summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2015-12-04mfd: as3722: Handle interrupts on suspendJon Hunter
The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-24mfd: wm8994: Ensure that the whole MFD is built into a single moduleCharles Keepax
The MFD part of wm8994 consists of three files wm8994-core.c, wm8994-irq.c and wm8994-regmap.c only wm8994-core.c has a MODULE_DESCRIPTION / LICENSE. These were clearly intended to be built as a single module, but currently are not. This will lead to a tainted kernel when loading modules for wm8894-irq.c and wm8994-regmap.c because are missing a license. This patch fixes this issue by grouping the three files together into a single module. Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-24mfd: sec-core: Rename MFD and regulator names differentlyAlim Akhtar
Currently S2MPSXX multifunction device is named as *-pmic, and these MFDs also supports regulator as a one of its MFD cell which has the same name, because current name is confusing and we want to sort it out. We did discussed different approaches about how the MFD and it cells need to be named here [1]. Based in the discussion this patch rename MFD regulator name as *-regulator instead of current *-pmic. This patch also changes the corresponding entries in the regulator driver to keep git-bisect happy. [1]-> https://lkml.org/lkml/2015/10/28/417 Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-24mfd: lpc_ich: Intel device IDs for PCHAlexandra Yates
Adding Intel codename Lewisburg platform device IDs for PCH. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-23mfd: sec: Add support for S2MPS15 PMICThomas Abraham
Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz clock outputs and battery charger. This patch adds initial support for LDO and buck regulators of S2MPS15 device. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [Alim: Added s2mps15_devs like rtc and clk and related changes] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17[media] include/media: move platform_data to linux/platform_data/mediaMauro Carvalho Chehab
Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-06Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
2015-11-06mfd: avoid newly introduced compiler warningLinus Torvalds
Commit b158b69a3765 ("mfd: rtsx: Simplify function return logic") removed the use of the 'err' variable, but left the variable itself around, resulting in gcc quite reasonably warning: drivers/mfd/rtsx_pcr.c: In function ‘rtsx_pci_set_pull_ctl’: drivers/mfd/rtsx_pcr.c:565:6: warning: unused variable ‘err’ [-Wunused-variable] int err; ^ Get rid of the unused variable, and avoid the new warning. Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge tag 'mfd-for-linus-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for 88pm860; 88pm80x - Add support for 24c08 EEPROM; at24 - Add support for Broxton Whiskey Cove; intel* - Add support for RTS522A; rts5227 - Add support for I2C devices; intel_quark_i2c_gpio New Functionality: - Add microphone support; arizona - Add general purpose switch support; arizona - Add fuel-gauge support; da9150-core - Add shutdown support; sec-core - Add charger support; tps65217 - Add flexible serial communication unit support; atmel-flexcom - Add power button support; axp20x - Add led-flash support; rt5033 Core Frameworks: - Supply a generic macro for defining Regmap IRQs - Rework ACPI child device matching Fix-ups: - Use Regmap to access registers; tps6105x - Use DEFINE_RES_IRQ_NAMED() macro; da9150 - Re-arrange device registration order; intel_quark_i2c_gpio - Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501 - Handle deferred probe; twl6040 - Improve accuracy of headphone detect; arizona - Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033 - Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core - Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona - Remove #iffery; arizona - DT binding adaptions; many Bug Fixes: - Fix possible NULL pointer dereference; wm831x, tps6105x - Fix 64bit bug; intel_soc_pmic_bxtwc - Fix signedness issue; arizona" * tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children extcon: arizona: Add extcon specific device tree binding document MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices mfd: arizona: Remove bindings covered in new subsystem specific docs mfd: rt5033: Add RT5033 Flash led sub device mfd: lpss: Add Intel Broxton PCI IDs mfd: lpss: Add Broxton ACPI IDs mfd: arizona: Signedness bug in arizona_runtime_suspend() mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X mfd: sec-core: Disable buck voltage reset on watchdog falling edge mfd: sec-core: Dump PMIC revision to find out the HW mfd: arizona: Use correct type ID for device tree config mfd: arizona: Remove use of codec build config #ifdefs mfd: arizona: Simplify adding subdevices mfd: arizona: Downgrade type mismatch messages to dev_warn mfd: arizona: Factor out checking of jack detection state mfd: arizona: Factor out DCVDD isolation control mfd: Make TPS6105X select REGMAP_I2C ...
