summaryrefslogtreecommitdiff
path: root/drivers/crypto
AgeCommit message (Collapse)Author
2008-07-13crypto: ixp4xx - Select CRYPTO_AUTHENCImre Kaloz
Without CRYPTO_AUTHENC the driver fails to build: drivers/built-in.o: In function `ixp_module_init': ixp4xx_crypto.c:(.init.text+0x3250): undefined reference to `crypto_aead_type' Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for sha256 and md5 variantsLee Nipper
This patch adds support for: authenc(hmac(sha256),cbc(aes)), authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(md5),cbc(aes)), authenc(hmac(md5),cbc(des3_ede)). Some constant usage was changed to use aes, des, and sha include files. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Use proper form for algorithm driver namesHerbert Xu
The name authenc(hmac(sha1-talitos),cbc(aes-talitos)) is potentially ambiguous since it could also mean using the generic authenc template on hmac(sha1-talitos) and cbc(aes-talitos). In general, parentheses should be reserved for templates that spawn algorithms. This patches changes it to the form authenc-hmac-sha1-cbc-aes-talitos. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for 3desLee Nipper
This patch adds support for authenc(hmac(sha1),cbc(des3_ede)) to the talitos crypto driver for the Freescale Security Engine. Some adjustments were made to the scatterlist to link table conversion to make 3des work for ping -s 1439..1446. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: padlock - Make module loading quieter when hardware isn't availableJeremy Katz
When loading aes or sha256 via the module aliases, the padlock modules also try to get loaded. Make the error message for them not being present only be a NOTICE rather than an ERROR so that use of 'quiet' will suppress the messages Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: ixp4xx - Hardware crypto support for IXP4xx CPUsChristian Hohnstaedt
Add support for the hardware crypto engine provided by the NPE C of the Intel IXP4xx networking processor series. Supported ciphers: des, des3, aes and a combination of them with md5 and sha1 hmac Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Freescale integrated security engine (SEC) driverKim Phillips
Add support for the SEC available on a wide range of PowerQUICC devices, e.g. MPC8349E, MPC8548E. This initial version supports authenc(hmac(sha1),cbc(aes)) for use with IPsec. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] hifn: Simplify code using ARRAY_SIZE() macroRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] hifn: Remove duplicated includeHuang Weiyi
Removed duplicated include file <linux/interrupt.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Have HW invalidate src and dest descriptors after processingPatrick McHardy
The descriptors need to be invalidated after processing for ring cleanup to work properly and to avoid using an old destination descriptor when the src and cmd descriptors are already set up and the dst descriptor isn't. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Move command descriptor setup to seperate functionPatrick McHardy
Move command descriptor setup to seperate function as preparation for the following DMA setup fixes. Note 1: also fix a harmless typo while moving it: sa_idx is initialized to dma->resi instead of dma->cmdi. Note 2: errors from command descriptor setup are not propagated back, anymore, they can't be handled anyway and all conditions leading to errors should be checked earlier. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Fix max queue length valuePatrick McHardy
All but the last element of the command and result descriptor rings can be used for crypto requests, fix HIFN_QUEUE_LENGTH. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Properly initialize ivsize for CBC modesPatrick McHardy
For combined modes like cbc(aes) the driver is responsible for initializing ivsize. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Use unique driver names for different algosPatrick McHardy
When the CryptoAPI instantiates a new algorithm, it performs a lookup by driver name. Since hifn uses the same name for all modes of one algorithm, the lookup may return an incorrect algorithm. Change the name to use <mode>-<algo>-<devicename> to provide unique names for the different combinations and devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Properly handle requests for less than the full scatterlistPatrick McHardy
The scatterlist may contain more data than the crypto request, causing an underflow of the remaining byte count while walking the list. Use the minimum of the scatterlist element size and the remaining byte count specified in the crypto request to avoid this. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Fix data alignment checksPatrick McHardy
The check for misalignment of the scatterlist data has two bugs: - the source buffer doesn't need to be aligned at all - the destination buffer and its size needs to be aligned to a multiple of 4, not to the crypto alg blocksize Introduce symbolic constant for destination buffer alignment requirements, use it instead of the crypto alg blocksize and remove the unnecessary checks for source buffer alignment and change cra_alignmask to zero. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Handle ablkcipher_walk errorsPatrick McHardy
ablkcipher_walk may return a negative error value, handle this properly instead of treating it as a huge number of scatter-gather elements. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Indicate asynchronous processing to crypto APIPatrick McHardy
