Age | Commit message (Collapse) | Author |
|
[ Upstream commit e6e7b48b295afa5a5ab440de0a94d9ad8b3ce2d0 ]
I was under the misconception that the sysfs dev stuff can be fully
set up, and then registered all in one step with device_add. That's
true for properties and property groups, but not for parents and child
devices. Those must be fully registered before you can register a
child.
Add a bit of tracking to make sure that asynchronous mst connector
hotplugging gets this right. For consistency we rely upon the implicit
barriers of the connector->mutex, which is taken anyway, to ensure
that at least either the connector or device registration call will
work out.
Mildly tested since I can't reliably reproduce this on my mst box
here.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 75fb636324a839c2c31be9f81644034c6142e469 upstream.
commit a39be606f99d ("drm: Do a full device unregister when unplugging")
causes backtraces like this one when unplugging an usb drm device while
it is in use:
usb 2-3: USB disconnect, device number 25
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:424
drm_mode_config_cleanup+0x220/0x280 [drm]
...
RIP: 0010:drm_mode_config_cleanup+0x220/0x280 [drm]
...
Call Trace:
gm12u320_modeset_cleanup+0xe/0x10 [gm12u320]
gm12u320_driver_unload+0x35/0x70 [gm12u320]
drm_dev_unregister+0x3c/0xe0 [drm]
drm_unplug_dev+0x12/0x60 [drm]
gm12u320_usb_disconnect+0x36/0x40 [gm12u320]
usb_unbind_interface+0x72/0x280
device_release_driver_internal+0x158/0x210
device_release_driver+0x12/0x20
bus_remove_device+0x104/0x180
device_del+0x1d2/0x350
usb_disable_device+0x9f/0x270
usb_disconnect+0xc6/0x260
...
[drm:drm_mode_config_cleanup [drm]] *ERROR* connector Unknown-1 leaked!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:458
drm_mode_config_cleanup+0x268/0x280 [drm]
...
<same Call Trace>
---[ end trace 80df975dae439ed6 ]---
general protection fault: 0000 [#1] SMP
...
Call Trace:
? __switch_to+0x225/0x450
drm_mode_rmfb_work_fn+0x55/0x70 [drm]
process_one_work+0x193/0x3c0
worker_thread+0x4a/0x3a0
...
RIP: drm_framebuffer_remove+0x62/0x3f0 [drm] RSP: ffffb776c39dfd98
---[ end trace 80df975dae439ed7 ]---
After which the system is unusable this is caused by drm_dev_unregister
getting called immediately on unplug, which calls the drivers unload
function which calls drm_mode_config_cleanup which removes the framebuffer
object while userspace is still holding a reference to it.
Reverting commit a39be606f99d ("drm: Do a full device unregister
when unplugging") leads to the following oops on unplug instead,
when userspace closes the last fd referencing the drm_dev:
sysfs group 'power' not found for kobject 'card1-Unknown-1'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2459 at fs/sysfs/group.c:237
sysfs_remove_group+0x80/0x90
...
RIP: 0010:sysfs_remove_group+0x80/0x90
...
Call Trace:
dpm_sysfs_remove+0x57/0x60
device_del+0xfd/0x350
device_unregister+0x1a/0x60
drm_sysfs_connector_remove+0x39/0x50 [drm]
drm_connector_unregister+0x5a/0x70 [drm]
drm_connector_unregister_all+0x45/0xa0 [drm]
drm_modeset_unregister_all+0x12/0x30 [drm]
drm_dev_unregister+0xca/0xe0 [drm]
drm_put_dev+0x32/0x60 [drm]
drm_release+0x2f3/0x380 [drm]
__fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbe ]---
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
IP: down_write+0x1f/0x40
...
Call Trace:
debugfs_remove_recursive+0x55/0x1b0
drm_debugfs_connector_remove+0x21/0x40 [drm]
drm_connector_unregister+0x62/0x70 [drm]
drm_connector_unregister_all+0x45/0xa0 [drm]
drm_modeset_unregister_all+0x12/0x30 [drm]
drm_dev_unregister+0xca/0xe0 [drm]
drm_put_dev+0x32/0x60 [drm]
drm_release+0x2f3/0x380 [drm]
__fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbf ]---
This is caused by the revert moving back to drm_unplug_dev calling
drm_minor_unregister which does:
device_del(minor->kdev);
dev_set_drvdata(minor->kdev, NULL); /* safety belt */
drm_debugfs_cleanup(minor);
Causing the sysfs entries to already be removed even though we still
have references to them in e.g. drm_connector.
