platform users of the PSCI invocation code are updated to account for interface changes. In both cases the power state parameter (which is constant) is now generated using macros, so that the pack/unpack logic can be killed in preparation for PSCI 1.0 power state changes. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-21sched/idle: Move latency tracing stop/start calls deeper inside the idle loopLucas Stach
Make sure to stop tracing only once we are past a point where all latency tracing events have been processed (irqs are not enabled again). This has the slight advantage of capturing more latency related events in the idle path, but most importantly it makes sure that latency tracing doesn't get re-enabled inadvertently when new events are coming in. This makes the irqsoff latency tracer useful again, as we stop capturing CPU sleep time as IRQ latency. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel@pengutronix.de Cc: patchwork-lst@pengutronix.de Link: http://lkml.kernel.org/r/1437410090-3747-1-git-send-email-l.stach@pengutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-09suspend-to-idle: Prevent RCU from complaining about tick_freeze()Rafael J. Wysocki
Put tick_freeze() under RCU_NONIDLE() to prevent RCU from complaining about suspicious RCU usage in idle by trace_suspend_resume() called from there. While at it, fix a comment related to another usage of RCU_NONIDLE() in enter_freeze_proper(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-02Merge tag 'module-builtin_driver-v4.1-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull module_platform_driver replacement from Paul Gortmaker: "Replace module_platform_driver with builtin_platform driver in non modules. We see an increasing number of non-modular drivers using modular_driver() type register functions. There are several downsides to letting this continue unchecked: - The code can appear modular to a reader of the code, and they won't know if the code really is modular without checking the Makefile and Kconfig to see if compilation is governed by a bool or tristate. - Coders of drivers may be tempted to code up an __exit function that is never used, just in order to satisfy the required three args of the modular registration function. - Non-modular code ends up including the <module.h> which increases CPP overhead that they don't need. - It hinders us from performing better separation of the module init code and the generic init code. So here we introduce similar macros for builtin drivers. Then we convert builtin drivers (controlled by a bool Kconfig) by making the following type of mapping: module_platform_driver() ---> builtin_platform_driver() module_platform_driver_probe() ---> builtin_platform_driver_probe(). The set of drivers that are converted here are just the ones that showed up as relying on an implicit include of <module.h> during a pending header cleanup. So we convert them here vs adding an include of <module.h> to non-modular code to avoid compile fails. Additonal conversions can be done asynchronously at any time. Once again, an unused module_exit function that is removed here appears in the diffstat as an outlier wrt all the other changes" * tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver drivers/power: Convert non-modular syscon-reboot to use builtin_platform_driver drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver drivers/cpufreq: Convert non-modular s5pv210-cpufreq.c to use builtin_platform_driver drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver drivers/platform: Convert non-modular pdev_bus to use builtin_platform_driver platform_device: better support builtin boilerplate avoidance
2015-07-01Merge tag 'pm+acpi-4.2-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes that didn't make it to the previous PM+ACPI pull request or are fixing issues introduced by it. Specifics: - Fix a recently added memory leak in an error path in the ACPI resources management code (Dan Carpenter) - Fix a build warning triggered by an ACPI video header function that should be static inline (Borislav Petkov) - Change names of helper function converting struct fwnode_handle pointers to either struct device_node or struct acpi_device pointers so they don't conflict with local variable names (Alexander Sverdlin) - Make the hibernate core re-enable nonboot CPUs on failures to disable them as expected (Vitaly Kuznetsov) - Increase the default timeout of the device suspend watchdog to prevent it from triggering too early on some systems (Takashi Iwai) - Prevent the cpuidle powernv driver from registering idle states with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT is unset which leads to boot hangs (Preeti U Murthy)" * tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() ACPI / video: Inline acpi_video_set_dmi_backlight_type ACPI / resources: free memory on error in add_region_before()
2015-06-26Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...
