summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2015-03-30mfd: menelaus: Use macro for magic numberAaro Koskinen
Use macro to check a register bit. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30mfd: menelaus: Drop support for SW controller VCOREAaro Koskinen
Drop support for SW controlled VCORE, nobody uses it. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30mfd: lpc_ich: Sort IDsAndy Shevchenko
This patch just sorts IDs in the table for better maintenance. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30mfd: Fix a typo in KconfigŁukasz Stelmach
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30mfd: qcom_rpm: Add support for IPQ8064Josh Cartwright
The IPQ8064 also includes an RPM following the same message structure as other chips. In addition, it supports a few new resource types to support the NSS fabric clocks and the SMB208/SMB209 regulators found on the reference boards. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30mfd: core: Fix platform-device name collisionsJohan Hovold
Since commit 6e3f62f0793e ("mfd: core: Fix platform-device id generation") we honour PLATFORM_DEVID_AUTO and PLATFORM_DEVID_NONE when registering mfd-devices. Unfortunately, some mfd-drivers rely on the old behaviour of generating platform-device ids by adding the cell id also to the special value of PLATFORM_DEVID_NONE. The resulting platform ids are not only used to generate device-unique names, but are also used instead of the cell id to identify cells when probing subdevices. These drivers should be updated to use PLATFORM_DEVID_AUTO, which would also allow more than one device to be registered without resorting to hacks (see for example wm831x), but lets fix the regression first by partially reverting the above mentioned commit with respect to PLATFORM_DEVID_NONE. Fixes: 6e3f62f0793e ("mfd: core: Fix platform-device id generation") Cc: stable <stable@vger.kernel.org> # v3.19 Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30mfd: intel_quark_i2c_gpio: Don't crash if !DMIAndy Shevchenko
dmi_get_system_info() may return NULL either when CONFIG_DMI is not set or when board has an old firmware. The patch prevents a crash and changes the default frequency to be in align with older board. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Lee: Removed overt "sentinel" comment and extra lines] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26mfd: sec-core: Enable RTC on S2MPS11 PMICKrzysztof Kozlowski
The S2MPS11 PMIC (present on Arndale Octa board) has the same RTC module as S2MPS14 device. Add respective mfd cell to enable it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26mfd: Constify of_device_id arrayFabian Frederick
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26mfd: dln2: Use msecs_to_jiffies for time conversionNicholas Mc Guire
Converting milliseconds to jiffies by "val * HZ / 1000" is technically OK but msecs_to_jiffies(val) is the cleaner solution and handles all corner cases correctly. This is a minor API consolidation only and should make things more readable. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26mfd: tc3589x: Enforce device-tree only modeLinus Walleij
All systems using the TC3589x multifunction expander uses devicetree, so don't clutter the place with a lot of and assume it is there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-23mfd: mc13xxx-core: %pF is only for function pointersScott Wood
Use %pS for actual addresses, otherwise you'll get bad output on arches like ppc64 where %pF expects a function descriptor. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-23mfd: menelaus: Remove incorrect __exit markupsDmitry Torokhov
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: Add support for Skyworks SKY81452 driverGyungoh Yoo
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: arizona: Add DT binding for the DMIC reference voltagesCharles Keepax
Add a DT binding that lets the DMIC reference voltage source be specified for each input. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: max77693: Modify flash cell name identifiersJacek Anaszewski
Change flash cell identifiers from max77693-flash to max77693-led to avoid confusion with NOR/NAND Flash. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD DriverRaymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers. This patch is based on Josef Ahmad's initial work for Quark enabling. Acked-by: Michael Turquette <mturquette@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Weike Chen <alvin.chen@intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: rk808: Disable the under voltage detectChris Zhong
Rk808 has a under voltage detect function, when the voltage of buck is under 85% the target voltage, the buck output will reset. But if the power load is too heavy, this function maybe err, when current over 4.2A, although the voltage is normal, but RK808 mistakenly think it is under 85%, and reset the buck. So let's disable this function. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: ab8500-debugfs: Remove use of seq_printf return valueJoe Perches
