summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2014-04-03RDMA/ocrdma: EQ full catastrophe avoidanceDevesh Sharma
Stale entries in the CQ being destroyed causes hardware to generate EQEs indefinitely for a given CQ. Thus causing uncontrolled execution of irq_handler. This patch fixes this using following sementics: * irq_handler will ring EQ doorbell atleast once and implement budgeting scheme. * cq_destroy will count number of valid entires during destroy and ring cq-db so that hardware does not generate uncontrolled EQE. * cq_destroy will synchronize with last running irq_handler instance. * arm_cq will always defer arming CQ till poll_cq, except for the first arm_cq call. * poll_cq will always ring cq-db with arm=SET if arm_cq was called prior to enter poll_cq. * poll_cq will always ring cq-db with arm=UNSET if arm_cq was not called prior to enter poll_cq. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-17RDMA/ocrdma: Fix compiler warningPrarit Bhargava
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function ‘_ocrdma_modify_qp’: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1299:31: error: ‘old_qps’ may be used uninitialized in this function [-Werror=maybe-uninitialized] status = ocrdma_mbx_modify_qp(dev, qp, attr, attr_mask, old_qps); ocrdma_mbx_modify_qp() (and subsequent calls) doesn't appear to use old_qps so it doesn't need to be passed on. Removing the variable results in the warning going away. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Devesh Sharma (Devesh.sharma@emulex.com) Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', ↵Roland Dreier
'ocrdma', 'qib' and 'usnic' into for-next
2014-02-14RDMA/ocrdma: Fix load time panic during GID table initDevesh Sharma
We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14RDMA/ocrdma: Fix traffic class shiftDevesh Sharma
Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/usnic: Fix smatch endianness errorUpinder Malhi
Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/mlx5: Remove dependency on X86Eli Cohen
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/qib: Add missing serdes init sequenceMike Marciniszyn
Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13RDMA/cxgb4: Add missing neigh_release in LE-Workaround pathKumar Sanghvi
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB: Report using RoCE IP based gids in port capsMoni Shoua
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Build the port IBoE GID table properly under bondingMoni Shoua
When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Do IBoE GID table resets per-portMoni Shoua
The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Do IBoE locking earlier when initializing the GID tableMoni Shoua
Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Move rtnl locking to the right placeMoni Shoua
On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Make sure GID index 0 is always occupiedMoni Shoua
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only deviceMatan Barak
When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-12RDMA/amso1100: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-12RDMA/nes: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-07IB/mlx5: Don't set "block multicast loopback" capabilityEli Cohen
Currently Connect-IB does not support blocking multicast loopback, so don't set IB_DEVICE_BLOCK_MULTICAST_LOOPBACK in the device caps. Reported by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-07IB/mlx5: Fix binary compatibility with libmlx5Eli Cohen
Commit c1be5232d21d ("Fix micro UAR allocator") broke binary compatibility between libmlx5 and mlx5_ib since it defines a different value to the number of micro UARs per page, leading to wrong calculation in libmlx5. This patch defines struct mlx5_ib_alloc_ucontext_req_v2 as an extension to struct mlx5_ib_alloc_ucontext_req. The extended size is determined in mlx5_ib_alloc_ucontext() and in case of old library we use uuarn 0 which works fine -- this is acheived due to create_user_qp() falling back from high to medium then to low class where low class will return 0. For new libraries we use the more sophisticated allocation algorithm. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-07IB/mlx5: Fix RC transport send queue overhead computationEli Cohen
Fix the RC QPs send queue overhead computation to take into account two additional segments in the WQE which are needed for registration operations. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23Merge branch 'ip-roce' into for-nextRoland Dreier
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-23Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-23IB/mlx5: Verify reserved fields are clearedEli Cohen
Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Allow creation of QPs with zero-length work queuesEli Cohen
The current code attmepts to call ib_umem_get() even if the length is zero, which causes a failure. Since the spec allows zero length work queues, change the code so we don't call ib_umem_get() in those cases. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Add support for resize CQEli Cohen
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Implement modify CQEli Cohen
Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Make sure doorbell record is visible before doorbellEli Cohen
Put a wmb() to make sure the doorbell record is visible to the HCA before we hit doorbell. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23RDMA/nes: Slight optimization of Ethernet address compareDing Tianhong
Use the possibly more efficient ether_addr_equal() instead of memcmp(). Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/qib: Fix QP check when looping back to/from QP1Ira Weiny
