summaryrefslogtreecommitdiff
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2010-06-02firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony ↵Stefan Richter
camcorder Per IEEE 1394 clause 8.4.2.3, a contender for the IRM role shall check whether the current IRM complies to 1394a-2000 or later. If not force a compliant node (e.g. itself) to become IRM. This was implemented in the older ieee1394 driver but not yet in firewire-core. An older Sony camcorder (Sony DCR-TRV25) which implements 1394-1995 IRM but neither 1394a-2000 IRM nor BM was now found to cause an interoperability bug: - Camcorder becomes root node when plugged in, hence gets IRM role. - firewire-core successfully contends for BM role, proceeds to perform gap count optimization and resets the bus. - Sony camcorder ignores presence of a BM (against the spec, this is a firmware bug), performs its idea of gap count optimization and resets the bus. - Preceding two steps are repeated endlessly, bus never settles, regular I/O is practically impossible. http://thread.gmane.org/gmane.linux.kernel.firewire.user/3913 This is an interoperability regression from the old to the new drivers. Fix it indirectly by adding the 1394a IRM check. The spec suggests three and a half methods to determine 1394a compliance of a remote IRM; we choose the method of testing the Config_ROM.Bus_Info.generation field. This is data that firewire-core should have readily available at this point, i.e. does not require extra I/O. Reported-by: Clemens Ladisch <clemens@ladisch.de> (missing 1394a check) Reported-by: H. S. <hs.samix@gmail.com> (issue with Sony DCR-TRV25) Tested-by: H. S. <hs.samix@gmail.com> Cc: <stable@kernel.org> # .32.x and newer Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: schedule for removal firewire: core: use separate timeout for each transaction firewire: core: Fix tlabel exhaustion problem firewire: core: make transaction label allocation more robust firewire: core: clean up config ROM related defined constants ieee1394: mark char device files as not seekable firewire: cdev: mark char device files as not seekable firewire: ohci: cleanups and fix for nonstandard build without debug facility firewire: ohci: wait for PHY register accesses to complete firewire: ohci: fix up configuration of TI chips firewire: ohci: enable 1394a enhancements firewire: ohci: do not clear PHY interrupt status inadvertently firewire: ohci: add a function for reading PHY registers Trivial conflicts in Documentation/feature-removal-schedule.txt
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-18firewire: core: use separate timeout for each transactionClemens Ladisch
Using a single timeout for all transaction that need to be flushed does not work if the submission of new transactions can defer the timeout indefinitely into the future. We need to have timeouts that do not change due to other transactions; the simplest way to do this is with a separate timer for each transaction. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (+ one lockdep annotation)
2010-05-18firewire: core: Fix tlabel exhaustion problemPeter Hurley
fw_core_handle_response() was not properly clearing tlabel_mask. This was resulting in premature tlabel exhaustion. Signed-off-by: Peter Hurley <phurley@charter.net> This fixes an omission in 2.6.31-rc1 commit 1e626fdc "firewire: core: use more outbound tlabels" which prevented to really use 64 instead of 32 transaction labels, as soon as split transactions occurred that had their AR-resp tasklet run after the AT-req tasklet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-23Merge branch 'master' into for-nextJiri Kosina
2010-04-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: wait for local CSR lock access to finish firewire: ohci: prevent aliasing of locally handled register addresses firewire: core: fw_iso_resource_manage: return -EBUSY when out of resources firewire: core: fix retries calculation in iso manage_channel() firewire: cdev: fix cut+paste mistake in disclaimer
2010-04-19firewire: core: make transaction label allocation more robustClemens Ladisch
If one request is so long-lived that it does not get a response before the following 63 requests, its bit in tlabel_mask is still set when the next request tries to allocate a transaction label for that number. In this state, while the first request is not completed or timed out, no new requests can be submitted. To fix this, skip over any label still in use, and do not error out unless we have entirely run out of labels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-19firewire: core: clean up config ROM related defined constantsStefan Richter
Clemens Ladisch pointed out that - BIB_IMC is not named like the field is called in the standard, - readers of the code may get worried about the magic 0x0c0083c0, - a CSR_NODE_CAPABILITIES key is there in the header but not put to good use. So let's rename BIB_IMC, add a defined constant for Node_Capabilities and a comment which reassures people that somebody thought about it and they don't have to (or if they still do, tell them where they have to look for confirmation), and prune our incomplete and arbitrary set of defined constants of CSR key IDs. And there is a nother magic number, that of Bus_Information_Block.Bus_Name, to be defined and commented. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-19firewire: ohci: wait for local CSR lock access to finishClemens Ladisch
