summaryrefslogtreecommitdiff
path: root/drivers/extcon
AgeCommit message (Collapse)Author
2015-06-13extcon: Redefine the unique id of supported external connectors without ↵Chanwoo Choi
'enum extcon' type This patch just redefine the unique id of supported external connectors without 'enum extcon' type. Because unique id would be used on devictree file(*.dts) to indicate the specific external connectors like key number of input framework. So, I have the plan to move this definitions to following header file which includes the unique id of supported external connectors. - include/dt-bindings/extcon/extcon.h Fixes: 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-29extcon: Remove optional print_name() function pointer of extcon_devChanwoo Choi
This patch removes the optional print_name() function pointer included in 'struct extcon_dev' because the extcon must maintain the consistent name of extcon device on sysfs instead of inconsistent name. After merged patch[1], extcon can maintain the consistent name of extcon device without any hard-coded device name. [1] https://lkml.org/lkml/2015/4/27/258 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-22extcon: Update the prototype of extcon_register_notifier() with enum extconChanwoo Choi
Previously, extcon consumer driver used the extcon_register_interest() to register the notifier chain and then to receive the notifier event when external connector's state is changed. When registering the notifier chain for specific external connector with extcon_register_interest(), it used the the string name of external connector directly. There are potential problem because of unclear, non-standard and inconsequent cable name. Namely, it is not appropriate method to identify each external connector. So, this patch modify the prototype of extcon_register_notifier() by using the 'enum extcon' which are the unique id for each external connector instead of unclear string method. - Previously, the extcon consumer driver used the extcon_register_interest() with 'cable_name' to point out the specific external connector. Also. it used the un-needed structure (struct extcon_specific_cable_nb). : int extcon_register_interest(struct extcon_specific_cable_nb *obj, const char *extcon_name, const char *cable_name, struct notifier_block *nb) - Newly, the updated extcon_register_notifier() would definitely support the same feature to detech the changed state of external connector without any specific structure (struct extcon_specific_cable_nb). : int extcon_register_notifier(struct extcon_dev *edev, enum extcon id, struct notifier_block *nb) This patch support the both extcon_register_interest() and new extcon_register_ notifier(). But the extcon_{register|unregister}_interest() will be deprecated because extcon core would support the notifier event for extcon consumer driver with only updated extcon_register_notifier() and 'extcon_specific_cable_nb' will be removed if there are no extcon consumer driver with legacy extcon_{register|unregister}_interest(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-05-22extcon: Use capital letter for the name of external connectorsChanwoo Choi
This patch uses the capital letter for the name of external connectors to improve the readability instead of small letter. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-22extcon: Use the unique id for external connector instead of stringChanwoo Choi
This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* USB external connector */ EXTCON_USB = 0x1, EXTCON_USB_HOST = 0x2, /* Charger external connector */ EXTCON_TA = 0x10, EXTCON_FAST_CHARGER = 0x11, EXTCON_SLOW_CHARGER = 0x12, EXTCON_CHARGE_DOWNSTREAM = 0x13, /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, EXTCON_LINE_OUT = 0x21, EXTCON_MICROPHONE = 0x22, EXTCON_HEADPHONE = 0x23, EXTCON_HDMI = 0x30, EXTCON_MHL = 0x31, EXTCON_DVI = 0x32, EXTCON_VGA = 0x33, EXTCON_SPDIF_IN = 0x34, EXTCON_SPDIF_OUT = 0x35, EXTCON_VIDEO_IN = 0x36, EXTCON_VIDEO_OUT = 0x37, /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, EXTCON_JIG = 0x51, EXTCON_MECHANICAL = 0x52, EXTCON_END, }; For example in extcon-arizona.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the unique id for external connector insteadf of string] Reported-by: Arnd Bergmann <arnd@arndb.de> [dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()] Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-05-20extcon: usb-gpio: use flags argument of devm_gpiod_get to set directionUwe Kleine-König
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Without this patch there is no call to gpiod_direction_input but the gpio is used for irq reporting and for that the line should be in input mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: Remove the optional name of extcon deviceChanwoo Choi
This patch removes the optional name of extcon device. Instead, extcon_dev_register() set the device name as 'extcon[number]' naming pattern. - /sys/class/extcon/[hardcoded device name] -> /sys/class/extcon/extcon[number] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Jaewon Kim <jaewon02.kim@samsung.com>
2015-05-19extcon: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. If GPIOLIB=n and asm-generic/gpio.h is not used: drivers/extcon/extcon-usb-gpio.c: In function ‘usb_extcon_detect_cable’: drivers/extcon/extcon-usb-gpio.c:63: error: implicit declaration of function ‘gpiod_get_value_cansleep’ drivers/extcon/extcon-usb-gpio.c: In function ‘usb_extcon_probe’: drivers/extcon/extcon-usb-gpio.c:116: error: implicit declaration of function ‘devm_gpiod_get’ drivers/extcon/extcon-usb-gpio.c:116: warning: assignment makes pointer from integer without a cast drivers/extcon/extcon-usb-gpio.c:122: error: implicit declaration of function ‘gpiod_set_debounce’ drivers/extcon/extcon-usb-gpio.c:129: error: implicit declaration of function ‘gpiod_to_irq’ Add the missing #include <linux/gpio/consumer.h> to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: adc-jack: Remove the unneeded num_cables fieldChanwoo Choi
