summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2015-09-08Merge tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Fix a race condition in the request handling - Skip trim commands for some buggy kingston eMMCs - An optimization and a correction for erase groups - Set CMD23 quirk for some Sandisk cards MMC host: - sdhci: Give GPIO CD higher precedence and don't poll when it's used - sdhci: Fix DMA memory leakage - sdhci: Some updates for clock management - sdhci-of-at91: introduce driver for the Atmel SDMMC - sdhci-of-arasan: Add support for sdhci-5.1 - sdhci-esdhc-imx: Add support for imx7d which also supports HS400 - sdhci: A collection of fixes and improvements for various sdhci hosts - omap_hsmmc: Modernization of the regulator code - dw_mmc: A couple of fixes for DMA and PIO mode - usdhi6rol0: A few fixes and support probe deferral for regulators - pxamci: Convert to use dmaengine - sh_mmcif: Fix the suspend process in a short term solution - tmio: Adjust timeout for commands - sunxi: Fix timeout while gating/ungating clock" * tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits) mmc: android-goldfish: remove incorrect __iomem annotation mmc: core: fix race condition in mmc_wait_data_done mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state mmc: host: omap_hsmmc: avoid pbias regulator enable on power off mmc: host: omap_hsmmc: add separate function to set pbias mmc: host: omap_hsmmc: add separate functions for enable/disable supply mmc: host: omap_hsmmc: return error if any of the regulator APIs fail mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc mmc: sdhci-of-at91: fix platform_no_drv_owner.cocci warnings mmc: sh_mmcif: Fix suspend process mmc: usdhi6rol0: fix error return code ...
2015-09-02Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull SG updates from Jens Axboe: "This contains a set of scatter-gather related changes/fixes for 4.3: - Add support for limited chaining of sg tables even for architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph. - Add sg chain support to target_rd. From Christoph. - Fixup open coded sg->page_link in crypto/omap-sham. From Christoph. - Fixup open coded crypto ->page_link manipulation. From Dan. - Also from Dan, automated fixup of manual sg_unmark_end() manipulations. - Also from Dan, automated fixup of open coded sg_phys() implementations. - From Robert Jarzmik, addition of an sg table splitting helper that drivers can use" * 'for-4.3/sg' of git://git.kernel.dk/linux-block: lib: scatterlist: add sg splitting function scatterlist: use sg_phys() crypto/omap-sham: remove an open coded access to ->page_link scatterlist: remove open coded sg_unmark_end instances crypto: replace scatterwalk_sg_chain with sg_chain target/rd: always chain S/G list scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
2015-09-02Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "This first core part of the block IO changes contains: - Cleanup of the bio IO error signaling from Christoph. We used to rely on the uptodate bit and passing around of an error, now we store the error in the bio itself. - Improvement of the above from myself, by shrinking the bio size down again to fit in two cachelines on x86-64. - Revert of the max_hw_sectors cap removal from a revision again, from Jeff Moyer. This caused performance regressions in various tests. Reinstate the limit, bump it to a more reasonable size instead. - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me. Most devices have huge trim limits, which can cause nasty latencies when deleting files. Enable the admin to configure the size down. We will look into having a more sane default instead of UINT_MAX sectors. - Improvement of the SGP gaps logic from Keith Busch. - Enable the block core to handle arbitrarily sized bios, which enables a nice simplification of bio_add_page() (which is an IO hot path). From Kent. - Improvements to the partition io stats accounting, making it faster. From Ming Lei. - Also from Ming Lei, a basic fixup for overflow of the sysfs pending file in blk-mq, as well as a fix for a blk-mq timeout race condition. - Ming Lin has been carrying Kents above mentioned patches forward for a while, and testing them. Ming also did a few fixes around that. - Sasha Levin found and fixed a use-after-free problem introduced by the bio->bi_error changes from Christoph. - Small blk cgroup cleanup from Viresh Kumar" * 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits) blk: Fix bio_io_vec index when checking bvec gaps block: Replace SG_GAPS with new queue limits mask block: bump BLK_DEF_MAX_SECTORS to 2560 Revert "block: remove artifical max_hw_sectors cap" blk-mq: fix race between timeout and freeing request blk-mq: fix buffer overflow when reading sysfs file of 'pending' Documentation: update notes in biovecs about arbitrarily sized bios block: remove bio_get_nr_vecs() fs: use helper bio_add_page() instead of open coding on bi_io_vec block: kill merge_bvec_fn() completely md/raid5: get rid of bio_fits_rdev() md/raid5: split bio for chunk_aligned_read block: remove split code in blkdev_issue_{discard,write_same} btrfs: remove bio splitting and merge_bvec_fn() calls bcache: remove driver private bio splitting code block: simplify bio_add_page() block: make generic_make_request handle arbitrarily sized bios blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL) block: don't access bio->bi_error after bio_put() block: shrink struct bio down to 2 cache lines again ...
