summaryrefslogtreecommitdiff
path: root/drivers/input/joystick
AgeCommit message (Collapse)Author
2016-01-27Input: xpad - remove unused functionArnd Bergmann
There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cae705baa40b ("Input: xpad - re-send LED command on present event") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-22Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.5 merge window.
2016-01-13Input: xpad - correct xbox one pad device namePavel Rojtberg
Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-12Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 4.5 merge window.
2016-01-04Input: xpad - use LED API when identifying wireless controllersDmitry Torokhov
When lighting up the segment identifying wireless controller, Instead of sending command directly to the controller, let's do it via LED API (usinf led_set_brightness) so that LED object state is in sync with controller state and we'll light up the correct segment on resume as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - workaround dead irq_out after suspend/ resumePavel Rojtberg
The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - update Xbox One Force Feedback SupportPierre-Loup A. Griffais
There's apparently a serial number woven into both input and output packets; neglecting to specify a valid serial number causes the controller to ignore the rumble packets. The scale of the rumble was also apparently halved in the packets. The initialization packet had to be changed to allow force feedback to work. see https://github.com/paroj/xpad/issues/7 for details. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - correctly handle concurrent LED and FF requestsPavel Rojtberg
Track the status of the irq_out URB to prevent submission iof new requests while current one is active. Failure to do so results in the "URB submitted while active" warning/stack trace. Store pending brightness and FF effect in the driver structure and replace it with the latest requests until the device is ready to process next request. Alternate serving LED vs FF requests to make sure one does not starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer [2]. [1]: http://www.spinics.net/lists/linux-input/msg40708.html [2]: http://www.spinics.net/lists/linux-input/msg31450.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: xpad - handle "present" and "gone" correctlyPierre-Loup A. Griffais
Handle the "a new device is present" message properly by dynamically creating the input device at this point in time. This means we now do not "preallocate" all 4 devices when a single wireless base station is seen. This requires a workqueue as we are in interrupt context when we learn about this. Also properly disconnect any devices that we are told are removed. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: xpad - remove spurious events of wireless xpad 360 controllerClement Calmels
When powering up a wireless xbox 360 controller, some wrong joystick events are generated. It is annoying because, for example, it makes unwanted moves in Steam big picture mode's menu. When my controller is powering up, this packet is received by the driver: 00000000: 00 0f 00 f0 00 cc ff cf 8b e0 86 6a 68 f0 00 20 ...........jh.. 00000010: 13 e3 20 1d 30 03 40 01 50 01 ff ff .. .0.@.P... According to xboxdrv userspace driver source code, this packet is only dumping a serial id and should not be interpreted as joystick events. This issue can be easily seen with jstest: $ jstest --event /dev/input/js0 This patch only adds a way to filter out this "serial" packet and as a result it removes the spurous events. Signed-off-by: Clement Calmels <clement.calmels@free.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: walkera0701 - clear unused function pointersSudip Mukherjee
walkera0701_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 221bcb24c653 ("Input: walkera0701 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: turbografx - clear unused function pointersSudip Mukherjee
tgfx_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: gamecon - clear unused function pointersSudip Mukherjee
gc_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: db9 - clear unused function pointersSudip Mukherjee
db9_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-09remove abs64()Andrew Morton
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-19Input: xpad - fix clash of presence handling with LED settingPavel Rojtberg
Do not call xpad_identify_controller at init with wireless devices: it conflicts with the already sent presence packet and will be called by xpad360w_process_packet as needed anyway. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - query wireless controller state at initPavel Rojtberg
When we initialize the driver/device, we really don't know how many controllers are connected. So send a "query presence" command to the base-station. (Command discovered by Zachary Lund) Presence packet taken from: https://github.com/computerquip/xpad5 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - move the input device creation to a new functionPierre-Loup A. Griffais
To allow us to later create / destroy the input device from the urb callback, we need to initialize/ deinitialize the input device from a separate function. So pull that logic out now to make later patches more "obvious" as to what they do. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - x360w: report dpad as buttons and axesPavel Rojtberg