Note we must call drm_minor_unregister to notify userspace of the unplug
of the device, so calling drm_dev_unregister is not completely wrong the
problem is that drm_dev_unregister does too much.
This commit fixes drm_unplug_dev by not only reverting
commit a39be606f99d ("drm: Do a full device unregister when unplugging")
but by also adding a call to drm_modeset_unregister_all before the
drm_minor_unregister calls to make sure all sysfs entries are removed
before calling device_del(minor->kdev) thereby also fixing the second
set of oopses caused by just reverting the commit.
Fixes: a39be606f99d ("drm: Do a full device unregister when unplugging")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeffy <jeffy.chen@rock-chips.com>
Cc: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Reported-by: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601115430.4113-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function name and special " *ERROR*" from argument list
$ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected)
text data bss dec hex filename
5635366 182579 14328 5832273 58fe51 drivers/gpu/drm/built-in.o.new
5779552 182579 14328 5976459 5b318b drivers/gpu/drm/built-in.o.old
Using "%ps", __builtin_return_address(0) is the same as "%s", __func__
except for static inlines, but it's more or less the same output.
Miscellanea:
o Convert args... to ##__VA_ARGS__
o The equivalent DRM_DEV_<FOO> macros are rarely used and not
worth conversion
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/01f976d5ab93c985756fc1b2e83656fb0a2a28c8.1474856262.git.joe@perches.com
|
|
There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
|
|
If passing name == NULL to drm_drv_set_unique() we now get -ENOMEM
as kstrdup() returns NULL. Instead check for this explicitly and
return -EINVAL if no name is provided.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-1-teg@jklm.no
|
|
Various cleanups to the DRM core initialization and exit handlers:
- Register chrdev last: Once register_chrdev() returns, open() will
succeed on the given chrdevs. This is usually not an issue, as no
chardevs are registered, yet. However, nodes can be created by
user-space via mknod(2), even though such major/minor combinations are
unknown to the kernel. Avoid calling into drm_stub_open() in those
cases.
Again, drm_stub_open() would just bail out as the inode is unknown,
but it's really non-obvious if you hack on drm_stub_open().
- Unify error-paths into just one label. All the error-path helpers can
be called even though the constructors were not called yet, or failed.
Hence, just call all cleanups unconditionally.
- Call into drm_global_release(). This is a no-op, but provides
debugging helpers in case there're GLOBALS left on module unload. This
function was unused until now.
- Use DRM_ERROR() instead of printk(), and also print the error-code on
failure (even if it is static!).
- Don't throw away error-codes of register_chrdev()!
- Don't hardcode -1 as errno. This is just plain wrong.
- Order exit-handlers in the exact reverse order of initialization
(except if the order actually matters for syncing-reasons, which is
not the case here, though).
v2:
- Call drm_core_exit() directly from the init-error-handler. Requires to
drop __exit annotation, though.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-7-dh.herrmann@gmail.com
|
|
The drm_core.h header contains a set of constants meant to be used
throughout DRM. However, as it turns out, they're each used just once and
don't bring any benefit. They're also grossly mis-named and lack
name-spacing. This patch inlines them, or moves them into drm_internal.h
as appropriate:
- CORE_AUTHOR and CORE_DESC are inlined into corresponding MODULE_*()
macros. It's just confusing having to follow 2 pointers when trying to
find the definition of these fields. Grep'ping for MODULE_AUTHOR()
should reveal the full information, if there's no strong reason not to.
- CORE_NAME, CORE_DATE, CORE_MAJOR, CORE_MINOR, and CORE_PATCHLEVEL are
inlined into the sysfs 'version' attribute. They're stripped
everywhere else (which is just some printk() statements). CORE_NAME
just doesn't make *any* sense, as we hard-code it in many places,
anyway. The other constants are outdated and just serve
binary-compatibility purposes. Hence, inline them in 'version' sysfs
attribute (we might even try dropping it..).
