index
:
linux
grapeboard-proto
grapeboard-proto-eth0softfix
scalys-lsdk-1712
NXP/Freescale LSDK linux tree with Scalys patches
www-data
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
drivers
/
mmc
/
host
/
sdhci.c
Age
Commit message (
Expand
)
Author
2011-08-13
mmc: sdhci: use f_max instead of host->clock for timeouts
Andy Shevchenko
2011-08-13
mmc: sdhci: move timeout_clk calculation farther down
Andy Shevchenko
2011-08-13
mmc: sdhci: check host->clock before using it as a denominator
Andy Shevchenko
2011-08-13
mmc: Revert "mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK"
Andy Shevchenko
2011-08-13
mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish
Aaron Lu
2011-07-20
mmc: sdhci: specify maximum discard timeout
Adrian Hunter
2011-07-20
mmc: sdhci: fix interrupt storm from card detection
Shawn Guo
2011-05-25
mmc: sdhci: Auto-CMD23 fixes.
Andrei Warkentin
2011-05-25
mmc: sdhci: Auto-CMD23 support.
Andrei Warkentin
2011-05-25
mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.
Andrei Warkentin
2011-05-25
mmc: sdhci: add hooks for setting UHS in platform specific code
Philip Rakity
2011-05-25
mmc: sdhci: add support for retuning mode 1
Arindam Nath
2011-05-25
mmc: sdhci: add support for programmable clock mode
Arindam Nath
2011-05-25
mmc: sdhci: enable preset value after uhs initialization
Arindam Nath
2011-05-25
mmc: sd: add support for tuning during uhs initialization
Arindam Nath
2011-05-25
mmc: sd: set current limit for uhs cards
Arindam Nath
2011-05-25
mmc: sd: add support for uhs bus speed mode selection
Arindam Nath
2011-05-25
mmc: sdhci: reset sdclk before setting high speed enable
Arindam Nath
2011-05-25
mmc: sd: add support for driver type selection
Arindam Nath
2011-05-25
mmc: sd: add support for signal voltage switch procedure
Arindam Nath
2011-05-25
mmc: sdhci: Fix read-only detection with JMicron 388 chip
Takashi Iwai
2011-05-25
mmc: sdhci: Add pre and post reset processing for chip specific reset
Philip Rakity
2011-05-25
mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK
Mark Brown
2011-05-25
mmc: sdhci: work around broken dma boundary behavior
Mikko Vinni
2011-05-25
mmc: sdhci: R1B command handling + MMC_CAP_ERASE.
Andrei Warkentin
2011-04-27
mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finish
Chris Ball
2011-04-27
mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finish
Ben Dooks
2011-01-09
mmc: sdhci: add quirk for max len ADMA descriptors
Olof Johansson
2011-01-09
mmc: Test bus-width for old MMC devices
Aries Lee
2011-01-09
mmc: Add support for JMicron 388 SD/MMC controller
Takashi Iwai
2011-01-09
mmc: sdhci: print SD Command and CAPABILITY_1 when dumping registers
Philip Rakity
2010-11-22
mmc: sdhci: 8-bit bus width changes
Philip Rakity
2010-11-07
mmc: sdhci: Properly enable SDIO IRQ wakeups
Daniel Drake
2010-10-23
mmc: sdhci: introduce get_ro private write-protect hook
Wolfram Sang
2010-10-23
mmc: sdhci: allow for eMMC 74 clock generation by controller
Philip Rakity
2010-10-23
mmc: sdhci: highspeed: check for mmc as well as sd cards
Philip Rakity
2010-10-23
mmc: sdhci: fix "pwr may be used uninitialized" warning
Giuseppe Cavallaro
2010-10-23
mmc: sdhci: disable MMC_CAP_NEEDS_POLL in nonremovable case
Jaehoon Chung
2010-10-23
mmc: sdhci: print out controller name for register debug
Philip Rakity
2010-10-23
mmc: sdhci: add MMC_CAP_8_BIT_DATA in the host capabilities
Giuseppe Cavallaro
2010-10-23
mmc: sdhci: Enable high-speed support for MMC cards
Zhangfei Gao
2010-10-23
mmc: SDHC 3.0: correct f_min calculation for SD 3.0 spec
Zhangfei Gao
2010-10-23
mmc: SDHC 3.0: Base clock frequency change in spec 3.0
Zhangfei Gao
2010-10-23
mmc: SDHC 3.0: support 10-bit divided clock mode
Zhangfei Gao
2010-10-23
mmc: sdhci: Make consistent use of CONFIG_MMC_DEBUG for "DEBUG"ging
George G. Davis
2010-10-23
mmc: Remove distinction between hw and phys segments
Martin K. Petersen
2010-08-20
sdhci: add no hi-speed bit quirk support
Kyungmin Park
2010-08-11
sdhci: add auto CMD12 support for eSDHC driver
Jerry Huang
2010-08-11
sdhci: add regulator support
Marek Szyprowski
2010-08-11
sdhci-s3c: add support for the non standard minimal clock value
Marek Szyprowski
[next]