summaryrefslogtreecommitdiff
path: root/drivers/net/cxgb3/sge.c
AgeCommit message (Collapse)Author
2011-08-11chelsio: Move the Chelsio driversJeff Kirsher
Moves the drivers for the Chelsio chipsets into drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile changes. CC: Divy Le Ray <divy@chelsio.com> CC: Dimitris Michailidis <dm@chelsio.com> CC: Casey Leedom <leedom@chelsio.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-21cxgb3: do vlan cleanupJiri Pirko
- unify vlan and nonvlan rx path - kill pi->vlan_grp and vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-25cxgb3: skb_record_rx_queue now records the queue index relative to the ↵John (Jay) Hernandez
net_device. Fixed call to skb_record_rx_queue where we were passing the queue index relative to the adapter when it should have been relative to the net_device. Signed-off-by: John (Jay) Hernandez <jay@chelsio.com> Signed-off-by: Divy Le Ray <divy@chelsio.com> Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18net: cxgb3: convert to hw_featuresMichał Mirosław
This removes some of the remnants of LRO -> GRO conversion. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-10-28cxgb3: Fix panic in free_tx_desc()Krishna Kumar
I got a few of these panics (on 2.6.36-rc7) when running high number of netperf sessions: BUG: unable to handle kernel paging request at 0000100000000000 IP: [<ffffffff813125f0>] skb_release_data+0xa0/0xd0 Oops: 0000 [#1] SMP Pid: 2155, comm: vhost-2115 Not tainted 2.6.36-rc7-ORG #1 49Y6512 /System x3650 M2 -[7947AC1]- RIP: 0010:[<ffffffff813125f0>] [<ffffffff813125f0>] skb_release_data+0xa0/0xd0 RSP: 0018:ffff880001803738 EFLAGS: 00010206 RAX: ffff880179b0fc00 RBX: ffff880178b441c0 RCX: 0000000000000000 RSP: 0018:ffff880001803738 EFLAGS: 00010206 RAX: ffff880179b0fc00 RBX: ffff880178b441c0 RCX: 0000000000000000 RDX: ffff880179b0fd40 RSI: 0000000000000000 RDI: 0000100000000000 RBP: ffff880001803748 R08: 0000000000000001 R09: ffff88017f117000 R10: ffff88017b990608 R11: ffff88017f117090 R12: ffff880178b441c0 R13: ffff88017f117090 R14: 0000000000000000 R15: ffff880178b441c0 FS: 0000000000000000(0000) GS:ffff880001800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000100000000000 CR3: 000000017ea64000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process vhost-2115 (pid: 2155, threadinfo ffff88017d872000, task ffff88017e954680) Stack: ffff880178b441c0 0000000000000007 ffff880001803768 ffffffff81312119 <0> 0000000000000000 0000000000000002 ffff880001803778 ffffffff813121f9 <0> ffff880001803818 ffffffffa012d14c ffffffffa02de076 ffff880001803700 Call Trace: <IRQ> [<ffffffff81312119>] __kfree_skb+0x19/0xa0 [<ffffffff813121f9>] kfree_skb+0x19/0x40 [<ffffffffa012d14c>] free_tx_desc+0x2fc/0x350 [cxgb3] [<ffffffffa02de076>] ? vhost_poll_wakeup+0x16/0x20 [vhost_net] [<ffffffffa01323db>] t3_eth_xmit+0x28b/0x380 [cxgb3] [<ffffffff8131ce47>] dev_hard_start_xmit+0x377/0x5a0 [<ffffffff81335a4a>] sch_direct_xmit+0xfa/0x1d0 [<ffffffff8131d1a9>] dev_queue_xmit+0x139/0x450 [<ffffffff81326225>] neigh_resolve_output+0x125/0x340 [<ffffffff8135a77c>] ip_finish_output+0x14c/0x320 [<ffffffff8135a9fe>] ip_output+0xae/0xc0 [<ffffffff8135620f>] ip_forward_finish+0x3f/0x50 [<ffffffff8135641f>] ip_forward+0x1ff/0x400 [<ffffffff81354789>] ip_rcv_finish+0x119/0x3e0 [<ffffffff81354c7d>] ip_rcv+0x22d/0x300 [<ffffffff8131a95b>] __netif_receive_skb+0x29b/0x570 [<ffffffff8131ba70>] ? netif_receive_skb+0x0/0x80 [<ffffffff8131bae8>] netif_receive_skb+0x78/0x80 [<ffffffffa02a96d8>] br_handle_frame_finish+0x198/0x260 [bridge] [<ffffffffa02aebc8>] br_nf_pre_routing_finish+0x238/0x380 [bridge] [<ffffffff813424bc>] ? nf_hook_slow+0x6c/0x100 [<ffffffffa02ae990>] ? br_nf_pre_routing_finish+0x0/0x380 [bridge] [<ffffffffa02afb08>] br_nf_pre_routing+0x698/0x7a0 [bridge] [<ffffffff81342414>] nf_iterate+0x64/0xa0 [<ffffffffa02a9540>] ? br_handle_frame_finish+0x0/0x260 [bridge] [<ffffffff813424bc>] nf_hook_slow+0x6c/0x100 [<ffffffffa02a9540>] ? br_handle_frame_finish+0x0/0x260 [bridge] [<ffffffffa02a9931>] br_handle_frame+0x191/0x240 [bridge] [<ffffffffa02a97a0>] ? br_handle_frame+0x0/0x240 [bridge] [<ffffffff8131a863>] __netif_receive_skb+0x1a3/0x570 [<ffffffff812ef3f6>] ? dma_issue_pending_all+0x76/0xa0 [<ffffffff8131ad32>] process_backlog+0x102/0x200 [<ffffffff8131c2d0>] net_rx_action+0x100/0x220 [<ffffffff810548ef>] __do_softirq+0xaf/0x140 [<ffffffff8100bcdc>] call_softirq+0x1c/0x30 [<ffffffff8100dfc5>] ? do_softirq+0x65/0xa0 [<ffffffff8131c6b8>] netif_rx_ni+0x28/0x30 [<ffffffffa02c305d>] tun_sendmsg+0x2cd/0x4b0 [tun] [<ffffffffa02e01af>] handle_tx+0x1df/0x340 [vhost_net] [<ffffffffa02e0340>] handle_tx_kick+0x10/0x20 [vhost_net] [<ffffffffa02de29b>] vhost_worker+0xbb/0x130 [vhost_net] [<ffffffffa02de1e0>] ? vhost_worker+0x0/0x130 [vhost_net] [<ffffffffa02de1e0>] ? vhost_worker+0x0/0x130 [vhost_net] [<ffffffff81069686>] kthread+0x96/0xa0 [<ffffffff8100bbe4>] kernel_thread_helper+0x4/0x10 [<ffffffff810695f0>] ? kthread+0x0/0xa0 [<ffffffff8100bbe0>] ? kernel_thread_helper+0x0/0x10 Code: 8b 94 24 d0 00 00 00 49 8b 84 24 d8 00 00 00 48 8d 14 10 0f b7 0a 39 d9 7f d1 48 8b 7a 10 48 85 ff 74 20 48 c7 42 10 00 00 00 00 <48> 8b 1f e8 e8 fb ff ff 48 85 db 48 89 df 75 f0 49 8b 84 24 d8 Patch below fixes the panic. cxgb4 and cxgb4vf already have this fix. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21cxgb3: function namespace cleanupstephen hemminger
Make local functions static. Remove functions that are defined and never used. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03drivers/net: avoid some skb->ip_summed initializationsEric Dumazet
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09cxgb3: simplify need_skb_unmapFUJITA Tomonori
We can use CONFIG_NEED_DMA_MAP_STATE to see if a platform does real DMA unmapping. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13cxgb3: use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits) IB/srp: Clean up error path in srp_create_target_ib() IB/srp: Split send and recieve CQs to reduce number of interrupts RDMA/nes: Add support for KR device id 0x0110 IB/uverbs: Use anon_inodes instead of private infinibandeventfs IB/core: Fix and clean up ib_ud_header_init() RDMA/cxgb3: Mark RDMA device with CXIO_ERROR_FATAL when removing RDMA/cxgb3: Don't allocate the SW queue for user mode CQs RDMA/cxgb3: Increase the max CQ depth RDMA/cxgb3: Doorbell overflow avoidance and recovery IB/core: Pack struct ib_device a little tighter IB/ucm: Clean whitespace errors IB/ucm: Increase maximum devices supported IB/ucm: Use stack variable 'base' in ib_ucm_add_one IB/ucm: Use stack variable 'devnum' in ib_ucm_add_one IB/umad: Clean whitespace IB/umad: Increase maximum devices supported IB/umad: Use stack variable 'base' in ib_umad_init_port IB/umad: Use stack variable 'devnum' in ib_umad_init_port IB/umad: Remove port_table[] IB/umad: Convert *cdev to cdev in struct ib_umad_port ...
