summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2015-02-12mm: gup: use get_user_pages_unlockedAndrea Arcangeli
This allows those get_user_pages calls to pass FAULT_FLAG_ALLOW_RETRY to the page fault in order to release the mmap_sem during the I/O. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-03[media] dvb_net: Convert local hex dump to print_hex_dump_debugJoe Perches
Use the generic facility instead of a home-grown one. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] dvb_net: Use standard debugging facilitiesJoe Perches
Convert dprintk to netdev_dbg where appropriate. Remove dvb_net_debug module_param. Remove __func__ from output as that can be added by dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] dvb_net: Use vsprintf %pM extension to print Ethernet addressesJoe Perches
No need for more macros, so remove them and use the kernel extension. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] stb0899: use sign_extend32() for sign extensionMartin Kepplinger
Instead of implement its own logic, use the already-defined one. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] si2168: add support for 1.7MHz bandwidthOlli Salonen
This patch is based on Antti's silabs branch. Add support for 1.7 MHz bandwidth. Supported in all versions of Si2168 according to short data sheets. [mchehab@osg.samsung.com: Fix CodingStyle] Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] si2168: return error if set_frontend is called with invalid parametersOlli Salonen
This patch should is based on Antti's silabs branch. According to dvb-frontend.h set_frontend may be called with bandwidth_hz set to 0 if automatic bandwidth is required. Si2168 does not support automatic bandwidth and does not declare FE_CAN_BANDWIDTH_AUTO in caps. This patch will change the behaviour in a way that EINVAL is returned if bandwidth_hz is 0. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lirc_dev: avoid potential null-dereferenceAndy Shevchenko
We have to check pointer for NULL and then dereference it. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] dvb: tc90522: re-add symbol-rate reportAkihiro Tsukada
symbol-rate report was wrongly removed off by the commit:906aaf5a . Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: add read snr, signal strength and ber call backsMalcolm Priestley
This allows calling the original functions providing the streaming is off. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Create frontend call back for read statusMalcolm Priestley
Create dm04_read_status to check lock through either interrupt values or directly by the call back. When the device is not streaming the frontends original call back is used. When streaming has started it turns off I2C messaging by setting st->i2c_talk_onoff to zero. I2C can only be turn on again by one of the other allowed frontend calls. All old code is removed from lme2510_msg and this function only needs to set st->i2c_talk_onoff to 1. The lock status is saved and when the frondend is locked is maintained by lme2510_int_response who will now just kill the lock. The call back for rs2000 tuner is nologer required. All frontend types have been tested. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocksMalcolm Priestley
Create call backs dm04_read_signal_strength, dm04_read_snr and move dm04_read_ber and dm04_read_ucblocks for all frontends Removing the I2C filtering from lme2510_msg and the old rs2000 callbacks. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in ↵Malcolm Priestley
interrupt urb A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK but the endpoint otheriwse functions as interrupt. Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Increase Interupt due time to 200 msecMalcolm Priestley
Ocassionally the device fails to report back an interrupt urb status which results in false no lock trigger on the RS2000 demodulator. Increase time from 60 msecs to 200 msecs. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] cx88-dvb: whitespace cleanupMauro Carvalho Chehab
X-Patchwork-Delegate: m.chehab@samsung.com Fix the following smatch warning: drivers/media/pci/cx88//cx88-dvb.c:1508 dvb_register() warn: if statement not indented Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: properly initialize pdataMauro Carvalho Chehab
As complained by smatch: drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code). Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: declare functions as staticMauro Carvalho Chehab
drivers/media/dvb-frontends/rtl2832.c:157:5: warning: no previous prototype for ‘rtl2832_bulk_write’ [-Wmissing-prototypes] int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2832.c:169:5: warning: no previous prototype for ‘rtl2832_update_bits’ [-Wmissing-prototypes] int rtl2832_update_bits(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2832.c:181:5: warning: no previous prototype for ‘rtl2832_bulk_read’ [-Wmissing-prototypes] int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg, void *val, Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2830: declare functions as staticMauro Carvalho Chehab
drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes] int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes] int rtl2830_update_bits(struct i2c_client *client, unsigned int reg, ^ drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes] int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val, ^ Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832_sdr: add kernel-doc comments for platform_dataAntti Palosaari
