summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2015-07-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Misc irq fixes: - two driver fixes - a Xen regression fix - a nested irq thread crash fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3-its: Fix mapping of LPIs to collections genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now gpio/davinci: Fix race in installing chained irq handler
2015-07-16gpio: pca953x: fix nested irqs reschedulingGrygorii Strashko
pca953x interrupt controller functionality is implemented using nested threaded IRQs which require parent_irq to be configured properly otherwise below warning can be seen if IRQ core will try re-schedule nested IRQ: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 12 at kernel/irq/manage.c:696 irq_nested_primary_handler+0x30/0x38() Primary handler called for nested irq 301 Modules linked in: uinput ipv6 smsc95xx usbnet mii imx2_wdt etnaviv(C) matrix_keypad matrix_keymap ar1021_i2c CPU: 1 PID: 12 Comm: ksoftirqd/1 Tainted: G WC 4.1.1 #9 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013298>] (dump_backtrace) from [<c0013488>] (show_stack+0x20/0x24) [<c0013468>] (show_stack) from [<c05743c4>] (dump_stack+0x70/0xc0) [<c0574354>] (dump_stack) from [<c002b7b8>] (warn_slowpath_common+0x88/0xc0) [<c002b730>] (warn_slowpath_common) from [<c002b8ac>] (warn_slowpath_fmt+0x40/0x48) [<c002b870>] (warn_slowpath_fmt) from [<c0075798>] (irq_nested_primary_handler+0x30/0x38) [<c0075768>] (irq_nested_primary_handler) from [<c0075200>] (handle_irq_event_percpu+0x70/0x2d0) [<c0075190>] (handle_irq_event_percpu) from [<c00754ac>] (handle_irq_event+0x4c/0x6c) [<c0075460>] (handle_irq_event) from [<c0078204>] (handle_simple_irq+0xa4/0xc8) [<c0078160>] (handle_simple_irq) from [<c0077cd4>] (resend_irqs+0x50/0x7c) [<c0077c84>] (resend_irqs) from [<c002f99c>] (tasklet_action+0x94/0x140) [<c002f908>] (tasklet_action) from [<c002eea8>] (__do_softirq+0xa0/0x3c8) [<c002ee08>] (__do_softirq) from [<c002f208>] (run_ksoftirqd+0x38/0x54) [<c002f1d0>] (run_ksoftirqd) from [<c004b1e4>] (smpboot_thread_fn+0x1f8/0x2f0) [<c004afec>] (smpboot_thread_fn) from [<c0047744>] (kthread+0xe8/0x104) [<c004765c>] (kthread) from [<c000fac8>] (ret_from_fork+0x14/0x2c) ---[ end trace 96052cda48865769 ]--- The issue was reported and described in details by Lothar Waßmann and Christian Gmeiner in https://lkml.org/lkml/2014/9/9/123. Fix it by adding missed call of gpiochip_set_chained_irqchip() so GPIO IRQ chip helpers will set parent_irq for nested IRQs properly. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: omap: prevent module from being unloaded while in useGrygorii Strashko
OMAP GPIO driver allowed to be built as loadable module, but it doesn't set owner field in GPIO chip structure. As result, module_get/put() API is not working and it's possible to unload OMAP driver while in use: omap_gpio 48051000.gpio: REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED Hence, add missing configuration. Cc: Tony Lindgren <tony@atomide.com> Fixes: cac089f9026e ('gpio: omap: Allow building as a loadable module') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: max732x: Add missing dev reference to gpiochipMarek Vasut
In case the gpiochip doesn't have the .dev field set, as is the case in here, it is not possible to reference this device in DT as a GPIO controller. A good example of this problem is that gpio-leds can not be used when connected to this chip, the gpio-leds driver bails out with -EPROBE_DEFER. Fix this problem by setting the .dev field of the gpio_chip to the parent i2c device. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mans Rullgard <mans@mansr.com> Cc: Olaf Mandel <o.mandel@menlosystems.com> Cc: Semen Protsenko <semen.protsenko@globallogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio/xilinx: Use correct address when setting initial values.Raphaël Teysseyre
xgpio_save_regs() is used in this driver to setup the initial values of the registers in the hardware. The relevant registers at that time are: 0x0 -> channel 0 data (32 bits, one for each GPIO on this channel). 0x4 -> channel 0 tri, controls in/out status for each GPIO of this channel. 0x8 -> channel 1 data 0xC -> channel 1 tri gpio-xilinx.c defines these: XGPIO_DATA_OFFSET (0x0) XGPIO_TRI_OFFSET (0x4) XGPIO_CHANNEL_OFFSET 0x8 Before this patch, the "data" register value of channel 1 was written at 0x4 intead of 0x8 (overwriting the channel 0 "tri" register), and the "tri" register value for channel 1 was written at 0x8 instead of 0xC. Signed-off-by: Raphaël Teysseyre <rteysseyre@gmail.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: zynq: Fix problem with unbalanced pm_runtime_enableMichal Simek