- DRM_IF_MAJOR and DRM_IF_MINOR are moved into drm_internal.h as they're
only used by the global ioctl handlers. Furthermore, versioning
interfaces breaks backports and as such is deprecated, anyway. We just
keep them for historic reasons. I doubt anyone will ever modify them
again.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-6-dh.herrmann@gmail.com
|
|
Since dev_printk likes to print "(NULL device *):" when passed in a NULL
pointer, we have to manually call printk() ourselves.
Fixes: c4e68a583202 ("drm: Introduce DRM_DEV_* log messages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819073750.16610-1-chris@chris-wilson.co.uk
|
|
This patch consolidates all the various log functions/macros into
one uber function, drm_log. It also introduces some new DRM_DEV_*
variants that print the device name to delineate multiple devices
of the same type.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1471303084-3757-1-git-send-email-seanpaul@chromium.org
|
|
The minor referred to by "DRM_MINOR_LEGACY" is called 'dev->primary' and
gets 'cardX' as name assigned. Lets reduce this magnificent number of
names for the same concept by one and rename DRM_MINOR_LEGACY to
DRM_MINOR_PRIMARY (to match the actual struct-member name).
Furthermore, this is in no way a legacy node, so lets not call it that.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160803180432.1341-2-dh.herrmann@gmail.com
|
|
Rather than do a partial unregister of just the minors, unregister the
device (drm_dev_unregister(), and so remove all userspace interfaces,
when the device is unplugged (drm_unplug_dev()).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466778982-6974-3-git-send-email-chris@chris-wilson.co.uk
|
|
Since
commit e112e593b215c394c0303dbf0534db0928e87967
Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Date: Fri Dec 11 11:20:28 2015 +0100
drm: use dev_name as default unique name in drm_dev_alloc()
we're using a reasonable default which should work for everyone. Only
mtk, rcar-du and sun4i are affected, and as kms-only drivers without
any rendering support no one should ever care about the unique name
v2: Rebase on top of mediatek.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-5-git-send-email-daniel.vetter@ffwll.ch
|
|
Lots of arm drivers get this wrong and for most arm boards this is the
right thing actually. And anyway with most loaders you want to chase
sysfs links anyway to figure out which dri device you want.
This will fix dmesg noise for rockchip and sti.
Also add a fallback to driver->name for entirely virtual drivers like
vgem.
v2: Rebase on top of
commit e112e593b215c394c0303dbf0534db0928e87967
Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Date: Fri Dec 11 11:20:28 2015 +0100
drm: use dev_name as default unique name in drm_dev_alloc()
and simplify a bit. Plus add a comment.
v3: WARN_ON(!dev->unique) as discussed with Emil.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-3-git-send-email-daniel.vetter@ffwll.ch
|
|
- Group declarations for separate files (drm_bridge.c, drm_edid.c)
- Move declarations only used within drm.ko to drm_crtc_internal.h
- drm_property_type_valid to drm_crtc.c, its only callsite
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-2-git-send-email-daniel.vetter@ffwll.ch
|
|
Like what has been done for connectors add callbacks on encoder,
crtc and plane to let driver do actions after drm device registration.
Correspondingly, add callbacks called before unregister drm device.
