Age | Commit message (Collapse) | Author |
|
amd_iommu_pasid_bind -> amd_iommu_bind_pasid
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The references to the device state are not dropped
everywhere. This might cause a dead-lock in
amd_iommu_free_device(). Fix it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
All calls to this call-back are wrapped with
mmu_notifer_invalidate_range_start()/end(), making this
notifier pretty useless, so remove it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
With calling te mmu_notifier_register function we hold a
reference to the mm_struct that needs to be released in
mmu_notifier_unregister. This is true even if the notifier
was already unregistered from exit_mmap and the .release
call-back has already run.
So make sure we call mmu_notifier_unregister unconditionally
in amd_iommu_unbind_pasid.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
On the error path of amd_iommu_bind_pasid() we call
mmu_notifier_unregister() for cleanup. This calls
mn_release() which calls the users inv_ctx_cb function if
one is available. Since the pasid is not set up yet there is
nothing the user can to tear down in this call-back. So
don't call inv_ctx_cb on the error path of
amd_iommu_unbind_pasid() and make life of the users simpler.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
Since we are only caring about the lifetime of the mm_struct
and not the task we can't safely keep a reference to it. The
reference is also not needed anymore, so remove that code
entirely.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
With mmu_notifiers we don't need to hold a reference to the
mm_struct during the time the pasid is bound to a device. We
can rely on the .mn_release call back to inform us when the
mm_struct goes away.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
This is used to signal the ppr_notifer function that no more
faults should be processes on this pasid_state. This way we
can keep the pasid_state safely in the state-table so that
it can be freed in the amd_iommu_unbind_pasid() function.
This allows us to not hold a reference to the mm_struct
during the whole pasid-binding-time.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
In case we are not able to allocate a fault structure a
reference to the pasid_state will be leaked. Fix that by
dropping the reference in the error path in case we hold
one.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
Unbind_pasid is only called from mn_release which already
has the pasid_state. Use this to simplify the unbind_pasid
path and get rid of __unbind_pasid.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
The mmu_notifier state is part of pasid_state so it can't be
freed in the mn_release path. Free the pasid_state after
mmu_notifer_unregister has completed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
This function is called only in the mn_release() path, so
there is no need to unregister the mmu_notifer here.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
|
|
Fix typo in a comment.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The pasid wasn't properly initialized before caling to invalid PPR calback
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit e79df31 introduced mmu_notifer_count to protect
against parallel mmu_notifier_invalidate_range_start/end
calls. The patch left a small race condition when
invalidate_range_end() races with a new
invalidate_range_start() the empty page-table may be
reverted leading to stale TLB entries in the IOMMU and the
device. Use a spin_lock instead of just an atomic variable
to eliminate the race.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add a counter to the pasid_state so that we do not restore
the original page-table before all invalidate_range_start
to invalidate_range_end sections have finished.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This list was only used for the task_exit notifier function.
Now that it is gone we can remove it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
|
|
Since mmu_notifier call-backs can sleep (because they use
SRCU now) we can use them to tear down PASID mappings. This
allows us to finally remove the hack to use the task_exit
notifier from oprofile to get notified when a process dies.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
|
|
The state_table consumes 512kb of memory and is only sparsly
populated. Convert it into a list to save memory. There
should be no measurable performance impact.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
|
|
This is a preparation for converting the state_table into a
state_list.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>
|
|
get_user_pages requires caller to hold a read lock on mmap_sem.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"The most important part of these updates is the IOMMU groups code
enhancement written by Alex Williamson. It abstracts the problem that
a given hardware IOMMU can't isolate any given device from any other
device (e.g. 32 bit PCI devices can't usually be isolated). Devices
that can't be isolated are grouped together. This code is required
for the upcoming VFIO framework.
Another IOMMU-API change written by me is the introduction of domain
attributes. This makes it easier to handle GART-like IOMMUs with the
IOMMU-API because now the start-address and the size of the domain
address space can be queried.
Besides that there are a few cleanups and fixes for the NVidia Tegra
IOMMU drivers and the reworked init-code for the AMD IOMMU. The
latter is from my patch-set to support interrupt remapping. The rest
of this patch-set requires x86 changes which are not mergabe yet. So
full support for interrupt remapping with AMD IOMMUs will come in a
future merge window."
* tag 'iommu-updates-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
iommu/amd: Fix hotplug with iommu=pt
iommu/amd: Add missing spin_lock initialization
iommu/amd: Convert iommu initialization to state machine
iommu/amd: Introduce amd_iommu_init_dma routine
iommu/amd: Move unmap_flush message to amd_iommu_init_dma_ops()
iommu/amd: Split enable_iommus() routine
iommu/amd: Introduce early_amd_iommu_init routine
iommu/amd: Move informational prinks out of iommu_enable
iommu/amd: Split out PCI related parts of IOMMU initialization
iommu/amd: Use acpi_get_table instead of acpi_table_parse
iommu/amd: Fix sparse warnings
iommu/tegra: Don't call alloc_pdir with as->lock
iommu/tegra: smmu: Fix unsleepable memory allocation at alloc_pdir()
iommu/tegra: smmu: Remove unnecessary sanity check at alloc_pdir()
iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attribute
iommu/tegra: Implement DOMAIN_ATTR_GEOMETRY attribute
iommu/msm: Implement DOMAIN_ATTR_GEOMETRY attribute
iommu/omap: Implement DOMAIN_ATTR_GEOMETRY attribute
iommu/vt-d: Implement DOMAIN_ATTR_GEOMETRY attribute
iommu/amd: Implement DOMAIN_ATTR_GEOMETRY attribute
...
|
|
Correct spelling typo in debug messages and comments
in drivers/iommu.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
'api/domain-attr' into next
Conflicts:
drivers/iommu/iommu.c
include/linux/iommu.h
|
|
Add missing spin_lock initialization in
amd_iommu_bind_pasid() function and make lockdep happy
again.
Cc: stable@vger.kernel.org # >= v3.3
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
A few sparse warnings fire in drivers/iommu/amd_iommu_init.c.
Fix most of them with this patch. Also fix the sparse
warnings in drivers/iommu/irq_remapping.c while at it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add a check to the init-path of the AMD IOMMUv2 driver if
the hardware is available in the system. Only allocate all
the resources if it is really available.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This call-back is invoked when the task that is bound to a
pasid is about to exit. The driver can use it to shutdown
all context related to that context in a safe way.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This callback can be used to change the PRI response code
sent to a device when a PPR fault fails.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Since pages are not pinned anymore we need notifications
when the VMM changes the page-tables. Use mmu_notifiers for
that.
Also use the task_exit notifier from the profiling subsystem
to shutdown all contexts related to this task.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Register the notifier for PPR faults and handle them as
necessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This patch adds routines to bind a specific process
address-space to a given PASID.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This patch adds the amd_iommu_init_device() and
amd_iommu_free_device() functions which make a device and
the IOMMU ready for IOMMUv2 usage.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add a Kconfig option for the optional driver. Since it is
optional it can be compiled as a module and will only be
loaded when required by another driver.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|