This patch removes the 'num_cables' filed from 'struct adc_jack_pdata' because 'struct extcon_dev' contains the 'max_supported' field which means the number of supported cable of extcon device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: Alter MHL-TA cable name to TA cable nameChanwoo Choi
This patch alters the MHL-TA cable name to TA cable name because MHL-TA is not standard name. The MHL-TA is MHL cable with charger cable (TA or USB). So, this patch use the TA cable instead of MHL-TA to inform the charger cable state. - MHL-TA -> TA Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-05-19extcon: Unify the dock device names on max8997/77693Chanwoo Choi
This patch change the name of various dock devices as 'DOCK' because the name of various dock devices have not the standard naming rules. The name of dock devices include the differenct word but it is ambiguous and never important information on user-space aspect. This patch unifies the name of dock devices as following: - Dock-Smart -->|--> DOCK - Dock-Desk -->| - Dock-Audio -->| - Dock-Card -->| Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-05-19extcon: Unify the jig cable names on rt8973 and max14577/77693/77843Chanwoo Choi
This patch change the name of various jig cables as 'JIG' because the name of various jig cables are strange and ambiguous on user-space aspect. They include the different information of either USB and UART state. It is never important for user-space process. This patch unifies the name of jig cables as following: - JIG-USB-ON -->|--> JIG - JIG-USB-OFF -->| - JIG-UART-ON -->| - JIG-UART-OFF -->| Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: arizona: Add support for select accessory detect mode when headphone ↵Inha Song
detection This patch add support for select accessory detect mode to HPDETL or HPDETR. Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins to measure the impedance of an external load connected to the headphone. Depending on board design, headphone detect pins can change to HPDETR or HPDETL. Signed-off-by: Inha Song <ideal.song@samsung.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: arizona: Apply HP clamps correctly for WM8280Charles Keepax
The headphone clamping is not set correctly currently, this was missed because the wm8280 patches and the patch fixing the clamping for wm5110 went upstream at very similar times. This patch sets the headphone clamping correctly for wm8280. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: arizona: Remove the setting of device nameChanwoo Choi
This patch removes the setting of device name. Instead, extcon_dev_register() set the device name such as 'extcon[number]' naming method. - /sys/class/extcon/Headset Jack -> /sys/class/extcon/extcon[number] Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2015-05-19extcon: Fix the checkpatch warning and minor coding style issueChanwoo Choi
This patch clean up the extcon core driver by fixing the checkpatch warning and minor coding style issue. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: Add extcon_get_edev_name() API to get the extcon device nameChanwoo Choi
This patch adds the extcon_get_edev_name() API to get the name of extcon device because all information inclued in the structure extcon_dev should be accessed by extcon core API instead of directly accessing the data. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: Modify the device name as extcon[X] for sysfsChanwoo Choi
This patch modify the device name as extcon[X] for sysfs by using the 'extcon' prefix word instead of separate device name. On user-space aspect, user would find the some extcon drvier with extcon[X] pattern. So, this patch modify the device name as following: - /sys/class/extcon/[device name] -> /sys/class/extcon/extcon[X] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: axp288: Add axp288 extcon driver supportRamakrishna Pallala
This patch adds the extcon support for AXP288 PMIC which has the BC1.2 charger detection capability. Additionally it also adds the USB mux switching support b/w SOC and PMIC based on GPIO control. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> [cw00.choi: Modify the log message to keep the consistent log message pattern] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: arizona: Rename hpdet_ip to make its purpose clearerRichard Fitzgerald
Renamed to hpdet_ip_version to make it clearer what it does and that the value in it is simply a version number. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19extcon: Add manufactor name of each extcon deviceChanwoo Choi
This patch adds the manufactor name of each extcon device and removes un-necessary comment in Kconfig. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-04-27extcon: usb-gpio: register extcon device before IRQ registrationRobert Baldyga
