summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-mpc8xxx.c
AgeCommit message (Collapse)Author
2013-12-03powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536Liu Gang
For MPC8572/MPC8536, the status of GPIOs defined as output cannot be determined by reading GPDAT register, so the code use shadow data register instead. But the code may give the wrong status of GPIOs defined as input under some scenarios: 1. If some pins were configured as inputs and were asserted high before booting the kernel, the shadow data has been initialized with those pin values. 2. Some pins have been configured as output first and have been set to the high value, then reconfigured as input. The above cases will make the shadow data for those input pins to be set to high. Then reading the pin status will always return high even if the actual pin status is low. The code should eliminate the effects of the shadow data to the input pins, and the status of those pins should be read directly from GPDAT. Cc: stable@vger.kernel.org Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-10-16gpio: mpc8xxx: drop references to "virtual" IRQLinus Walleij
Rename the argument "virq" to just "irq", this IRQ isn't any more "virtual" than any other Linux IRQ number, we use "hwirq" for the actual hw-numbers, "virq" is just bogus. Cc: Anatolij Gustschin <agust@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10drivers: clean-up prom.h implicit includesRob Herring
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-02-04gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mappingAnatolij Gustschin
Exporting gpios over sysfs GPIO interface throws genirq error messages, i.e. on an mpc5121 based board exporting GPIO 5 triggers it: # echo 229 > /sys/class/gpio/export genirq: Setting trigger mode 0 for irq 44 failed (mpc512x_irq_set_type+0x0/0x18c) Similar error messages appear in the kernel boot log since the board specifies GPIOs for matrix keypad and also SD Card write protect and card detect GPIOs in its device tree. For all these GPIOs there is an error message in the log. The issue is triggered by setting the irq type to IRQ_TYPE_NONE in the driver's irq_domain map function mpc8xxx_gpio_irq_map(). ... mpc8xxx_gpio_irq_map irq_set_irq_type __irq_set_trigger __irq_set_trigger() calls irq_set_type() callback of the mpc8xxx gpio irq chip with the IRQ_TYPE_NONE in its 'flags' argument. This callback is either mpc8xxx_irq_set_type() or mpc512x_irq_set_type(). Both these functions return -EINVAL in the case if IRQ_TYPE_NONE is passed in the flow_type argument. This return value triggers the observed error message in __irq_set_trigger(). Modifying these callbacks to not return an error in IRQ_TYPE_NONE case doesn't make any sense to me. The line setting IRQ_TYPE_NONE type has been originally added by commit 345e5c8a "powerpc: Add interrupt support to mpc8xxx_gpio". At this time set_irq_type() checked its type argument and returned 0 if the type argument didn't specify any meaningful type in its type sense bits (and thus was equal to IRQ_TYPE_NONE). Effectively this line was a nop and I wonder what was the point of adding it. Remove IRQ_TYPE_NONE setting in the irq_domain mapping function. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-11gpio/mpc8xxx: add a const qualifierUwe Kleine-König
This prepares *of_device_id.data becoming const. Without this change the following warning would occur: drivers/gpio/gpio-mpc8xxx.c: In function 'mpc8xxx_add_controller': drivers/gpio/gpio-mpc8xxx.c:360:30: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-05-18gpio: mpc8xxx: Prevent NULL pointer deref in demux handlerThomas Gleixner
commit cfadd838(powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver) added an unconditional call of chip->irq_eoi() to the demux handler. This leads to a NULL pointer derefernce on MPC512x platforms which use this driver as well. Make it conditional. Reported-by: Thomas Wucher <thwucher@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Felix Radensky <felix@embedded-sol.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: stable@vger.kernel.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-16irq_domain/powerpc: Replace custom xlate functions with library functionsGrant Likely
This patch converts a number of the powerpc drivers to use the common library of irq_domain xlate functions, dropping a bunch of lines in the process. v5: - Remove tsi108 changes from patch Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-16irq_domain: Replace irq_alloc_host() with revmap-specific initializersGrant Likely
Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-14irq_domain/powerpc: Use common irq_domain structure instead of irq_hostGrant Likely
This patch drops the powerpc-specific irq_host structures and uses the common irq_domain strucutres defined in linux/irqdomain.h. It also fixes all the users to use the new structure names. Renaming irq_host to irq_domain has been discussed for a long time, and this patch is a step in the process of generalizing the powerpc virq code to be usable by all architecture. An astute reader will notice that this patch actually removes the irq_host structure instead of renaming it. This is because the irq_domain structure already exists in include/linux/irqdomain.h and has the needed data members. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2011-12-13gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121Wolfram Sang
Add a 5121-custom reject if an input-only pin is requested to be output (see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to consume less lines which scales better. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> [grant.likely: Fixed build error] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-03powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driverFelix Radensky
Interrupt handler in MPC8xxx GPIO driver is missing the call to PIC EOI (end of interrupt) handler. As a result, at least on 85XX systems, GPIO interrupt is delivered only once. This patch adds the missing EOI call. Tested on custom P1022 board. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-03powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driverKumar Gala
Support MPC85xx platforms outside of MPC8572/MPC8536. The MPC8572/MPC8536 have an erratum that is worked around based on having "fsl,mpc8572-gpio" in the compatiable list. All other MPC85xx SoCs don't require this workaround and thus utilize the 'fsl,pq3-gpio' compatiable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-22gpio: move mpc8xxx/512x gpio driver to drivers/gpioWolfram Sang
Move the driver to the place where it is expected to be nowadays. Also rename its CONFIG-name to match the rest and adapt the defconfigs. Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to the platforms, because this option is per-platform and not per-driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de>