summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-pcf857x.c
AgeCommit message (Collapse)Author
2014-07-22gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pcf857x: Add IRQF_SHARED when request irqGeorge Cherian
It's quite possible that multiple pcf857x can be hooked up to the same interrupt line with the processor. So add IRQF_SHARED in request irq.. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pcf857x: Avoid calling irq_domain_cleanup twiceGeorge Cherian
Currently irq_domain_cleanup is called twice if irq_domain_init fails. This causes the following crash. Unable to handle kernel paging request at virtual address 00100104 pgd = c0004000 [00100104] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.12.15-01889-gedd10a8-dirty #4 Workqueue: deferwq deferred_probe_work_func task: ed0ee800 ti: ed116000 task.ti: ed116000 PC is at irq_domain_remove+0x3c/0x8c LR is at 0x0 pc : [<c0089734>] lr : [<00000000>] psr: a0000013 sp : ed117b50 ip : 00100100 fp : ed117b64 r10: ed5d1a04 r9 : 00000008 r8 : 00000000 r7 : ffffffea r6 : ed5d1a20 r5 : ed5d1a00 r4 : ed5e7540 r3 : 00200200 r2 : 00100100 r1 : c08aa180 r0 : 00200200 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 8000406a DAC: 00000017 Process kworker/u4:0 (pid: 6, stack limit = 0xed116248) Stack: (0xed117b50 to 0xed118000) 7b40: 0000016b ed5d5f10 ed117b74 ed117b68 7b60: c02c8910 c0089704 ed117bb4 ed117b78 c02c8e14 c02c8900 ed5d1a04 ed5d4e80 ... <snip> ... fe0: 00000000 00000000 00000000 00000000 00000013 00000000 384a13ea 1590210a Backtrace: [<c00896f8>] (irq_domain_remove+0x0/0x8c) from [<c02c8910>] (pcf857x_irq_domain_cleanup+0x1c/0x20) r4:ed5d5f10 r3:0000016b [<c02c88f4>] (pcf857x_irq_domain_cleanup+0x0/0x20) from [<c02c8e14>] (pcf857x_probe+0x2a8/0x364) [<c02c8b6c>] (pcf857x_probe+0x0/0x364) from [<c04787ac>] (i2c_device_probe+0x80/0xc0) [<c047872c>] (i2c_device_probe+0x0/0xc0) from [<c036c33c>] (driver_probe_device+0x104/0x240) r6:00000000 r5:ed5d1a20 r4:c08c709c r3:c047872c [<c036c238>] (driver_probe_device+0x0/0x240) from [<c036c558>] (__device_attach+0x48/0x4c) r7:ed4fc480 r6:c036c510 r5:ed5d1a20 r4:c0866bb8 [<c036c510>] (__device_attach+0x0/0x4c) from [<c036a6d8>] (bus_for_each_drv+0x4c/0x94) r5:ed5d1a20 r4:00000000 [<c036a68c>] (bus_for_each_drv+0x0/0x94) from [<c036c1f4>] (device_attach+0x78/0x90) r6:c087fe50 r5:ed5d1a54 r4:ed5d1a20 [<c036c17c>] (device_attach+0x0/0x90) from [<c036b76c>] (bus_probe_device+0x8c/0xb4) r6:c087fe50 r5:ed5d1a20 r4:ed5d1a20 r3:ed17e1c0 [<c036b6e0>] (bus_probe_device+0x0/0xb4) from [<c0369888>] (device_add+0x34c/0x624) r6:ed5d1a28 r5:00000000 r4:ed5d1a20 r3:fffffffe [<c036953c>] (device_add+0x0/0x624) from [<c0369b7c>] (device_register+0x1c/0x20) ... <snip> ... [<c0060844>] (process_one_work+0x0/0x37c) from [<c0061040>] (worker_thread+0x13c/0x3c4) [<c0060f04>] (worker_thread+0x0/0x3c4) from [<c00670ec>] (kthread+0xac/0xb8) [<c0067040>] (kthread+0x0/0xb8) from [<c00148b8>] (ret_from_fork+0x14/0x3c) r7:00000000 r6:00000000 r5:c0067040 r4:ed105d20 Code: e59fc04c e591e000 e59f0048 e154000e (e5823004) ---[ end trace 59dd1e90032c4217 ]--- Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij
This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-23gpio: pcf857x: Add OF supportLaurent Pinchart
Add DT bindings for the pcf857x-compatible chips and parse the device tree node in the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-18gpio: pcf857x: only use set_irq_flags() on ARMLinus Walleij
As per the pattern from other GPIO drivers, use set_irq_flags() on ARM only, use irq_set_noprobe() on other archs. Also rename the argument "virq" to just "irq", this IRQ isn't any more "virtual" than any other Linux IRQ number, we use "hwirq" for the actual hw-numbers, "virq" is just bogus. Cc: George Cherian <george.cherian@ti.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17gpio: pcf857x: call the gpio user handler iff gpio_to_irq is doneGeorge Cherian
