summaryrefslogtreecommitdiff
path: root/drivers/net/team
AgeCommit message (Collapse)Author
2012-04-21team: add per-port option for enabling/disabling portsJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21team: allow to enable/disable portsJiri Pirko
This patch changes content of hashlist (used to get port struct by computed index (0...en_port_count-1)). Now the hash list contains only enabled ports so userspace will be able to say what ports can be used for tx/rx. This becomes handy when userspace will need to disable ports which does not belong to active aggregator. By default, newly added port is enabled. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21team: lb: let userspace care about port macsJiri Pirko
Better to leave this for userspace Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add missed "statics"Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: ab: walk through port list non-rcuJiri Pirko
Since team->lock is being held, _rcu variant make no sense. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add user_linkup and user_linkup_enabled per-port optionJiri Pirko
Allows userspace to setup linkup for ports. Default is to take linkup directly from ethtool state. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add bool option typeJiri Pirko
Add another (hopefully last) option type. Use NLA_FLAG to implement that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add support for per-port optionsJiri Pirko
This patch allows to create per-port options. That becomes handy for all sorts of stuff, for example for userspace driven link-state, 802.3ad implementation and so on. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05team: add loadbalance modeJiri Pirko
This patch introduces new team mode. It's TX port is selected by user-set BPF hash function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05team: add binary option typeJiri Pirko
For transfering generic binary data (e.g. BPF code), introduce new binary option type. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02team: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24team: send only changed options/ports via netlinkJiri Pirko
This patch changes event message behaviour to send only updated records instead of whole list. This fixes bug on which userspace receives non-actual data in case multiple events occur in row. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09team: use vlan_vids_[addr/del]_by_devJiri Pirko
So far when vlan id was added to team device befor port was added, this vid was not added to port's vlan filter. Also after removal, vid stayed in port device's vlan filter. Benefit of new vlan functions to handle this work. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09net: introduce vlan_vid_[add/del] and use them instead of direct ↵Jiri Pirko
[add/kill]_vid ndo calls This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23net: treewide use of RCU_INIT_POINTEREric Dumazet
rcu_assign_pointer(ptr, NULL) can be safely replaced by RCU_INIT_POINTER(ptr, NULL) (old rcu_assign_pointer() macro was testing the NULL value and could omit the smp_wmb(), but this had to be removed because of compiler warnings) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18team: replace kmalloc+memcpy by kmemdupJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18team: avoid using variable-length arrayJiri Pirko
Apparently using variable-length array is not correct (https://lkml.org/lkml/2011/10/23/25). So remove it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18team: add fix_featuresJiri Pirko
do fix features in similar way as bonding code does Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16team: replicate options on registerJiri Pirko
Since multiple team instances are putting defined options into their option list, during register each option must be cloned before added into list. This resolves uncool memory corruptions when using multiple teams. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16team: convert overall spinlock to mutexJiri Pirko
No need to have spinlock for this purpose. So convert this to mutex and avoid current schedule while atomic problems in netlink code. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16team: Do not hold rcu_read_lock when running netlink cmdsJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13net: introduce ethernet teaming deviceJiri Pirko
This patch introduces new network device called team. It supposes to be very fast, simple, userspace-driven alternative to existing bonding driver. Userspace library called libteam with couple of demo apps is available here: https://github.com/jpirko/libteam Note it's still in its dipers atm. team<->libteam use generic netlink for communication. That and rtnl suppose to be the only way to configure team device, no sysfs etc. Python binding of libteam was recently introduced. Daemon providing arpmon/miimon active-backup functionality will be introduced shortly. All what's necessary is already implemented in kernel team driver. v7->v8: - check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling them. - use dev_kfree_skb_any() instead of dev_kfree_skb() v6->v7: - transmit and receive functions are not checked in hot paths. That also resolves memory leak on transmit when no port is present v5->v6: - changed couple of _rcu calls to non _rcu ones in non-readers v4->v5: - team_change_mtu() uses team->lock while travesing though port list - mac address changes are moved completely to jurisdiction of userspace daemon. This way the daemon can do FOM1, FOM2 and possibly other weird things with mac addresses. Only round-robin mode sets up all ports to bond's address then enslaved. - Extended Kconfig text v3->v4: - remove redundant synchronize_rcu from __team_change_mode() - revert "set and clear of mode_ops happens per pointer, not per byte" - extend comment of function __team_change_mode() v2->v3: - team_change_mtu() uses rcu version of list traversal to unwind - set and clear of mode_ops happens per pointer, not per byte - port hashlist changed to be embedded into team structure - error branch in team_port_enter() does cleanup now - fixed rtln->rtnl v1->v2: - modes are made as modules. Makes team more modular and extendable. - several commenters' nitpicks found on v1 were fixed - several other bugs were fixed. - note I ignored Eric's comment about roundrobin port selector as Eric's way may be easily implemented as another mode (mode "random") in future. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>