Add missing pm_runtime_disabled to remove(). Error log: root@zynqmp:~# modprobe gpio_zynq root@zynqmp:~# lsmod Not tainted gpio_zynq 7086 0 - Live 0xffffffbffc00a000 root@zynqmp:~# rmmod gpio_zynq root@zynqmp:~# lsmod Not tainted root@zynqmp:~# modprobe gpio_zynq [ 246.924438] zynq-gpio ff0a0000.gpio: Unbalanced pm_runtime_enable! root@zynqmp:~# rmmod gpio_zynq root@zynqmp:~# lsmod Not tainted Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: omap: add missed spin_unlock_irqrestore in omap_gpio_irq_typeGrygorii Strashko
Add missed spin_unlock_irqrestore in omap_gpio_irq_type when omap_set_gpio_triggering() is failed. It fixes static checker warning: drivers/gpio/gpio-omap.c:523 omap_gpio_irq_type() warn: inconsistent returns 'spin_lock:&bank->lock'. This fixes commit: 1562e4618ded ('gpio: omap: fix error handling in omap_gpio_irq_type') Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-15gpio: brcmstb: fix null ptr dereference in driver removeGregory Fong
If a failure occurs during probe, brcmstb_gpio_remove() is called. In remove, we call platform_get_drvdata(), but at the time of failure in the probe the driver data hadn't yet been set which leads to a NULL ptr dereference in the remove's list_for_each. Call platform_set_drvdata() and set up list head right after allocating the priv struct to both avoid the null pointer dereference that could occur today. To guard against potential future changes, check for null pointer in remove. Reported-by: Tim Ross <tross@broadcom.com> Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-13gpio/davinci: Fix race in installing chained irq handlerThomas Gleixner
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com>
2015-07-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
2015-07-01Merge tag 'pm+acpi-4.2-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes that didn't make it to the previous PM+ACPI pull request or are fixing issues introduced by it. Specifics: - Fix a recently added memory leak in an error path in the ACPI resources management code (Dan Carpenter) - Fix a build warning triggered by an ACPI video header function that should be static inline (Borislav Petkov) - Change names of helper function converting struct fwnode_handle pointers to either struct device_node or struct acpi_device pointers so they don't conflict with local variable names (Alexander Sverdlin) - Make the hibernate core re-enable nonboot CPUs on failures to disable them as expected (Vitaly Kuznetsov) - Increase the default timeout of the device suspend watchdog to prevent it from triggering too early on some systems (Takashi Iwai) - Prevent the cpuidle powernv driver from registering idle states with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT is unset which leads to boot hangs (Preeti U Murthy)" * tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() ACPI / video: Inline acpi_video_set_dmi_backlight_type ACPI / resources: free memory on error in add_region_before()
2015-06-26Merge branches 'acpi-video', 'device-properties', 'pm-sleep' and 'pm-cpuidle'Rafael J. Wysocki
* acpi-video: ACPI / video: Inline acpi_video_set_dmi_backlight_type * device-properties: ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() * pm-sleep: PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure * pm-cpuidle: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
2015-06-25gpio/msic: Fix race in installing chained IRQ handlerThomas Gleixner
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2015-06-25gpio/dwapb: Fix race in installing chained IRQ handlerThomas Gleixner
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org
2015-06-25gpio/bcm-kona: Fix race in installing chained IRQ handlerThomas Gleixner
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Ray Jui <rjui@broadcom.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-gpio@vger.kernel.org
