Age | Commit message (Collapse) | Author |
|
v5:
- Let functions take struct drm_i915_private *. (Tvrtko)
- Fold vGPU related active check into the inner functions. (Kevin)
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-4-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
As the PVINFO page definition is used by both GVT-g guest (vGPU) and GVT-g
host (GVT-g kernel device model), factor it out for better code structure.
v7:
- Split the "offsetof" modification into a dedicated patch. (Joonas)
v3:
- Use offsetof to calculate the member offset of PVINFO structure (Joonas)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-2-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Pass drm_i915_private to the uncore init/fini routines and their
subservients as it is their native type.
text data bss dec hex filename
6309978 3578778 696320 10585076 a183f4 vmlinux
6309530 3578778 696320 10584628 a18234 vmlinux
a modest 400 bytes of saving, but 60 lines of code deleted!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462885804-26750-1-git-send-email-chris@chris-wilson.co.uk
|
|
Make I915_READ and I915_WRITE more type safe by wrapping the register
offset in a struct. This should eliminate most of the fumbles we've had
with misplaced parens.
This only takes care of normal mmio registers. We could extend the idea
to other register types and define each with its own struct. That way
you wouldn't be able to accidentally pass the wrong thing to a specific
register access function.
The gpio_reg setup is probably the ugliest thing left. But I figure I'd
just leave it for now, and wait for some divine inspiration to strike
before making it nice.
As for the generated code, it's actually a bit better sometimes. Eg.
looking at i915_irq_handler(), we can see the following change:
lea 0x70024(%rdx,%rax,1),%r9d
mov $0x1,%edx
- movslq %r9d,%r9
- mov %r9,%rsi
- mov %r9,-0x58(%rbp)
- callq *0xd8(%rbx)
+ mov %r9d,%esi
+ mov %r9d,-0x48(%rbp)
callq *0xd8(%rbx)
So previously gcc thought the register offset might be signed and
decided to sign extend it, just in case. The rest appears to be
mostly just minor shuffling of instructions.
v2: i915_mmio_reg_{offset,equal,valid}() helpers added
s/_REG/_MMIO/ in the register defines
mo more switch statements left to worry about
ring_emit stuff got sorted in a prep patch
cmd parser, lrc context and w/a batch buildup also in prep patch
vgpu stuff cleaned up and moved to a prep patch
all other unrelated changes split out
v3: Rebased due to BXT DSI/BLC, MOCS, etc.
v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
|
|
We'll want to avoid performing arithmetic with register offsets, so
instead calculating the vgpu PDP as pdp0_lo+offset, make the PDPs
into an array. This way we can simply loop through them.
Cc: Eddie Dong <eddie.dong@intel.com>
Cc: Jike Song <jike.song@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Yu Zhang <yu.c.zhang@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446672017-24497-25-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
|
|
Some more definitions in the PV info page are added. They are mainly
for the guest notification to Intel GVT-g device model. They are used
for Broadwell enabling.
The notification of PPGTT page table creation/destroy is to notify
GVT-g device model the life cycle of guest page tables. Then device
model will implement shadow page table for guests.
The notification of context create/destroy is optional. If it is used,
the device model will create/destroy shadow context corresponding to
the context's life cycle. Guest driver needs to make sure that the
context's LRCA and backing storage address unchanged. If it is not
used, the device model will perform the context shadow work in the
context scheduling time.
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Without this Dave's 32bit rhel compiler is annoyed. Don't ask me about
the exact rules for this stuff though, but this should be safe.
Reported-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Display switch logic is added to notify the host side that
current vGPU have a valid surface to show. It does so by
writing the display_ready field in PV INFO page, and then
will be handled in the host side. This is useful to avoid
trickiness when the VM's framebuffer is being accessed in
the middle of VM modesetting, e.g. compositing the framebuffer
in the host side.
v2:
- move the notification code outside the 'else' in load sequence
- remove the notification code in intel_crtc_set_config()
v4:
- code rebase, no need to define another dev_priv
- use #define instead of enum for display readiness
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
With Intel GVT-g, the global graphic memory space is partitioned by
multiple vGPU instances in different VMs. The ballooning code is called
in i915_gem_setup_global_gtt(), utilizing the drm mm allocator APIs to
mark the graphic address space which are partitioned out to other vGPUs
as reserved. With ballooning, host side does not need to translate a
grahpic address from guest view to host view. By now, current implementation
only support the static ballooning, but in the future, with more cooperation
from guest driver, the same interfaces can be extended to grow/shrink the
guest graphic memory dynamically.
v2:
take Chris and Daniel's comments:
- no guard page between different VMs
- use drm_mm_reserve_node() to do the reservation for ballooning,
instead of the previous drm_mm_insert_node_in_range_generic()
v3:
take Daniel's comments:
- move ballooning functions into i915_vgpu.c
- add kerneldoc to ballooning functions
v4:
take Tvrtko's comments:
- more accurate comments and commit message
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Introduce a PV INFO structure, to facilitate the Intel GVT-g
technology, which is a GPU virtualization solution with mediated
pass-through. This page contains the shared information between
i915 driver and the host emulator. For now, this structure utilizes
an area of 4K bytes on HSW GPU's unused MMIO space. Future hardware
will have the reserved window architecturally defined, and layout
of the page will be added in future BSpec.
The i915 driver load routine detects if it is running in a VM by
reading the contents of this PV INFO page. Thereafter a flag,
vgpu.active is set, and intel_vgpu_active() is used by checking
this flag to conclude if GPU is virtualized with Intel GVT-g. By
now, intel_vgpu_active() will return true, only when the driver
is running as a guest in the Intel GVT-g enhanced environment on
HSW platform.
v2:
take Chris' comments:
- call the i915_check_vgpu() in intel_uncore_init()
- sanitize i915_check_vgpu() by adding BUILD_BUG_ON() and debug info
take Daniel's comments:
- put the definition of PV INFO into a new header - i915_vgt_if.h
other changes:
- access mmio regs by readq/readw in i915_check_vgpu()
v3:
take Daniel's comments:
- move the i915/vgt interfaces into a new i915_vgpu.c
- update makefile
- add kerneldoc to functions which are non-static
- add a DOC: section describing some of the high-level design
- update drm docbook
other changes:
- rename i915_vgt_if.h to i915_vgpu.h
v4:
take Tvrtko's comments:
- fix a typo in commit message
- add debug message when vgt version mismatches
- rename low_gmadr/high_gmadr to mappable/non-mappable in PV INFO
structure
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|