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-05Merge tag 'regulator-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This is quite a quiet release in terms of volume of patches but it includes a couple of really nice core changes - the work Sascha has done in particular is something I've wanted to get done for a long time but just never got round to myself. Highlights include: - Support from Sascha Hauer for setting the voltage of parent supplies based on requests from their children. This is used both to allow set_voltage() to work through a dumb switch and to improve the efficiency of systems where DCDCs are used to supply LDOs by minimising the voltage drop over the LDOs. - Removal of regulator_list by Tomeu Vizoso, meaning we're not duplicating the device list maintained by the driver core. - Support for Wolfson/Cirrus WM8998 and WM1818" * tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits) regulator: Use regulator_lock_supply() for get_voltage() too regulator: arizona: Add regulator specific device tree binding document regulator: stw481x: compile on COMPILE_TEST regulator: qcom-smd: Correct set_load() unit regulator: core: Propagate voltage changes to supply regulators regulator: core: Factor out regulator_map_voltage regulator: i.MX anatop: Allow supply regulator regulator: introduce min_dropout_uV regulator: core: create unlocked version of regulator_set_voltage regulator: arizona-ldo1: Fix handling of GPIO 0 regulator: da9053: Update regulator for DA9053 BC silicon support regulator: max77802: Separate sections for nodes and properties regulator: max77802: Add input supply properties to DT binding doc regulator: axp20x: set supply names for AXP22X DC1SW/DC5LDO internally regulator: axp20x: Drop AXP221 DC1SW and DC5LDO regulator supplies from bindings mfd: tps6105x: Use i2c regmap to access registers regulator: act8865: add DT binding for property "active-semi,vsel-high" regulator: act8865: support output voltage by VSET2[] bits regulator: arizona: add support for WM8998 and WM1814 regulator: core: create unlocked version of regulator_list_voltage ...
2015-11-05Merge tag 'char-misc-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
2015-11-04Merge remote-tracking branches 'regulator/topic/supply', ↵Mark Brown
'regulator/topic/tps6105x' and 'regulator/topic/tps65023' into regulator-next
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-30mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk childrenKrzysztof Kozlowski
The commit 54e8827d5f0e ("mfd: sec-core: Add support for S2MPU02 device") added new MFD child devices for S2MPU02: RTC and clock provider (the clock provider with new compatible). However support for these devices was not added to existing drivers (rtc-s5m, clk-s2mps11). New drivers were not submitted neither. This means that the name of children devices is completely unused. The "samsung,s2mpu02-clk" compatible remains undocumented so it is unclear what is provided by that compatible. Clean up this by removing unused child devices and undocumented compatible. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: rt5033: Add RT5033 Flash led sub deviceIngi Kim
This patch adds rt5033-led sub device to support it. Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lpss: Add Intel Broxton PCI IDsAndy Shevchenko
Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lpss: Add Broxton ACPI IDsMika Westerberg
Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton ACPI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Signedness bug in arizona_runtime_suspend()Dan Carpenter
The "jd_active" variable needs to be signed for the error handling to work. Fixes: 143e5887ae57 ('mfd: arizona: factor out checking of jack detection state') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: axp20x: Add a cell for the power button part of the, axp288 PMICsBorun Fu
This patch adds the mfd cell info for axp288 power key device. Signed-off-by: Borun Fu <borun.fu@linux.intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: sec-core: Disable buck voltage reset on watchdog falling edgeKrzysztof Kozlowski
The WRSTBI bit (disabled by default but enabled by bootloader), when set, is responsible for resetting voltages to default values of certain bucks on falling edge of Warm Reset Input pin from AP. However on some boards (with S2MPS13) the pin is pulled down so any suspend will effectively trigger the reset of bucks supplying the power to the little and big cores. In the same time when resuming, these bucks must provide voltage greater or equal to voltage before suspend to match the frequency chosen by cpufreq. If voltage (default value of voltage after reset) is lower than one set by cpufreq before suspend, then system will hang during resuming. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: sec-core: Dump PMIC revision to find out the HWKrzysztof Kozlowski
There are different revisions of the same chipset. For example S2MPS13 has more than 2 revisions. They differ slightly in regulator constraints. Print the revision number to easily find which PMIC is used on the board. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Use correct type ID for device tree configRichard Fitzgerald
In the case of a device tree config the code uses the device ID from the DT entry to check which codec is required but when storing the ID into struct arizona it was always using the non-DT SPI device table to get an ID. This patch changes the code to store the correct ID into struct arizona. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Remove use of codec build config #ifdefsRichard Fitzgerald
Remove the use of #ifdefs around each case statement of the chip ID and type validation switches. We must ensure that the contained code still compiles to nothing if support for that codec was not built into the kernel, to prevent creation of link references to missing functions. So the ifdefs are replaced with a use of the IS_ENABLED() macro. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Simplify adding subdevicesRichard Fitzgerald
The code was using a switch on the code type to execute one of several mfd_add_devices() calls. We're already switching on the code type earlier in the function to select the correct patch function so we can roll selection of the mfd device table into the same switch. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Downgrade type mismatch messages to dev_warnRichard Fitzgerald
If the declared codec type doesn't match the detected type we issue a log message but carry on registering the device, so a dev_warn() is appropriate rather than a dev_err() Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Factor out checking of jack detection stateRichard Fitzgerald
