summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2012-11-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: "This reverts a patch that causes regression in binding between HID devices and drivers during device unplug/replug cycle." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hidraw: put old deallocation mechanism in place
2012-11-01HID: hidraw: put old deallocation mechanism in placeJiri Kosina
This basically reverts commit 4fe9f8e203fda. It causes multiple problems, namely: - after rmmod/modprobe cycle of bus driver, the input is not claimed any more. This is likely because of misplaced hid_hw_close() - it causes memory corruption on hidraw_list As original patch author is not responding to requests to fix his patch, and the original deallocation mechanism is not exposing any problems, I am reverting back to it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "This contains fixes for two devices by Jiri Slaby and Xianhan Yu, new device IDs for MacBook Pro 10,2 from Dirk Hohndel and generic multitouch code fix from Alan Cox." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for the MacBook Pro 10,2 keyboard / touchpad HID: multitouch: fix maxcontacts problem on GeneralTouch HID: multitouch: put the case in the right switch statement HID: microsoft: fix invalid rdesc for 3k kbd
2012-10-31HID: Add support for the MacBook Pro 10,2 keyboard / touchpadDirk Hohndel
This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31HID: multitouch: fix maxcontacts problem on GeneralTouchXianhan Yu
Fix maxcontacts problem for PWT GeneralTouch multi-touchscreen. Our device didn't contain HID_DG_CONTACTMAX usage. This usage use to describe touchscreen's maxcontacts for hid-multitouch.c to get maxcontacts automatic. We fix the device that driver can get maxcontact from our device, hence it doesn't need .maxcontact=10. Now there is just one device class can fix all our PWT touchscreen. Signed-off-by: Xianhan Yu <aroundight77@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31HID: multitouch: put the case in the right switch statementAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31HID: microsoft: fix invalid rdesc for 3k kbdJiri Slaby
Microsoft Digital Media Keyboard 3000 has two interfaces, and the second one has a report descriptor with a bug. The second collection says: 05 01 -- global; usage page -- 01 -- Generic Desktop Controls 09 80 -- local; usage -- 80 -- System Control a1 01 -- main; collection -- 01 -- application 85 03 -- global; report ID -- 03 19 00 -- local; Usage Minimum -- 00 29 ff -- local; Usage Maximum -- ff 15 00 -- global; Logical Minimum -- 0 26 ff 00 -- global; Logical Maximum -- ff 81 00 -- main; input c0 -- main; End Collection I.e. it makes us think that there are all kinds of usages of system control. That the keyboard is a not only a keyboard, but also a joystick, mouse, gamepad, keypad, etc. The same as for the Wireless Desktop Receiver, this should be Physical Min/Max. So fix that appropriately. References: https://bugzilla.novell.com/show_bug.cgi?id=776834 Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-01Merge tag 'staging-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree update from Greg Kroah-Hartman: "Here is the big staging tree update for the 3.7-rc1 merge window. There are a few patches in here that are outside of the staging area, namely HID and IIO patches, but all of them have been acked by the relevant subsystem maintainers. The IIO stuff is still coming in through this tree as it hasn't entirely moved out of the staging tree, but is almost there. Other than that, there wa a ton of work on the comedi drivers to make them more readable and the correct style. Doing that removed a lot of code, but we added a new driver to the staging tree, so we didn't end up with a net reduction this time around: 662 files changed, 51649 insertions(+), 26582 deletions(-) All of these patches have been in the linux-next tree already. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits) staging: comedi: jr3_pci: fix iomem dereference staging: comedi: drivers: use comedi_fc.h cmdtest helpers Staging: winbond: usb_free_urb(NULL) is safe Staging: winbond: checkpatch cleanup Staging: winbond: Removed undesired spaces, lines and tabs Staging: winbond: Typo corrections in comments Staging: winbond: Changed c99 comments to c89 comments staging: r8712u: Do not queue cloned skb staging: comedi: ni_mio_common: always lock in ni_ai_poll() staging: comedi: s626: add FIXME comment staging: comedi: s626: don't dereference insn->data staging: comedi: s526: fix if() check in s526_gpct_winsn() staging: comedi: s626: cleanup comments in s626_initialize() staging: comedi: s626: remove clear of kzalloc'ed data staging: comedi: s626: remove 'WDInterval' from private data staging: comedi: s626: remove 'ChargeEnabled' from private data staging: comedi: s626: remove 'IsBoardRevA' comment staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND" staging: comedi: s626: remove 'allocatedBuf' from private data staging: comedi: s626: add final attach message ...