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: rt5033: MFD_RT5033 needs to select REGMAP_IRQArtem Savkov
Since commit 0b2712585(linux-next.git) this driver uses regmap_irq and so needs to select REGMAP_IRQ. This fixes the following compilation errors: ERROR: "regmap_irq_get_domain" [drivers/mfd/rt5033.ko] undefined! ERROR: "regmap_add_irq_chip" [drivers/mfd/rt5033.ko] undefined! Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: da9052: Register ability of device to cause a wake-up interruptAdam Ward
Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: da9052: Fix register access via SPIAdam Ward
The range of registers used by this driver exceeds that available via SPI with no paging (127), so we have to override the values from the default config which is set-up for I2C access. Also change SPI settings to match device's recommended OTP values. Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-04mfd: max77843: Add max77843 MFD driver core driverJaewon Kim
This patch adds MAX77843 core/irq driver to support PMIC, MUIC(Micro USB Interface Controller), Charger, Fuel Gauge, LED and Haptic device. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-04mfd: Add support for the MediaTek MT6397 PMICFlora Fu
This adds support for the MediaTek MT6397 PMIC. This is a multifunction device with the following sub modules: - Regulator - RTC - Audio codec - GPIO - Clock It is interfaced to the host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397 MFD is a child device of the pwrap. Signed-off-by: Flora Fu, MediaTek Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: sec: Remove unnecessary out of memory messageKrzysztof Kozlowski
There is no need to print additional ENOMEM message for sec_platform_data allocation failure. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: sec: Cleanup unused RTC fields: ono, WTSR and SMPLKrzysztof Kozlowski
The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary Power Loss) were removed from rtc-s5m driver because they were not used. Remove them (and on/off interrupt) from main MFD driver and header. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: da9150: Constify struct regmap_configKrzysztof Kozlowski
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Using pcr_dbg replace dev_dbgMicky Ching
pcr_dbg is a wrapper of dev_dbg, which can save some code, and help to enable/disable debug message static. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Add support for rts525AMicky Ching
Add support for new chip rts525A. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Add support for rts524AMicky Ching
add support for new chip rts524A. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Remove LCTLR definationMicky Ching
To enable/disable ASPM we should find LINK CONTROL register in PCI config space. All old chip use 0x80 address, but new chip may use another address, so we using pci_find_capability() to get LINK CONTROL address. rtsx_gops.c was removed, we consider to put some common operations to this file, but the actual thing is, only a group of chips are in common ops1, and another group of chips in common ops2, it is hard to decide put which ops into generic ops file. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Update phy registerMicky Ching
Update some phy register name and value for rts5249, the updated value makes chip more stable on some platform. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Update driving settingsMicky Ching
update card drive settings, This setting can be used for rts5249 rts524A and rts525A. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Update PETXCFG addressMicky Ching
PETXCFG is defined at 0xFF03, the old 0xFE49 not used any more. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: ti_am335x_tscadc: Remove unwanted reg_se_cache saveVignesh R
In one shot mode, sequencer automatically disables all enabled steps at the end of each cycle. (both ADC steps and TSC steps) Hence these steps need not be saved in reg_se_cache for clearing these steps at a later stage. Also, when ADC wakes up Sequencer should not be busy executing any of the config steps except for the charge step. Previously charge step was 1 ADC clock cycle and hence it was ignored. TSC steps are always disabled at the end of each conversion cycle, hence there is no need to explicitly disable TSC steps by writing 0 to REG_SE. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: vexpress: Remove non-DT codePawel Moll
Now, as all VE platforms have to be booted with DT, the code handling non-DT case can be removed. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: Add support for COMe-cBL6 to Kontron PLD driverMichael Brunner
This patch adds the DMI system ID of the Kontron COMe-cBL6 board to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: axp20x: Change battery cell name to fuel gaugeTodd Brandt
Name changes to the battery cell structure to a more generic cell type: fuel gauge. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: intel_soc_pmic: Ensure GPIO irq is set to input pinJarkko Nikula