2015-09-01mmc: android-goldfish: remove incorrect __iomem annotationChristoph Hellwig
Make sparse happy: drivers/mmc/host/android-goldfish.c:535:56: sparse: incorrect type in argument 3 (different address spaces) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-31mmc: core: fix race condition in mmc_wait_data_doneJialing Fu
The following panic is captured in ker3.14, but the issue still exists in latest kernel. --------------------------------------------------------------------- [ 20.738217] c0 3136 (Compiler) Unable to handle kernel NULL pointer dereference at virtual address 00000578 ...... [ 20.738499] c0 3136 (Compiler) PC is at _raw_spin_lock_irqsave+0x24/0x60 [ 20.738527] c0 3136 (Compiler) LR is at _raw_spin_lock_irqsave+0x20/0x60 [ 20.740134] c0 3136 (Compiler) Call trace: [ 20.740165] c0 3136 (Compiler) [<ffffffc0008ee900>] _raw_spin_lock_irqsave+0x24/0x60 [ 20.740200] c0 3136 (Compiler) [<ffffffc0000dd024>] __wake_up+0x1c/0x54 [ 20.740230] c0 3136 (Compiler) [<ffffffc000639414>] mmc_wait_data_done+0x28/0x34 [ 20.740262] c0 3136 (Compiler) [<ffffffc0006391a0>] mmc_request_done+0xa4/0x220 [ 20.740314] c0 3136 (Compiler) [<ffffffc000656894>] sdhci_tasklet_finish+0xac/0x264 [ 20.740352] c0 3136 (Compiler) [<ffffffc0000a2b58>] tasklet_action+0xa0/0x158 [ 20.740382] c0 3136 (Compiler) [<ffffffc0000a2078>] __do_softirq+0x10c/0x2e4 [ 20.740411] c0 3136 (Compiler) [<ffffffc0000a24bc>] irq_exit+0x8c/0xc0 [ 20.740439] c0 3136 (Compiler) [<ffffffc00008489c>] handle_IRQ+0x48/0xac [ 20.740469] c0 3136 (Compiler) [<ffffffc000081428>] gic_handle_irq+0x38/0x7c ---------------------------------------------------------------------- Because in SMP, "mrq" has race condition between below two paths: path1: CPU0: <tasklet context> static void mmc_wait_data_done(struct mmc_request *mrq) { mrq->host->context_info.is_done_rcv = true; // // If CPU0 has just finished "is_done_rcv = true" in path1, and at // this moment, IRQ or ICache line missing happens in CPU0. // What happens in CPU1 (path2)? // // If the mmcqd thread in CPU1(path2) hasn't entered to sleep mode: // path2 would have chance to break from wait_event_interruptible // in mmc_wait_for_data_req_done and continue to run for next // mmc_request (mmc_blk_rw_rq_prep). // // Within mmc_blk_rq_prep, mrq is cleared to 0. // If below line still gets host from "mrq" as the result of // compiler, the panic happens as we traced. wake_up_interruptible(&mrq->host->context_info.wait); } path2: CPU1: <The mmcqd thread runs mmc_queue_thread> static int mmc_wait_for_data_req_done(... { ... while (1) { wait_event_interruptible(context_info->wait, (context_info->is_done_rcv || context_info->is_new_req)); static void mmc_blk_rw_rq_prep(... { ... memset(brq, 0, sizeof(struct mmc_blk_request)); This issue happens very coincidentally; however adding mdelay(1) in mmc_wait_data_done as below could duplicate it easily. static void mmc_wait_data_done(struct mmc_request *mrq) { mrq->host->context_info.is_done_rcv = true; + mdelay(1); wake_up_interruptible(&mrq->host->context_info.wait); } At runtime, IRQ or ICache line missing may just happen at the same place of the mdelay(1). This patch gets the mmc_context_info at the beginning of function, it can avoid this race condition. Signed-off-by: Jialing Fu <jlfu@marvell.com> Tested-by: Shawn Lin <shawn.lin@rock-chips.com> Fixes: 2220eedfd7ae ("mmc: fix async request mechanism ....") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: remove CONFIG_REGULATOR checkKishon Vijay Abraham I
Now that support for platforms which have optional regulator is added, remove CONFIG_REGULATOR check in omap_hsmmc. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltageKishon Vijay Abraham I
vdd voltage is set in mmc core to ios->vdd and vmmc should actually be set to this voltage. Modify omap_hsmmc_enable_supply to not take vdd as argument since now it's directly set to the voltage in ios->vdd. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias statusKishon Vijay Abraham I
Use regulator_is_enabled of pbias regulator to find pbias regulator status instead of maintaining a custom bookkeeping pbias_enabled variable. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous stateKishon Vijay Abraham I
enable vmmc_aux regulator only if it is in disabled state and disable vmmc_aux regulator only if it is in enabled state. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator stateKishon Vijay Abraham I
If the regulator is enabled on boot (checked using regulator_is_enabled), invoke regulator_enable() so that the usecount reflects the correct state of the regulator and then disable the regulator so that the initial state of the regulator is disabled. Avoid using ->set_power, since set_power also takes care of setting the voltages which is not needed at this point. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: avoid pbias regulator enable on power offKishon Vijay Abraham I
