summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2014-11-05iio: as3935: allocate correct iio_device sizeGeorge McCollister
Signed-off-by: George McCollister <george.mccollister@gmail.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05io: accel: kxcjk-1013: Fix iio_event_spec directionDaniel Baluta
Because IIO_EV_DIR_* are not bitmasks but enums, IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING is not equal with IIO_EV_DIR_EITHER. This could lead to potential misformatted sysfs attributes like: * in_accel_x_thresh_(null)_en * in_accel_x_thresh_(null)_period * in_accel_x_thresh_(null)_value or even memory corruption. Fixes: b4b491c083 (iio: accel: kxcjk-1013: Support threshold) Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not definedDan Murphy
Fix the compiler error when the CONFIG_PM_OPS flag is not set. drivers/iio/light/tsl4531.c:235:8: error: ‘tsl4531_suspend’ undeclared here (not in a function) drivers/iio/light/tsl4531.c:235:8: error: ‘tsl4531_resume’ undeclared here (not in a function) Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05iio: st_sensors: Fix buffer copyRobin van der Gracht
Use byte_for_channel as iterator to properly initialize the buffer. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: <Stable@vger.kernel.org>
2014-09-22staging: iio: fix up merge errorGreg Kroah-Hartman
Fix up a build merge error in drivers/iio/accel/bma180.c that I caused. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22Merge 3.17-rc6 into staging-next.Greg Kroah-Hartman
We want the fixes in there, and it resolves a merge issue with drivers/iio/accel/bma180.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-14iio:bma180: Add BMA250 chip supportPeter Meerwald
the BMA250 has only 10-bit resolution; while the data readout registers have identical layout, the configuration is completely different compared to the BMA180 datasheet: http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/BST-BMA250-DS002-05.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Implement _available sysfs attribute dynamicallyPeter Meerwald
makes it easier to add more chip variants and removes redundancy: scales and frequencies are now stated just once Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Prepare for accelerometer channels with different resolutionsPeter Meerwald
allow to specify channels resolution and compute shift assuming 16-bit registers and MSB allocation Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Introduce part-specific _config() and disable() codePeter Meerwald
move part of bma180_init() to bma180_config() (split initialization and configuration code); configuration is heavily chip-specific Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Introduce part_info to differentiate further chip variantsPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Drop _update_scan_mode()Peter Meerwald
statically allocate maximum size Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Expose temperature channelPeter Meerwald
8-bit signed; 0 LSB @ 24 °C, 0.5 °C per LSB Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Use bool instead of int for statePeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Rename BMA_180 to BMA180_Peter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Prefix remaining tables and functions with bma18_Peter Meerwald
and minor cleanups Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:bma180: Enable use of device without IRQPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: gyro: bmi055 gyro sensor driverIrina Tirdea
Add support for the BMI055 gyroscope sensor. BMI055 is a package consisting of an acceleration sensor and a gyroscope. This patch adds support for the gyroscope only. Spec downloaded from: http://ae-bst.resource.bosch.com/media/products/dokumente/bmi055/BST-BMI055-DS000-06.pdf The BMI055 gyroscope uses the same register definition as BMG160, but does not specify a temp register. However, the temp register seems to be working in the same way as for BMG160, so this patch does not remove the temp channel for BMI055. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: accel: kxcjk-1013: Fix defined but unused warningDaniel Baluta
Noticed when compiling with CONFIG_PM_RUNTIME not set: kxcjk-1013.c: warning: ‘kxcjk1013_get_startup_times’ defined but not used [-Wunused-function] Introduced by commit 124e1b1d (iio: accel: kxcjk-1013: support runtime pm). Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: magn: ak8975: fix unnecessary casting between char* and const char*Irina Tirdea
Use const char* instead of casting const char* to char*. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: gyro: bmg160: only set power state if PM_RUNTIME is definedIrina Tirdea
When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend, which is not implemented (wil return -ENOSYS). Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio:magnetometer: bugfix magnetometers gain valuesDenis CIOCCA
This patch fix gains values. The first driver was designed using engineering samples, in mass production the values are changed. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: adc: at91: don't use the last converted data registerLudovic Desroches