The GSI QP type is compatible with and should be allowed to send data to/from any UD QP. This was found when testing ibacm on the same node as an SA. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23RDMA/cxgb4: Fix gcc warning on 32-bit archPaul Bolle
Building mem.o for 32 bits x86 triggers a GCC warning: drivers/infiniband/hw/cxgb4/mem.c: In function '_c4iw_write_mem_dma_aligned': drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Silence that warning by casting "&wr_wait" to unsigned long before casting it to __be64. That's what _c4iw_write_mem_inline() already does. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/usnic: Remove unused includes of <linux/version.h>Wei Yongjun
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23RDMA/amso1100: Add check if cache memory was allocated before freeing itSvetlana Mavrina
There is a path in handle_vq() where kmem_cache_free() can be called with pointer to a local variable. It can happen if vq_repbuf_alloc() failed to allocate memory from cache and req is NULL. The patch adds check if cache memory was allocated before freeing it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Svetlana Mavrina <another.karnil@gmail.com> Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21IB/usnic: Use GFP_ATOMIC under spinlockDan Carpenter
This is called from qp_grp_and_vf_bind() and we are holding the vf->lock so the allocation can't sleep. Fixes: e3cf00d0a87f ('IB/usnic: Add Cisco VIC low-level hardware driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/mlx4: Use IS_ENABLED(CONFIG_IPV6)Roland Dreier
...instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19RDMA/ocrdma: Add dependency on INETRoland Dreier
Now that ocrdma supports IP-based addressing, we need to depend on INET, since ocrdma registers itself for net device events. Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19RDMA/ocrdma: Move ocrdma_inetaddr_event outside of "#if CONFIG_IPV6"Roland Dreier
This fixes the build if IPV6 isn't enabled. Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/mlx4: Add dependency INETMatan Barak
Since mlx4_ib supports IP based addressing, a dependency on INET needs to be added, since mlx4_ib registers itself for net device events. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19RDMA/ocrdma: Populate GID table with IP based gidsMoni Shoua
This patch is similar in spirit to the "IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID table" patch. Changes to inet4 and inet6 addresses for the host are monitored and if the address is associated with an ocrdma device then a gid is added or deleted from the device's gid table. The gid format will be a IPv4 to IPv6 mapped or the IPv6 address. Cc: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19RDMA/ocrdma: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua
This patch is similar in spirit to the "IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressing". It handles the fact that IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. When building an address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Cc: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua
IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. Therefore, we need to extract them from the CQE and place them in struct ib_wc (to be used for cases were they were taken from the gid). Also, when modifying a QP or building address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID tableMoni Shoua
Currently, the mlx4 driver set IBoE (RoCE) gids to encode related Ethernet netdevice interface MAC address and possibly VLAN id. Change this scheme such that gids encode interface IP addresses (both IP4 and IPv6). This requires learning the IP addresses which are of use by a netdevice associated with the HCA port, formatting them to gids and adding them to the port gid table. Furthermore, events of add and delete address are caught to maintain the gid table accordingly. Associated IP addresses may belong to a master of an Ethernet netdevice on top of that port so this should be considered when building and maintaining the gid table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/mlx4: Fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/usnic: Remove unused variable in usnic_debugfs_exit()Wei Yongjun
The variable qp_grp is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/usnic: Set userspace/kernel ABI ver to 4Upinder Malhi
usNIC userspace/kernel ABI should be set to 4 instead of 3. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/usnic: Advertise usNIC devices as RDMA_NODE_USNIC_UDPUpinder Malhi
usNIC default transport is UDP. Hence, advertise RDMA_NODE_USNIC_UDP by default for usNIC devices. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/usnic: Add dependency on CONFIG_INETUpinder Malhi
usNIC needs inet notifiers to function correctly, so add a Kconfig dependency on CONFIG_INET. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/usnic: Fix endianness-related warningsUpinder Malhi
Fix sparse endianness related warnings. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/core: Ethernet L2 attributes in verbs/cm structuresMatan Barak
This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/mlx4: Add support for steerable IB UD QPsMatan Barak
This patch adds support for steerable (NETIF) QP creation. When we create the device, we allocate a range of steerable QPs. Afterward when a QP is created with the NETIF flag, it's allocated from this range. Allocation is managed by bitmap allocator. Internal steering rules for those QPs is automatically generated on their creation. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v0.10.2 at 2024-10-06 18:25:33 (GMT)