2015-06-26Merge branches 'acpi-video', 'device-properties', 'pm-sleep' and 'pm-cpuidle'Rafael J. Wysocki
* acpi-video: ACPI / video: Inline acpi_video_set_dmi_backlight_type * device-properties: ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() * pm-sleep: PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure * pm-cpuidle: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
2015-06-26tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP ↵preeti
set in periodic mode On some archs, the local clockevent device stops in deep cpuidle states. The broadcast framework is used to wakeup cpus in these idle states, in which either an external clockevent device is used to send wakeup ipis or the hrtimer broadcast framework kicks in in the absence of such a device. One cpu is nominated as the broadcast cpu and this cpu sends wakeup ipis to sleeping cpus at the appropriate time. This is the implementation in the oneshot mode of broadcast. In periodic mode of broadcast however, the presence of such cpuidle states results in the cpuidle driver calling tick_broadcast_enable() which shuts down the local clockevent devices of all the cpus and appoints the tick broadcast device as the clockevent device for each of them. This works on those archs where the tick broadcast device is a real clockevent device. But on archs which depend on the hrtimer mode of broadcast, the tick broadcast device hapens to be a pseudo device. The consequence is that the local clockevent devices of all cpus are shutdown and the kernel hangs at boot time in periodic mode. Let us thus not register the cpuidle states which have CPUIDLE_FLAG_TIMER_STOP flag set, on archs which depend on the hrtimer mode of broadcast in periodic mode. This patch takes care of doing this on powerpc. The cpus would not have entered into such deep cpuidle states in periodic mode on powerpc anyway. So there is no loss here. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: 3.19+ <stable@vger.kernel.org> # 3.19+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-22Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
2015-06-22cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle stateShilpasri G Bhat
The idle cpus which stay in snooze for a long period can degrade the perfomance of the sibling cpus. If the cpu stays in snooze for more than target residency of the next available idle state, then exit from snooze. This gives a chance to the cpuidle governor to re-evaluate the last idle state of the cpu to promote it to deeper idle states. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18Merge branches 'pm-sleep' and 'pm-runtime'Rafael J. Wysocki
* pm-sleep: PM / sleep: trace_device_pm_callback coverage in dpm_prepare/complete PM / wakeup: add a dummy wakeup_source to record statistics PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection PM / tick: Add tracepoints for suspend-to-idle diagnostics PM / sleep: Fix symbol name in a comment in kernel/power/main.c leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS bus: omap_l3_noc: add missed callbacks for suspend-to-disk PM / sleep: Add macro to define common noirq system PM callbacks PM / sleep: Refine diagnostic messages in enter_state() PM / wakeup: validate wakeup source before activating it. * pm-runtime: PM / Runtime: Update last_busy in rpm_resume PM / runtime: add note about re-calling in during device probe()
2015-06-16drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driverPaul Gortmaker
All these drivers are configured with Kconfig options that are declared as bool. Hence it is not possible for the code to be built as modular. However the code is currently using the module_platform_driver() macro for driver registration. While this currently works, we really don't want to be including the module.h header in non-modular code, which we'll be forced to do, pending some upcoming code relocation from init.h into module.h. So we fix it now by using the non-modular equivalent. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-05-30cpuidle: Do not use CPUIDLE_DRIVER_STATE_START in cpuidle.cRafael J. Wysocki
The CPUIDLE_DRIVER_STATE_START symbol is defined as 1 only if CONFIG_ARCH_HAS_CPU_RELAX is set, otherwise it is defined as 0. However, if CONFIG_ARCH_HAS_CPU_RELAX is set, the first (index 0) entry in the cpuidle driver's table of states is overwritten with the default "poll" entry by the core. The "state" defined by the "poll" entry doesn't provide ->enter_dead and ->enter_freeze callbacks and its exit_latency is 0. For this reason, it is not necessary to use CPUIDLE_DRIVER_STATE_START in cpuidle_play_dead() (->enter_dead is NULL, so the "poll state" will be skipped by the loop). It also is arguably unuseful to return states with exit_latency equal to 0 from find_deepest_state(), so the function can be modified to start the loop from index 0 and the "poll state" will be skipped by it as a result of the check against latency_req. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