version 2:
add drm_modeset_register_all() and drm_modeset_unregister_all()
to centralize all calls
version 3:
in error case unwind registers in drm_modeset_register_all
fix uninitialed return value
inverse order of unregistration in drm_modeset_unregister_all
version 4:
move function definitions in drm_crtc_internal.h
remove not needed documentation
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466519829-4000-1-git-send-email-benjamin.gaignard@linaro.org
|
|
0-day kbuilder found
[ 1.360244] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1.360972] IP: [<c14db9ad>] mutex_lock_nested+0x11f/0x2c3
[ 1.361512] *pde = 00000000
[ 1.361827] Oops: 0002 [#1]
[ 1.362123] Modules linked in:
[ 1.362451] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc2-00564-ge28cd4d #1
[ 1.363202] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[ 1.364105] task: c03d0000 ti: d28da000 task.ti: d28da000
[ 1.364636] EIP: 0060:[<c14db9ad>] EFLAGS: 00210096 CPU: 0
[ 1.365215] EIP is at mutex_lock_nested+0x11f/0x2c3
[ 1.365703] EAX: 00000000 EBX: d39e8ae8 ECX: d39e8b14 EDX: c1361cf9
[ 1.366351] ESI: c03d0000 EDI: d28dbed0 EBP: d28dbeec ESP: d28dbec0
[ 1.367010] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 1.367534] CR0: 80050033 CR2: 00000000 CR3: 019a9000 CR4: 00000690
[ 1.368152] Stack:
[ 1.368356] d39e8b14 d39e8b24 c1361cf9 00200246 d39e8b14 00000000 11111111 d28dbed0
[ 1.369235] d39e8800 d39e8ae8 00000000 d28dbf08 c1361cf9 d28dbf0c c10b25be d39e8800
[ 1.370087] 00000000 00000000 d28dbf1c c135e37d fffffff4 ffffffff 00000000 d28dbf28
[ 1.371012] Call Trace:
[ 1.371272] [<c1361cf9>] ? drm_connector_register_all+0x1a/0x92
[ 1.371847] [<c1361cf9>] drm_connector_register_all+0x1a/0x92
[ 1.372421] [<c10b25be>] ? kstrdup+0x25/0x3a
[ 1.372863] [<c135e37d>] drm_dev_register+0x59/0x99
[ 1.373358] [<c195ea3e>] vgem_init+0x34/0x49
[ 1.373770] [<c195ea0a>] ? mipi_dsi_bus_init+0xf/0xf
[ 1.374257] [<c100048f>] do_one_initcall+0x7c/0xfd
[ 1.374754] [<c104b409>] ? parse_args+0x1fd/0x314
[ 1.375259] [<c1939c10>] ? kernel_init_freeable+0xd0/0x179
[ 1.375837] [<c1939c2c>] kernel_init_freeable+0xec/0x179
[ 1.376371] [<c14d66ea>] kernel_init+0x8/0xcb
[ 1.376806] [<c14debce>] ret_from_kernel_thread+0xe/0x30
[ 1.377322] [<c14d66e2>] ? rest_init+0x10e/0x10e
[ 1.377754] Code: 89 fa e8 71 c5 b7 ff 8b 4e 04 89 fa 89 d8 e8 8e c6 b7 ff 8d 43 2c 89 45 d4 8b 43 30 8d 4b 2c 89 45 e8 89 7b 30 89 4d e4 8b 55 dc <89> 38 8d 43 3c 89 75 ec e8 c9 dd b7 ff eb 0c 31 c0 87 03 48
+75
[ 1.380442] EIP: [<c14db9ad>] mutex_lock_nested+0x11f/0x2c3 SS:ESP 0068:d28dbec0
[ 1.381174] CR2: 0000000000000000
when loading the non-modesetting vGEM module. To prevent use of the
uninitialised dev->mode_config from drm_dev_register() we move the
drm_connector_register_all() under a DRIVER_MODESET guard. Longer term,
we probably want to initialise the embedded dev->mode_config automatically
from drm_dev_init() for all DRIVER_MODESET drivers.
v2: Also protect drm_dev_unregister.
Fixes: e28cd4d0a223 ("drm: Automatically register/unregister all connectors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Testcase: igt/vgem_reload_basic
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466257601-5656-1-git-send-email-chris@chris-wilson.co.uk
|
|
As the drm_connector is now safe for multiple calls to
register/unregister, automatically perform a registration on all known
connectors drm drv_register (and unregister from drm_drv_unregister).
Drivers can still call drm_connector_register() and
drm_connector_unregister() individually, or defer as required.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-2-git-send-email-chris@chris-wilson.co.uk
|
|
In order to allow drivers to pack their privates and drm_device into one
struct (e.g. for subclassing), export the initialisation routines for
struct drm_device.
v2: Missed return ret. That error path had only one job to do!
v3: Cross-referencing drm_dev_init/drm_dev_alloc in kerneldoc, fix
missed error code for goto err_minors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465993109-19523-2-git-send-email-chris@chris-wilson.co.uk
|
|
For modern drivers pretty much the only thing drm_master does is
handling authentication for the primary/legacy drm_minor node. Instead
of having it all over drm files, move it all together into drm_auth.c.
This patch just does code-motion, follow up patches will also extract
the master logic from file open&release paths.