Add kernel-doc comments for platform_data configuration structure. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: add kernel-doc comments for platform_dataAntti Palosaari
Add kernel-doc comments for platform_data configuration structure. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2830: add kernel-doc comments for platform_dataAntti Palosaari
Add kernel-doc comments for platform_data configuration structure. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: implement own lock for regmapAntti Palosaari
Introduce own lock to silence lockdep warning. lockdep validator makes wrong decision when two similar (&map->mutex) locks were taken recursively, even those are different mutexes in a two different drivers. After that patch, functionality remains same, but mutex names are different. That is a temporary hack, proper solution is make regmap aware of locked nested locking rules. ============================================= [ INFO: possible recursive locking detected ] 3.18.0-rc4+ #4 Tainted: G O --------------------------------------------- kdvb-ad-0-fe-0/2814 is trying to acquire lock: (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 but task is already holding lock: (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&map->mutex); lock(&map->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by kdvb-ad-0-fe-0/2814: #0: (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 stack backtrace: CPU: 3 PID: 2814 Comm: kdvb-ad-0-fe-0 Tainted: G O 3.18.0-rc4+ #4 Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2001 09/11/2014 0000000000000000 00000000410c8772 ffff880293af3868 ffffffff817a6f82 0000000000000000 ffff8800b3462be0 ffff880293af3968 ffffffff810e7f94 ffff880293af3888 00000000410c8772 ffffffff82dfee60 ffffffff81ab8f89 Call Trace: [<ffffffff817a6f82>] dump_stack+0x4e/0x68 [<ffffffff810e7f94>] __lock_acquire+0x1ea4/0x1f50 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff817b01f3>] ? _raw_spin_lock_irqsave+0x83/0xa0 [<ffffffff810e13e6>] ? up+0x16/0x50 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff817af8bf>] ? _raw_spin_unlock_irqrestore+0x5f/0x70 [<ffffffff810e9069>] lock_acquire+0xc9/0x170 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff817ab50e>] mutex_lock_nested+0x7e/0x430 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff817a530b>] ? printk+0x70/0x86 [<ffffffff8110d9e8>] ? mod_timer+0x168/0x240 [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 [<ffffffff814f08d9>] regmap_update_bits+0x29/0x60 [<ffffffffa03e9778>] rtl2832_select+0x38/0x70 [rtl2832] [<ffffffffa039b03d>] i2c_mux_master_xfer+0x3d/0x90 [i2c_mux] [<ffffffff815da493>] __i2c_transfer+0x73/0x2e0 [<ffffffff815dbaba>] i2c_transfer+0x5a/0xc0 [<ffffffff815dbb6e>] i2c_master_send+0x4e/0x70 [<ffffffffa03ff25a>] regmap_i2c_write+0x1a/0x50 [regmap_i2c] [<ffffffff817ab713>] ? mutex_lock_nested+0x283/0x430 [<ffffffff814f06b2>] _regmap_raw_write+0x862/0x880 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff814f0744>] _regmap_bus_raw_write+0x74/0xa0 [<ffffffff814ef3d2>] _regmap_write+0x92/0x140 [<ffffffff814f0b7b>] regmap_write+0x4b/0x70 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core] [<ffffffffa05141d4>] e4000_init+0x34/0x210 [e4000] [<ffffffffa032a029>] dvb_frontend_init+0x59/0xc0 [dvb_core] [<ffffffff810bde30>] ? finish_task_switch+0x80/0x180 [<ffffffff810bddf2>] ? finish_task_switch+0x42/0x180 [<ffffffffa032b116>] dvb_frontend_thread+0x86/0x7b0 [dvb_core] [<ffffffff817a9203>] ? __schedule+0x343/0x930 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core] [<ffffffff810b826b>] kthread+0x10b/0x130 [<ffffffff81020099>] ? sched_clock+0x9/0x10 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250 [<ffffffff817b063c>] ret_from_fork+0x7c/0xb0 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: correct reg access routine name prefixesAntti Palosaari
Use rtl28xxu_ prefix for all register access routine names. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: merge rtl2831u and rtl2832u propertiesAntti Palosaari
As all the callbacks are already same we could merge device properties struct too and save space. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: merge chip type specific all callbacksAntti Palosaari
Merge all chip type specific prefixed (rtl2831u_ and rtl2832u_) callback to top level callback prefixed as rtl28xxu_. rtl2831u_foo() => rtl28xxu_foo() rtl2832u_foo() => rtl28xxu_foo() Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: add heuristic to detect chip typeAntti Palosaari
Detect automatically whether chip is old RTL2831U or newer RTL2832U/RTL2832P. Detection is based I2C command that is found only from newer RTL2832U models. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: move usb buffers to stateAntti Palosaari
Buffer needed for USB control message is small so move it to state and get rid of alloc/free used for each control message. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: fix loggingAntti Palosaari
Pass correct device pointer to dev_* logging in order to print module name and bus id correctly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: rename state variable 'priv' to 'dev'Antti Palosaari
I prefer dev over priv and I want keep all my drivers in line with that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: remove internal mux I2C adapterAntti Palosaari