as discussed here[0], x360w is the only pad that maps dpad_to_button. This is bad for downstream developers as they have to differ between x360 and x360w which is not intuitive. This patch implements the suggested solution of exposing the dpad both as axes and as buttons. This retains backward compatibility with software already dealing with the difference while makes new software work as expected across x360/ x360w pads. [0] http://www.spinics.net/lists/linux-input/msg34421.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - factor out URB submission in xpad_play_effectPavel Rojtberg
Move submission logic to a single point at the end of the function. This makes it easy to add locking/ queuing code later on. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - remove needless bulk out URB used for LED setupPavel Rojtberg
This code was probably wrong ever since and is redundant with xpad_send_led_command. Both try to send a similar command to the xbox360 controller. However xpad_send_led_command correctly uses the pad_nr instead of bInterfaceNumber to select the led and re-uses the irq_out URB instead of creating a new one. Note that this change only affects the two supported wireless controllers. Tested using the xbox360 wireless controller (PC). Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - use ida() for finding the pad_nrPavel Rojtberg
The pad_nr corresponds to the lit up LED on the controller. Therefore there should be no gaps when enumerating. Currently a LED is only re-assigned after a controller is re-connected 4 times. This patch uses ida to track connected pads - this way we can re-assign freed up pad number immediately. Consider the following case: 1. pad A is connected and gets pad_nr = 0 2. pad B is connected and gets pad_nr = 1 3. pad A is disconnected 4. pad A is connected again using ida_simple_get() controller A now correctly gets pad_nr = 0 again. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - clarify LED enumerationPavel Rojtberg
Rename led_no -> pad_nr: the number stored there is not the LED number - it gets translated later on to a LED number in xpad_identify_controller; Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - fix Razer Atrox Arcade Stick button mappingDario Scarpa
The "Razer Atrox Arcade Stick" features 10 buttons, and two of them (LT/RT) don't work properly. Change its definition in xpad_device[] (mapping field) to fix. Signed-off-by: Dario Scarpa <dario.scarpa@duskzone.it> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - add Covert Forces edition of the Xbox One controllerErik Lundgren
It is identical to the Xbox One controller but has a different product ID. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Merge tag 'v4.3-rc4' into nextDmitry Torokhov
Merge with mainline to sync up with changes to parkbd driver.
2015-10-06Input: turbografx - store object in correct indexSudip Mukherjee
The variable i is used to check the port to attach to and we are supposed to save the reference of struct tgfx in the location given by tgfx_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Input: gamecon - store object at correct indexSudip Mukherjee
The variable i is used to check the port to attach to and we are supposed to save the reference of struct gc in the location given by gc_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Input: db9 - store object at correct indexSudip Mukherjee
The variable i is used to check the port to attach to and we are supposed to save the reference of struct db9 in the location given by db9_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. While at it mark db9_base[i] as NULL after it is freed. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for two recent regressions (in Synaptics PS/2 and uinput drivers) and some more driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - fix handling of disabling gesture mode" Input: psmouse - fix data race in __ps2_command Input: elan_i2c - add all valid ic type for i2c/smbus Input: zhenhua - ensure we have BITREVERSE Input: omap4-keypad - fix memory leak Input: serio - fix blocking of parport Input: uinput - fix crash when using ABS events Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF Input: elan_i2c - add ic type 0x03 Input: elan_i2c - don't require known iap version Input: imx6ul_tsc - fix controller name Input: imx6ul_tsc - use the preferred method for kzalloc() Input: imx6ul_tsc - check for negative return value Input: imx6ul_tsc - propagate the errors Input: walkera0701 - fix abs() calculations on 64 bit values Input: mms114 - remove unneded semicolons Input: pm8941-pwrkey - remove unneded semicolon Input: fix typo in MT documentation Input: cyapa - fix address of Gen3 devices in device tree documentation
2015-10-02drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSEAndrew Morton
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Cc: Fengguang Wu <fengguang.wu@gmail.com> Cc: yalin wang <yalin.wang2010@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-29Merge tag 'v4.3-rc3' into nextDmitry Torokhov
Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062 OnKey driver.
