summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2009-12-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: edac, mce, amd: silence GART TLB errors edac, mce: correct corenum reporting
2009-12-16edac, mce, amd: silence GART TLB errorsBorislav Petkov
Although reporting of benign GART TLB errors is disabled in __mcheck_cpu_apply_quirks, those are still being logged, and, as a result, trip up amd64_edac. Pull up reporting check so that machines with loaded edac module bail out early and don't spit fragments into dmesg. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-16edac: i5100 add 6 ranks per channelNils Carlson
Add support for 6 ranks per channel to the i5100 chipset. I have tested the patch as far as possible with correctible errors and things appear good. The DIMM mapping is correct for our board, but boards may differ. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Acked-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16edac: i5100 add scrubbingNils Carlson
Addscrubbing to the i5100 chipset. The i5100 chipset only supports one scrubbing rate, which is not constant but dependent on memory load. The rate returned by this driver is an estimate based on some experimentation, but is substantially closer to the truth than the speed supplied in the documentation. Also, scrubbing is done once, and then a done-bit is set. This means that to accomplish continuous scrubbing a re-enabling mechanism must be used. I have created the simplest possible such mechanism in the form of a work-queue which will check every five minutes. This interval is quite arbitrary but should be sufficient for all sizes of system memory. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16edac: i5100 clean controller to channel termsNils Carlson
The i5100 driver uses the word controller instead of channel in a lot of places, this is simply a cleanup of the patch. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15edac, mce: correct corenum reportingBorislav Petkov
Fix core number reporting with NB MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-11x86, msr: Add support for non-contiguous cpumasksBorislav Petkov
The current rd/wrmsr_on_cpus helpers assume that the supplied cpumasks are contiguous. However, there are machines out there like some K8 multinode Opterons which have a non-contiguous core enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see http://www.gossamer-threads.com/lists/linux/kernel/1160268. This patch fixes out-of-bounds writes (see URL above) by adding per-CPU msr structs which are used on the respective cores. Additionally, two helpers, msrs_{alloc,free}, are provided for use by the callers of the MSR accessors. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20091211171440.GD31998@aftab> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-08amd64_edac: bump driver versionBorislav Petkov
This was long overdue ... Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: fix use-uninitialised bugAndrew Morton
drivers/edac/amd64_edac.c: In function 'amd64_edac_init': drivers/edac/amd64_edac.c:2840: warning: 'ret' may be used uninitialized in this function Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: correct sys address to chip select mappingBorislav Petkov
The routine does the reverse mapping of the error address of a CECC back to the node id, DRAM controller and chip select of the DIMM which caused the error. We should lookup the channel using the syndromes _only_ when the DCTs are ganged so fix that. Also, add an early exit when there's an error while scanning for the csrow thus decreasing indentation levels for better readability. Finally, fixup comments. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: add a leaner syndrome decoding algorithmBorislav Petkov
Instead of using the whole syndrome tables for channel decoding, use a set of eigenvectors with which the tables can be generated to search for the syndrome in error. The algorithm operates independently of symbol size and can be used for both x4 and x8 syndromes. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove early hw support checkBorislav Petkov
The .probe_valid_hardware low_ops member checked whether the DCTs are in DDR3 mode and bailed out if so. Now that all the needed changes for DDR3 support is in place, remove it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: detect DDR3 memory typeBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07edac: add memory types strings for debuggingBorislav Petkov
Instead of using deeply-nested conditionals for dumping the DIMM type in debug mode, add a strings array of the supported DIMM types. This is useful in cases where an edac driver supports multiple DRAM types and is only defined in debug builds. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07edac, mce: update AMD F10h revD checkBorislav Petkov
F10h revD start with model number 8. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove unneeded extract_error_address wrapperBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: rename StinkyIdentifierBorislav Petkov
SystemAddress -> sys_addr Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove superfluous dbg printkBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: enhance address to DRAM bank mappingBorislav Petkov
Add cs mode to cs size mapping tables for DDR2 and DDR3 and F10 and all K8 flavors and remove klugdy table of pseudo values. Add a low_ops->dbam_to_cs member which is family-specific and replaces low_ops->dbam_map_to_pages since the pages calculation is a one liner now. Further cleanups, while at it: - shorten family name defines - align amd64_family_types struct members Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup f10_early_channel_countBorislav Petkov
