summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2012-08-13dma: tegra: enable/disable dma clockLaxman Dewangan
Enable the DMA clock when allocating channel and disable clock when freeing channels. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-06Merge branch 'fixes_for-3.6' into fixesVinod Koul
2012-08-02Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits) sh: explicitly include sh_dma.h in setup-sh7722.c sh: ecovec: care CN5 VBUS if USB host mode sh: sh7724: fixup renesas_usbhs clock settings sh: intc: initial irqdomain support. sh: pfc: Fix up init ordering mess. serial: sh-sci: fix compilation breakage, when DMA is enabled dmaengine: shdma: restore partial transfer calculation sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757 sh: Fix up recursive fault in oops with unset TTB. sh: pfc: Build fix for pinctrl_remove_gpio_range() changes. sh: select the fixed regulator driver on several boards sh: ecovec: switch MMC power control to regulators sh: add fixed voltage regulators to se7724 sh: add fixed voltage regulators to sdk7786 sh: add fixed voltage regulators to rsk sh: add fixed voltage regulators to migor sh: add fixed voltage regulators to kfr2r09 sh: add fixed voltage regulators to ap325rxa sh: add fixed voltage regulators to sh7757lcr sh: add fixed voltage regulators to sh2007 ...
2012-08-01Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
2012-08-01dmaengine: shdma: restore partial transfer calculationGuennadi Liakhovetski
The recent shdma driver split has mistakenly removed support for partial DMA transfer size calculation on forced termination. This patch restores it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-31Merge branches 'dma-omap', 'dma-pl08x' and 'dma-sa11x0' into dmaengineRussell King
2012-07-31dmaengine: omap: add support for cyclic DMARussell King
Add support for cyclic DMA to the OMAP DMA engine driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31dmaengine: omap: add support for setting fiRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31dmaengine: omap: add support for returning residue in tx_state methodRussell King
Add support for returning the residue for a particular descriptor by reading the current DMA address for the source or destination side of the transfer as appropriate, and walking the scatterlist until we find an entry containing the current DMA address. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31dmaengine: add OMAP DMA engine driverRussell King
Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-27dma: imx-dma: Fix kernel crash due to missing clock conversionFabio Estevam
With the new i.MX clock infrastructure we need to request the dma clocks seperately: ahb and ipg clocks. This fixes the following kernel crash and make audio to be functional again: root@freescale /home$ aplay audio48k16S.wav Playing WAVE 'audio48k16S.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c7b74000 [00000000] *pgd=a7bb5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.5.0-rc5-next-20120702-00007-g3028b64 #1128) PC is at snd_dmaengine_pcm_get_chan+0x8/0x10 LR is at snd_imx_pcm_hw_params+0x18/0xdc pc : [<c02d3cf8>] lr : [<c02e95ec>] psr: a0000013 sp : c7b45e30 ip : ffffffff fp : c7ae58e0 r10: 00000000 r9 : c7ae981c r8 : c7b88800 r7 : c7ae5a60 r6 : c7ae5b20 r5 : c7ae9810 r4 : c7afa060 r3 : 00000000 r2 : 00000001 r1 : c7b88800 r0 : c7afa060 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a7b74000 DAC: 00000015 Process aplay (pid: 701, stack limit = 0xc7b44270) Stack: (0xc7b45e30 to 0xc7b46000) 5e20: 