Reviewed-by: Chris Wilson Mchris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-5-git-send-email-daniel.vetter@ffwll.ch
|
|
Master-based auth only exists for the legacy/primary drm_minor, hence
there can only be one per device. The goal here is to untangle the
epic dereference games of minor->master and master->minor which is
just massively confusing.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465930269-7883-4-git-send-email-daniel.vetter@ffwll.ch
|
|
The PM core introduced the ability to keep devices runtime suspended
during the entire system suspend/resume process with commit aae4518b3124
("PM / sleep: Mechanism to avoid resuming runtime-suspended devices
unnecessarily"). Before this so-called "direct-complete" procedure was
introduced, devices were always runtime resumed only to be immediately
put to sleep again using their ->suspend hook. Direct-complete is
enabled by returning a positive value from the ->prepare hook. The PCI
core usually does this automatically.
Direct-complete is only available for a device if all children use it as
well. Currently we cannot support direct-complete for DRM drivers
because the DRM core automatically registers multiple DRM minors which
belong to device class drm_class, and drm_class uses a struct dev_pm_ops
which lacks the ->prepare callback.
While this could be solved by adding the missing ->prepare callback,
closer inspection shows that there are no DRM drivers left which declare
the legacy ->suspend and ->resume callbacks in their drm_driver struct.
The last ones to remove them were i915 with commit 1751fcf9f92e
("drm/i915: Fix module initialisation, v2.") and exynos with commit
e7fefb1d5af5 ("drm/exynos: remove legacy ->suspend()/resume()").
Consequently the struct dev_pm_ops of drm_class is now dead code. Remove
it. If no dev_pm_ops is declared for a device, the PM core automatically
enables direct-complete for it, thereby making that mechanism available
to the parent DRM PCI devices.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/da848fcd5ca72a35d9a722e644719977a47bb7ba.1465382836.git.lukas@wunner.de
|
|
amdgpu gained dev->struct_mutex usage, and that's because it's walking
the dev->filelist list. Protect that list with it's own lock to take
one more step towards getting rid of struct_mutex usage in drivers
once and for all.
While doing the conversion I noticed that 2 debugfs files in i915
completely lacked appropriate locking. Fix that up too.
v2: don't forget to switch to drm_gem_object_unreference_unlocked.
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-9-git-send-email-daniel.vetter@ffwll.ch
|
|
And again make sure it's a no-op for modern drivers. Another case of
dev->struct_mutex gone for modern drivers!
Note that the entirety of the legacy addmap interface is now protected
by DRIVER_MODESET. Note that just auditing kernel code is not enough,
since userspace loves to set up legacy maps on it's own for various
things - with ums userspace and kernel space share control over
resources.
v2: Also add a DRIVER_* check like for all other maps functions to
really short-circuit the code. And give drm_legacy_rmmap used by the
dev unregister code the same treatment.
v3:
- remove redundant return; (Alex, Chris)
- don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT.
v4: Again special case nouveau. The problem is not directly in the
ddx, but that it calls dri1 functions from the X server. And those do
call drmAddMap. Fixed only in
commit b1a630b48210d6a3c44994fce1b73273000ace5c
Author: Dave Airlie <airlied@redhat.com>
Date: Wed Nov 7 14:45:14 2012 +1000
nouveau: drop DRI1 device open interface.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461741618-12679-1-git-send-email-daniel.vetter@ffwll.ch
|
|
Only two drivers implement this hook. vmwgfx (which doesn't need it
really) and legacy radeon (which since v1 has been nuked, yay).
v1: Rebase over radeon ums removal.
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-6-git-send-email-daniel.vetter@ffwll.ch
|
|
Let's be user-friendly and print an actually helpful parameter
description.
This makes modinfo output the debug parameter like this:
parm: debug:Enable debug output, where each bit enables a debug category.
Bit 0 (0x01) will enable CORE messages (drm core code)
Bit 1 (0x02) will enable DRIVER messages (drm controller code)
Bit 2 (0x04) will enable KMS messages (modesetting code)
Bit 3 (0x08) will enable PRIME messages (prime code)
Bit 4 (0x10) will enable ATOMIC messages (atomic code)
Bit 5 (0x20) will enable VBL messages (vblank code) (int)
Changes from v1:
* Fixed s/PRMIE/PRIME typo.