2015-06-25Merge tag 'pinctrl-v4.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Here is the bulk of pin control changes for the v4.2 series: Quite a lot of new SoC subdrivers and two new main drivers this time, apart from that business as usual. Details: Core functionality: - Enable exclusive pin ownership: it is possible to flag a pin controller so that GPIO and other functions cannot use a single pin simultaneously. New drivers: - NXP LPC18xx System Control Unit pin controller - Imagination Pistachio SoC pin controller New subdrivers: - Freescale i.MX7d SoC - Intel Sunrisepoint-H PCH - Renesas PFC R8A7793 - Renesas PFC R8A7794 - Mediatek MT6397, MT8127 - SiRF Atlas 7 - Allwinner A33 - Qualcomm MSM8660 - Marvell Armada 395 - Rockchip RK3368 Cleanups: - A big cleanup of the Marvell MVEBU driver rectifying it to correspond to reality - Drop platform device probing from the SH PFC driver, we are now a DT only shop for SuperH - Drop obsolte multi-platform check for SH PFC - Various janitorial: constification, grammar etc Improvements: - The AT91 GPIO portions now supports the set_multiple() feature - Split out SPI pins on the Xilinx Zynq - Support DTs without specific function nodes in the i.MX driver" * tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: rockchip: add support for the rk3368 pinctrl: rockchip: generalize perpin driver-strength setting pinctrl: sh-pfc: r8a7794: add SDHI pin groups pinctrl: sh-pfc: r8a7794: add MMCIF pin groups pinctrl: sh-pfc: add R8A7794 PFC support pinctrl: make pinctrl_register() return proper error code pinctrl: mvebu: armada-39x: add support for Armada 395 variant pinctrl: mvebu: armada-39x: add missing SATA functions pinctrl: mvebu: armada-39x: add missing PCIe functions pinctrl: mvebu: armada-38x: add ptp functions pinctrl: mvebu: armada-38x: add ua1 functions pinctrl: mvebu: armada-38x: add nand functions pinctrl: mvebu: armada-38x: add sata functions pinctrl: mvebu: armada-xp: add dram functions pinctrl: mvebu: armada-xp: add nand rb function pinctrl: mvebu: armada-xp: add spi1 function pinctrl: mvebu: armada-39x: normalize ref clock naming pinctrl: mvebu: armada-xp: rename spi to spi0 pinctrl: mvebu: armada-370: align spi1 clock pin naming pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet ...
2015-06-24ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()Alexander Sverdlin
Commit 8a0662d9 introduced of_node and acpi_node symbols in global namespace but there were already ~63 of_node local variables or function parameters (no single acpi_node though, but anyway). After debugging undefined but used of_node local varible (which turned out to reference static function of_node() instead) it became clear that the names for the functions are too short and too generic for global scope. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-23Merge tag 'gpio-v4.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio updates from Linus Walleij: "This is the big bulk of GPIO changes queued for the v4.2 kernel series: - a big set of cleanups to the aged sysfs interface from Johan Hovold. To get these in, v4.1-rc3 was merged into the tree as the first patch in that series had to go into stable. This makes the locking much more fine-grained (get rid of the "big GPIO lock(s)" and store states in the GPIO descriptors. - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to avoid confusions. - New drivers for: * NXP LPC18xx (currently LPC1850) * NetLogic XLP * Broadcom STB SoC's * Axis ETRAXFS * Zynq Ultrascale+ (subdriver) - ACPI: * make it possible to retrieve GpioInt resources from a GPIO device using acpi_dev_gpio_irq_get() * merge some dependent I2C changes exploiting this. * support the ARM X-Gene GPIO standby driver. - make it possible for the generic GPIO driver to read back the value set registers to reflect current status. - loads of OMAP IRQ handling fixes. - incremental improvements to Kona, max732x, OMAP, MXC, RCAR, PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x. - janitorial (constification, checkpatch cleanups)" * tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: Fix checkpatch.pl issues gpio: pcf857x: handle only enabled irqs gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use gpio: improve error reporting on own descriptors gpio: promote own request failure to pr_err() gpio: Added support to Zynq Ultrascale+ MPSoC gpio: add ETRAXFS GPIO driver fix documentation after renaming gpiod_set_array to gpiod_set_array_value gpio: Add GPIO support for Broadcom STB SoCs gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver gpio: tb10x: Drop unneeded free_irq() call gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip gpio: stp-xway: Use the of_property_read_u32 helper gpio: pcf857x: Check for irq_set_irq_wake() failures gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs gpio: Prevent an integer overflow in the pca953x driver gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly gpio: omap: rework omap_gpio_request to touch only gpio specific registers gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers ...