2012-10-01Merge branch 'multitouch' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-multitouch.c
2012-10-01Merge branch 'upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/usbhid/hid-quirks.c
2012-10-01Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', ↵Jiri Kosina
'uclogic', 'wacom' and 'wiimote' into for-linus
2012-10-01HID: hidraw: don't deallocate memory when it is in useRatan Nalumasu
When a device is unplugged, wait for all processes that have opened the device to close before deallocating the device. Signed-off-by: Ratan Nalumasu <ratan@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: picoLCD: optimize for inactive debugfsBruno Prémont
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when there is an active listener on debugfs for events. His change got lost while splitting hid_picolcd.c, restore it. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: multitouch: add support for GeneralTouch multi-touchscreenXianhan Yu
Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and modify the driver for new GeneralTouch PWT touchscreen. Signed-off-by: Xianhan Yu <aroundight77@gmail.com> Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: Add support for Sony PS3 BD Remote ControlDavid Dillow
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the BlueZ project's user space, but the code that handled it was recently removed as its functionality conflicted with a real HSP implementation and the mapping was thought to be better handled in the kernel. This is a port of the mapping logic from the fakehid driver by Marcel Holtmann to the in-kernel HID layer. We also add support for the Logitech Harmony Adapter for PS3, which emulates the BD Remote. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: keep dev_rdesc unmodified and use it for comparisonsKevin Daughtridge
The dev_rdesc member of the hid_device structure is meant to store the original report descriptor received from the device, but it is currently passed to any report_fixup method before it is copied to the rdesc member. This patch uses a temporary buffer to shield dev_rdesc from the side effects of many HID drivers' report_fixup implementations. usbhid's hid_post_reset checks the report descriptor currently returned by the device against a descriptor that may have been modified by a driver's report_fixup method. That leaves some devices nonfunctional after a resume, with a "reset_resume error 1" reported. This patch checks the new descriptor against the unmodified dev_rdesc instead and uses the original, instead of modified, report size. BugLink: http://bugs.launchpad.net/bugs/1049623 Signed-off-by: Kevin Daughtridge <kevin@kdau.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: lg4ff: Minor coding style fixes in lg4ff and hid-lgMichal Malý
Fixes a couple of minor coding style issues. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: hid-lg4ff: Set absolute axes parametes on DFPMichal Malý
The lg4ff driver doesn't fill the "input_absinfo" struct so it is left with default values. Applications with rely on information in this struct therefore do not work correctly with the wheel. Other Logitech wheels probably need this fix too, but again I do not have enough information to write it. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: hid-lg4ff: Adjust X axis input value accordingly to selected range.Michal Malý
Range limiting command for the Driving Force Pro wheel is only a FF_SPRING effect so that the wheel creates resistance when the user tries to turn it past the limit. It is however possible to overpower the FFB motors quite easily which leads to the X axis value exceeding the expected limit. This confuses games which dynamically adjust calibration using the highest/lowest min and max values reported by the wheel. Joydev device driver also doesn't take in account any changes in an axis range after the joystick device is created. This patch recalculates received ABS_X axis value so it is always in <0; 16383> range where 0 is the left limit and 16383 the right limit. Logitech driver for Windows does the same thing. As for any concerns about possible loss of precision, I compared a large set of raw/adjusted values generated by "mult_frac" to values returned by the Windows driver and I got a 100% match. Other Logitech wheels will probably need a similar fix, but I currently lack the information needed to write one. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: hid-lg4ff: Minor code cleanup to improve readabilityMichal Malý
This patch replaces all occurrences of "report->field[0]->value[n]" with just "value[n]" to get rid of the lengthy trains we have now. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: ntrig: change default value of logical/physical width/height to 1Wen-chien Jesse Sung
Since something will be divided by these variables in show_min_width()/show_min_height() and show_activate_width()/ show_activate_height(), a divided error would be triggered if they are zero. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-24HID: picoLCD: bounds check in dump_buff_as_hex()Bruno Prémont
Make sure we keep enough space for terminating NUL character after last newline. If we have too much data, replace last byte with '.'s to make overflow visible. Using hex_dump_to_buffer() is not interesting as it adds more overhead and does not append the trailing linefeed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-22HID: hid-sensor-hub: Fix sensor_hub_probe error handlingAxel Lin
Fix below issues: 1. In the case of goto err_close, hid_hw_stop(hdev) is called twice. Fix it. 2. If fails to allocate MFD device name, we also need to free all successfully allocated names in previous iterations. 3. In sensor_hub_remove(), Call hid_hw_close() before hid_hw_stop(). 4. Adjust unnecessary change lines for hid_err. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-22HID: hid-sensor-hub: Remove hdev->claimed settingAxel Lin
Current implementation of hid_hw_start() allows connect_mask to be 0. Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not necessary. Remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-22HID: Fix logitech-dj: missing Unifying device issueNestor Lopez Casado
This patch fixes an issue introduced after commit 4ea5454203d991ec ("HID: Fix race condition between driver core and ll-driver"). After that commit, hid-core discards any incoming packet that arrives while hid driver's probe function is being executed. This broke the enumeration process of hid-logitech-dj, that must receive control packets in-band with the mouse and keyboard packets. Discarding mouse or keyboard data at the very begining is usually fine, but it is not the case for control packets. This patch forces a re-enumeration of the paired devices when a packet arrives that comes from an unknown device. Based on a patch originally written by Benjamin Tissoires. Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-22HID: lenovo-tpkbd: Fix memory leak in tpkbd_remove_tp()Axel Lin
