summaryrefslogtreecommitdiff
path: root/drivers/net/b44.c
AgeCommit message (Collapse)Author
2010-12-01b44: fix workarround for wap54g10Hauke Mehrtens
The code for the b44_wap54g10_workaround was never included, because the config option was wrong. The nvram_get function was never in mainline kernel, only in external OpenWrt patches. The code should be compiled in when CONFIG_BCM47XX is selected and not when CONFIG_SSB_DRIVER_MIPS is selected, because nvram_getenv is only available on bcm47xx platforms and now in the mainline kernel code. Using an include is better than a second function declaration, to fix this when the function signature changes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
2010-10-21b44: fix resume, request_irq after hw resetJames Hogan
On resume, call request_irq() after resetting the hardware rather than before. It's a shared interrupt so the handler could be called immediately if another device on the same irq interrupts (and will be called immediately if CONFIG_DEBUG_SHIRQ=y), but unless the hardware is reinitialised with b44_init_hw() the read of the interrupt status register will hang the system. Signed-off-by: James Hogan <james@albanarts.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11b44: fix carrier detection on bindPaul Fertser
For carrier detection to work properly when binding the driver with a cable unplugged, netif_carrier_off() should be called after register_netdev(), not before. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/main.c
2010-09-07PATCH: b44 Handle RX FIFO overflow better (simplified)Mark Lord
This patch is a simplified version of the original patch from James Courtier-Dutton. >From: James Courtier-Dutton >Subject: [PATCH] Fix b44 RX FIFO overflow recovery. >Date: Wednesday, June 30, 2010 - 1:11 pm > >This patch improves the recovery after a RX FIFO overflow on the b44 >Ethernet NIC. >Before it would do a complete chip reset, resulting is loss of link >for a few seconds. >This patch improves this to do recovery in about 20ms without loss of link. > >Signed off by: James@superbug.co.uk Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03drivers/net: avoid some skb->ip_summed initializationsEric Dumazet
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08b44: remove unused dma_desc_align_maskFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04b44: replace the ssb_dma API with the generic DMA APIFUJITA Tomonori
Note that dma_sync_single_for_device and dma_sync_single_for_cpu support a partial sync. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Gary Zambrano <zambrano@broadcom.com> Acked-by: Michael Buesch <mb@bu3sch.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10net: trans_start cleanupsEric Dumazet
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-03net: convert multicast list to list_headJiri Pirko
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-22net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22b44: use netdev_alloc_skb instead of dev_alloc_skbHauke Mehrtens
The conversion in bf0dcbd929faf036f1a4f2918090344d0e249cf5 missed the new allocation in b44_rx. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22b44: Set PHY address to NO_PHY if reset fails.Hauke Mehrtens
Do a PHY reset to test if there is an active phy and set the PHY address to B44_PHY_ADDR_NO_PHY in case of an not active phy. This is needed for the Linksys WRTSL54GS and Asus WL-500W. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17b44: Ratelimit timeout error message.Jochen Friedrich
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-09b44 WOL setup: one-bit-off stack corruption kernel panic fixStanislav Brabec
About 50% of shutdowns of b44 Ethernet adapter ends by kernel panic with kernels compiled with stack-protector. Checking b44_magic_pattern() return values, one call of b44_magic_pattern() returns 127. It means, that set_bit(128, pmask) was called on line 1509. It means that bit 0 of 17th byte of pmask was overwritten. But pmask has only 16 bytes. Stack corruption happens. It seems that set_bit() on line 1509 always writes one bit off. The fix does not only solve the stack corruption, but also makes Wake On LAN working on my onboard B44 on Asus A7V-333X mainboard. It seems that this problem affects all kernel versions since commit 725ad800 ([PATCH] b44: add wol for old nic) on 2006-06-20. Signed-off-by: Stanislav Brabec <sbrabec@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-30b44: Fix wedge when using netconsole.David S. Miller