Add a loop to wait for the controller to finish a locally-initiated CSR lock operation. Google shows some occurrences of the "swap not done yet" message which might indicate that some OHCI controllers are not fast enough to do the lock/swap in the time needed for one PCI access. This also correctly handles the case where the lock operation did not finish, instead of silently returning an uninitialized value. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-19firewire: ohci: prevent aliasing of locally handled register addressesClemens Ladisch
We must compute the offset from the CSR register base with the full 48 address bits to prevent matching with addresses whose lower 32 bits happen to be equal with one of the specially handled registers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-19firewire: core: fw_iso_resource_manage: return -EBUSY when out of resourcesClemens Ladisch
Returning -EIO for all errors would not allow clients to determine if the resource allocation process itself failed, or if the resources are not available. (The latter information is needed by CMP to synchronize restoring of overlayed connections after a bus reset.) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-19firewire: core: fix retries calculation in iso manage_channel()Clemens Ladisch
If there is a permanent error condition when communicating with the IRM, after the sixth error, the retry variable will be decremented to -1. If, in this case, the bits in channels_mask are not yet exhausted, the next channel is retried 2^32 times. To fix this, check that retry is never decremented beyond zero. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: cdev: change license of exported header files to MIT license firewire: cdev: comment fixlet firewire: cdev: iso packet documentation firewire: cdev: fix information leak firewire: cdev: require quadlet-aligned headers for transmit packets firewire: cdev: disallow receive packets without header
2010-04-10firewire: cdev: mark char device files as not seekableStefan Richter
The <linux/firewire-cdev.h> character device file ABI (i.e. /dev/fw* character device file interface) does not make any use of lseek(), pread(), pwrite() (or any kind of write() at all). Use nonseekable_open() and, redundantly, set file_operations.llseek to no_llseek to remove any doubt whether the BKL-grabbing default_llseek handler is used. (Also shuffle file_operations initialization according to the order of handler definitions.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: ohci: cleanups and fix for nonstandard build without debug facilityStefan Richter
1) Clean up two function names: The ohci_ prefix is only used in names of fw_card_driver hooks. There were two unnecessary exceptions. 2) Replace empty macros by empty inline functions so that call parameter type checking is available in #ifndef'd builds. 3) CONFIG_FIREWIRE_OHCI_DEBUG is currently a hidden kconfig variable, hence is not going to be switched off by anybody. Still, it can be switched off but then compilation will fail in ohci_enable() at the expression param_debug & OHCI_PARAM_DEBUG_BUSRESETS. Add the necessary definitions in the nonstandard case. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: ohci: wait for PHY register accesses to completeStefan Richter
Rather than having the arbitrary msleep(2) pause, let read_phy_reg() loop until the link--phy access was finished. Factor write_phy_reg() out of ohci_update_phy_reg() and of read_paged_phy_reg() and let it loop too until the link--phy access was finished. Like in the older ohci1394 driver, a timeout of 100 milliseconds is chosen. Unlike the old driver, we sleep instead of busy-wait in each waiting loop iteration. Instead of a loop, the waiting could probably also be implemented interrupt driven, but why bother. It would require up and running interrupt handling before the link was fully configured and enabled. Also modify functions a bit: Error return and value return can be combined in read_phy_reg() since the domain of values is only u8. Likewise in read_paged_phy_reg(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: ohci: fix up configuration of TI chipsClemens Ladisch
On TI chips (OHCI-Lynx and later), enable link enhancements features that TI recommends to be used. None of these are required for proper operation, but they are safe and nice to have. In theory, these bits should have been set by default, but in practice, some BIOS/EEPROM writers apparently do not read the datasheet, or get spooked by names like "unfair". Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: ohci: enable 1394a enhancementsClemens Ladisch
The OHCI spec says that, if the programPhyEnable bit is set, the driver is responsible for configuring the IEEE1394a enhancements within the PHY and the link consistently. So do this. Also add a quirk to allow disabling these enhancements; this is needed for the TSB12LV22 where ack accelerations are buggy (erratum b). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: ohci: do not clear PHY interrupt status inadvertentlyClemens Ladisch