2015-06-23Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - plug a potential race related to chained interrupt handlers - core updates which address the needs of the x86 irqdomain conversion - new irqchip callback to support affinity settings for VCPUs - the usual pile of updates to interrupt chip drivers - a few helper functions to allow further cleanups and simplifications I have a largish pile of coccinelle scripted/verified cleanups and simplifications pending on top of that, but I prefer to send that towards the end of the merge window when the arch/driver changes have hit your tree to avoid API change wreckage as far as possible" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) genirq: Remove bogus restriction in irq_move_mask_irq() irqchip: atmel-aic5: Add sama5d2 support irq: spear-shirq: Fix race in installing chained IRQ handler irq: irq-keystone: Fix race in installing chained IRQ handler gpio: gpio-tegra: Fix race in installing chained IRQ handler gpio: gpio-mxs: Fix race in installing chained IRQ handler gpio: gpio-mxc: Fix race in installing chained IRQ handler ARM: gemini: Fix race in installing GPIO chained IRQ handler GPU: ipu: Fix race in installing IPU chained IRQ handler ARM: sa1100: convert SA11x0 related code to use new chained handler helper irq: Add irq_set_chained_handler_and_data() irqchip: exynos-combiner: Save IRQ enable set on suspend genirq: Introduce helper function irq_data_get_affinity_mask() genirq: Introduce helper function irq_data_get_node() genirq: Introduce struct irq_common_data to host shared irq data genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED irqchip: renesas: intc-irqpin: Improve binding documentation genirq: Set IRQCHIP_SKIP_SET_WAKE for no_irq_chip ...
2015-06-18gpio: gpio-tegra: Fix race in installing chained IRQ handlerRussell King
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4z0M-0002Sl-Ti@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18gpio: gpio-mxs: Fix race in installing chained IRQ handlerRussell King
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4z0H-0002Sf-P9@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18gpio: gpio-mxc: Fix race in installing chained IRQ handlerRussell King
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/E1Z4z0C-0002SX-Lj@rmk-PC.arm.linux.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-16gpio: Fix checkpatch.pl issuesDaniel Lockyer
This patch fixes some issues given by checkpatch. Fixes include bracket placement, spacing and indenting. Signed-off-by: Daniel Lockyer <thisisdaniellockyer@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16gpio: pcf857x: handle only enabled irqsGrygorii Strashko
Now pcf857x_irq() IRQ's dispatcher will try to run nested IRQ handlers for each GPIO pin which state has changed. Such IRQs are, actually, spurious and nested IRQ handlers have to be called only for IRQs wich were enabled by users. This is not critical issue - just /proc/interrupts will display counters for unused IRQS: 399: 4 0 pcf857x 0 Edge 428: 1 0 pcf857x 13 Edge 430: 1 0 pcf857x 15 Edge Hence, fix it by adding irq_enabled field in struct pcf857x to track enabled GPIO IRQs and corresponding callbacks in pcf857x_irq_chip. Similar functionality was presented in pcf857x driver, commit 21fd3cd1874a ('gpio: pcf857x: call the gpio user handler iff...') and then it was removed by commit a39294bdf4b0 ('gpio: pcf857x: Switch to use gpiolib irqchip...') Cc: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: a39294bdf4b0 ('gpio: pcf857x: Switch to use gpiolib irqchip helpers') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-11gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not foundMika Westerberg
If a driver requests a GPIO described in its _CRS but the GPIO host controller (gpiochip) driver providing the GPIO has not been loaded yet acpi_get_gpiod() returns -ENODEV which causes the calling driver to fail. If the gpiochip driver is loaded afterwards the driver requesting the GPIO will not notice this. Better approach is to return -EPROBE_DEFER in such case. Then when the gpiochip driver appears the driver requesting the GPIO will be probed again. This also aligns ACPI GPIO lookup code closer to DT as it does pretty much the same when no gpiochip driver was found. Reported-by: Tobias Diedrich <tobiasdiedrich@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module useHanjun Guo
acpi_gpiochip_request(free)_interrupts can be used for modules, so export them. This also fixs a compile error when xgene-sb configured as kernel module. Fixes: 733cf014f020 "gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver" Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