2015-09-29Input: walkera0701 - use parallel port device modelSudip Mukherjee
Modify walkera0701 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: turbografx - use parallel port device modelSudip Mukherjee
Modify turbografx driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: gamecon - use parallel port device modelSudip Mukherjee
Modify gamecon driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: zhenhua - ensure we have BITREVERSEAndrew Morton
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: db9 - use parallel port device modelSudip Mukherjee
Modify db9 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Tested-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-19Input: walkera0701 - fix abs() calculations on 64 bit valuesDmitry Torokhov
abs() function can not be used with 64 bit values, so let's switch to abs64(). From include/linux/kernel.h: /* * abs() handles unsigned and signed longs, ints, shorts and chars. * For all input types abs() returns a signed long. * abs() should not be used for 64-bit types (s64, u64, long long) * - use abs64() for those. */ Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Drivers, drivers, drivers... No interesting input core changes this time" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits) Input: elan_i2c - use iap_version to get firmware information Input: max8997_haptic - fix module alias Input: elan_i2c - fix typos for validpage_count Input: psmouse - add small delay for IBM trackpoint pass-through mode Input: synaptics - fix handling of disabling gesture mode Input: elan_i2c - enable ELAN0100 acpi panels Input: gpio-keys - report error when disabling unsupported key Input: sur40 - fix error return code Input: sentelic - silence some underflow warnings Input: zhenhua - switch to using bitrev8() Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency Input: cap11xx - add LED support Input: elants_i2c - fix for devm_gpiod_get API change Input: elan_i2c - enable asynchronous probing Input: elants_i2c - enable asynchronous probing Input: elants_i2c - wire up regulator support Input: do not emit unneeded EV_SYN when suspending Input: elants_i2c - disable idle mode before updating firmware MAINTAINERS: Add maintainer for atmel_mxt_ts Input: atmel_mxt_ts - remove warning on zero T44 count ...
2015-09-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 4.3 merge window.
2015-08-21Input: zhenhua - switch to using bitrev8()Yalin Wang
Instead of custom zhenhua_bitreverse() let's use generic bitrev8(). Signed-off-by: Yalin Wang <yalin.wang2010@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-18Merge branch 'x86/urgent' into x86/asm to fix up conflicts and to pick up fixesIngo Molnar
Conflicts: arch/x86/entry/entry_64_compat.S arch/x86/math-emu/get_address.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-03Input: turbografx - fix potential out of bound accessDmitry Torokhov
Patch 17dd3f0f7aa7: "[PATCH] drivers/input/joystick: convert to dynamic input_dev allocation" from Sep 15, 2005, leads to the following static checker warning: drivers/input/joystick/turbografx.c:235 tgfx_probe() error: buffer overflow 'tgfx_buttons' 5 <= 5 drivers/input/joystick/turbografx.c 195 for (i = 0; i < n_devs; i++) { 196 if (n_buttons[i] < 1) 197 continue; 198 199 if (n_buttons[i] > 6) { ^^^^^^^^^^^^^^^^ Possibly off by one. >= 6. Let's change the upper value to ARRAY_SIZE(tgfx_buttons) to ensure we do not reach past the end of the array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-06x86/asm/tsc: Rename native_read_tsc() to rdtsc()Andy Lutomirski
Now that there is no paravirt TSC, the "native" is inappropriate. The function does RDTSC, so give it the obvious name: rdtsc(). Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/fd43e16281991f096c1e4d21574d9e1402c62d39.1434501121.git.luto@kernel.org [ Ported it to v4.2-rc1. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/asm/tsc, input/joystick/analog: Switch from rdtscl() to native_read_tsc()Andy Lutomirski
This timing code is hideous, and this doesn't help. It gets rid of one of the last users of rdtscl(), though. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/90d19b3cea0e05ca6f333d1598daa38afb993260.1434501121.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-22Input: xpad - re-send LED command on present eventPavel Rojtberg
The controller only receives commands when its present. So for the correct LED to be lit the LED command has to be sent on the present event. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-22Input: xpad - set the LEDs properly on XBox Wireless controllersPierre-Loup A. Griffais
Based on Patch by Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>: Add the logic to set the LEDs on XBox Wireless controllers. Command sequence found by sniffing the Windows data stream when plugging the device in. Updated based on comments on linux-input: unify codepaths in xpad_send_led_command for wired/ wireless controller. Also document command values for clarification. All values tested on Xbox 360 Wireless Controller. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-15Input: xpad - add rumble support for Xbox One controllerMing-ting Yao Wei
This adds rumble support for Xbox One controller by sending continuous rumble command. Trigger button rumbling is not yet implemented. Signed-off-by: Ming-ting Yao Wei <mwei@lxde.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-12Input: adi - remove an unnecessary checkMarkus Elfring
The input_free_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-16Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 3.19.