There was 2 muxed I2C adapters, one for demod tuner bus and one for internal use. Idea of internal I2C adapter was to force I2C repeater close when demod access its registers. Driver has also delayed work queue based method to close I2C repeater. After regmap conversion internal I2C adapter based repeater close left unused - only work queue method was in use. We could not use internal mux adapter method with regmap as it makes recursive regmap call, which causes deadlock as regmap has own locking. Due to that remove whole method totally. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832_sdr: refcount to rtl28xxuAntti Palosaari
We are consumer of DVB frontend provided by rtl28xxu module. Due to that we must use refcount to ensure none could remove rtl28xxu when we are alive (or when we are streaming, if more fine-grained refcounting is wanted). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: do not refcount rtl2832_sdr moduleAntti Palosaari
This driver, rtl28xxu, offers frontend service for rtl2832_sdr module, thus we are producer and rtl2832_sdr module is consumer. Due to that, reference counting should be done in way rtl2832_sdr takes refrence to rtl28xxu. Remove wrong refcount. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: simplify FE callback handlingAntti Palosaari
Logic is so simple that there is no idea to separate tuner selection to own function, instead do it in a callback and get rid of one function. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: fix DVB FE callbackAntti Palosaari
DVB FE callback functionality went broken after I moved tuners to demod muxed I2C adapter. That happens because driver state was carried by I2C adapter and when mux is used there is one adapter more in a chain. USB adapter <-> I2C adapter <-> muxed I2C adapter Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: implement sleepAntti Palosaari
Put demod to soft reset in order to save power when sleep. That drops power usage ~30mA @5V on USB dongle I tested. In real life it does not matter much as USB IF powers off demod too, but now it is done twice - demod and USB IF. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: claim copyright and module authorAntti Palosaari
I have implemented tons of things for that driver, more than anyone else, so lets claim copyright and module authorship. Cc: Thomas Mair <thomas.mair86@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: cleanups and minor changesAntti Palosaari
Remove all the stuff that is not needed anymore. Rename variable. Remove extra new lines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832_sdr: cleanupsAntti Palosaari
Small cleanups. Remove unneeded variables. Some checkpatch issues. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832_sdr: fix loggingAntti Palosaari
Pass correct device, platform device, for logging system in order to format printouts correctly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: use master I2C adapter for slave demodsAntti Palosaari
Both mn88472 and mn88473 slave demods are connected to master I2C bus, not the bus behind master demod I2C gate like tuners. Use correct bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: switch SDR module to platform driverAntti Palosaari
RTL2832 SDR module implements kernel platform driver. Change old binding to that one. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832_sdr: convert to platform driverAntti Palosaari
That SDR driver module was abusing DVB frontend SEC (satellite equipment controller) device and due to that it was also using legacy DVB binding. Platform bus is pseudo-bus provided by kernel driver model and it fits cases like that, where any other busses are not suitable. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832_sdr: rename state variable from 's' to 'dev'Antti Palosaari
'dev' sounds better than 's' for such variable. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: provide register IO callbacksAntti Palosaari
Provide register read and write callbacks for SDR module. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: merge reg page as a part of reg addressAntti Palosaari
Chips uses 8-bit register addresses with 5 pages. Extend register address by using register page as a first byte of address, defining virtual register addresses. That is common method of handling register pages and regmap also uses it. Remove page + address conversion glue which was there for regmap. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: remove unneeded software reset from init()Antti Palosaari
There is no need to do software reset on init() as it is done a bit later on end of set_frontend(). Software reset usually means restarting (resetting to starting point) chip internal state machine (FSM). Naturally it is done after all parameters are programmed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: use regmap reg cacheAntti Palosaari
Enable regmap register cache in order to reduce IO. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: add support for RTL2832U/RTL2832 PID filterAntti Palosaari
RTL2832 demod integrated into RTL2832U has PID filter. PID filtering is provided by rtl2832 demod driver. Add support for it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: implement PID filterAntti Palosaari
Implement PID filter. This demod has PID filter size of 32 PIDs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl2832: define more demod lock statusesAntti Palosaari
Demod lock flags are derived from demod state machine states. States are running from 1 to 11, where highest state 11 means demod is fully locked and streaming. Naturally smaller state numbers means there is some partial locks. Define now state 10 as missing synch and lock. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>