2010-02-24RDMA/cxgb3: Doorbell overflow avoidance and recoverySteve Wise
T3 hardware doorbell FIFO overflows can cause application stalls due to lost doorbell ring events. This has been seen when running large NP IMB alltoall MPI jobs. The T3 hardware supports an xon/xoff-type flow control mechanism to help avoid overflowing the HW doorbell FIFO. This patch uses these interrupts to disable RDMA QP doorbell rings when we near an overflow condition, and then turn them back on (and ring all the active QP doorbells) when when the doorbell FIFO empties out. In addition if an doorbell ring is dropped by the hardware, the code will now recover. Design: cxgb3: - enable these DB interrupts - in the interrupt handler, schedule work tasks to call the ULPs event handlers with the new events. - ring all the qset txqs when an overflow is detected. iw_cxgb3: - disable db ringing on all active qps when we get the DB_FULL event - enable db ringing on all active qps and ring all active dbs when we get the DB_EMPTY event - On DB_DROP event: - disable db rings in the event handler - delay-schedule a work task which rings and enables the dbs on all active qps. - in post_send and post_recv logic, don't ring the db if it's disabled. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-09cxgb3: fix GRO checksum checkDivy Le Ray
Verify the HW checksum state for frames handed to GRO processing. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-05Fix spelling of 'platform' in comments and docStefan Weil
Replace platfrom -> platform. This is a frequent spelling bug. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-04cxgb3: add memory barriersDivy Le Ray
Add memory barriers to fix crashes observed on newest PowerPC platforms. The HW and driver state of the receive rings were getting out of sync. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/sfe4001.c drivers/net/wireless/libertas/cmd.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/rtl8187se/Kconfig drivers/staging/rtl8192e/Kconfig
2009-11-18cxgb3: fix premature page unmapDivy Le Ray
unmap Rx page only when guaranteed that this page won't be used anymore to allocate rx page chunks. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27cxgb3: Set the rxqKrishna Kumar
Set the rxq# for LRO when processing the last fragment of a frame. This helps in fast txq selection for routing workloads. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18cxgb3: No need to wake queue in xmit handlerKrishna Kumar
The xmit handler doesn't need to wake the queue after stopping it temporarily (some other drivers are doing the same). Patch on net-next-2.6, multiple netperf sessions tested. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13cxgb3: Added private MAC address and provisioning packet handler for iSCSIKaren Xie
This patch added support of private MAC address per port and provisioning packet handler for iSCSI traffic only. The above changes are isolated to the cxgb3 driver, independent of any scsi or iscsi driver changes. Acked-by: Karen Xie <kxie@chelsio.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/forcedeth.c
2009-05-29cxgb3: move away from LLTXDivy Le Ray
cxgb3 no longer advertizes LLTX. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: fix dma mapping regressionDivy Le Ray
Commit 5e68b772e6efd189d6aca76f6872fb75d51ace60 cxgb3: map entire Rx page, feed map+offset to Rx ring. introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR() and related macros as no-ops. Rx descriptors are fed with the a page buffer bus address + page chunk offset. The page buffer bus address is set and retrieved through pci_unamp_addr_set(), pci_unmap_addr(). These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set). The HW ends up with a bogus bus address. This patch saves the page buffer bus address for all plaftorms. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_start in 10GB driversEric Dumazet
Followup of commits 9d21493b4beb8f918ba248032fefa393074a5e2b and 08baf561083bc27a953aa087dd8a664bb2b88e8e (net: tx scalability works : trans_start) (net: txq_trans_update() helper) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Multi queue drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers (vxge & tehuti) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16gro: New frags interface to avoid copying shinfoHerbert Xu
It turns out that copying a 16-byte area at ~800k times a second can be really expensive :) This patch redesigns the frags GRO interface to avoid copying that area twice. The two disciples of the frags interface have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27cxgb3: map entire Rx page, feed map+offset to Rx ring.Divy Le Ray