hifn_setup_crypto() needs to return -EINPROGRESS on success to indicate asynchronous processing to the crypto API. This also means it must not return the errno code returned by hifn_process_queue(), if any. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Remove printk_ratelimit() for debugging printkPatrick McHardy
Without debugging this spams the log with "printk: N messages surpressed" without any actual messages on error. With debugging its more useful to always see the message. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Endianess fixesPatrick McHardy
HIFN uses little-endian by default, move cpu_to_le32 conversion to hifn_write_0/ hifn_write_1, add sparse annotations and fix an invalid endian conversion in hifn_setup_src_desc. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] padlock-aes: Use generic setkey functionSebastian Siewior
The Padlock AES setkey routine is the same as exported by the generic implementation. So we could use it. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Cc: Michal Ludvig <michal@logix.cz> Tested-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] sha384: Hardware acceleration for s390Jan Glauber
Exploit the System z10 hardware acceleration for SHA384. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] sha512: Hardware acceleration for s390Jan Glauber
Exploit the System z10 hardware acceleration for SHA512. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-17[S390] zcrypt: add support for large random numbersRalph Wuerthner
This patch allows user space applications to access large amounts of truly random data. The random data source is the build-in hardware random number generator on the CEX2C cards. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-03-30drivers/crypto/hifn_795x.c trivial endianness annotationsAl Viro
NB: remaining endianness warnings in the file are, AFAICS, real bugs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-15[HIFN]: Fix invalid config ifdefs for RNG supportPatrick McHardy
The CRYPTO_DEV_HIFN_795X_RNG ifdefs are missing the CONFIG_ prefix. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-26[S390] crypto: move s390 Kconfig options.Jan Glauber
Move s390 crypto Kconfig options to drivers/crypto/Kconfig to have all hardware crypto devices in one place. This also makes messing up the kernel source tree easier for some people. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-25[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is mHerbert Xu
Currently it is possible to select HW_RANDOM as a module and have hifn795x built-in. This causes a build problem because hifn795x will then call hwrng_register which isn't built-in. This patch introduces a new config option to control the hifn795x RNG which lets us avoid this problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...
2008-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix alignment fault in aes_crypt_copy
2008-01-10[CRYPTO] hifn_795x: Fixup container_of() usageAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] padlock: Only reset the key once for each CBC and ECB operationHerbert Xu
Currently we reset the key for each segment fed to the xcrypt instructions. This patch optimises this for CBC and ECB so that we only do this once for each encrypt/decrypt operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] blkcipher: Merge ablkcipher and blkcipher into one option/moduleHerbert Xu
With the impending addition of the givcipher type, both blkcipher and ablkcipher algorithms will use it to create givcipher objects. As such it no longer makes sense to split the system between ablkcipher and blkcipher. In particular, both ablkcipher.c and blkcipher.c would need to use the givcipher type which has to reside in ablkcipher.c since it shares much code with it. This patch merges the two Kconfig options as well as the modules into one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: Add __dev{init,exit} annotationsAdrian Bunk
This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: Use correct encrypt/decrypt function in fallbackSebastian Siewior
crypto_blkcipher_decrypt is wrong because it does not care about the IV. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: do not copy the IV too oftenSebastian Siewior
There is no reason to keep the IV in the private structre. Instead keep just a pointer to make the patch smaller :) This also remove a few memcpy()s Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[HIFN]: Add support for using the random number generatorPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[HIFN]: Improve PLL initializationPatrick McHardy
The current PLL initalization has a number of deficiencies: - uses fixed multiplier of 8, which overclocks the chip when using a reference clock that operates at frequencies above 33MHz. According to a comment in the BSD source, this is true for the external clock on almost all every board. - writes to a reserved bit - doesn't follow the initialization procedure specified in chapter 6.11.1 of the HIFN hardware users guide - doesn't allow to use the PCI clock This patch adds a module parameter to specify the reference clock (pci or external) and its frequency and uses that to calculate the optimum multiplier to reach the maximal speed. By default it uses the external clock and assumes a speed of 66MHz, which effectively halfs the frequency currently used. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] ablkcipher: Add distinct ABLKCIPHER typeHerbert Xu