00100000 00000029 c7b88800 c02db870 5e40: c7ae5a60 c02d4594 00000010 01ae5a60 c7ae5a60 c7ae9810 c7ae9810 c7afa060 5e60: c7ae5b20 c7ae5a60 c7b88800 c02e3ef0 c02e3e08 c7b1e400 c7afa060 c7b88800 5e80: 00000000 c0014da8 c7b44000 00000000 bec566ac c02cd400 c7afa060 c7afa060 5ea0: bec56800 c7b88800 c0014da8 c02cdd7c c04ee710 c04ee7b8 00000003 c005fc74 5ec0: 00000000 7fffffff c7b45f00 c7afa060 c7b67420 c7ba3070 00000004 c0014da8 5ee0: c7b44000 00000000 bec566ac c02ced88 c04e95f8 b6f5ab04 c7b45fb0 0145a468 5f00: 0145a600 bec566bc bec56800 c7b67420 c7ba3070 c00d499c c7b45f18 c7b45f18 5f20: 0000001a 00000004 00000001 c7b44000 c0527f40 00000009 00000008 00000000 5f40: c7b44000 c002c9ec 00000001 c04f0ab0 c04ebec0 00000101 00000000 0000000a 5f60: 60000093 c7b67420 bec56800 c25c4111 00000004 c0014da8 c7b44000 00000000 5f80: bec566ac c00d4f38 b6ffb658 00000000 c0522d80 0145a468 b6fd5000 0145a418 5fa0: 00000036 c0014c00 0145a468 b6fd5000 00000004 c25c4111 bec56800 00020001 5fc0: 0145a468 b6fd5000 0145a418 00000036 0145a468 0145a600 bec566bc bec566ac 5fe0: 0145a468 bec56388 b6f65ce4 b6dcebec 20000010 00000004 00000000 00000000 [<c02d3cf8>] (snd_dmaengine_pcm_get_chan+0x8/0x10) from [<c02e95ec>] (snd_imx_pcm_hw_params+0x18/0xdc) [<c02e95ec>] (snd_imx_pcm_hw_params+0x18/0xdc) from [<c02e3ef0>] (soc_pcm_hw_params+0xe8/0x1f0) [<c02e3ef0>] (soc_pcm_hw_params+0xe8/0x1f0) from [<c02cd400>] (snd_pcm_hw_params+0x124/0x474) [<c02cd400>] (snd_pcm_hw_params+0x124/0x474) from [<c02cdd7c>] (snd_pcm_common_ioctl1+0x4b4/0xf74) [<c02cdd7c>] (snd_pcm_common_ioctl1+0x4b4/0xf74) from [<c02ced88>] (snd_pcm_playback_ioctl1+0x30/0x510) [<c02ced88>] (snd_pcm_playback_ioctl1+0x30/0x510) from [<c00d499c>] (do_vfs_ioctl+0x80/0x5e4) [<c00d499c>] (do_vfs_ioctl+0x80/0x5e4) from [<c00d4f38>] (sys_ioctl+0x38/0x60) [<c00d4f38>] (sys_ioctl+0x38/0x60) from [<c0014c00>] (ret_fast_syscall+0x0/0x2c) Code: e593000c e12fff1e e59030a0 e59330bc (e5930000) ---[ end trace fa518c8ba3a74e97 ]-- Reported-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: stable@vger.kernel.org
2012-07-25Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This time we have a new dmaengine driver from the tegra folks. Also we have Guennadi's cleanup of sh drivers which incudes a library for sh drivers. And the usual odd fixes in bunch of drivers and some nice cleanup of dw_dmac from Andy." Fix up conflicts in drivers/mmc/host/sh_mmcif.c * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Cleanup logging messages mmc: sh_mmcif: switch to the new DMA channel allocation and configuration dma: sh: provide a migration path for slave drivers to stop using .private dma: sh: use an integer slave ID to improve API compatibility dmaengine: shdma: prepare to stop using struct dma_chan::private sh: remove unused DMA device pointer from SIU platform data ASoC: siu: don't use DMA device for channel filtering dmaengine: shdma: (cosmetic) simplify a static function dmaengine: at_hdmac: add a few const qualifiers dw_dmac: use 'u32' for LLI structure members, not dma_addr_t dw_dmac: mark dwc_dump_lli inline dma: mxs-dma: Export missing symbols from mxs-dma.c dma: shdma: convert to the shdma base library ASoC: fsi: prepare for conversion to the shdma base library usb: renesas_usbhs: prepare for conversion to the shdma base library ASoC: siu: prepare for conversion to the shdma base library serial: sh-sci: prepare for conversion to the shdma base library mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion dma: shdma: prepare for conversion to the shdma base library ...