IRQ handler touches info->edev, so if interrupt occurs before extcon device initialization it can cause NULL pointer dereference. Doing extcon initialization before IRQ handler registration fixes this problem. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-04-21Merge tag 'char-misc-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patchset for 4.1-rc1. Lots of different driver subsystem updates here, nothing major, full details are in the shortlog. All of this has been in linux-next for a while" * tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits) mei: trace: remove unused TRACE_SYSTEM_STRING DTS: ARM: OMAP3-N900: Add lis3lv02d support Documentation: DT: lis302: update wakeup binding lis3lv02d: DT: add wakeup unit 2 and wakeup threshold lis3lv02d: DT: use s32 to support negative values Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case mei: replace check for connection instead of transitioning mei: use mei_cl_is_connected consistently mei: fix mei_poll operation hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg() Drivers: hv: hv_balloon: survive ballooning request with num_pages=0 Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function Drivers: hv: hv_balloon: do not online pages in offline blocks hv: remove the per-channel workqueue hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind() hv: run non-blocking message handlers in the dispatch tasklet coresight: moving to new "hwtracing" directory coresight-tmc: Adding a status interface to sysfs coresight: remove the unnecessary configuration coresight-default-sink ...
2015-03-23extcon: Fix missing locking when [un]registering notifiersHans de Goede
Since extcon.c is using raw_notifiers it must protect the notifier list itself when [un]registering notifiers to avoid the list changing while extcon_update_state is walking the list (through raw_notifier_call_chain). Signed-off-by: Hans de Goede <hdegoede@redhat.com> [cw00.choi: Apply this patch to extcon.c driver instead of old extcon-class.c] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-23extcon: max77843: Fix an error code in max77843_init_muic_regmap()Dan Carpenter
The i2c_new_dummy() return the NULL if error happen. So, If i2c_new_dummy() return NULL, max77843_init_muic_regmap() return the proper error value (-ENOMEM); Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [cw00.choi: Use -ENOMEM instead of -ENODEV and modify patch description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-16extcon: max77843: Fix signedness bug in max77843_muic_set_debounce_time()Dan Carpenter
This patch fixes the variable type of 'ret' from 'unsigned int' to 'int' type because the return type of regmap_update_bits() is 'int' type. Fixes: 27a28d32b4f2 ('extcon: max77843: Add max77843 MUIC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [cw00.choi: Fix the patch description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-07extcon: Fix the checkpatch warningChanwoo Choi
This patch fixes the checkpatch warning about coding style. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-07extcon: Rename extcon core driverChanwoo Choi
This patch renames the extcon core driver from extcon-class.c to extcon.c because '-class' postfix is not necessary. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-04extcon: arizona: Fix headphone clamping on wm5110Charles Keepax
wm5110 requires slightly different configuration of the headphone clamps to other Arizona devices. Otherwise headphone detection accuracy will be way off. This patch adds the needed clamping. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-04extcon: arizona: Deobfuscate arizona_extcon_do_magicCharles Keepax
arizona_extcon_do_magic does not lend a lot of clarity to the purpose of the function, and as all the registers used are described in the datasheet there is no need to obfuscate the code. This patch renames the function to arizona_extcon_hp_clamp, as it controls clamping on the headphone output. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-02-26extcon: arizona: Add support for WM8280/WM8281Richard Fitzgerald
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-24extcon: max77843: Add max77843 MUIC driverJaewon Kim
This patch adds MAX77843 extcon driver to support for MUIC(Micro USB Interface Controller) device by using EXTCON subsystem to handle various external connectors. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-02-24extcon: usb-gpio: Introduce gpio usb extcon driverRoger Quadros
This driver observes the USB ID pin connected over a GPIO and updates the USB cable extcon states accordingly. The existing GPIO extcon driver is not suitable for this purpose as it needs to be taught to understand USB cable states and it can't handle more than one cable per instance. For the USB case we need to handle 2 cable states. 1) USB (attach/detach) 2) USB-HOST (attach/detach) This driver can be easily updated in the future to handle VBUS events in case it happens to be available on GPIO for any platform. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-02-24extcon: max77693: Use HOST term to express USB-HOST cable instead of OTG termJaewon Kim
This patch unifies the term called 'USB_OTG' and 'USB_HOST' into USB_HOST. OTG(On-The-Go) function supports USB host and this driver sents 'USB-Host event. So, unifies term to USB_HOST. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> [cw00.choi: Fix patch title to indicate the correct meaning of patch] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-02-24extcon: max77693: Fix cable name of MHL-TAJaewon Kim
This patch fixes extcon cable name of MHL-TA instead of MHL_TA to unify cable name style. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-01-26extcon: max77693: Constify struct regmap_configKrzysztof Kozlowski
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-01-26extcon: adc-jack: Release IIO channel on driver removeIvan T. Ivanov
Release IIO channel acquired during driver probe. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-01-26extcon: Remove duplicated include from extcon-class.cWei Yongjun
Remove duplicated "of.h" header file. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-12-15Merge tag 'char-misc-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ...