Surely GPIO irq will be used as an input pin so make sure its direction is set after requesting. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: intel_soc_pmic: Do not mangle error code from devm_gpiod_get_index()Jarkko Nikula
It is usually better to pass actual error code from a function call than mangling it to another. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: intel_soc_pmic: Move PMIC interrupt comment to probe functionJarkko Nikula
intel_soc_pmic_find_gpio_irq() tries to find a GPIO interrupt but doesn't select between it or I2C interrupt so it makes more sense to move this comment to intel_soc_pmic_i2c_probe() with minor edits. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26mfd: arizona: Add support for WM8280/WM8281Richard Fitzgerald
This adds support for the Wolfson Microelectronics WM8280 and WM8281 codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> [Lee: Minor fixup to remove potentially uninitialised variable. ] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-18Merge tag 'mfd-for-linus-3.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - fixr platform device collision; da9052, wm8994-core - regmap configuration amendments; tps65218 - fix runtime PM deadlock; rtsx_usb - remove unused/superfluous code; db8500-prcmu, omap-usb-host - enable watchdog timer; lpc_sch - add start/stop RX URBs helpers; dln2 - remove platform device (DT only); max77686, max77802 - support suspend and resume; dln2 - add Device Tree support; da9063 - extra error checking; intel_soc_pmic - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic, max77686, lm3533, retu, pcf50633, davinci_voicecodec, smsc-ece1099, tps65218, mc13xxx, tps65217, twl-core, twl6040 New drivers/supported devices: - new driver for Richtek RT5033 - new driver for DA9150 Charger and FuelGauge - new driver for Qualcomm Resource Power Manager (RPM) - add support for the ir-clk into sun6i-prcm - add support for FuelGauge into axp20x" * tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: intel_soc_pmic: Add missing error check for devm_kzalloc mfd: rtsx_usb: Defer autosuspend while card exists mfd: devicetree: Add bindings for DA9063 mfd: da9063: Add device tree support regulator: qcom-rpm: Add missing state flag in call to RPM mfd: qcom-rpm: Driver for the Qualcomm RPM mfd: devicetree: bindings: Add Qualcomm RPM DT binding mfd: max77686/802: Remove support for board files mfd: omap-usb-host: Remove some unused functions mfd: twl6040: Constify struct regmap_config and reg_default array mfd: twl-core: Constify struct regmap_config and reg_default array mfd: tps65217: Constify struct regmap_config mfd: mc13xxx: i2c/spi: Constify struct regmap_config mfd: tps65218: Constify struct regmap_config mfd: smsc-ece1099: Constify struct regmap_config mfd: davinci_voicecodec: Constify struct regmap_config mfd: pcf50633: Constify struct regmap_config mfd: retu: Constify struct regmap_config mfd: lm3533: Constify struct regmap_config mfd: max77686: Constify struct regmap_config ...
2015-02-16mfd: intel_soc_pmic: Add missing error check for devm_kzallocKiran Padwal
This patch add a missing check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: rtsx_usb: Defer autosuspend while card existsRoger Tseng
A card insertion happens after the lastest polling before reader is suspended may never have a chance to be detected. Under current 1-HZ polling interval setting in mmc_core, the worst case of such undetectablility is about 1 second. To further reduce the undetectability, detect card slot again in suspend method and defer the autosuspend if the slot is loaded. The default 2 second autosuspend delay of USB subsystem should let the next polling detects the card. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: da9063: Add device tree supportSteve Twiss
Add device tree support for DA9063 regulators; Real-Time Clock and Watchdog. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: qcom-rpm: Driver for the Qualcomm RPMBjorn Andersson
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: max77686/802: Remove support for board filesKrzysztof Kozlowski
The driver is used only on Exynos based boards with DTS support. After removal of board file support from max77686 and max77802 regulator drivers, the MFD driver can be converted to DTS-only version. This simplifies a little the code: 1. No dead (unused) entries in platform_data structure. 2. More code removed. 3. Regulator driver does not depend on allocated memory from MFD driver. 4. It makes also easier extending the regulator driver. Add to the max77686 MFD driver dependency on CONFIG_OF because without DTS the regulator drivers (max77686 and max77802) won't bind. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: omap-usb-host: Remove some unused functionsRickard Strandqvist
Removes some functions that are not used anywhere: usbhs_readb() usbhs_writeb() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: twl6040: Constify struct regmap_config and reg_default arrayKrzysztof Kozlowski
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make array of struct reg_default const as well. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v0.10.2 at 2024-09-19 03:14:56 (GMT)