Currently runtime_suspend will fully power off the codec if the jack detection is not enabled. Not all future codecs will have jack detection so to prepare for these codecs this patch factors out the check so that it be called as needed in the existing codec-specific switch cases. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Factor out DCVDD isolation controlRichard Fitzgerald
Currently DCVDD isolation is enabled and disabled for runtime_suspend and runtime_resume. Future codecs will not have the isolation control so to prepare for these codecs this patch factors out the isolation control allowing it to be called as needed in the existing codec-specific switch cases. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: Make TPS6105X select REGMAP_I2CAxel Lin
This is required since commit 7e5071199355 ("mfd: tps6105x: Use i2c regmap to access registers"). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lm3533: Fix unused variable build warningSudip Mukherjee
We were getting build warning about unused variable 'ret'. The commit c749db571dcf has removed the use of ret but missed removing the variable which is unused now. Fixes: c749db571dcf ("mfd: lm3533: Simplify function return logic") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: rtsx: Add support for rts522AMicky Ching
rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227. Add it to file mfd/rts5227.c to support this chip. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da9062-core: Rename get_device_type to da9062_get_device_typeAxel Lin
Rename get_device_type() to da9062_get_device_type(). This function is only used in this file so make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: Kconfig: Compile MFD_STW481X with COMPILE_TESTLuis de Bethencourt
The driver depends on ARCH_NOMADIK but there isn't a build dependency so it's a good idea to allow the driver to always be built when the COMPILE_TEST option is enabled. That way, the driver can be built with a config generated by make allyesconfig and check if a patch would break the build. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da9053: Addition of extra registers for GPIOs 8-13Steve Twiss
Definitions for GPIO registers 8, 9, 10, 11, 12 and 13 are added into the register header file. - DA9052_GPIO_8_9_REG 25 - DA9052_GPIO_10_11_REG 26 - DA9052_GPIO_12_13_REG 27 A modification is also made to the MFD core code to define these registers as readable and writable. The functions for da9052_reg_readable() and da9052_reg_writeable() have had their case statements altered to include these new registers. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: atmel-flexcom: Add a driver for Atmel Flexible Serial Communication UnitCyrille Pitchen
This driver supports the new Atmel Flexcom. The Flexcom is a wrapper which integrates one SPI controller, one I2C controller and one USART. Only one function can be enabled at a time. This driver selects the function once for all, when the Flexcom is probed, according to the value of the new "atmel,flexcom-mode" device tree property. This driver has chosen to present the Flexcom to the system as a MFD so the implementation is seamless for the existing Atmel SPI, I2C and USART drivers. Also the Flexcom embeds FIFOs: the latest patches of the SPI, I2C and USART drivers take advantage of this new feature. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: intel_soc_pmic_bxtwc: 64 bit bug in bxtwc_val_store()Dan Carpenter
The call to kstrtoul() will corrupt memory on 64 bit systems because an int is 4 bytes and a long is 8. Also it's not a good idea to let users trigger a dev_err() because it just ends up flooding /var/log/messages so I removed the printk. Fixes: 2ddd2086ea9c ('mfd: add Intel Broxton Whiskey Cove PMIC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da9052: Simplify function return logicJavier Martinez Canillas
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lm3533: Simplify function return logicJavier Martinez Canillas
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: da903x: Simplify function return logicJavier Martinez Canillas
The invoked function already returns zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: rtsx: Simplify function return logicJavier Martinez Canillas
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: kempld-core: Simplify function return logicJavier Martinez Canillas
The invoked functions already return zero on success or a negative errno code so there is no need to open code the logic in the caller. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: pcf50633: Remove unneded ret variableJavier Martinez Canillas
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: arizona: Remove unneded ret variableJavier Martinez Canillas
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: htc-i2cpld: Remove unneded ret variableJavier Martinez Canillas
The ret variable is not needed since is not used in the function. Remove the variable and just return 0 instead. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: tps6105x: Fix possible NULL pointer accessGrigoryev Denis
tps6105 driver provides two cells. One is for GPIO and another one is for selected mode depending on platform data. When tps6105x is used in GPIO-only mode, this driver calls mfd_add_devices() with mfd_cell .name == NULL. This value causes an oops in platform_device_register() later. The following patch adds a mfd_cell for each possible mode thereby excluding .name assignment in runtime. Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: qcom_rpm: Drop use of IRQF_NO_SUSPEND flagSudeep Holla
The driver handles wakeup irq correctly using irq_set_irq_wake. There's no need to use IRQF_NO_SUSPEND while registering the interrupt. This patch removes the use of IRQF_NO_SUSPEND flag. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: lpc_ich: Separate device cells for clarityAaron Sierra
The lpc_ich_cells array gives the wrong impression about the relationship between the watchdog and GPIO devices. They are completely distinct devices, so this patch separates the array into distinct mfd_cell structs per device. A side effect of removing the array, is that the lpc_cells enum is no longer needed. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30mfd: add Intel Broxton Whiskey Cove PMIC driverQipeng Zha
Add MFD core driver for Intel Broxton Whiskey Cove PMIC, which is specially accessed by hardware IPC, not a generic I2C device Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v0.10.2 at 2024-07-17 13:43:36 (GMT)