The interrupt status bits in PHY register 5 are cleared by writing a one bit. To avoid clearing them unadvertently, do not write them back when they were read as set, but only when they have been explicitly requested to be set. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: ohci: add a function for reading PHY registersClemens Ladisch
Move the register reading code from ohci_update_phy_reg() into a function which can be used separately. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: cdev: fix information leakStefan Richter
A userspace client got to see uninitialized stack-allocated memory if it specified an _IOC_READ type of ioctl and an argument size larger than expected by firewire-core's ioctl handlers (but not larger than the core's union ioctl_arg). Fix this by clearing the requested buffer size to zero, but only at _IOR ioctls. This way, there is almost no runtime penalty to legitimate ioctls. The only legitimate _IOR is FW_CDEV_IOC_GET_CYCLE_TIMER with 12 or 16 bytes to memset. [Another way to fix this would be strict checking of argument size (and possibly direction) vs. command number. However, we then need a lookup table, and we need to allow for slight size deviations in case of 32bit userland on 64bit kernel.] Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: cdev: require quadlet-aligned headers for transmit packetsClemens Ladisch
The definition of struct fw_cdev_iso_packet seems to imply that the header_length must be quadlet-aligned, and in fact, specifying an unaligned header has never really worked when using multiple packet structures, because the position of the next control word is computed by rounding the header_length _down_, so the last one to three bytes of the header would overlap the next control word. To avoid this problem, check that the header length is properly aligned. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-04-10firewire: cdev: disallow receive packets without headerClemens Ladisch
In receive contexts, reject packets with header_length==0. This would be an instruction to queue zero packets which would not make sense. This prevents a division by zero in the OHCI driver. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: align driver match with modalias firewire: core: fix Model_ID in modalias firewire: ohci: add cycle timer quirk for the TI TSB12LV22 firewire: core: fw_iso_resource_manage: fix error handling
2010-03-24firewire: core: align driver match with modaliasStefan Richter
The driver match strategy was: - Match vendor/model/specifier/version of the unit directory. - If that was a miss, match vendor from the root directory and model/specifier/version of the unit directory. This was inconsistent with how the modalias string was constructed until recently (take vendor/model from root directory and specifier/ version from unit directory). It was also inconsistent with how it is done since the parent commit: - Use vendor/model/specifier/version of the unit directory if possible, - fall back to one or more of vendor/model/specifier/version from the root directory depending on which ones are not present at the unit directory. Fix this inconsistency by sharing the ROM scanner function between modalias printer function and driver match function. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-24firewire: core: fix Model_ID in modaliasStefan Richter
The modalias string of devices that represent units on a FireWire node did not show Module_ID entries within unit directories. This was because firewire-core searched only the root directory of the configuration ROM for a Model_ID entry. We now search first the root directory, then the unit directory. IOW honor a unit directory's Model_ID if present, otherwise fall back to the root directory's model ID (if present). Furthermore, apply the same change to Vendor_ID. This had the same issue but it was less apparent because most devices provide Vendor_ID only in the root directory. And finally, also use this strategy for the remaining two IDs in the modalias, Specifier_ID and Version. It does not actually make sense to look for them elsewhere than in the unit directory because they are mandatory there. However, a uniform search order simplifies the implementation and has no adverse affect in practice. Side notes: - The older counterpart of this, nodemgr.c of ieee1394, looked for Vendor_ID first in the root directory, then in the unit directory, and for Model_ID only in the unit directory. - There is a single mainline driver which requires Vendor_ID and Model_ID --- the firedtv driver. This one worked because FireDTVs provide Vendor_ID in the root directory and Model_ID identically in root directory and unit directory. - Apart from firedtv, there are currently no drivers known to me (including userspace drivers) that look at the Vendor_ID or Model_ID of the modalias. Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-17firewire: ohci: add cycle timer quirk for the TI TSB12LV22Clemens Ladisch
Among the many entries in the TSB12LV22 errata list (TI literature number SLLS312) is the following: PCI Slave reads of the Cycle Timer register may occasionally get an incorrect value. Software may be able to validate value by reading the register multiple times rapidly and evaluating for a reasonable difference. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> (untested) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added #define)