2012-07-20dmaengine: Cleanup logging messagesJoe Perches
Use a more current logging style. Add pr_fmt to prefix dmaengine: to messages. Convert printk(KERN_ERR to pr_err(. Convert embedded function name use to "%s: ", __func__ Align arguments. Original-patch-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20dma: sh: provide a migration path for slave drivers to stop using .privateGuennadi Liakhovetski
This patch extends the sh dmaengine driver to support the preferred channel selection and configuration method, instead of using the "private" field from struct dma_chan. We add a standard filter function to be used by slave drivers instead of implementing their own ones, and add support for the DMA_SLAVE_CONFIG control operation, which must accompany the new channel selection method. We still support the legacy .private channel allocation method to cater for a smooth driver migration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [applied a trvial checkpath fix] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20dma: sh: use an integer slave ID to improve API compatibilityGuennadi Liakhovetski
Initially struct shdma_slave has been introduced with the only member - an unsigned slave ID - to describe common properties of DMA slaves in an extensible way. However, experience shows, that a slave ID is indeed the only parameter, needed to identify DMA slaves. This is also, what is used by the core dmaengine API in struct dma_slave_config. We switch to using the slave_id directly, instead of passing a pointer to struct shdma_slave to improve compatibility with the core. We also make the slave_id signed for easier error checking. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20dmaengine: shdma: prepare to stop using struct dma_chan::privateGuennadi Liakhovetski
Using struct dma_chan::private is deprecated. To update the shdma driver to stop using it we first have to eliminate internal runtime uses of it. After that we will also be able to stop using it for channel configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20dmaengine: shdma: (cosmetic) simplify a static functionGuennadi Liakhovetski
dmae_find_slave() needs only the slave_id field from the slave object, no need to pass the pointer to the object, pass the slave_id directly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16dmaengine: at_hdmac: add a few const qualifiersUwe Kleine-König
This prepares of_device_id.data becoming const. Without this change the following warning would occur: drivers/dma/at_hdmac.c: In function 'at_dma_get_driver_data': drivers/dma/at_hdmac.c:1228: warning: return discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16dw_dmac: use 'u32' for LLI structure members, not dma_addr_tAndy Shevchenko
Use 'u32' for the LLI structure members, which are defined by hardware to be 32-bit. dma_addr_t is much more vague about its actual size. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16dw_dmac: mark dwc_dump_lli inlineAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-16dma: mxs-dma: Export missing symbols from mxs-dma.cAttila Kinali
mxs-dma.c provides two functions mxs_dma_is_apbh and mxs_dma_is_apbx which are used at least in mxs-mmc.c. Building mxs-mmc as module fails due to those two symbols not being exported. Signed-off-by: Attila Kinali <attila@kinali.ch> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dma: shdma: convert to the shdma base libraryGuennadi Liakhovetski
The shdma base library has originally been extracted from the shdma driver, which now can be converted to actually use it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dmaengine: add an shdma-base libraryGuennadi Liakhovetski
This patch extracts code from shdma.c, that does not directly deal with hardware implementation details and can be re-used with diverse DMA controller variants, found on SH-based SoCs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dma: move shdma driver to an own directoryGuennadi Liakhovetski
The shdma driver is going to be split into multiple files. To make this more convenient move it to an own directory. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dma: tegra: rename driver and compatible to match with dtsLaxman Dewangan
Rename the compatible name and driver name to match with tegra dts file and as per clock driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dma: tegra: fix residual calculation for cyclic caseLaxman Dewangan
In cyclic mode of DMA, the byte transferred can be more than the requested size and in this case, calculating residuals based on the current position of DMA transfer to bytes requested i.e. bytes required to transfer to reach bytes requested from current DMA position. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-02Merge branch 'imx/sparse-irq' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into next/irq From Shawn Guo <shawn.guo@linaro.org>, this makes it possible to use sparse irqs with mach-imx. * 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: enable SPARSE_IRQ for imx platform ARM: fiq: change FIQ_START to a variable tty: serial: imx: remove the use of MXC_INTERNAL_IRQS ARM: imx: remove unneeded mach/irq.h inclusion i2c: imx: remove unneeded mach/irqs.h inclusion ARM: imx: add a legacy irqdomain for mx31ads ARM: imx: add a legacy irqdomain for 3ds_debugboard ARM: imx: pass gpio than irq number into mxc_expio_init ARM: imx: leave irq_base of wm8350_platform_data uninitialized dma: ipu: remove the use of ipu_platform_data ARM: imx: move irq_domain_add_legacy call into avic driver ARM: imx: move irq_domain_add_legacy call into tzic driver gpio/mxc: move irq_domain_add_legacy call into gpio driver ARM: imx: eliminate macro IRQ_GPIOx() ARM: imx: eliminate macro IOMUX_TO_IRQ() ARM: imx: eliminate macro IMX_GPIO_TO_IRQ() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-01dma: ipu: remove the use of ipu_platform_dataShawn Guo
The struct ipu_platform_data is used by platform code to pass MXC_IPU_IRQ_START to ipu-core driver. We can save it by having ipu-core driver call irq_alloc_descs to get the irq_base. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-07-01dmaengine: sa11x0-dma: add cyclic DMA supportRussell King
Add support for cyclic DMA on sa11x0 platforms. This follows the discussed behaviour that the callback will be called at some point after period expires, and may coalesce multiple period expiries into one callback (due to the tasklet behaviour.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: sa11x0-dma: fix DMA residue supportRussell King