Fix omap_hsmmc_set_power so that pbias regulator is not enabled during power off. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: add separate function to set pbiasKishon Vijay Abraham I
No functional change. Cleanup omap_hsmmc_set_power by adding separate functions to set pbias and invoke it from omap_hsmmc_set_power. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: add separate functions for enable/disable supplyKishon Vijay Abraham I
No functional change. Cleanup omap_hsmmc_set_power by adding separate functions for enable/disable supply and invoke it from omap_hsmmc_set_power. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: return error if any of the regulator APIs failKishon Vijay Abraham I
Return error if any of the regulator APIs (regulator_enable, regulator_disable, regulator_set_voltage) fails in omap_hsmmc_set_power to avoid undefined behavior. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: remove unnecessary pbias set_voltageKishon Vijay Abraham I
Remove the unnecessary pbias regulator_set_voltage done after pbias regulator_disable in omap_hsmmc_set_power. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmcKishon Vijay Abraham I
No functional change. Instead of using omap_hsmmc_host's vcc and vcc_aux members, use vmmc and vqmmc present in mmc_host which is present for the same purpose. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulatorKishon Vijay Abraham I
If the vmmc regulator provides a valid ocrmask, use it. By this even if the pdata has a valid ocrmask, it will be overwritten with the ocrmask of the vmmc regulator. Also remove the unnecessary compatibility check between the ocrmask in the pdata and the ocrmask from the vmmc regulator. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()Kishon Vijay Abraham I
No functional change. Instead of using a local regulator variable in omap_hsmmc_reg_get() for holding the return value of devm_regulator_get_optional() and then assigning to omap_hsmmc_host regulator members: vcc, vcc_aux and pbias, directly use the omap_hsmmc_host regulator members. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_getKishon Vijay Abraham I
Now return error only if the return value of devm_regulator_get_optional() is not the same as -ENODEV, since with -EPROBE_DEFER, the regulator can be obtained later and all other errors are fatal. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmcKishon Vijay Abraham I
Since vmmc can be optional for some platforms, use devm_regulator_get_optional() for vmmc. Now return error only if the return value of devm_regulator_get_optional() is not the same as -ENODEV, since with -EPROBE_DEFER, the regulator can be obtained later and all other errors are fatal. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-of-at91: fix platform_no_drv_owner.cocci warningskbuild test robot
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: ludovic.desroches@atmel.com <ludovic.desroches@atmel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sh_mmcif: Fix suspend processKoji Matsuoka
The clock should be enable when SDHI registers are accessed. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: usdhi6rol0: fix error return codeJulia Lawall
Propagate error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: omap: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: usdhi6rol0: fix ack register writeRabin Vincent
The intent appears to be to clear only the bits which are set in status (by setting them to zero in the ack write), like in the other interrupt handlers, and not to always clear everything (by always writing zero). Use the correct not operator. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: usdhi6rol0: fix NULL pointer deref in debug printRabin Vincent
host->sg is only set when we're transferring multiple blocks. Check for its availibility before dereferencing it in the timeout work debug print. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: usdhi6rol0: handle probe deferral for regulatorRabin Vincent
We ignore errors from mmc_regulator_get_supply() because the usage of the regulators is optional for the driver, but we still need to check for and handle EPROBE_DEFER, like it's done in for example dw_mmc. Otherwise we might end up not using the specified regulators just because of probe order. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-of-arasan: Add the support for sdhci-5.1Shawn Lin
This patch adds the compatible string in sdhci-of-arasan.c to support sdhci-arasan5.1 version of controller. No documented controller IP version is found in the TRM, so we use ths version of command queueing engine integrated into this controller by arasan to specify our controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci: also get preset value and driver type for MMC_DDR52Jisheng Zhang