2010-03-16Fix typos in commentsThomas Weber
[Ss]ytem => [Ss]ystem udpate => update paramters => parameters orginal => original Signed-off-by: Thomas Weber <swirl@gmx.li> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15firewire: core: fw_iso_resource_manage: fix error handlingClemens Ladisch
If the bandwidth allocation fails, the error must be returned in *channel regardless of whether the channel allocation succeeded. Checking for c >= 0 is not correct if no channel allocation was requested, in which case this part of the code is reached with c == -EINVAL. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-08Driver core: create lock/unlock functions for struct deviceGreg Kroah-Hartman
In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits) firewire: ohci: extend initialization log message firewire: ohci: fix IR/IT context mask mixup firewire: ohci: add module parameter to activate quirk fixes firewire: ohci: use an ID table for quirks detection firewire: ohci: reorder struct fw_ohci for better cache efficiency firewire: ohci: remove unused dualbuffer IR code firewire: core: combine a bit of repeated code firewire: core: change type of a data buffer firewire: cdev: increment ABI version number firewire: cdev: add more flexible cycle timer ioctl firewire: core: rename an internal function firewire: core: fix an information leak firewire: core: increase stack size of config ROM reader firewire: core: don't fail device creation in case of too large config ROM blocks firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500 firewire: remove incomplete Bus_Time CSR support firewire: get_cycle_timer optimization and cleanup firewire: ohci: enable cycle timer fix on ALi and NEC controllers firewire: ohci: work around cycle timer bugs on VIA controllers firewire: make PCI device id constant ...
2010-02-26block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-24firewire: ohci: extend initialization log messageStefan Richter
by the number of available isochronous DMA contexts and active quirks which is occasionally useful information. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: fix IR/IT context mask mixupStefan Richter
This bug was present in firewire-ohci since day one: The number of available isochronous receive DMA contexts was mixed up with that of available isochronous transmit DMA contexts. This is harmless on a few chips which offer the same number of contexts in both directions, but most chips nowadays implement only the standard minimum of 4 IR contexts, but 8 IT contexts. If a user attempted to run a lot of IR contexts at once, results with more than four were therefore unpredictable. I suppose the controller would simply refuse to start DMA of any unimplemented context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: add module parameter to activate quirk fixesStefan Richter
This way, we can advise users of precompiled kernel packages to test existing quirk fixes on chips which have not been listed yet, without them having to build a kernel from source. Note, to use this feature on a machine with more than one controller, steps like these are necessary: # lspci | grep 1394 # ls /sys/bus/pci/drivers/firewire_ohci/ # echo -n "0000:03:02.0" > /sys/bus/pci/drivers/firewire_ohci/unbind # echo 2 > /sys/module/firewire_ohci/parameters/quirks # echo -n "0000:03:02.0" > /sys/bus/pci/drivers/firewire_ohci/bind # echo 0 > /sys/module/firewire_ohci/parameters/quirks The parameter can also be used to switch off quirk flags that were hardwired into firewire-ohci's quirks table. Simply specify a non-zero quirks value but without any known flags, e.g. 0x100. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: use an ID table for quirks detectionStefan Richter
We don't have a lot of quirks to take into account (especially since dual-buffer IR is out of the picture), but still, a table-based approach is more organized than a series of if () clauses. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: reorder struct fw_ohci for better cache efficiencyStefan Richter
The config_rom struct members are only accessed during relatively infrequent self-ID-complete interrupts and only if the local config ROM was changed, while the ar_, at_, ir_, it_ members are used very frequently during I/O. Hence move the config_rom members further down. More importantly, make the huge self_id_buffer member the last one; this is only accessed in self-ID-complete interrupts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: remove unused dualbuffer IR codeStefan Richter
This code was no longer used since 2.6.33, "firewire: ohci: always use packet-per-buffer mode for isochronous reception" commit 090699c0. If anybody needs this code in the future for special purposes, it can be brought back in. But it must not be re-enabled by default; drivers (kernelspace or userspace drivers) should only get this mode if they explicitly request it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: combine a bit of repeated codeStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: change type of a data bufferStefan Richter