Fixes kernel bugzilla #14691 Due to the way netpoll works, it is perfectly legal to see NAPI already scheduled when new device events are pending in b44_interrupt(). So logging a message about it is wrong and in fact harmful. Based upon a patch by Andreas Mohr. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17b44: the poll handler b44_poll must not enable IRQ unconditionallyDongdong Deng
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when it is available. As netconsole can be used from almost any context, IRQ must not be enabled blindly in the NAPI handler of the driver which supports netpoll. Call trace: netpoll_send_skb() { local_irq_save(flags) -> netpoll_poll() -> poll_napi() -> poll_one_napi() -> napi->poll() -> b44_poll() local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09b44/b43/b43legacy: Fix switch warnings introduced by SSB-SDIOMichael Buesch
This fixes some gcc warnings for switch statements. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/yellowfin.c
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of spin_lock_irq() and spin_unlock_irq() in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use spin_lock_irqsave() and spin_unlock_restore() to prevent the irqs from getting enabled while in netpoll_send_skb(). Call trace: netpoll_send_skb() { -> local_irq_save(flags) ---> dev->ndo_start_xmit(skb, dev) ---> spin_lock_irq() ---> spin_unlock_irq() *******here would enable the interrupt. ... -> local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02drivers/net: Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20b44: strncpy does not null terminate stringroel kluin
strlcpy() will always null terminate the string. Also use the sizeof(version) to strlcopy() the version string. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: use netdev stats in b44, sundance, via-rhine and via-velocityEric Dumazet
Use struct net_device_stats provided in struct net_device instead of private ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)Yang Hongyang
Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07b44: Use kernel DMA addresses for the kernel DMA APIMichael Buesch
We must not use the device DMA addresses for the kernel DMA API, because device DMA addresses have an additional offset added for the SSB translation. Use the original dma_addr_t for the sync operation. Cc: stable@kernel.org Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()Michael Buesch
> > ------------[ cut here ]------------ > > WARNING: at lib/dma-debug.c:539 check_sync+0xe9/0x341() (Not tainted) > > Hardware name: HP Compaq nx6110 (PY501EA#AB9) > > b44 0000:02:0e.0: DMA-API: device driver tries to sync DMA memory it has not > > allocated [device address=0x0000000075941040] [size=1566 bytes] > > Modules linked in: llc bnep l2cap bluetooth autofs4 lm90 hwmon i2c_i801 sunrpc > > ipv6 cpufreq_ondemand acpi_cpufreq uinput snd_intel8x0m snd_intel8x0 > > snd_ac97_codec snd_seq_dummy ac97_bus snd_seq_oss snd_seq_midi_event snd_seq > > snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm b44 ssb firewire_ohci > > snd_timer ipw2200 iTCO_wdt mii firewire_core snd iTCO_vendor_support libipw > > yenta_socket crc_itu_t lib80211 rsrc_nonstatic soundcore snd_page_alloc joydev > > pcspkr wmi serio_raw ata_generic pata_acpi i915 drm i2c_algo_bit i2c_core video > > output [last unloaded: scsi_wait_scan] > > Pid: 2418, comm: S58ntpd Not tainted 2.6.29-16.fc10.i686.PAE #1 > > Call Trace: > > [<c04396d1>] warn_slowpath+0x7c/0xbd > > [<c0457fe1>] ? register_lock_class+0x17/0x290 > > [<c0458d61>] ? mark_lock+0x1e/0x349 > > [<c0556448>] ? _raw_spin_unlock+0x74/0x78 > > [<c0458d61>] ? mark_lock+0x1e/0x349 > > [<c055a060>] ? check_sync+0x37/0x341 > > [<c055a112>] check_sync+0xe9/0x341 > > [<c0711245>] ? _spin_unlock_irqrestore+0x45/0x55 > > [<c04592db>] ? trace_hardirqs_on+0xb/0xd > > [<c055a4d1>] debug_dma_sync_single_for_device+0x2f/0x39 > > [<f828f722>] dma_sync_single_for_device+0x4a/0x59 [b44] > > [<f828f76f>] ssb_dma_sync_single_for_device+0x3e/0x48 [b44] > > [<f8291d1e>] b44_recycle_rx+0x18c/0x196 [b44] > > [<f8291f9f>] b44_poll+0x277/0x3c0 [b44] > > [<c0687bb9>] net_rx_action+0xa1/0x1ca > > [<c043e30a>] __do_softirq+0x9d/0x154 > > [<c043e413>] do_softirq+0x52/0x7e > > [<c043e56f>] irq_exit+0x49/0x77 > > [<c040b22e>] do_IRQ+0x97/0xad > > [<c0409dac>] common_interrupt+0x2c/0x34 I don't know if this is related, but the following patch seems to fix some DMA mapping bug. Can somebody comment who does understand the code better than me? (completely untested) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c net/8021q/vlan_core.c net/core/dev.c