2014-11-24extcon: max14577: Fix obvious typo in company name in copyrightKrzysztof Kozlowski
Fix a typo in name of company in copyright comment. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-11-24extcon: max77693: Fix cable name of JIG_UART_ONKrzysztof Kozlowski
When JIG was set to "boot on" mode, the UART connection did not work because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON cable. This was introduced in 39bf369e4ed3 ("extcon: max77693: Add support dock device and buttons") while adding dock features. Assign the JIG-UART-ON back to UART path. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [cw00.choi: Modify the patch name to remove specific board name] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-11-24extcon: Implement OF-based extcon lookup properlyTomasz Figa
Platform bus is not the only way to have extcon devices, so current implementation of of_extcon_get_extcon_dev() is broken. Also using parent device node only to get device name is quite ugly. This patch reimplements of_extcon_get_extcon_dev() to do exactly the same as extcon_get_extcon_dev() but instead of comparing names, compare node pointers. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> [mszyprow: simplified the code] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-10-20extcon: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-22extcon: gpio: Fix code cleanupGeorge Cherian
This patch fixes following minor cleanup: - Order the include files in alphabetical order. - Fix description of state_off in extcon_gpio.h - Add a descrition for check_on_resume in extcon_gpio.h Signed-off-by: George Cherian <george.cherian@ti.com> [Modify the name/description of patch to keep standary codiyg style by Chanwoo Choi] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22extcon: max77693: Fix a bug occured at changing ADC debounce time.Jonghwa Lee
When it writes some value other than 0 to BTLDset and JIGset, muic device will be reset automatically. And it happens during updating ADC debounce time, because it shares same register. To update ADC debounce time without reset, set value only to ADCDbset and 0 to BTLDset and JIGset. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> [Remove un-needed masking operation by Chanwoo Choi] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22extcon: sm5502: Drop useless includeJean Delvare
Don't include <linux/input.h> when the driver does not use anything from this header file. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-22extcon: max77693: Use resource managed interrupt lineKrzysztof Kozlowski
Use resource managed interrupt line devm_request_threaded_irq() to simplify a little cleanup paths: - no goto to cleanup label, - simpler remove function. Overall the driver size is decreased by 11 line of code. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22extcon: rt8973a: Add Richtek RT8973A extcon driverChanwoo Choi
This patch add support for Richtek RT8973A which is Micro USB Switch OVP and i2c interface. The RT8973A is a USB port accessory detector and switch that is optimized to protect low voltage system from abnormal high input voltage (up to 28V) and supports high speed USB operation. Also, RT8973A support 'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A would control internal h/w patch for USB D-/D+ switching. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-09-22extcon: sm5502: Clean up codes by using checkpatch scriptChanwoo Choi
This patch just clean up codes by using checkpatch script and fix warning message about if statement. - the result of checkpatch script as following: WARNING: void function return statements are not generally useful + return; +} WARNING: quoted string split across lines + dev_err(info->dev, "failed: irq request (IRQ: %d," + " error :%d)\n", muic_irq->irq, ret); - warning message about coding style. drivers/extcon/extcon-sm5502.c:398 sm5502_muic_cable_handler() warn: we tested 'attached' before and it was 'false' Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-09-22extcon: sm5502: Move sm5502.h header file to extcon directoryChanwoo Choi
This patch move sm5502.h header file from 'include/linux/extcon' to 'driver/extcon' because sm5502.h is used for driver/extcon/extcon-sm5502.c. and remove duplicate license description. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>