For pcf857x driver if the initial state is not set properly (proper n_latch is not passed), we get bad irq prints on console. We get this only for the first interrupt and doesnot repeat for further interrupts unles and until there are other gpio pins which are not flipping continously. following prints are seen on console. [ 40.983924] irq 0, desc: ce004080, depth: 1, count: 0, unhandled: 0 [ 40.990511] ->handle_irq(): c00aa538, handle_bad_irq+0x0/0x260 [ 40.996768] ->irq_data.chip(): c080b6ec, no_irq_chip+0x0/0x60 [ 41.002842] ->action(): (null) [ 41.006242] IRQ_NOPROBE set [ 41.009465] IRQ_NOREQUEST set Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17gpio: pcf857x: remove the irq_demux_work and gpio->irqGeorge Cherian
Now that we are using devm_request_threaded_irq no need for irq_demux_work and gpio->irq. Remove all its references. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17gpio: pcf857x: change to devm_request_threaded_irqGeorge Cherian
Remove the request_irq and use devm_request_threaded_irq also cleanup free_irq. devm_* takes care of that. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init()Laurent Pinchart
The argument is not used, remove it. No board registers a pcf857x device with an IRQ without specifying platform data, IRQ domain registration behaviour is thus not affected by this change. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23gpio: pcf857x: Sort headers alphabeticallyLaurent Pinchart
This makes checking for duplicates when adding a new #include easier. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16gpio: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27gpio: pcf857x: use devm_kzalloc()Jingoo Han
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27Add TI TCA9554 to supported devices tableNikolay Balandin
Signed-off-by: Nikolay Balandin <nbalandin@dev.rtsoft.ru> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-07gpio: pcf857x: use client->irq for gpio_to_irq()Kuninori Morimoto
6e20a0a429bd4dc07d6de16d9c247270e04e4aa0 (gpio: pcf857x: enable gpio_to_irq() support) added gpio_to_irq() support on pcf857x driver, but it used pdata->irq. This patch modifies driver to use client->irq instead of it. It modifies kzm9g board platform settings, and device probe information too. This patch is tested on kzm9g board Reported-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-12gpio: pcf857x: fixup smatch WARNINGKuninori Morimoto
6e20a0a429bd4dc07d6de16d9c247270e04e4aa0 (gpio: pcf857x: enable gpio_to_irq() support) added new smatch warnings drivers/gpio/gpio-pcf857x.c:288 pcf857x_probe() error: we previously \ assumed 'pdata' could be null (see line 277) drivers/gpio/gpio-pcf857x.c:364 pcf857x_probe() warn: variable dereferenced\ before check 'pdata' (see line 292) drivers/gpio/gpio-pcf857x.c:421 pcf857x_remove() error: we previously\ assumed 'pdata' could be null (see line 410) This patch fixes it Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-23gpio: pcf857x: enable gpio_to_irq() supportKuninori Morimoto
pcf857x chip has some pins, but interrupt pin is only 1 pin. And gpiolib requests 1 interrupt per 1 gpio pin. Thus, this patch added demuxed irq to pcf857x driver, and enabled gpio_to_irq(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12gpio: pcf857x: share 8/16 bit access functionsKuninori Morimoto
This patch adds 8/16 bit write/read functions, and shared gpio input/output/set/get functions. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-12gpiolib: output basic details and consolidate gpio device driversGrant Likely
This patch adds a kernel message, containing GPIO range and device name on successful device registration, and removes duplicate messages from the following drivers: * gpio-adp5588 * gpio-bt8xx * gpio-cs5535 * gpio-janz-ttl * gpio-nomadik * gpio-pcf857x * gpio-xilinx * drivers/of/gpio.c Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> [grant.likely@secretlab.ca: squashed 2 patches together] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31drivers/gpio: Fix drivers who are implicit users of module.hPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in gpio are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-06gpio: reorganize driversGrant Likely
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v0.10.2 at 2024-11-17 02:22:45 (GMT)