Do not read DCLR[01] again since this is done in amd64_read_mc_registers() earlier. There can be more than two physical DIMMs present so clamp the channels value to max 2. Also, do not report DCT data width - it is also done earlier. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: dump DIMM sizes on K8 tooBorislav Petkov
Extend f10_debug_display_dimm_sizes to dump the logical DIMMs configuration on K8 revF too. Remove the ganged arg since we print the DCT operating mode (ganged vs unganged) earlier. Also, DCT csrow configuration is relevant therefore dump it as KERN_DEBUG instead of only on debug builds. Remove misleading DIMM output since there's no reliable way of mapping of chip selects to actual physical DIMMs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup rest of amd64_dump_misc_regsBorislav Petkov
Clarify bitfields description, add PCI config function/offset names to registers for easy reference, simplify code layout, remove unneeded info. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup DRAM cfg low debug outputBorislav Petkov
Carve out the register-specific debug statements into a separate function, clarify meanings of the single bitfields in the register, remove irrelevant output and macros. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: wrap-up pci config read error handlingBorislav Petkov
Add a pci config read wrapper for signaling pci config space access errors instead of them being visible only on a debug build. This is important on amd64_edac since it uses all those pci config register values to access the DRAM/DIMM configuration of the nodes. In addition, the wrapper makes a _lot_ (look at the diffstat!) of error handling code superfluous and improves much of the overall code readability by removing error handling details out of the way. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: unify MCGCTL ECC switchingBorislav Petkov
Unify almost identical code into one function and remove NUMA-specific usage (specifically cpumask_of_node()) in favor of generic topology methods. Remove unused defines, while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07cpumask: use modern cpumask style in drivers/edac/amd64_edac.cRusty Russell
cpumask_t -> struct cpumask, and don't put one on the stack. (Note: this is actually on the stack unless CONFIG_CPUMASK_OFFSTACK=y). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: make DRAM regions output more human-readableBorislav Petkov
Do not shift the TOP_MEM and TOP_MEM2 values by 23 but rather save the whole 64-bit value read from the MSR. Although the TOP_MEM/TOP_MEM2 bits are only a subset of the 64bit register, the values are correct since the remaining bits are Read-As-Zero and no shifting is needed. Also, cleanup DRAM base/limit debug output. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: clarify DRAM CTL debug reportingBorislav Petkov
Make debug info formulations about the DRAM and DCT configuration of the machine more human readable. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-03Merge branch 'perf/mce' into perf/coreIngo Molnar
Merge reason: It's ready for v2.6.33. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04amd64_edac: fix CECCs reportingBorislav Petkov
Shift error type bits properly. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-11-04amd64_edac: fix a wrong goto clause in amd64_edac.cLi Hong
In amd64_edac_init(void) in amd64_edac.c, cache_k8_northbridges() is called before pci_register_driver. If it fails, should exit with err directly. Signed-off-by: Li Hong <lihong.hi@gmail.com> Acked-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-29edac: i5100 fix initialization codeKeith Mannthey
Allow csrows to properly initialize when the topology only has active channels on 2 and 3. This new check allows proper detection and initialization in this topology. Only checking the first mrt that represented channels 0 and 1 is not sufficient. I also fixed up the related debug information path. I can submit as a 2nd patch if needed. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Acked-by: Aristeu Rozanski <aris@ruivo.org> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29edac: i5400 fix missing CONFIG_PCI defineIra W. Snyder
When building without CONFIG_PCI the edac_pci_idx variable is unused, causing a build-time warning. Wrap the variable in #ifdef CONFIG_PCI, just like the rest of the PCI support. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29edac: i5400 fix csrow mappingJeff Roberson
The i5400 EDAC driver has several bugs with chip-select row computation which most likely lead to bugs in detailed error reporting. Attempts to contact the authors have gone mostly unanswered so I am presenting my diff here. I do not subscribe to lkml and would appreciate being kept in the cc. The most egregious problem was miscalculating the addresses of MTR registers after register 0 by assuming they are 32bit rather than 16. This caused the driver to miss half of the memories. Most motherboards tend to have only 8 dimm slots and not 16, so this may not have been noticed before. Further, the row calculations multiplied the number of dimms several times, ultimately ending up with a maximum row of 32. The chipset only supports 4 dimms in each of 4 channels, so csrow could not be higher than 4 unless you use a row per-rank with dual-rank dimms. I opted to eliminate this behavior as it is confusing to the user and the error reporting works by slot and not rank. This gives a much clearer view of memory by slot and channel in /sys. Signed-off-by: Jeff Roberson <jroberson@jroberson.net> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-16amd64_edac: fix DRAM base and limit extraction masks, v2Borislav Petkov
This is a proper fix as a follow-up to 66216a7 and 916d11b. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-12mce, edac: Use an atomic notifier for MCEs decodingBorislav Petkov