If touchscreen mode is enabled and a conversion is requested on another channel, the result in the last converted data register can be a touchscreen relative value. Starting a conversion involves to do a conversion for all active channel. It starts with ADC channels and ends with touchscreen channels. Then if ADC_LCD register is not read quickly, its content may be a touchscreen conversion. To remove this temporal constraint, the conversion value is taken from the channel data register. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: adc: xilinx-xadc: assign auxiliary channels address correctlySubbaraya Sundeep Bhatta
This patch fixes incorrect logic for assigning address to auxiliary channels of xilinx xadc. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14iio: accel: kxcjk-1013: add support for kxtj2-1009Daniel Baluta
This patch adds support for KXTJ2-1009 3-axis acceleromenter sensor. KXTJ2-1009 uses the same register definitions as KXCJK-1013. The specification for KXTJ2-1009 can be downloaded from: http://www.kionix.com/sites/default/files/KXTJ2-1009%20Specifications%20Rev%204.pdf Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-13iio: accel: BMC150: add support for other Bosch chipsLaurentiu Palcu
The following chips are either similar or have only the resolution different. Hence, change this driver to support these chips too: BMI055 - combo chip (accelerometer part is identical to BMC150's) BMA255 - identical to BMC150's accelerometer BMA222E - 8 bit resolution BMA250E - 10 bit resolution BMA280 - 14 bit resolution Additionally: * add bmc150_accel_match_acpi_device() function to check that the device has been enumerated through ACPI; * rename bmc150_accel_acpi_gpio_probe() to bmc150_accel_gpio_probe() since the ACPI matching has been moved to the new function. Also, this will allow for the GPIO matching to be done against a device tree too, not only ACPI tree; * rename bmc150_scale_info struct member 'range' to 'reg_range' to be consistent with the naming convention used elsewhere in the driver and declare it u8, instead of int; * change CONFIG description to list all supported chips; Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-10iio: Add Dyna-Image AL3320A ambient light sensor driverDaniel Baluta
Minimal implementation. This driver provides raw illuminance readings. This is based on drivers/hwmon/al3320.c (*) driver from msm tree written by Tsechih Lin <Tsechih_Lin@asus.com> * https://android.googlesource.com/kernel/msm.git Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: accel: kxcjk-1013: add support for kxcj9-1008Daniel Baluta
This patch adds support for KXCJ9-1008 3-axis acceleromenter sensor. KXCJ9-1008 uses the same register definitions as KXCJK-1013. The specification for KXCJ9-1008 can be downloaded from: http://www.kionix.com/sites/default/files/KXCJ9-1008%20Specifications%20Rev%205.pdf Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: accel: BMC150: fix issues when CONFIG_PM_RUNTIME is not setLaurentiu Palcu
When CONFIG_PM_RUNTIME is not set, the following issues are seen: * warning message at compilation time: warning: 'bmc150_accel_get_startup_times' defined but not used [-Wunused-function] * bmc150_accel_set_power_state() will always fail and reading the accelerometer data is impossible; This occurs because of the call to pm_runtime_put_autosuspend calls __pm_runtime_suspend which returns -ENOSYS. This commit fixes these. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: accel: BMC150: fix scale value for 16GLaurentiu Palcu
According to documentation ([1] - page 27), the range for 16G is 7.81mg/LSB. Converted to SI, this is: 7.81 * 10^-3 * 9.80665 m/s^2 / LSB = 0.0765899365 m/s^2 / LSB [1] http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: sensors-core: st: Check st_sensors_set_drdy_int_pin()'s return valueLee Jones
Value from st_sensors_set_drdy_int_pin() is assigned to err here, but that stored value is not used before it is overwritten. To fix this we're enforcing a check on st_sensors_set_drdy_int_pin()'s return value and if it's an error, we're returning right away. Cc: jic23@kernel.org Cc: linux-iio@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: adc: at91: make the function handle_adc_eoc_trigger() staticJosh Wu
The handle_adc_eoc_trigger() in only used in at91_adc.c. So make it static. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: adc: rockchip_saradc: remove unused variable in probeHeiko Stübner
The rate variable in the probe function of the saradc is a remnant of a previous patch iteration. It is unused and thus produces a compile time warning. Therefore remove it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30iio: imu: inv_mpu6050: Remove casting the return value which is a void pointerJingoo Han
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26iio: remove .owner field for driver using module_platform_driverSanjeev Sharma
This patch removes the .owner field for drivers which use the platform_driver_register api because this is overriden in _platform_driver_register. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26iio: accel: kxcjk-1013: Support thresholdsSrinivas Pandruvada