Up until now we have ablkcipher algorithms have been identified as type BLKCIPHER with the ASYNC bit set. This is suboptimal because ablkcipher refers to two things. On the one hand it refers to the top-level ablkcipher interface with requests. On the other hand it refers to and algorithm type underneath. As it is you cannot request a synchronous block cipher algorithm with the ablkcipher interface on top. This is a problem because we want to be able to eventually phase out the blkcipher top-level interface. This patch fixes this by making ABLKCIPHER its own type, just as we have distinct types for HASH and DIGEST. The type it associated with the algorithm implementation only. Which top-level interface is used for synchronous block ciphers is then determined by the mask that's used. If it's a specific mask then the old blkcipher interface is given, otherwise we go with the new ablkcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] hifn: Add missing includesAndrew Morton
alpha: drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_init': drivers/crypto/hifn_795x.c:1231: error: implicit declaration of function 'sg_init_table' drivers/crypto/hifn_795x.c:1243: error: implicit declaration of function 'sg_set_page' drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_exit': drivers/crypto/hifn_795x.c:1257: error: implicit declaration of function 'sg_page' drivers/crypto/hifn_795x.c:1257: warning: passing argument 1 of '__free_pages' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_add': drivers/crypto/hifn_795x.c:1278: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk': drivers/crypto/hifn_795x.c:1336: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'hifn_setup_session': drivers/crypto/hifn_795x.c:1465: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c:1469: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c:1472: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_get': drivers/crypto/hifn_795x.c:1593: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast {standard input}: Assembler messages: {standard input}:7: Warning: setting incorrect section attributes for .got drivers/crypto/hifn_795x.c: In function 'hifn_process_ready': drivers/crypto/hifn_795x.c:1653: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'hifn_probe': drivers/crypto/hifn_795x.c:2438: error: 'DMA_32BIT_MASK' undeclared (first use in this function) drivers/crypto/hifn_795x.c:2438: error: (Each undeclared identifier is reported only once drivers/crypto/hifn_795x.c:2438: error: for each function it appears in.) drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int' drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] hifn: Make Kconfig option depend on PCIJan Glauber
The HIFN driver is currently selectable on s390 but wont compile. Since it looks like HIFN needs PCI make the Kconfig dependent on PCI, which is not available on s390. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] hifn: Schedule callback invocation to tasklet.Evgeniy Polyakov
This patch forces HIFN driver to invoke crypto request callbacks from tasklet (softirq context) instead of hardirq context, since network stack expects it to be called from bottom halves. It is done by simply scheduling callback invocation via dedicated tasklet. Workqueue solution was dropped because of tooo slow rescheduling performance (7 times slower than tasklet, for mode details one can check this link: http://tservice.net.ru/~s0mbre/blog/devel/other/2007_11_09.html). Driver passed all AES and DES tests in tcryt.c module. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: Add fallback for unsupported modesSebastian Siewior
The Geode AES crypto engine supports only 128 bit long key. This patch adds fallback for other key sizes which are required by the AES standard. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: move defines into a headerfileSebastian Siewior
This patch moves macros in geode-aes.c into geode-aes.h. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: relax in busy loop and care about return valueSebastian Siewior
The code waits in a busy loop until the hardware finishes the encryption or decryption process. This wants a cpu_relax() :) The busy loop finishes either if the encryption is done or if the counter is zero. If the latter is true than the hardware failed. Since this should not happen, leave sith a BUG(). Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: use consistent IV copySebastian Siewior
It is enough if the IV is copied before and after the while loop. With DM-Crypt is seems not be required to save the IV after encrytion because a new one is used in the request (dunno about other users). It is not save to load the IV within while loop and not save afterwards because we mill end up with the wrong IV if the request goes consists of more than one page. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] aes: Move common defines into a header fileSebastian Siewior
This three defines are used in all AES related hardware. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] geode: remove aliasSebastian Siewior
alias isn't required because the module provides PCI ids. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] hifn_795x: Detect weak keysEvgeniy Polyakov
HIFN driver update to use DES weak key checks (exported in this patch). Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-10[CRYPTO] hifn_795x: HIFN 795x driverEvgeniy Polyakov
This is a driver for HIFN 795x crypto accelerator chips. It passed all tests for AES, DES and DES3_EDE except weak test for DES, since hardware can not determine weak keys. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>