2015-06-10gpio: improve error reporting on own descriptorsLinus Walleij
When requesting own descriptors through hogs, it is useful to get some details about what's going on if we encounter problems. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10gpio: promote own request failure to pr_err()Linus Walleij
These error messages are helpful to see that we fail to get hogs. Promote them to real errors so they appear in the boot crawl. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10gpio: Added support to Zynq Ultrascale+ MPSoCAnurag Kumar Vulisha
Added support to Zynq Ultrascale+ MPSoC on the existing zynq gpio driver. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10gpio: add ETRAXFS GPIO driverRabin Vincent
Add a GPIO driver for the General I/O block on Axis ETRAX FS SoCs. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02gpio: Add GPIO support for Broadcom STB SoCsGregory Fong
This adds support for the GPIO IP "UPG GIO" used on Broadcom STB SoCs (BCM7XXX and some others). Uses basic_mmio_gpio to instantiate a gpio_chip for each bank. The driver assumes that it handles the base set of GPIOs on the system and that it can start its numbering sequence from 0, so any GPIO expanders used with it must dynamically assign GPIO numbers after this driver has finished registering its GPIOs. Does not implement the interrupt-controller portion yet, will be done in a future commit. v2: - change include to use <linux/gpio/driver.h> instead of <linux/gpio.h> - get rid of unnecessary imask member in struct bank - rename GPIO_PER_BANK -> MAX_GPIO_PER_BANK - always have 32 GPIOs per bank and add 'width' member in struct bank to hold actual number of GPIOs in use - mark of_match table as const List-usage-fixed-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02gpio: xgene: add ACPI support for APM X-Gene GPIO standby driverY Vo
Add ACPI support for APM X-Gene GPIO standby driver. Signed-off-by: Y Vo <yvo@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02gpio: tb10x: Drop unneeded free_irq() callAxel Lin
Current code uses devm_request_irq() in .probe, so drop the unneeded free_irq() call in .remove. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Christian Ruppert <christian.ruppert@alitech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchipAaron Lu
The CrystalCove GPIO irqchip doesn't have irq_set_wake callback defined so we should set IRQCHIP_SKIP_SET_WAKE for it or it would cause an irq desc's wake_depth unbalanced warning during system resume phase from the gpio_keys driver, which is the driver for the power button of the ASUS T100 laptop. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02gpio: stp-xway: Use the of_property_read_u32 helperMartin Blumenstingl
This removes some redundant code but does not have any functional impact. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: pcf857x: Check for irq_set_irq_wake() failuresGeert Uytterhoeven
If an interrupt controller doesn't support wake-up configuration, irq_set_irq_wake() returns an error code. Then any subsequent call trying to deconfigure wake-up will cause an imbalance, and a warning will be printed: WARNING: CPU: 1 PID: 1341 at kernel/irq/manage.c:540 irq_set_irq_wake+0x Unbalanced IRQ 26 wake disable To fix this, refrain from any further parent interrupt controller (de)configuration if irq_set_irq_wake() failed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio-stp-xway: Fix enabling the highest bit of the PHY LEDsMartin Blumenstingl
0x3 only masks two bits, but three bits have to be allowed. This fixes GPHY0 LED2 (which is the highest bit of phy2) on my board. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: Prevent an integer overflow in the pca953x driverJoshua Scott
Interrupts were missed if an 8-bit integer overflow occurred. This was observed when bank0,pin7 and bank1,pin7 changed simultaniously. As the 8-bit totals were only checked against zero, replace them with booleans. Name the booleans so that their purpose is clear. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: omap: rework omap_gpio_irq_startup to handle current pin state properlyGrygorii Strashko
The omap_gpio_irq_startup() can be called at time when: - corresponding GPIO has been requested already and in this case it has to be configured as input already. If not - return with -EINVAL and do not try to re-configure it as it could be unsafe. - corresponding GPIO is free: reconfigure GPIO as input. In addition, call omap_enable_gpio_module directly as all needed checks are already present inside it. Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: omap: rework omap_gpio_request to touch only gpio specific registersGrygorii Strashko