This chip has a motion detect capability. Using IIO events to specify thresholds and pushing events. In addition a new trigger of type any-motion is added, which pushes data to buffer only when there is any movement. Change list: Comments addressed for Re: [PATCH 5/6] iio: accel: kxcjk-1013: Support thresholds Date: 07/20/2014 - Both motion detect and data ready can be enabled together - Sending RISING/FALLING events based on int status - Separate interrupt configuration for data ready and motion detect Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26io: accel: kxcjk1013: Remove redundant assignmentDaniel Baluta
data->range is already set by kxcjk1013_set_range. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26iio:gyro:bmg160 Gyro Sensor driverSrinivas Pandruvada
This change implements support for BMG160 Gyro sensor. Although chip has several advanced features, this change implements minimum set required for using gyro sensor. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-25iio: inv_mpu6050: Fix indio_dev->trig assignmentSrinivas Pandruvada
This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-25iio: gyro: itg3200: Fix indio_dev->trig assignmentSrinivas Pandruvada
This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-25iio: st_sensors: Fix indio_dev->trig assignmentSrinivas Pandruvada
This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-25iio: hid_sensor_hub: Fix indio_dev->trig assignmentSrinivas Pandruvada
This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-25iio: adc: ad_sigma_delta: Fix indio_dev->trig assignmentSrinivas Pandruvada
This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-25iio: accel: bma180: Fix indio_dev->trig assignmentSrinivas Pandruvada
This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-25Merge tag 'iio-for-3.18a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-next Jonathan writes: 1st round of new IIO drivers, functionality and cleanups for the 3.18 cycle. Maintainer Updates * Add 3 designated reviewers for IIO. Lars, Peter and Hartmut have been actively reviewing a lot of patches for a while now so this reflects the status quo. These three are probably the only reason I keep my head above the water! New drivers and device support * max5821 DAC * Rockchip SARADC * TI ADC128S052 ADC * BMC150 Accelerometer * exynos ADC driver gains support for s3c24xx and s3c64xx parts. * kxcjk-1013 gainst range control and runtime PM support to drive down it's power usage. Driver removals * Drop ad5930, ad99850, ad9852, ad9910 and ad9951 drivers on the simple basis that they drivers just provided a register write function with no compliant user space ABI whatsoever. Much better to drop them and start again for these in the fullness of time. Core Enhancements * Join together neighbouring elements in the demux units that feeds the binary interfaces. This cuts down on the number of individual copies needed when splitting out individual channels from the incoming channel scans. * Other demux related cleanups such as using roundup instead of a local implementation. Cleanups * Drop an unnecessary double setting of the owner field in xilinx adc. * Some more patches to use managed (devm) interfaces to cut down on complexity of removal code. * adis16060 coding style fixlets. * Fix some incorrect error returns in the Xilinx ADC driver. * Coding style fixlets for various accelerometer drivers. * Some sparse warning fixes to do with endianness and sign of variables. * Fix an incorrect and entirely pointless use of sizeof on a dynamic pointer in hid-sensor-magn-3d by dropping the relevant code.
2014-08-25iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_nameJohannes Pointner
Fixes: a2c12493ed7e ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs') which improperly assumes that of_iio_channel_get_by_name must always return NULL and thus now hides -EPROBE_DEFER. Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-08-19iio: adc: xilinx: Remove .owner field for driverMichal Simek
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-08iio:buffer: Wrong sized allocation of demux table elements.Jonathan Cameron
The size of the allocation is currently set to the size of the pointer rather than the structure we should actually be allocating. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reported-by: kbuild@01.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-08-07iio: adc: exynos_adc: Add support for s3c24xx ADCChanwoo Choi
This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx is alomost same as ADCv1. But, There are a little difference as following: - ADCMUX register address - ADCDAT mask (10 bit or 12 bit ADC resolution according to SoC version) - s3c24xx/s3c64xx has not included ADC_PHY enable register Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07iio: adc: exynos_adc: add support for s3c64xx adcArnd Bergmann
The ADC in s3c64xx is almost the same as exynosv1, but has a different 'select' method. Adding this here will be helpful to move over the existing s3c64xx platform from the legacy plat-samsung/adc driver to the new exynos-adc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>