DMA mapping can be expensive in the presence of iommus. Reduce the Rx iommu activity by mapping an entire page, and provide the H/W the mapped address + offset of the current page chunk. Reserve bits at the end of the page to track mapping references, so the page can be unmapped. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27cxgb3: sge setup fixesDivy Le Ray
Enable timestamps, update delayed ack threshold for iSCSI/iWARP traffic Remove the len flag in Tx requests. It might corrupt offload trace packets. Update SGE context setup to avoid potential H/W misprogrammation. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27cxgb3: start qset timers when setup succeededDivy Le Ray
Start queue set reclaim timers after the queue sets have been allocated successfully. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13cxgb3: disable high freq non-data interruptsDivy Le Ray
Under RX pressure, The HW might generate a high load of interrupts to signal mac fifo or free lists overflow. Disable the interrupts, and poll the relevant status bits to maintain stats. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13cxgb3: separate TX and RX reclaim handlersDivy Le Ray
Separate TX and RX reclaim handlers Don't disable interrupts in RX reclaim handler. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13cxgb3: prefetch buffer access in GRO modeDivy Le Ray
Elmininate a cache miss when accessing the CPL header within the first aggregated buffer. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13cxgb3: fix skb truesize in jumbo modeDivy Le Ray
Update skb truesize correctly for the 2nd buffer from a Jumbo frame Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13cxgb3: release page ref on mapping errorDivy Le Ray
Release page chunk reference in case we fail to map it. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13cxgb3: ring rx door bell less frequentlyDivy Le Ray
Ring free lists door bell less frequently, specifically every quarter of the active FL size. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-02-05cxgb3: Fix lro switchDivy Le Ray
The LRO switch is always set to 1 in the rx processing loop. It breaks the accelerated iSCSI receive traffic. Fix its computation. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-28net: Add skb_record_rx_queue() calls to multiqueue capable drivers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21cxgb3: Replace LRO with GROHerbert Xu
This patch makes cxgb3 invoke the GRO hooks instead of LRO. As GRO has a compatible external interface to LRO this is a very straightforward replacement. I've kept the ioctl controls for per-queue LRO switches. However, we should not encourage anyone to use these. Because of that, I've also kept the skb construction code in cxgb3. Hopefully we can phase out those per-queue switches and then kill this too. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20cxgb3: Fix LRO misalignmentDivy Le Ray
The lro manager's frag_align_pad setting was missing, leading to misaligned access to the skb passed up to the stack. Tested-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11cxgb3: Keep LRO off if disabled when interface is downRoland Dreier
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are part of a Linux bridge. Recently I updated the kernel and discovered that things stopped working because cxgb3 was doing LRO on packets that were passed into the bridge code for forwarding. (Incidentally, this problem manifested itself in a strange way that made debugging a bit interesting -- for some reason, the skb_warn_if_lro() check in bridge didn't trigger and these LROed packets were forwarded out a forcedeth interface, and caused the forcedeth transmit path to get stuck) This is because cxgb3 has no way of keeping state for the LRO flag until the interface is brought up, so if the bridging code disables LRO while the interface is down, then cxgb3_up() will just reenable LRO, and on my Debian system at least, the init scripts add interfaces to a bridge before bringing the interfaces up. Fix this by keeping track of each interface's LRO state in cxgb3 so that when bridge disables LRO, it stays disabled in cxgb3_up() when the interface is brought up. I did this by changing the rx_csum_offload flag into a pair of bit flags; the effect of this on the rx_eth() fast path is miniscule enough that it should be fine (eg on x86, a cmpb instruction becomes a testb instruction). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-19cxgb3: manage private iSCSI IP addressKaren Xie
The accelerated iSCSI traffic could use a private IP address unknown to the OS: - The IP address is required in both drivers to manage ARP requests and connection set up. - Added an control call to retrieve the ip address. - Reply to ARP requests dedicated to the private IP address. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-09-21 09:35:25 (GMT)