* Add ATOMIC and VBL debug parameter documentation.
* Prefix the continuation lines with two tabs and
removed the last new line.
* Remove spurious whitespace.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461170703-11216-1-git-send-email-ezequiel@vanguardiasur.com.ar
|
|
As a pair to already existing drm_connector_unregister_all() we're adding
generic implementation of what is already done in some drivers.
Once this helper is implemented we'll be ready to switch existing
driver-specific implementations with the generic one.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-2-git-send-email-abrodkin@synopsys.com
|
|
We moved the module options from drm_drv.c to drm_irq.c in 18882995713d
('drm: Move vblank related module options into drm_irq.c'). Let's move
the MODULE_PARM_DESC()s as well so they're together.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160108110045.GF32195@mwanda
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The following code pattern exists in some DRM drivers:
ddev = drm_dev_alloc(&driver, parent_dev);
drm_dev_set_unique(ddev, dev_name(parent_dev));
(Sometimes dev_name(ddev->dev) is used, which is the same.)
As suggested in
http://lists.freedesktop.org/archives/dri-devel/2015-December/096441.html,
the unique name of a new DRM device can be set as dev_name(parent_dev)
when parent_dev is not NULL (vgem is a special case).
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
drm_dev_set_unique() uses a format string to define the unique name of a
device. This feature is not used as currently all the calls to this
function either use "%s" as a format string or directly use
dev_name().
Even though this second kind of call does not introduce security
problems, because there cannot be "%" characters in dev_name() results,
gcc issues a warning when building with -Wformat-security flag
("warning: format string is not a string literal (potentially
insecure)"). This warning is useful to find real bugs like the one
fixed by commit 3958b79266b1 ("configfs: fix kernel infoleak through
user-controlled format string"). False positives which do not bring
an extra value make the work of finding real bugs harder.
Therefore remove the format-string feature from drm_dev_set_unique().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1449829228-4425-1-git-send-email-nicolas.iooss_linux@m4x.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
A client calling drmSetMaster() using a file descriptor that was opened
when another client was master would inherit the latter client's master
object and all its authenticated clients.
This is unwanted behaviour, and when this happens, instead allocate a
brand new master object for the client calling drmSetMaster().
Fixes a BUG() throw in vmw_master_set().
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Drop unused drm_atomic and fix comment for drm_debug.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
->load is deprecated, bus functions are deprecated and everyone
should use drm_dev_alloc®ister.
So update the .tmpl (and pull a bunch of the overview docs into the
sourcecode to increase chances that it'll stay in sync in the future)
and add notes to functions which are deprecated. I didn't bother to
clean up and document the unload sequence similarly since that one is
still a bit a mess: drm_dev_unregister does way too much,
drm_unplug_dev does what _unregister should be doing but then has the
complication of promising something it doesn't actually do (it doesn't
unplug existing open fds for instance, only prevents new ones).
Motivated since I don't want to hunt every new driver for usage of
drm_platform_init any more ;-)
v2: Reword the deprecation note for ->load a bit, using Laurent's
suggestion as an example (but making the wording a bit stronger even).
Fix spelling in commit message.
v3: More spelling fixes from Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Right now, drm_sysfs_create() returns the newly allocated "struct class"
to the caller (which is drm_core_init()), which then has to set the
global variable 'drm_class'. During cleanup, though, we call
drm_sysfs_destroy() which implicitly uses the global 'drm_class'. This is
confusing, as ownership of the global 'drm_class' is non-obvious.
This patch changes drm_sysfs_create() to drm_sysfs_init() and makes it
initialize the 'drm_class' object directly, rather than returning it.
This way, both drm_sysfs_init() and drm_sysfs_destroy() work in a similar
fashion and manage the global drm class.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Legacy s/r hooks are only used for shadow-attaching drivers, warn
when a KMS driver tries to use them.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
connector hotplug locking cleanup and fixes to make it save against
atomic. Note that because of depencies this is based on top of the
drm-intel-next pull, so that one needs to go in before this one.
I've also thrown in the mode_group removal on top since it's defunct,
never worked really, no one seems to care and the code can be resurrected
easily.
* tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
drm: gc now dead mode_group code
drm: Stop filtering according to mode_group in getresources
drm: Roll out drm_for_each_{plane,crtc,encoder}
drm/cma-helper: Fix locking in drm_fb_cma_debugfs_show
drm: Roll out drm_for_each_connector more
drm: Amend connector list locking rules
drm/radeon: Take all modeset locks for DP MST hotplug
drm/i915: Take all modeset locks for DP MST hotplug
drm: Check locking in drm_for_each_fb
drm/i915: Use drm_for_each_fb in i915_debugfs.c
drm: Check locking in drm_for_each_connector
drm/fbdev-helper: Grab mode_config.mutex in drm_fb_helper_single_add_all_connectors
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
drm: Add modeset object iterators
drm: Simplify drm_for_each_legacy_plane arguments
|
|
Two nice things here:
- drm_dev_register will truly register everything in the right order
if the driver doesn't have a ->load callback. Before this we had to
init the primary mode_group after the device nodes where already
registered.
- Less things to keep track of when reworking the connector locking,
yay!
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
It can't fail really.
Also remove the redundant kms check Peter added.
Cc: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
The context functions are not used by the i915 driver and should not
be used by modeset drivers. These driver functions contain several bugs
and security holes. This change makes these functions optional can be
turned on by a setting, they are turned off by default for modeset
driver with the exception of the nouvea driver that may require them with
an old version of libdrm.
The previous attempt was
commit 7c510133d93dd6f15ca040733ba7b2891ed61fd1
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 8 15:41:21 2013 +0200
drm: mark context support as a legacy subsystem
but this had to be reverted
commit c21eb21cb50d58e7cbdcb8b9e7ff68b85cfa5095
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Sep 20 08:32:59 2013 +1000
Revert "drm: mark context support as a legacy subsystem"
v2: remove returns from void function, and formatting (Daniel Vetter)
v3:
- s/Nova/nouveau/ in the commit message, and add references to the
previous attempts
- drop the part touching the drm hw lock, that should be a separate
patch.
Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2)
Cc: Peter Antoine <peter.antoine@intel.com> (v2)
Reviewed-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Now that the interface has been proven by a port of Weston (using all
atomic features including TEST_ONLY), remove the module parameter
guarding the atomic API from being exposed, and let it run free in the
wild.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In drm_master_destroy() we _free_ the master object. There is no reason to
hold any locks while dropping its static members, nor do we have to reset
it to 0.
Furthermore, kfree() already does NULL checks, so call it directly on
master->unique and drop the redundant reset-code.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The magic auth tokens we have are a simple map from cyclic IDs to drm_file
objects. Remove all the old bulk of code and replace it with a simple,
direct IDR.
The previous behavior is kept. Especially calling authmagic multiple times
on the same magic results in EINVAL except on the first call. The only
difference in behavior is that we never allocate IDs multiple times as
long as a client has its FD open.
v2:
- Fix return code of GetMagic()
- Use non-cyclic IDR allocator
- fix off-by-one in "magic > INT_MAX" sanity check
v3:
- drop redundant "magic > INT_MAX" check
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This list is write-only. It's never used for read-access, so no reason to
keep it around. Drop it!
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Use %pS for actual addresses, otherwise you'll get bad output
on arches like ppc64 where %pF expects a function descriptor.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties. To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.
A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties. Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Possible for purely virtual debug devices.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Removing the unnecessary drm_err __func__ argument by using
the equivalent %pf and __builtin_return_address(0) makes the
code smaller for every use of the DRM_ERROR macro.
For instance: (allmodconfig)
$ size drivers/gpu/drm/i915/i915.o*
text data bss dec hex filename
922447 193257 296736 1412440 158d58 drivers/gpu/drm/i915/i915.o.new
928111 193257 296736 1418104 15a378 drivers/gpu/drm/i915/i915.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The patch replaces direct access to driver_features field
by calls to helper function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The return value is not used by callers of this function
nor by uses of the DRM_ERROR macro so change the function
to return void.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Only used in one place ever, so put it right next to that.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This way drivers can't grow crazy ideas any more, and it also
helps a bit in reviewing EXPORT_SYMBOLS.
v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked
because exynos does some horrible stuff with it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|