from array of char to union of structs. I already used a union to size the buffer which holds ioctl arguments; more consequent is to define it as an instance of this union in the first place. Also rename several local variables from "request" to "a"(rgument) since the term request can be mistaken to mean a transaction subaction, e.g. an instance of struct fw_request. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: cdev: add more flexible cycle timer ioctlStefan Richter
The system time from CLOCK_REALTIME is not monotonic, hence problematic for the main user of the FW_CDEV_IOC_GET_CYCLE_TIMER ioctl. This issue exists in its successor ABI, i.e. raw1394, too. http://subversion.ffado.org/ticket/242 We now offer an alternative ioctl which lets the caller choose between CLOCK_REALTIME, CLOCK_MONOTONIC, and CLOCK_MONOTONIC_RAW as source of the local time, very similar to the clock_gettime libc function. The format of the local time return value matches that of clock_gettime (seconds and nanoseconds, instead of a single microseconds value from the existing ioctl). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: rename an internal functionStefan Richter
according to what it really does. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: fix an information leakStefan Richter
If a device exposes a sparsely populated configuration ROM, firewire-core's sysfs interface and character device file interface showed random data in the gaps between config ROM blocks. Fix this by zero-initialization of the config ROM reader's scratch buffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: increase stack size of config ROM readerStefan Richter
The stack size of 16 was artificially chosen and may be too small in extreme cases. A device won't be accessible then. Since it doesn't really matter to the slab allocator whether we ask for 1088 bytes or 2048 bytes of scratch memory, just allocate 2048 bytes for the sum of temporary config ROM image and stack, and we will never ever overflow the stack (because there simply can't be more stack items than ROM entries). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: don't fail device creation in case of too large config ROM ↵Stefan Richter
blocks It never happened yet, but better safe than sorry: If a device's config ROM contains a block which overlaps the boundary at 0xfffff00007ff, just ignore that one block instead of refusing to add the device representation. That way, upper layers (kernelspace or userspace drivers) might still be able to use the device to some degree. That's better than total inaccessibility of the device. Worse, the core would have logged only a generic "giving up on config rom" message which could only be debugged by feeding a firewire-ohci debug logging session through a config ROM interpreter, IOW would likely remain undiagnosed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500Stefan Richter
The Panasonic AG-DV2500 tape deck contains an invalid entry in its configuration ROM root directory: A leaf pointer with the undefined key ID 0 and an offset that points way out of the standard config ROM area. This caused firewire-core to dismiss the device with the generic log message "giving up on config rom for node id...", after which it was of course impossible to access the tape deck with dvgrab or any other program. https://bugzilla.redhat.com/show_bug.cgi?id=449252#c29 The fix is to simply ignore this invalid ROM entry and proceed to read the valid rest of the ROM. There is a catch though: When the kernel later iterates over the ROM, it would be nasty having to check again for such too large ROM offsets. Therefore we manipulate the defective or unsupported ROM entry to become a harmless immediate entry that won't have any side effects later (an entry with the value 0x00000000). Reported-by: George Chriss Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24Merge tag 'v2.6.33' for its firewire changes since last branch pointStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-20firewire: remove incomplete Bus_Time CSR supportStefan Richter
The current implementation of Bus_Time read access was buggy since it did not ensure that Bus_Time.second_count_hi and second_count_lo came from the same 128 seconds period. Reported-by: Håkan Johansson <f96hajo@chalmers.se> Instead of a fix, remove Bus_Time register support altogether. The spec requires all cycle master capable nodes to implement this (all Linux nodes are cycle master capable) while it also says that it "may" be initialized by the bus manager or by the IRM standing in for a bus manager. (Neither Linux' firewire-core nor ieee1394 nodemgr implement this.) Since we cannot rely on Bus_Time having been initialized by a bus manager, it is better to return an error instead of a nonsensical value on a read request to Bus_Time. Alternatively, we could fix the Bus_Time read integrity bug _and_ implement (a) cycle master's write support of the register as well as (b) bus manager's Bus_Time initialization service, i.e. preservation of the Bus_Time when the cycle master node of a bus changes. However, that would be quite some code for a feature that is unreliable to begin with and very likely unused in practice. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>