commit bb8175a8aa42 ("mmc: sdhci: clarify DDR timing mode between SD-UHS and eMMC") added MMC_DDR52 as eMMC's DDR mode to be distinguished from SD-UHS, but it missed setting driver type for MMC_DDR52 timing mode. So sometimes we get the following error on Marvell BG2Q DMP board: [ 1.559598] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 1.569314] mmcblk0: retrying using single block read [ 1.575676] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 1.585202] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 1.591818] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 1.601341] blk_update_request: I/O error, dev mmcblk0, sector 3 This patches fixes this by adding the missing driver type setting. Fixes: bb8175a8aa42 ("mmc: sdhci: clarify DDR timing mode ...") Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: atmel-mci: remove useless includeAlexandre Belloni
Definitions from linux/platform_data/atmel.h are not used, remove the include. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sunxi: fix timeout in sunxi_mmc_oclk_onoffMichal Suchanek
The 250ms timeout is too short. On my system enabling the oclk takes under 50ms and disabling slightly over 100ms when idle. Under load disabling the clock can take over 350ms. This does not make mmc clock gating look like good option to have on sunxi but the system should not crash with mmc clock gating enabled nonetheless. This patch sets the timeout to 750ms. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-sirf: corrent quirk according to real chipsBarry Song
the current quirk set is for an old FPGA, and this patch corrects quirks according to real SoC. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: block: skip trim for some kingston eMMCsShawn Lin
For some mass production of kingston eMMCs which adopt Phison's firmware will meet an unrecoverable data conrruption occasionally if performing trim due to a firmware bug confirmed by vendor. We found it on Intel-C3230RK platform. So we add fixup of broken trim for it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-esdhc-imx: change default watermark level and burst lengthHaibo Chen
By default, for all imx SoC types, the watermark level is 16, and the burst length is 8. But if the SDIO/SD/MMC I/O speed is fast enough, this default watermark level and burst length will be the performance bottleneck. For example, i.MX7D support eMMC HS400 mode, this mode can run in 8 bit, 200MHZ DDR mode. So the I/O speed improve a lot compare to SD3.0. The default burst length is 8, if we don't change this value, in HS400 mode, when we do eMMC read operation, we can find that the clock signal will stop for a period of time. This means the speed of data moving on AHB bus is slower than I/O speed. So we should improve the speed of data moving on AHB bus. This patch set the default burst length as 16, and set the default watermark level as 64. The test result is the clock signal has no stop during the eMMC HS400 operation. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Acked-by: Dong Aisheng <aisheng.dong@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-esdhc-imx: set back the burst_length_enable bit to 1Haibo Chen
Currently we find that if a usdhc is choosed to boot system, then ROM code will set the burst length enable bit of this usdhc as 0. This will make performance drop a lot if this usdhc's burst length is configed. So this patch set back the burst_length_enable bit as 1, which is the default value, and means burst length is enabled for INCR. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Acked-by: Dong Aisheng <aisheng.dong@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-esdhc-imx: add tuning-step setting supportHaibo Chen
tuning-step is the delay cell steps in tuning procedure. The default value of tuning-step is 1. Some boards or cards need another value to pass the tuning procedure. For example, imx7d-sdb board need the tuning-step value as 2, otherwise it can't pass the tuning procedure. So this patch add the tuning-step setting in driver, so that user can set the tuning-step value in dts. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Acked-by: Dong Aisheng <aisheng.dong@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-esdhc-imx: add imx7d support and support HS400Haibo Chen
The imx7d usdhc is derived from imx6sx, the difference is that imx7d support HS400. So introduce a new compatible string for imx7d and add HS400 support for imx7d usdhc. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Acked-by: Dong Aisheng <aisheng.dong@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-of-esdhc: add workaround for pre divider initial valueYangbo Lu