The semantics now implemented are: - If the cookie has completed successfully, the residue will be zero. - If the cookie is in progress or the channel is paused, it will be the number of bytes yet to be transferred. [*] - If the cookie is queued, it will be the number of bytes in the descriptor. * - where this is the number of bytes yet to be transferred to/from RAM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: ensure all descriptors are freed when channel is releasedRussell King
Ensure all queued descriptors are freed when the channel is released, ensuring we don't leak memory Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get rid of write only pool_ctr and free_txd lockingRussell King
The free function says the pl08x lock should be taken before calling it. However, the DMA pool allocation/freeing is already properly locked. The only thing that would need this is pool_ctr, which happens to be a write-only variable. Let's get rid of this, and eliminate any need for additional locking here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get rid of pl08x_prep_channel_resourcesRussell King
This function is now unnecessary; we can move its internals inline instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: fix tx_status function to return correct residueRussell King
Now that we're converted to use the generic vchan support, we can fix the residue return from tx_status to be compliant with dmaengine. This returns the number of bytes remaining for the _specified_ cookie, not the number of bytes in all pending transfers on the channel. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: convert to use vchan done listRussell King
Convert to use the virtual dma channel done list, tasklet, and descriptor freeing. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: convert to use vchan submitted/issued listsRussell King
Convert to use the virtual dma channel submitted/issued descriptor lists rather than our own private lists, and use the virtual dma channel support functions to manage these lists. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: use vchan's spinlockRussell King
Initialize the vchan struct, and use the provided spinlock rather than our own. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: convert to use virt-dma structsRussell King
Convert PL08x to use the virt-dma structures. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: rejig physical channel allocationRussell King
Rework the physical channel allocation mechanism to only allocate physical channels to virtual channels when they're about to be used. This eliminates all the complexity with holding channels while descriptors are being prepared, which is completely unnecessary. This also brings this driver to a state where the generic virtual DMA code can be used with this driver, and opens up the possibility of properly scheduling and prioritorising physical DMA channels to virtual DMA channels. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: start next descriptor from irq contextRussell King
Rather than waiting for the tasklet to run, we can start the next descriptor from interrupt context, as soon as we know that the previous descriptor has completed. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: split the pend_list in twoRussell King
Our behaviour wasn't correct; issue_pending is supposed to be called before any submitted descriptors are available for processing by the DMA engine. Split the pend_list in two, one for submitted descriptors and another list for issued descriptors. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: re-jig the starting of txdsRussell King
Rather than code the de-queue of the txd several times, move that into the start_txd function. Rename this to better illustrate what it's now doing, and call this function when starting a delayed memcpy(). Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: remove waiting descriptor pointerRussell King
As we no longer need to pass a descriptor to prep_phy_channel(), we don't need to keep track of the descriptor which is waiting for a channel to become available. So let's get rid of it. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: move DMA signal muxing into slave prepare codeRussell King
Move the DMA request muxing into the slave prepare code and txd release/completion code. This means we only hold the DMA request mux while there are descriptors waiting to be started or are in progress. This leaves txd->direction as a write-only variable; remove it. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: convert to a list of completed descriptorsRussell King
Convert PL08x to use a list of completed descriptors rather than merely relying upon a single pointer. This makes it possible to schedule the tasklet for other purposes, and makes our behaviour similar to virt-dma. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: track mux usage on a per-channel basis.Russell King
Keep track of the number of descriptors currently using a MUX setting on a per-channel basis. This allows us to know when we have descriptors queued somewhere which have been assigned a DMA request signal. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan structRussell King
Move the signal handling out of the physical channel structure into the virtual channel structure, where it should belong as it has more to do with the virtual channel than the physical one. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: split DMA signal muxing from channel allocRussell King
Split the DMA request mux signal handling from the physical channel allocation code. The physical channel has very little to do with the DMA request input which will be used, so these should be two separate operations. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get rid of unnecessary checks in dma_slave_configRussell King
Get rid of the unnecessary checks in dma_slave_config utilizing the DMA direction. This allows us to move the computation of cctl to the prepare function. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: ignore 'direction' argument in dma_slave_configRussell King
Ignore the direction argument in dma_slave_config, and configure both directions independently. We still check that the configuration for the intended direction is valid; this check will eventually be dropped. This check is just for debugging at present. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v0.10.2 at 2024-11-12 05:27:45 (GMT)