2015-05-19PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPENDRafael J. Wysocki
Since idle_should_freeze() is defined to always return 'false' for CONFIG_SUSPEND unset, all of the code depending on it in cpuidle_idle_call() is not necessary in that case. Make that code depend on CONFIG_SUSPEND too to avoid building it when it is not going to be used. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-14cpuidle: Select a different state on tick_broadcast_enter() failuresRafael J. Wysocki
If tick_broadcast_enter() fails in cpuidle_enter_state(), try to find another idle state to enter instead of invoking default_idle_call() immediately and returning -EBUSY which should increase the chances of saving some energy in those cases. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Kevin Hilman <khilman@linaro.org>
2015-05-14sched / idle: Call default_idle_call() from cpuidle_enter_state()Rafael J. Wysocki
The check of the cpuidle_enter() return value against -EBUSY made in call_cpuidle() will not be necessary any more if cpuidle_enter_state() calls default_idle_call() directly when it is about to return -EBUSY, so make that happen and eliminate the check. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Kevin Hilman <khilman@linaro.org>
2015-05-14sched / idle: Call idle_set_state() from cpuidle_enter_state()Rafael J. Wysocki
Introduce a wrapper function around idle_set_state() called sched_idle_set_state() that will pass this_rq() to it as the first argument and make cpuidle_enter_state() call the new function before and after entering the target state. At the same time, remove direct invocations of idle_set_state() from call_cpuidle(). This will allow the invocation of default_idle_call() to be moved from call_cpuidle() to cpuidle_enter_state() safely and call_cpuidle() to be simplified a bit as a result. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Kevin Hilman <khilman@linaro.org>
2015-05-09cpuidle: Fix the kerneldoc comment for cpuidle_enter_state()Rafael J. Wysocki
The kerneldoc comment for cpuidle_enter_state() doesn't match the function's header any more, so fix it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-06ARM: MCPM: remove residency argument from mcpm_cpu_suspend()Nicolas Pitre
This is currently unused. If a suspend must be limited to CPU level only by preventing the last man from triggering a cluster level suspend then this should be determined according to many other criteria the MCPM layer is currently not aware of. It is unlikely that mcpm_cpu_suspend() would be the proper conduit for that information anyway. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-05-04cpuidle: Check the sign of index in cpuidle_reflect()Rafael J. Wysocki
Avoid calling the governor's ->reflect method if the state index passed to cpuidle_reflect() is negative. This allows the analogous check to be dropped from menu_reflect(), so do that too, and ensures that arbitrary error codes can be passed to cpuidle_reflect() as the index with no adverse consequences. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-04-29cpuidle: Run tick_broadcast_exit() with disabled interruptsRafael J. Wysocki
Commit 335f49196fd6 (sched/idle: Use explicit broadcast oneshot control function) replaced clockevents_notify() invocations in cpuidle_idle_call() with direct calls to tick_broadcast_enter() and tick_broadcast_exit(), but it overlooked the fact that interrupts were already enabled before calling the latter which led to functional breakage on systems using idle states with the CPUIDLE_FLAG_TIMER_STOP flag set. Fix that by moving the invocations of tick_broadcast_enter() and tick_broadcast_exit() down into cpuidle_enter_state() where interrupts are still disabled when tick_broadcast_exit() is called. Also ensure that interrupts will be disabled before running tick_broadcast_exit() even if they have been enabled by the idle state's ->enter callback. Trigger a WARN_ON_ONCE() in that case, as we generally don't want that to happen for states with CPUIDLE_FLAG_TIMER_STOP set. Fixes: 335f49196fd6 (sched/idle: Use explicit broadcast oneshot control function) Reported-and-tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>