For eSDHC(version < 2.3), the pre divider only could divide base clock by 2 at least. Add workaround for this to avoid unexpected issue. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Fixes: bd455029d01c ("mmc: sdhci-of-esdhc: Pre divider starts at 1") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci: fix dma memory leak in sdhci_pre_req()Haibo Chen
Currently one mrq->data maybe execute dma_map_sg() twice when mmc subsystem prepare over one new request, and the following log show up: sdhci[sdhci_pre_dma_transfer] invalid cookie: 24, next-cookie 25 In this condition, mrq->date map a dma-memory(1) in sdhci_pre_req for the first time, and map another dma-memory(2) in sdhci_prepare_data for the second time. But driver only unmap the dma-memory(2), and dma-memory(1) never unmapped, which cause the dma memory leak issue. This patch use another method to map the dma memory for the mrq->data which can fix this dma memory leak issue. Fixes: 348487cb28e6 ("mmc: sdhci: use pipeline mmc requests to improve performance") Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: host: use of_property_read_bool()Sergei Shtylyov
Use more compact of_property_read_bool() calls instead of the of_find_property() calls. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: sdhci-pci: set the clear transfer mode register quirk for O2MicroAdam Lee
This patch fixes MMC not working issue on O2Micro/BayHub Host, which requires transfer mode register to be cleared when sending no DMA command. Signed-off-by: Peter Guo <peter.guo@bayhubtech.com> Signed-off-by: Adam Lee <adam.lee@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-27mmc: core: Fixed bug in one erase-group budget TRIMRobin van der Gracht
When requesting a trim for several bytes, everything up to the next erase-group is erased. This causes data corruption. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-24mmc: tmio: Fix timeout value for command requestTakeshi Kihara
Fix the problem which timeout occurs at the time of command request with several cards. The timeout value was insufficient as a verification of several cards, so it was changed 5 seconds from 2 seconds. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-24mmc: sdhci-of-at91: introduce driver for the Atmel SDMMCludovic.desroches@atmel.com
Introduce driver for he Atmel SDMMC available on sama5d2. It is a sdhci compliant controller. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-24mmc: sdhci: switch from programmable clock mode to divided one if neededludovic.desroches@atmel.com
In programmable mode, if the clock frequency is too high, the divider can be too small to meet the clock frequency requirement especially to init the SD card. In this case, switch to the divided clock mode. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17scatterlist: remove open coded sg_unmark_end instancesDan Williams
Signed-off-by: Dan Williams <dan.j.williams@intel.com> [hch: split from a larger patch by Dan] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17mmc: dw_mmc: add quirk for broken data transfer over schemeAddy Ke
This patch add a new quirk to add a s/w timer to notify the driver to terminate current transfer and report a data timeout to the core, if DTO interrupt does NOT come within the given time. dw_mmc call mmc_request_done func to finish transfer depends on DTO interrupt. If DTO interrupt does not come in sending data state, the current transfer will be blocked. We got the reply from synopsys: There are two counters but both use the same value of [31:8] bits. Data timeout counter doesn't wait for stop clock and you should get DRTO even when the clock is not stopped. Host Starvation timeout counter is triggered with stop clock condition. This means that host should get DRTO and DTO interrupt. But this case really exists, when driver reads tuning data from card on RK3288-pink2 board. I measured waveforms by oscilloscope and found that card clock was always on and data lines were always holded high level in sending data state. There are two possibility that data over interrupt doesn't come in reading data state on RK3X SoCs: - get command done interrupt, but doesn't get any data-related interrupt. - get data error interrupt, but doesn't get data over interrupt. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17mmc: dw_mmc: print the message for deprecated propertyJaehoon Chung
supports-highspeed was deprecated. If someone use it, we need to notice information for it. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17mmc: dw_mmc: remove the unused blk_settingJaehoon Chung
"blk_setting" doesn't use anywhere. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17mmc: dw_mmc: fix the wrong condition checkingJaehoon Chung
When num-slots is lower than 1, it's right that should be returned -ENODEV. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>