We need to kfree names for led_mute and led_micmute in tpkbd_remove_tp(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Bernhard Seibold <mail@bernhard-seibold.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-19Merge branch 'for-next' of git://github.com/rydberg/linux into from-henrikJiri Kosina
Pull Input and HID updates for 3.7 from Henrik Rydberg: "The tree contains input core changes, Acked by Dmitry, which substantially reduces the irqsoff latency for all input devices. It also contains MT changes which allows further memory reduction, speedup and hardware support in the HID Multitouch driver. Lastly, you get the conversion of the bcm5974 driver to MT-B, which due to the mixed dependency of the tree fits better here than anywhere else." Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-19HID: hid-multitouch: Add Flatfrog supportHenrik Rydberg
Add support for the Flatfrog Multitouch 3200 panel. This panel advertises some fields that it does not use, hence the new quirk. Cc: Pablo Cases <pablo.cases@flatfrog.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19HID: hid-multitouch: Fix contact count on 3M panelsHenrik Rydberg
Some devices report the number of contacts via the unreliable CONTACTCOUNT usage, rather than using the CONTACTMAX feature. Without this patch, the 3M devices are constrained to the default maximum of ten fingers. Cc: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19HID: hid-multitouch: Remove the redundant touch stateHenrik Rydberg
With the input_mt_sync_frame() function in place, there is no longer any need to keep the full touch state in the driver. This patch removes the slot state and replaces the lookup code with the input-mt equivalent. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19HID: hid-multitouch: Simplify setup and frame synchronizationHenrik Rydberg
With the input_configured() callback in place, the setup and frame synchronization can be simplified. The input device initialization is moved to mt_input_configured(), to make sure the full HID report has been seen. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19HID: Add an input configured notification callbackHenrik Rydberg
A hid device may create several input devices, and a driver may need to prepare or finalize the configuration per input device. Currently, there is no sane way for a driver to know when a device has been configured. This patch adds a callback providing that information. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: MT - Add flags to input_mt_init_slots()Henrik Rydberg
Preparing to move more repeated code into the mt core, add a flags argument to the input_mt_slots_init() function. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19HID: picolcd_core: Remove setting hdev->claimed before calling hid_hw_start()Axel Lin
Current implementation of hid_hw_start() allows connect_mask to be 0. Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not necessary. Remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-By: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-19HID: picoLCD: drop version check during probeBruno Prémont
Commit 4ea5454203d991ec85264f64f89ca8855fce69b0 [HID: Fix race condition between driver core and ll-driver] introduced new locking around probe/remove functions that prevents any report/reply from hardware to reach driver until it returned from probe. As such, the ask-reply way to checking picoLCD firmware version during probe is bound to timeout and let probe fail. Drop the check to let driver successfully probe again (until locking issues are resolved allowing to reinstate the check). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-19HID: wacom: Fix wacom_probe error handlingAxel Lin
OLEDs/LED are not critical for tablet functioning thus ignore OLED/LED initialisation failures. This patch does clean up all the sysfs attribute files in error paths. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-18HID: sensors: remove some unneeded checksDan Carpenter
"report_id" is unsigned so it's never less than zero. These checks can be removed without any problem. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-18HID: sensors: use GFP_ATOMIC under spinlockDan Carpenter
We're holding a spinlock here so we can't call kmalloc() with GFP_KERNEL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-18HID: sensors: fix up for mfd_add_devices() API changeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-18HID: wiimote: fix weight conversion error for values > 17kgFlorian Echtler
Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: roccat: conditional blacklisting of Roccat modulesStefan Achatz
Roccat devices are standard compatible, specific drivers are only needed for extended functionality. If Roccat drivers are not configured, hid-generic binds these devices now. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: wiimote: Parse calibration data of balance boardsFlorian Echtler
The raw pressure-data that is reported by balance-boards is pretty useless unless calibration data is applied. Therefore, we read the full calibration data on extension initialization and apply it to every reported data. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: wiimote: Add Nintendo Balance-Board supportDavid Herrmann
The Nintendo Balance-Board is a controller which behaves exactly like the Wii Remote but reports all its data through a special extension device. Hence, we can simply add the Balance-Board as extension device and we get full support for it. Tested-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: Fix return values in open_collection()Sachin Kamat
Return -ENOMEM instead of -1 if memory allocation fails. Return -EINVAL instead of -1 for stack overflow and underflow errors. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: lenovo-tpkbd: Remove unnecessary casts of void pointersAxel Lin
container_of() never returns NULL, thus also remove the NULL checking for it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: prodikeys: Remove unnecessary casts of void pointersAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: lg4ff: Remove unnecessary casts of void pointersAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17HID: lg: Remove unnecessary casts of void pointersAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17Merge 3.6-rc6 into staging-nextGreg Kroah-Hartman
This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>