Add an atomic notifier which ensures proper locking when conveying MCE info to EDAC for decoding. The actual notifier call overrides a default, negative priority notifier. Note: make sure we register the default decoder only once since mcheck_init() runs on each CPU. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20091003065752.GA8935@liondog.tnic> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pci: Correct spelling in a comment x86: Simplify bound checks in the MTRR code x86: EDAC: carve out AMD MCE decoding logic initcalls: Add early_initcall() for modules x86: EDAC: MCE: Fix MCE decoding callback logic
2009-10-07amd64_edac: beef up DRAM error injectionBorislav Petkov
When injecting DRAM ECC errors (F3xBC_x8), EccVector[15:0] is a bitmask of which bits should be error injected when written to and holds the payload of 16-bit DRAM word when read, respectively. Add /sysfs members to show the DRAM ECC section/word/vector. Fail wrong injection values entered over /sysfs instead of truncating them. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix DRAM base and limit extractionBorislav Petkov
On Fam10h and above, F1x[1, 0][7C:40] are DRAM Base/Limit registers which specify the destination node of a DRAM address. Those address boundaries are being extracted into ->dram_base[] and ->dram_limit[]. Correct the extraction masks to match the respective address bits. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix chip select handlingBorislav Petkov
Different processor families support a different number of chip selects. Handle this in a family-dependent way with the proper values assigned at init time (see amd64_set_dct_base_and_mask). Remove _DCSM_COUNT defines since they're used at one place and originate from public documentation. CC: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: simple fix to allow reporting of CECC errorsKeith Mannthey
This allows the errors to be further decoded and mapped to csrows. Tested with ECC debug dimms and an Rev F cpu based system. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix K8 intlv_sel checkBorislav Petkov
The check when DRAM interleaving is enabled should be done against the pvt->dram_IntlvSel field and not against the ->dram_limit. Simplify first loop and fixup printk formatting while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix interleave enable testsBorislav Petkov
The pvt->dram_IntlvEn saves the 3 "Interleave Enable" bits already right-shifted by 8 so the check in find_mc_by_sys_addr() by shifting the values to the left 8 bits is wrong. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix DRAM base and limit address extractionBorislav Petkov
K8 DRAM base and limit addresses from F1x40 +8*i and F1x44 + 8*i, where i in (0..7) are both bits 39-24 and therefore the shifting should be done by 24 and not by 8. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix driver instance lookup table allocationBorislav Petkov
Allocate memory statically for 8-node machines max for simplicity instead of relying on MAX_NUMNODES which is 0 on !CONFIG_NUMA builds. Spotted by Jan Beulich. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-02x86: EDAC: carve out AMD MCE decoding logicBorislav Petkov
This converts the MCE decoding logic into a standalone config option which can be built-in or a module, the first one being the default for MCEs happening early on in the boot process. This, beyond being separated in a cleaner way, also saves RAM by making the decoding logic modular. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <20091002133148.GD28682@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02x86: EDAC: MCE: Fix MCE decoding callback logicIngo Molnar
Make decoding of MCEs happen only on AMD hardware by registering a non-default callback only on CPU families which support it. While looking at the interaction of decode_mce() with the other MCE code i also noticed a few other things and made the following cleanups/fixes: - Fixed the mce_decode() weak alias - a weak alias is really not good here, it should be a proper callback. A weak alias will be overriden if a piece of code is built into the kernel - not good, obviously. - The patch initializes the callback on AMD family 10h and 11h. - Added the more correct fallback printk of: No support for human readable MCE decoding on this CPU type. Transcribe the message and run it through 'mcelog --ascii' to decode. On CPUs that dont have a decoder. - Made the surrounding code more readable. Note that the callback allows us to have a default fallback - without having to check the CPU versions during the printout itself. When an EDAC module registers itself, it can install the decode-print function. (there's no unregister needed as this is core code.) version -v2 by Borislav Petkov: - add K8 to the set of supported CPUs - always build in edac_mce_amd since we use an early_initcall now - fix checkpatch warnings Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <20091001141432.GA11410@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24edac: core: remove completion-wait for complete with rcu_barrierJesper Dangaard Brouer
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c and edac_pci.c. They all use a wait_for_completion() scheme, but this scheme it not 100% safe on multiple CPUs. See the _rcu_barrier() implementation which explains why extra precausion is needed. The patch adds a comment about rcu_barrier() and as a precausion calls rcu_barrier(). A maintainer needs to look at removing the wait_for_completion code. [dougthompson@xmission.com: remove the wait_for_completion code] Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24edac: i3200 memory controller driverJason Uhlenkott
A driver for the Intel 3200 and 3210 memory controllers. It has only had light testing so far, and currently makes no attempt to decode error addresses at anything finer than csrow granularity. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24edac: fix resource size calculationJulia Lawall
Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>