2009-02-27b44: Disable device on shutdownMichael Buesch
Disable the SSB core on device shutdown. This has two advantages: 1) A clean device shutdown is always desired here, because we disable the device's global crystal in the next statement. 2) This fixes a bug where the device will come up with the enable-bit set on the next initialization (without a reboot inbetween). This causes breakage on the second initialization due to code that checks this bit (ssb_device_is_enabled() checks). Reported-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27b44: Unconditionally enable interrupt routing on resetMichael Buesch
Unconditionally setup the IRQ routing on chip reset. It's safe to call ssb_pcicore_dev_irqvecs_enable() unconditionally, because it has internal checks for redundant calls. This fixes problems where hardware will not come up properly due to quirks in the enable-bit hardware. Reported-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10netdev: Use __netdev_alloc_skb() instead of __dev_alloc_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15b44: GFP_DMA skb should not escape from driverEric Dumazet
b44 chip has some hardware limitations, that need GFP_DMA bounce buffers in some situations. In order to not deplete DMA zone, we should keep allocated GFP_DMA skb only for driver use. At rx time, we copy such skb to newly allocated skb, reusing existing copybreak infrastructure. On machines with low amount of memory, all skb meet the hardware limitation, so no copy is needed. We detect this situation using a new device flag, set to one if one GFP_DMA skb was ever allocated by b44_alloc_rx_skb(). Previously allocated skb, even outside from DMA zone will then be recycled, to have minimal impact on DMA zone use. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Tested-by: Ionut Leonte <ionut.leonte@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11b44: fix misalignment and wasted space in rx handlingFelix Fietkau
Broadcom 4400 puts a header of configurable size (apparently needs to be at least 28 bytes) in front of received packets. When handling this, the previous code accidentally added the offset 30 *twice* for the software and once for the hardware, thereby cancelling out the IP alignment effect of the 30 byte padding and wasting an additional 30 bytes of memory per packet. This patch fixes this problem and improves routing throughput by about 30% on MIPS, where unaligned access is expensive. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08b44: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26net: Fix warning fallout from recent NAPI interface changes.David S. Miller
When we removed the network device argument from several NAPI interfaces in 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-23net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-27ssb, b43, b43legacy, b44: Rewrite SSB DMA APIMichael Buesch
This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-15ssb: Fix usage of struct device used for DMAingMichael Buesch
This fixes DMA on architectures where DMA is nontrivial, like PPC64. We must use the host-device's (PCI) struct device for any DMA operation instead of the SSB device. For this we add a new struct device pointer to the SSB device structure that will always point to the right device for DMAing. Without this patch b43 and b44 drivers won't work on complex-DMA architectures, that for example need dev->archdata for DMA operations. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-26b44: Truncate PHY addressMichael Buesch
Some ROMs on embedded devices store incorrect values for the PHY address of the ethernet device. It looks like the number is sign-extended. Truncate the value by applying the PHY-address mask to it. The patch was tested on a bcm47xx embedded system (where the bug triggers) and a bcm4400 PCI card. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28b44: power down PHY when interface downMiguel Botón
This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted to the 'b44' ssb driver. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b44: Convert to use of the new SPROM structureLarry Finger
The b44 driver is changed to use the new SPROM data structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>