The GPIO Chip and GPIO IRQ Chip functionality are essentially orthogonal, so GPIO Chip implementation shouldn't touch GPIO IRQ specific registers and vise versa. Hence, rework omap_gpio_request: - don't reset GPIO IRQ triggering type to IRQ_TYPE_NONE, because GPIO irqchip should be responsible for that; - call directly omap_enable_gpio_module as all needed checks are already present inside it. Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registersGrygorii Strashko
The GPIO Chip and GPIO IRQ Chip functionality are essentially orthogonal, so GPIO IRQ Chip implementation shouldn't touch GPIO specific registers and vise versa. Hence, rework omap_gpio_irq_shutdown and try to touch only irqs specific registers: - don't configure GPIO as input (it, actually, should be already configured as input). - don't clear debounce configuration if GPIO is still used as GPIO. We need to take in to account here commit c9c55d921115 ("gpio/omap: fix off-mode bug: clear debounce settings on free/reset"). Also remove omap_reset_gpio() function as it is not used any more. Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: omap: fix error handling in omap_gpio_irq_typeGrygorii Strashko
The GPIO bank will be kept powered in case if input parameters are invalid or error occurred in omap_gpio_irq_type. Hence, fix it by ensuring that GPIO bank will be unpowered in case of errors and add additional check of value returned from omap_set_gpio_triggering(). Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: omap: fix omap_gpio_free to not clean up irq configurationGrygorii Strashko
This patch fixes following issue: - GPIOn is used as IRQ by some dev, for example PCF8575.INT -> gpio6.11 - PCFx driver knows nothing about type of IRQ line (GPIO or not) so it doesn't request gpio and just do request_irq() - If gpio6.11 will be exported through the sysfs and then un-xeported then IRQs from PCFx will not be received any more, because IRQ configuration for gpio6.11 will be cleaned up unconditionally in omap_gpio_free. Fix this by removing all GPIO IRQ specific code from omap_gpio_free() and also do GPIO clean up (change direction to 'in' and disable debounce) only if corresponding GPIO is not used as IRQ too. GPIO IRQ will be properly cleaned up by GPIO irqchip code. Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: rcar: Check for irq_set_irq_wake() failuresGeert Uytterhoeven
If an interrupt controller doesn't support wake-up configuration, irq_set_irq_wake() returns an error code. Then any subsequent call trying to deconfigure wake-up will cause an imbalance, and a warning will be printed: WARNING: CPU: 1 PID: 1341 at kernel/irq/manage.c:540 irq_set_irq_wake+0x9c/0xf8() Unbalanced IRQ 26 wake disable To fix this, refrain from any further parent interrupt controller (de)configuration if irq_set_irq_wake() failed. Alternative fixes would be: - calling "gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE)" from the platform code, - setting "gic_chip.flags = IRQCHIP_SKIP_SET_WAKE" in the GIC driver code, but these were withheld as the GIC hardware doesn't really support wake-up interrupts. Fixes: ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable when wake-up is enabled") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpiolib: rename gpiod_set_array to gpiod_set_array_valueRojhalat Ibrahim
There have been concerns that the function names gpiod_set_array() and gpiod_get_array() might be confusing to users. One might expect gpiod_get_array() to return array values, while it is actually the array counterpart of gpiod_get(). To be consistent with the single descriptor API we could rename gpiod_set_array() to gpiod_set_array_value(). This makes some function names a bit lengthy: gpiod_set_raw_array_value_cansleep(). Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19Drivers: gpio: Fix spelling errorsColin Cronin
Fixed several spelling errors in gpio-lynxpoint, gpio-pca953x, gpio-tegra, gpio-zynq, gpiolib-of, gpiolib. Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-13gpiolib: cleanup chained handler and dataDmitry Eremin-Solenikov
Clean up chained handler and handler data if they were set by gpiochip_set_chained_irqchip(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-13gpio: dln2: fix build breakageJohan Hovold
The dln2 driver was initialising a gpiolib private field, which is now gone. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12gpio: gpio-kempld: Fix get_direction return valueMichael Brunner
This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Cc: Stable <stable@vger.kernel.org> # v3.12+ Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12gpio: xlp: Add missing .owner and .label settings for gpio_chipAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>